RUEI 12.1.0.3.0 - Collectors Status Okay but Last Update time not updated

Hi all,
Under System > Status > Collectors Status
Status shows OK but Last Update Time is not updated. The last update time is frozen.
Anyone has a similar experience? Would someone help, please?
Regards,
Nathan

Hi Nathan,
that seems odd indeed. would not know the cause or any sensibl explaination unless I have system details, Can you pls file an SR for this issue and upload the helpdesk file to the SR?
a helpdesk file is created under system >>maintenance>>helpdesk report
It will create a zip file that we can read in support, see the events the system is capturing, analyze your configuration. That will allow us for very quick follow up. if you want me to track it internally at Oracle pls send me the SR# in a direct mail: [email protected] -- I'm the responsible product manager for RUEI so happy to follow up on this.
R, jurgen

Similar Messages

  • PGI status at delivery header level has not updated

    Dear Friends,
    We had created deliver, picking was completed and PGI was completed successfully. However when we try to create Billing, an error occurs stating that PGI is not completed.
    Further when we check the delivery, the Goods Issue status at item level is completed but at the Header level the GM is B which is partially completed. In the Document flow we can see the PGI Status is completed.
    I think there might be some table which was not update. Is there any way to update the status in the delivery?
    Further we tried to reverse the PGI through VL09, but system is not able to find the delivery ..this might be because the system might be checking in some table where the statues has not updated.
    Please suggest me how should I complete this.

    HI,
           Go to transaction "SE16N" and enter table "VBUK" and give the delivery number in the field sales document number. Now you type "&SAP_EDIT" in the transaction bar and execute. Here you can change the status(Total goods movement). And see If you can actually bill the document. Kindly please let me know If you need any more information on this.
    Regards,
    Ram Pedarla

  • User status profile in Q-info record not updating on UD

    Hi All,
    My required scenario was, delivery of a material from a vendor must pass through inspection series
    u2022     Model
    u2022     Preliminary  
    u2022     Regular delivery 
    For that,
    1). Maintain different inspection types (with corresponding task list usages) and create inspection plans with these usages.
    2). Maintain the corresponding status profiles for the object type QINF and assigned inspection type to each status in 'SM30 - V_TQ32A'
    3). Assign this status profiles in the quality info records for the relevant materials, vendors combination.
    My problem is while GR against PO, inspection lot for the goods receipt is created automatically and system selects the inspection type as assigned to next status, BUT, When Quality person make a UD to inspection lot, the system NOT sets the next status in the status sequence i.e status not updating on UD. And even when UD is done for the existing lot system not allow for GR of next lot. 
    Kindly let me know where I am wrong.
    Regards,

    Hi,
    The problem is due to missing authorization object :B_USERSTAT".
    Assign this authorization object in your id/role and give necessary values in the fields (activity, authorization key, object category and status profile) and then carry out the transaction again.
    Thanks
    SUMIT.

  • Status profile in Q-info record not updating on UD

    HI All,
    My required scenario was, delivery of a material from a vendor must pass through inspection series
    u2022     Model
    u2022     Preliminary  
    u2022     Regular delivery 
    For that,
    1). Maintain different inspection types (with corresponding task list usages) and create inspection plans with these usages.
    2). Maintain the corresponding status profiles for the object type QINF and assigned inspection type to each status in 'SM30 - V_TQ32A'
    3). Assign this status profiles in the quality info records for the relevant materials, vendors combination.
    My problem is while GR against PO, inspection lot for the goods receipt is created automatically and system selects the inspection type as assigned to next status, BUT, When Quality person make a UD to inspection lot, the system NOT sets the next status in the status sequence i.e status not updating on UD. And even when UD is done for the existing lot system not allow for GR of next lot. 
    Kindly let me know where I am wrong.
    Regards,

    any clue??
    Regards,

  • Item status of SC of subtype ER not updated after creating BDI invitation

    Dear Experts,
    Our process is that we push a PR from ECC that creates a SC of subtype ER in SRM.
    In a Z program we based on some criterion we consolidate the line items of these SCs and create BID invitation for these.
    After BID invitation is created for the SCs what should be the status of these SCs in BBP_PD?
    In our system it is showing
    HEADER          I1021              Created
    HEADER          I1038              Completed
    HEADER          I1106              Shopping Cart Ordered
    HEADER          I1129              Approved
    0000000001    I111                Item in transfer process             X
    For ITEM the status is not updated to I1113 follow on documents created.
    In the Z program we check if the SC Item has status I1113, if yes it means it is already processed for BID else process it for BID now. Since the SC item status is not updated properly same SCs are getting processed again .
    How can we update the ITEM status for a SC of subtype ER after a BID invitation for the SC is created?
    Thanks,
    Anubhav

    Hi Jay,
    Forgot to mention we are on SRM4.0 .
    I solved the issue by calling FM BBP_PD_SC_STATUS_CHANGE_DIRECT(passing item guid and status) and BBP_PDH_DIRECT_UPDATE (passing shopping cart guid) in sequence .
    Now the item level status is updated correctly.
    Thanks a lot,
    Anubhav

  • Status for the transferred Suppliers is not updated in ROS client!

