Rule created to monitor a single line entries in a text.log file does not work

Hi All,
I have this strange issue. I created a script which generates .log file and i have configured a rule to monitor it. Whenever the .log is altered the alert does not come at all in SCOM 2012 R2.
I want this alert to be raised when one specific line in the center is altered from LISTENING to NOT LISTENING.
I have configured it. It triggered a alert for the first time and again it did not trigger at all.
I created this rule and disabled it and overrided the value to true only to the MS acting as the watcher for this log file.
The log file generates in the local drive of the MS itself.
Changed the log watcher to a different server and also mentioned the application data source to a network location when the watcher was changed so it can pull the log accordingly.
The log is generated in the MS itself. Tried using both local location where the log is located as well as converted the same to a network location still didn't help.
C:\Port_checker is the directory where the .log file is located also there is no other log file present only 1.
I also changed the parameters such as "Contains, Wildcard matches etc but nothing worked.
Screenshots:
2.
The SCOM Action account has Full permissions on all servers over the entire forest itself.
Target used to create this rule is "Windows server operating system"
Can any one help me please.
Gautam.75801

Since you have a script that updates a file line from "LISTENING" to "NOT LISTENING"
you might want to try and configure a Two State Script Unit Monitor rather then a rule. So your script just need to check say every 5 minutes the content of the log file and generate an alert when it matches "Not Listening" and clear when
it changes to "listening".
http://www.systemcentercentral.com/wp-content/uploads/2009/04/HOW-TO_2-state_ScriptMonitor.pdf
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

Hp 6700 option to scan to single file or multiple files does not work-scans to single files only

Cannot find a way to scan multiple documents to a single file. The option on the Scan function does not work!

Hi @apdamw
Have you tried saving the scanned pages as a PDF? When you choose PDF in the format option, you will see the option to choose save all pages to a single file, or create a seperate file for each scanned page. Depending on what option you see, you will need to tick or untick the option.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Line number error in Exception stack trace does not work in J2SDK 1.4

why the line number when your progam fails (in Java 1.3)
don�t shows the line number but in Java 1.4.2:
in a run fail prints something like:
at SomeClass.someMethod()<unknow source>
why: <unknow source>
should I modify the (java or javaw) command arguments to specify that prints the line numbers when has throwns any exception and print the StackTrace ??

Hi,
I have another but related question:
I am using a testing tool, called as Fitnesse. When an exception is thrown, it shows the exception trace but the line numbers are not shown, because the source code is unknown to the tool. It is an open source tool, so I want to change the settings such that it shows the line numbers.
I know, maybe I should ask the question to the tool-forum. But I think, this problem is a general one, not related to a specific tool. How can "java" know the line number of the source code, where an exception is thrown?
Thanks and best regards
Mert Nuhoglu

SAML v2 SP Single Log Out does not work. Please help...

Hi,
I am working to integrate the SAML v2 SP to communicate and exchange data with the IDP. Both IDP and SP are using Sun AM 7.0 with Sun One Web Server 6.1.
On the SP site, I implemented an Assertion consumer custom code to intercept the SAML Assertions from HTTP-POST protocol. This custom code decrypt, verify signature, and parse the SAML Attribute Assertion then redirect attributes data to application. The SSO is working fine between IDP, SP, and application. Here is the summary result I found:
1. IDP initiated SSO - PASSED
2. IDP initiated SLO - PASSED
3. SP initiated SSO - PASSED
4. SP initiated SLO - FAILED
The item 4 failed with the debug log shows "SAML2Utils.getSSOToken: no valid SSO token". I think it failed because the custom code on the SP site might have missed some steps before redirect data to the application.
I am stuck and do not know how to fix this problem. Any hint/help will greatly appreciate.
Thanks very much.
David Truong

Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

Mike wrote:
> Could someone tell me why this prototype-based lightbox
seems to work on one
> of my sites but not on the other?
>
> I literally took the exact same .js & css files,
copied them over from one
> site to the other, but it's only partially working on
the new site.
>
> Works :
>
http://www.roxanacampagiorni.com/
>
> Doesn't work :
>
http://www.vilverset.com/sample.html
>
> Been troubleshooting this one for days, and I'm stumped.
Script wants
> nothing to do with lightboxing HTML files on the new
site. Only straight
> JPGs. But it was written to work with them, and it
*does* work with them
> just fine on the *other* site.
>
> Where is the anomaly between the two sites that's
causing it to break in
> sample.html?
>
>
Not sure if this is relevant but on the page that works you
have these
js files linked - 4.....
<script type="text/javascript"
src="/scripts/jscripts.js"></script>
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
and on the page that doesn't - 3......
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
HTT
chin chin
Sinclair

For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR

Linux logfile monitoring does not work after using "privileged datasource"

Hello!
I have noticed a strange behaviour on one of my Linux Agents (lets call it server_a) regarding logfile monitoring with the "Microsoft.Unix.SCXLog.Datasource" and the "Microsoft.Unix.SCXLog.Privileged.Datasource".
After successfully testing monitoring of /var/log/messages on server_a with the "Privileged Datasource". This test has been on server_a and the MP containing this rule has been delete from the management gorup before the following tests.
I wanted to test another logfile (lets call it logfile_a) using the normal datasource "Microsoft.Unix.SCXLog.Datasource" on server_a. So I created the usual logfile rule (rule_a) in XML (which I have done countless times before) for monitoring
logfile_a. Logfile_a has been created by the "Linux Action Account User" with reading rights for everyone. After importing the Management Pack with the monitoring for logfile_a I had the following warning alert in the scom console managing
server_a:
Fehler beim Überprüfen der Protokolldatei "/home/ActionAccountUser/logfile_a" auf dem Host "server_a" als Benutzer "<SCXUser><UserId>ActionAccountUser</UserId><Elev></Elev></SCXUser>";
An internal error occurred. (the userid has been changed to keep the anonimity of our action account).
To make sure I did not make any mistakes in the XML i have created a new logfile rule (rule_b) monitoring "logfile_b" on "server_a" using the "Logfile Template" under the authoring tab. logfile_b was also created by the "Linux
Action Account User" and had reading rights for everyone. Unfortunately this logfile rule created the same error:
Fehler beim Überprüfen der Protokolldatei "/home/ActionAccountUser/logfile_b" auf dem Host "server_a" als Benutzer "<SCXUser><UserId>ActionAccountUser</UserId><Elev></Elev></SCXUser>";
An internal error occurred. (the userid has been changed to keep the anonimity of our action account).
Although both rules (rule_a and rule_b) used the "Microsoft.Unix.SCXLog.Datasource" which uses the Action Account for monitoring logfiles, the above error looks to me as SCOM wants to use the privileged user, which in this case it not necessary
as the Action Account can read logfile_a and logfile_b without any problems.
So after a few unsuccessfull tries to get both rules to raise an alert I tried to use the "Microsoft.Unix.SCXLog.Privileged.Datasource" for rule_a as last resort. Then suddenly after importing the updated Management Pack I finally received the
alert I desperately waited for this whole time.
Finally after lot of text here are my questions:
Could it be that the initial test with the Privileged Log Datasource somehow screwed up the agent on server_a so it could not monitor logfiles with the standard log datasource? Or may anyone of you might have an idea what went wrong here.
Like I said both logfile could be accessed and changed by the normal Action Account without any problems. So privileged right are not needed. I even restarted the scom agent in case something hanged.
I hope I could make the problm clear to you. If not, don´t hesitate to ask any questions.
Thank you and kind regards,
Patrick