    Hi all,
       We are running on SRM 5.0(Sp6).After i transfer the propects from ROS to EBP and when i convert them to VENDOR in EBP,then the status of the suppliers become "RELEASED" in EBP but the status is not updated in ROS client.
    What is to be done so that once the prospect is saved as a VENDOR in EBP,its status should be updated /set as RELEASED in ROS client too?
      Any help is appreciated...Points will be rewarded.
    BR,
    Disha.

    Deepti / Ramakrishna,
    As per Rama's comments, the BP status is released only when we use SUS and the information is passed via XI. However in our case we have ROS (without SUS) and EBP in same client. In this scenario XI is not required to transfer the Business partner status as per OSS note 1134978.
    So any idea how do we change the status from ACCEPTED to RELEASED?
    Deepti - in one of the thread you did mention about a workaround to update the status? Did you manage to crack it?
    Do you recommend having separate client for ROS, so that system automatically trigger XML message by standard?
    Regards,
    Sandeep Parab

  • Battery Status Indicator (in menu bar) does not update

    I've recently noticed that the battery status indicator in the menu bar gets "stuck," and won't update. I can force it to update by disabling and re-enabling it, or by changing the view style, but if I leave it alone, it won't change, even across sleep/wake cycles.
    Any ideas?

    Actually, the problem disappeared after a reboot. I reboot so infrequently, I didn't even consider that as a solution, but something else caused me to need to reboot, and after that, the indicator works fine.
    Still no idea what caused it to get stuck in the first place, but for now, it's better.
    Good luck!

  • Bad time zone in Syslog Collector Status screen

    Hi, we have a LMS 4.0 and we are watching a wrong time zone in the Syslog Collector Status screen, it says GMT +2 but it should be GMT +1. In the Windows operating system, time settings are well configured; can anyone help me to fix this, please?
    Regards.

    Hi,
    please find attached some screenshots: one with the LMS time, another one with the OS time and the last one with the syslog collector time. The only problem is that they have been taken at different times but it can be seen that OS time zone is UTC + 1 and Syslog Collector time zone is GMT + 2.
    Kind regards.

  • Postfix relay=none, ... status=deferred (Host or domain name not found...

    Hi,
    I actually posted this question 2 weeks ago but under the wrong topic. So, first of all wanted to apologise for double-posting... but since no one replied, I thought I'd try again under the right topic.
    I've been trying to solve this all day today (that was Feb 26th). I used to be able to send emails but for some reason it does not work anymore. At first I thought it was a problem with php (I use entropy pack php 5.2.6) but after searching the topic, I think it is a problem with my network. BTW OS is 10.5.5 and Postfix version 2.4.3
    First of all, after computer restart, I don't think postfix starts automatically
    Running 'sudo postfix start' gives me:
    postfix/postfix-script: starting the Postfix mail system
    Looking at '/var/log/mail.log' I find:
    Feb 27 12:51:04 AMs-MBP postfix/qmgr331: AA70A7A7C77: from=<[email protected]>, size=842, nrcpt=1 (queue active)
    Feb 27 12:52:19 AMs-MBP postfix/smtp456: AA70A7A7C77: to=<[email protected]>, relay=none, delay=3437, delays=3362/0.02/75/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=email.com type=MX: Host not found, try again)
    Running 'sudo postfix check' does not give me any errors
    Checking my '/etc/resolv.conf' it has nameserver 192.168.1.1
    Running 'ifconfig | grep netmask | grep -v 127.0.0.1 | awk {'print $2'}L' gives:
    192.168.1.5
    Checking http://switch.richard5.net/2006/08/19/fatal-open-lock-file-pidmasterpid/ and running 'launchctl list' gives me a long list but no item matches org.postfix.master
    Running 'ps aux|grep postfix' gives
    AM 546 0.3 0.0 599820 468 s000 S+ 1:41pm 0:00.00 grep postfix
    _postfix 331 0.0 0.0 599816 824 ?? S 11:56am 0:00.04 qmgr -l -t fifo -u
    root 329 0.0 0.0 600784 752 ?? Ss 11:56am 0:00.11 /usr/libexec/postfix/master
    _postfix 519 0.0 0.0 599768 752 ?? S 1:36pm 0:00.01 pickup -l -t fifo -u
    Running 'postconf inet_interfaces' at first gave me
    inet_interfaces = localhost
    which I changed to All in '/etc/postfix/main.cf'
    I looked at http://www.postfix-book.com/debugging.html
    Running 'telnet localhost 25' gives me
    Trying ::1...
    telnet: connect to address ::1: Connection refused
    Trying fe80::1...
    telnet: connect to address fe80::1: Connection refused
    Trying 127.0.0.1...
    Connected to localhost.
    Escape character is '^]'.
    220 AMs-MBP.local ESMTP Postfix
    quit
    221 2.0.0 Bye
    Connection closed by foreign host.
    But running 'telnet 10.1.2.233 25' gives me
    Trying 10.1.2.233...
    telnet: connect to address 10.1.2.233: Operation timed out
    telnet: Unable to connect to remote host
    Running 'ping 134.169.9.107' takes a long time. After a while I stop it and get:
    PING 134.169.9.107 (134.169.9.107): 56 data bytes
    ^C
    o
    + 134.169.9.107 ping statistics ---
    28 packets transmitted, 0 packets received, 100% packet loss
    I have not idea what the problem is and/or how to fix it. I know the messages get to the postfix daemon but for some reason they do not continue on their way.
    Please, does anyone have an idea of how to fix this?
    TIA,
    Elle