Hello!
After all that text, I fogrot the most essential information..
We are currently using OpsMgr 2012 SP1 UR4, the monitored server (server_a) has agent version 1.4.1-292 installed.
Thanks for the explanation of how the logprovider works. I tried to execute the logfilereader just to see if there are any errors and everything looks fine to me:
ActionAccount @server_a:/opt/microsoft/scx/bin> ./scxlogfilereader -v
Version: 1.4.1-292 (Labeled_Build - 20130923L)
Here are the latest entry in the scx.log file:
* Microsoft System Center Cross Platform Extensions (SCX)
* Build number: 1.4.1-292 Labeled_Build
* Process id: 23186
* Process started: 2014-03-31T08:29:09,136Z
* Log format: <date> <severity>     [<code module>:<process id>:<thread id>] <message>
2014-03-31T08:29:09,138Z Warning    [scx.logfilereader.ReadLogFile:23186:140522274359072] scxlogfilereader - Unexpected exception: Could not find persisted data: Failed to access filesystem item /var/opt/microsoft/scx/lib/state/ActionAccount/LogFileProvider__ActionAccount_shome_sActionAccount_slogfilewithoutsudo.txtEDST02
2014-03-31T08:29:09,138Z Warning    [scx.core.providers.logfileprovider:5209:140101980321536] LogFileProvider InvokeLogFileReader - Exception: Internal Error: Unexpected return code running '/opt/microsoft/scx/bin/scxlogfilereader -p': 4
2014-03-31T08:29:09,138Z Warning    [scx.core.providers.logfileprovider:5209:140101980321536] BaseProvider::InvokeMethod() - Internal Error: Unexpected return code running '/opt/microsoft/scx/bin/scxlogfilereader -p': 4 - [/home/serviceb/ScxCore_URSP1_SUSE_110_x64/source/code/providers/logfile_provider/logfileprovider.cpp:442]
* Microsoft System Center Cross Platform Extensions (SCX)
* Build number: 1.4.1-292 Labeled_Build
* Process id: 23284
* Process started: 2014-03-31T08:30:06,139Z
* Log format: <date> <severity>     [<code module>:<process id>:<thread id>] <message>
2014-03-31T08:30:06,140Z Warning    [scx.logfilereader.ReadLogFile:23284:140016517941024] scxlogfilereader - Unexpected exception: Could not find persisted data: Failed to access filesystem item /var/opt/microsoft/scx/lib/state/ActionAccount/LogFileProvider__ActionAccount_shome_sActionAccount_stest.txtEDST02
2014-03-31T08:30:06,142Z Warning    [scx.core.providers.logfileprovider:5209:140101980321536] LogFileProvider InvokeLogFileReader - Exception: Internal Error: Unexpected return code running '/opt/microsoft/scx/bin/scxlogfilereader -p': 4
2014-03-31T08:30:06,143Z Warning    [scx.core.providers.logfileprovider:5209:140101980321536] BaseProvider::InvokeMethod() - Internal Error: Unexpected return code running '/opt/microsoft/scx/bin/scxlogfilereader -p': 4 - [/home/serviceb/ScxCore_URSP1_SUSE_110_x64/source/code/providers/logfile_provider/logfileprovider.cpp:442]
Strangely I could not acces the "Action Account User" directory under /var/opt/microsoft/scx/log as "ActionAccount" user. Is it ok for the directory to have the following rights: drwx------ 2 1001 users? Instead of "1001" it should say "ActionAccount",
right?
This could be a bit far fetched, but perhaps the logfile provider can´t access logfiles as the "ActionAccount" on this server because it needs to write in the scx.log file. But as the "ActionAccount" can´t access the file, the logfile provider throws
an error. And as "Privileged Account" the rule works flawlessly, as the logfile provider running in root context can access everything.
Don´t know if that makes sense, but right now it sounds logical to me.

Search option for multiple lines in iPad for fixed layout ePub is not working. Is there any alternate way to search multiple lines in ePub?

Search option for multiple lines in iPad for fixed layout ePub is not working. Is there any alternate way to search multiple lines in ePub?

Hi SAP Gurus
I need a big favour, I am trying to map serach string with internal order, my search string is MV-38610573 which I have mapped with posting rule 'GENT' which debits bank account and credit revanue accounts but this revanue account requires assignment with internal order, so I have created another 3 search string with same search string 'MV-38610573' and mapped with BSEG-ASUFNR,60000LC ( internal order),3 (bdc account type) respectively, also maintained three entries in search string use which is for BDC FIELD NAME1, BDC FIELD VALUE 1 & BDC ACCOUNT TYPE 1,
But this is not working it gives me following error,
> Error: (KI 235) Account 4421 requires an assignment to a CO object
Your help will be highly appreciated,

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
Thanks

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time and it does not work in iChat. Why Not ?

Question:-
I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time or other portal and it does not work in iChat. Why Not ?
Answer:-
For a Name to work in iChat it has to be an Valid AIM screen Name.
Only Apple IDs from the @mac.com ending names registered here and the Mobileme (@Me.com ending) names are Valid with the AIM service as well as being Apple IDs
(I am still working on info about registering with iCloud at the moment but if this does give you an @Me.com email it may well be a valid AIM name as well)
NOTES:-
The @mac.com page works by linking an external (Non Apple) email with a @mac.com name.
This External Email cannot be one linked to an Existing Apple ID (you have to use a second email or register at AIM )
The options at AIM are to use your existing email or create new name and link the existing only for Password recovery
MobileMe (@me.com ending names) were valid Emails addresses, Apple IDs AND a Valid AIM Screen Name
@mac.com names look like emails but are only Apple IDs and iChat/AIM Valid Screen Names.
The AIM registration page seems to be pushing you to register [email protected] This is relatively new and I have not followed through the pages to find out if it a valid AIM email (Previously you could register a name without an @whatever.com suffix)
8:16 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Question:-
So I have my current [email protected] email in iChat as I thought as I had linked that to an Apple ID it was a Valid iChat Name. It keeps coming up with a UserName or Password Invalid message. What do I do next ?
Answer:-
Open iChat
Go to the Menu under the iChat name in the Menu Bar and then Preferences and then Accounts in the new window.
Commonly written as iChat > Preferences > Accounts as directions/actions to take.
If it displays with a Yellow running name in the list you have a choice.
Either register it at AIM (I would use a different password to the ISP Login) and then change the password only in iChat (It may take you to confirm any Confirmation email from AIM first) in iChat > Preferences > Accounts
Or you register a new Name at AIM (Or at @mac.com) and enter that (details below)
If you have a Blue Globe name (@mac.com) that will not Login the chances are that it the password that is the issue.
Apple lets you create longer passwords than can be used with the AIM Servers.
Change the Password at iForgot to no more than 16 characters.
Then change the password in iChat as details above.
Adding a new Account/Screen Name in iChat (that is valid with the AIM servers)
Open iChat if not launched.
Go to iChat Menu > Preferences > Accounts
Click the Add ( + ) Button at the bottom of the list.
Choose in the top item drop down either @Mac.com or AIM depending on what you registered
Add the name (with @mac.com the software will add the @mac.com bit)
Add in the password. (If you don't add it now iChat will ask you each time you open it)
Click Done.
The Buddy List should open (New Window)
The Accounts part of the Preferences should now have the new name and you should be looking at the details.
You can add something in the Description line which will then title the Buddy List (Useful when you have two or more names) and make it show up as that in the iChat Menu > Accounts and the Window Menu of iChat when logged in.
You can then highlight any other Account/Screen Name you don't want to use and use the Minus ( - ) Button to delete it.
8:39 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

The Create List Item workflow action does not work in document library with document template