    Dynamic IP addresses with DynDNS Updater (or equivalent) makes it pretty darned reliable, particularly if you buy DynDNS' Mailhop Forward service, which prevents the likes of roadrunner.com and aol.com from blocking mail coming from your server just because it lives in dynamicIP-land. Way cheaper than paying your ISP extra for a static IPA, too, and totally acceptable for low-volume, residential-based servers for personal not-for-profit use.
    Regarding reliable delivery to a dynIPA server, you are only at risk of non-receipt for perhaps a few minutes immediately following when your ISP rotates your WAN IPA, until DynDNS Updater (or equivalent) updates the DynDNS (or equivalent) servers with your new WAN IPA. But that's really not a problem because I think all, well, okay, most, smtp servers will queue for a redelivery attempt if the initial delivery attempt just happens to occur at that time.
    I wouldn't suggest this practice for high-volume enterprise-class servers or for people trying to run a bootleg mail server business for profit (besides, the ISP would shut it down as an abuse of terms of service, anyways), but for low-volume, residential-based servers for personal use and enjoyment, which I suspect is the case for the O.P., I can't say that I find anything unreliable about my dynamic IP-based mail server.

  • Reg : User status information is not updating in Cube

    Hi Experts,
    I am loading data to INfocube which gets data from sales order ODS and Master data infoobject PROJECT which has project  code. User status is a attribute fo Project (Master data infoobject). 1 WEEK before user staus was changed for a particular Project code in source system ECC system .If i display data in Master data PROJECT ,I could able to see changed user staus for that particular Project code.
    Later data loaded to cube from Master data and ODS.If I select a particular Project code and give a sales document number and try to see user status which got changed ,it is not showing changed User status and values are not showing in Infocube.But when i try for another project code its showing correct User status in INfocube.
    Kindly guide me to solve this issue.
    Thanks in advance!

    ACR for Master data load was happend already and we can able to see changed user status in Master data.
    But we are unable to view user status ,SALES document values for that particular project code. Sales document is extracting from ods.

  • Content file download failed. Reason: HTTP status 404: The requested URL does not exist on the server.

    Hi,
    I am getting this error in most of our WSUS servers.
    Content file download failed.
    Reason: HTTP status 404: The requested URL does not exist on the server.
    Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe 
    Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
     After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
    Log Name:      Application
    Source:        Windows Server Update Services
    Date:          12/19/2014 4:45:55 PM
    Event ID:      10032
    Task Category: 7
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      ******
    Description:
    The server is failing to download some updates.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Windows Server Update Services" />
        <EventID Qualifiers="0">10032</EventID>
        <Level>2</Level>
        <Task>7</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
        <EventRecordID>496887</EventRecordID>
        <Channel>Application</Channel>
        <Computer>*****</Computer>
         <Data>The server is failing to download some updates.</Data>
    This error is happening everyday. Please advise for a fix.