My end goal is more complex but below is a basic example of the issue I’m having that just simply does not work.
I'm trying to use a site workflow to create an item in a document library that has a document template applied to it but the file that gets created by the workflow is corrupt and cannot be opened.
I created a document library and edited the document template by adding some text to the header and changing it to a Word docx file instead of a Word dotx file. I tested the document template by clicking the files tab in the ribbon and then clicking new
document which opens the document template in Word and allows me to edit and save the document back to SharePoint. Then I created a SharePoint 2013 site workflow in SharePoint Designer that contains a single Create List Item action, and that action creates
an item in the document library with the name field statically defined. I published the workflow and then manually start it on the site. The workflow completes successfully and when I navigate to the document library the document has been created by the workflow.
When I click on the document to open it in the Word Web App it throws the error pictured below and if I open it in the Word client application it just opens a blank document and not the correct document template.
I also tried using a SharePoint 2010 workflow with pretty much the same results. Opening the document in Word Web App gives the same error as above and opening the document in the Word client application gives the error pictured below.
Come on Microsoft creating a Word Document in a SharePoint Document Library from a SharePoint Workflow should just work! Is this a bug or does anyone have any ideas on what is causing the this issue?

I had the same problem with corrupted document - this worked for me:
1. Create a 2010 Workflow which creates the list element in a document library
(you may start this workflow from your 2013 workflow if applicable)
2. In the Create New List Item properties - make sure to set ContentTypeId to your content type
("Id for indholdstype" is Danish for "Contenttype ID")
3. Your Content Type template should be a ".docx" file - NOT a ".dotx" file...!
(I have always created my templates for content types as .dotx files - seems Microsoft wants us to use ordinary .docx files as template files for content types)
Hope this helps you!

MDT 0xc0000098 The windows boot configuration data file does not contain a valid OS entry

hello,
i installed WDS+MDT for OS deployment. all was working fine.
Now i need our branch office to be able to deploy OS as well.
I installed a new Win 2008R2 server, and installed the WDS service on it.
When reading about this on the internet i saw i need, on the MDT at our main office, to make a link, under "Advanced Configuration" - "Linked Deployment Shares" to the new WDS server (I used this: http://www.balm.se/?p=115")
when doing so i entered the UNC path to the new server and then, on the created link, i right click and choose "Replicate now".
after doing so, i tried booting a laptop just to see if there is any impact, and now, I'm getting this error:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your windows installation disk and restart your computer
2. choose your language, and then click "Next"
3. Click "Repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000098
Info: The windows Boot Configuration Data file does not contain a valid OS entry.
I know that usually when I'm getting this message, it means that a previous MDT installation was started and did not finished correctly, and the are some [stuff] on the HD, so i do a partition erase and start over and all working fine.
Now it's not working. I tried several computer, even new ones, and NADA.
someone know the cause?
I know I read something, i don't remember where or how to find it, that when doing the steps I did, it alter\change some ini or xml, or something like this. is that true? any one know on what file do i need to look and see if something is misconfigured?
thanks a lot for your help

hello,
i installed WDS+MDT for OS deployment. all was working fine.
Now i need our branch office to be able to deploy OS as well.
I installed a new Win 2008R2 server, and installed the WDS service on it.
When reading about this on the internet i saw i need, on the MDT at our main office, to make a link, under "Advanced Configuration" - "Linked Deployment Shares" to the new WDS server (I used this: http://www.balm.se/?p=115")
when doing so i entered the UNC path to the new server and then, on the created link, i right click and choose "Replicate now".
after doing so, i tried booting a laptop just to see if there is any impact, and now, I'm getting this error:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your windows installation disk and restart your computer
2. choose your language, and then click "Next"
3. Click "Repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000098
Info: The windows Boot Configuration Data file does not contain a valid OS entry.
I know that usually when I'm getting this message, it means that a previous MDT installation was started and did not finished correctly, and the are some [stuff] on the HD, so i do a partition erase and start over and all working fine.
Now it's not working. I tried several computer, even new ones, and NADA.
someone know the cause?
I know I read something, i don't remember where or how to find it, that when doing the steps I did, it alter\change some ini or xml, or something like this. is that true? any one know on what file do i need to look and see if something is misconfigured?
thanks a lot for your help
For a branch solution I would use DFS(R) rather than linked deploymentshares.
If there is infrastructure at the remote sites you could use the MDT environment at your main site, and then at each other site use an existing server or build a new server (VM is available). Create a Deploymentshare on each sever
and copy the contents of the MDT environment from the first site into this share. Next you will have to add the WDS service to each site's server. For WDS add the boot image. Of course as Keith noted ensure that you
have the same versions of MDT and the WAIK/ADK on all systems
You can use DFS to replicate to all of the other sites, but you will still have to create a deploymentshare, and install WDS at each site. So each site talks to its own WDS server you can use the DefaultGateway parameter instead -
[Settings]
Priority=Default, DefaultGateway
[Default]
SkipBDDWelcome=YES
[DefaultGateway]
192.168.10.1=Bergen
192.168.20.1=Oslo
[Bergen]
DeployRoot=\\MDT-Bergen\DeploymentShare$
[Oslo]
DeployRoot=\\MDT-Oslo\DeploymentShare$
If this post is helpful please click "Mark for answer", thanks! Kind regards