    Reason: HTTP status 404: The requested URL does not exist on the server.
    Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe 
    Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
    Source:        Windows Server Update Services
    Description:
    The server is failing to download some updates.
    This error is happening everyday. Please advise for a fix.
    If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
    If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
    For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
    For a downstream server, figure out what the affected updates are and fix the upstream server.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Migration status at any point of time

    Hello to All,
    I am running a migration scripts (which are actually a procedures) to pick the data from the source table to target
    table.
    My requirement is to find out the migration status at any point of time.Is there any way to do it?
    Please help.
    Best regards,
    Pavan

    Hi Pavan,
    Does your source table have columns to store the status, error message?
    In general, stage tables should have a status and error message column which are updated by the migration script with the status of that particular record.
    You can check these columns to get the status.
    For eg
    select status, error_message, count(*)
    from you_table
    group by status, error_message;The above script will give the number of records Successfully processed, errored during migration.
    Regards
    Imran

  • Failed to verify gateway status. The remote name could not be resolved: 'machinename' Office 365, Power BI

    Hi
    I am trying to setup a Power BI On Premise datasource at a client site. 
    I successfully installed the Data Management Gateway (DataManagementGateway_1.2.5303.1_en-us (64-bit)) software on a Windows Server 2012 box and created the Gateway on the Power BI Office 365 site.
    The Gateway is running correctly with no errors. When trying to setup the Datasource I get an error. As soon as I try to set the credentials the following message appears. 
    Failed to verify gateway 'GatewayName' status. The remote name could not be resolved: 'servername.domainname.net’ 
    The servername which is returned in the error message is exactly the name which the DMG was installed on. 
    There is a firewall in place with a proxy server and I don't know if this might cause the problems. The
    following website suggests adding the proxy settings in the config files of the DMG but this did not solve the problem.
    The above setup process works perfectly when running the DMG from my laptop, connecting to a Gateway and creating a DataSource connecting to SQL Server.
    Any assistance would be appreciated.

    HI
    Thank You for the reply.
    I resolved the issue in the mean time. I was on laptop which does not belong to the domain.
    When setting up the datasource you should be on the same domain as the datasource as per the below post.
    http://sharepoint-community.net/profiles/blogs/connecting-office-365-to-on-premises-data
    Regards, Drickus

  • User status in Q-info record not updating on UD

    Hi All,
    My required scenario was, delivery of a material from a vendor must pass through inspection series
    u2022     Model
    u2022     Preliminary  
    u2022     Regular delivery 
    For that,
    1). Maintain different inspection types (with corresponding task list usages) and create inspection plans with these usages.
    2). Maintain the corresponding status profiles for the object type QINF and assigned inspection type to each status in 'SM30 -    V_TQ32A'
    3). Assign this status profiles in the quality info records for the relevant materials, vendors combination.
    My problem is while GR against PO, inspection lot for the goods receipt is created automatically and system selects the inspection type as assigned to next status, BUT, When Quality person make a UD to inspection lot, the system NOT sets the next status in the status sequence i.e status not updating on UD. And even when UD is done for the existing lot system not allow for GR of next lot. 
    Kindly let me know where I am wrong.
    Regards,

    closed

  • In transaction code BBP_PD the status of the workitem is not updating showi

    Hi Gurus,
    We have implemented N-Step BADI BBP_WFL_APPROV_BADI For Approvals Levels in SRM.
    Work flow is triggering correctly and workitem is sent at all the levels. But in transaction code BBP_PD the status of the workitem is not updating showing the error message "NO WORKITEM FOUND" also status is not updating in BBP_PD.
    Please reply with your suggestions.
    Thanks in advance.
    Madhukar

    Hi
    Thanks for your reply.
    We are getting "No workitem found" status in BBP_PD transaction. But all approval process is happening perfectly and when we check status through "Status Monitor " through web it is updating correct status.
    Status is updating in BBP_PD .Status of main workflow is displaying correctly and approval levels and corresponding approver names are displaying correctly, but only the status and time of approval is missing.
    can you suggest something on this issue.
    Workflow Item:                                                                               
    Workitem-ID        000002009126                                                                               
    Task                      WS90000040                                                                               
    Text                       Shopping Cart Approval N-Step 185522 (BADI)                                                                               
    Status                    STARTED                                                                               
    Statustext              In Process                                                                               
    Date                      09/24/2008                                                                               
    Time                     08:18:09                                                                               
    Node ID            Agent                    User                         State        Workitem       Created at                   
    0040000000      Kotesh APP       APP_KOTESH          No workitem found                                                  
    0040000002                                                                    No workitem found                                                  
    0040000001      shiva APP         APP_SHIVA               No workitem found                                                  
    0040000004                                                                    No workitem found                                                  
    0040000003     shiva APP         APP_SHIVA               No workitem found                                                  
    0040000006                                                                   No workitem found                                                  
    0040000005      SM1                 NNA_FA_SM_1         No workitem found                                                  
    0040000008                                                                   No workitem found                                                                               
    Regards
    Madhu

Maybe you are looking for