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best.

Membership rules does not work with UDF column name having the max length

Found a bug in OIM .
Membership rules does not work with UDF column name having the maximum length
Steps to Reproduce
1.Create a UDF having max column name length for eg UDF_USR_PERSONAL_SUB_DOMAIN_CO (lable = Personal Code)
2. Create a simple Rule like Personal Code = 7000
3. Assign this Rule as a member ship rule of a Group.
4. Create a user with Personal Code = 7000.
5. User doesnot get the group membership.
Thanks
Suren

Yes , i verified logs as well .
If you just decrease the column name length , w/o making change to any other attributes , it starts working ..
Thanks
Suren

Application is fine in prompt line but in the JSW does not work

Hi folks
I have a stuck problem with my application. It works fine with java ... but does not work with the javaws! The problem is in a inner class who extends a panel which must be painted several times (the application works with a optimazation traffic algorithm)... If i use the inner class, the program does not appear and there is no bug messages.
If a cut the lines with the drawingPane code, the application run without a problem with the javaws!
These are the important lines of the code:
// Main class
public class AlgConstrutivos extends JPanel
implements MouseListener, ActionListener{
// The problem PANEL!!!!!!!!!!
private JPanel drawingPane;
// The constructor of main class
public AlgConstrutivos() {
drawingPane = new DrawingPane();
drawingPane.setBackground(Color.white);
drawingPane.addMouseListener(this);
//Put the drawing area in a scroll pane.
JScrollPane scroller = new JScrollPane(drawingPane);
scroller.setPreferredSize(new Dimension(400,400));
//Lay out
add(ordem, BorderLayout.PAGE_START);
add(scroller, BorderLayout.CENTER);
// The main function
public static void main(String[] args) {
JFrame.setDefaultLookAndFeelDecorated(true);
//Create and set up the window.
JFrame frame = new JFrame("Test");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
//Create and set up the content pane.
JComponent newContentPane = new AlgConstrutivos();
newContentPane.setOpaque(true);
frame.setContentPane(newContentPane);
//Display the window.
frame.pack();
frame.setVisible(true);
public class DrawingPane extends JPanel {
public void paintComponent(Graphics g) {
super.paintComponent(g);
// Draw some lines and points...
Any help?
Thanks...
Andre Cordenonsi

Yes... In fact, the inner class is in the same .java file...
There are no error messages at all!
My jnpl file is (i run with --> javaws a.jnpl)
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+"
codebase="file:///c:/animacao/" href="a.jnlp"
>
<information>
<title>ARGH!</title>
<vendor>Myself</vendor>
<homepage href="/animacao" />
<description>...</description>
</information>
<offline-allowed/>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.2+" />
<jar href="Teste.jar"/>
<nativelib href="Teste.jar"/>
</resources>
<application-desc main-class="AlgConstrutivos" />
</jnlp>
I try use the nativelib resource, but nothing happens...
Andre Cordenonsi

Rule created to monitor a single line entries in a text.log file does not work

Similar Messages

Maybe you are looking for