Rules File Not Running in EPMA During Consolidation
Greetings -
I am doing a migration from 11.1.1.2 to our Production environment in 11.1.1.3. We are using EPMA, though I wrote and maintain the rules files in the old editor and import them to the calc manager. I have exported and imported the metadata, recreated the applications, imported the rules file, and recreated security. Everything between the two systems seem to match. The rules file imported without issue and can be extracted from the application, I know it is deploying. When I run a consolidation, the rules file seems to be getting skipped somehow. System translation and consolidation (no special rules for those) run fine, but the consolidation immediately starts at 40% and none of my dynamic or calculated accounts are ever populated. Any help would be greatly appreciated.
Thanks,
Sarah
In Calc Manager, check in the menu bar, look for Deployment View.
Make sure the Sub Calculate is checked and then re-deploy.
Similar Messages
-
Unwise.exe Files not run on Windows 8.1 SSSS
So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
what should i do?
Reply Please!So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
what should i do?
Reply Please! -
Hello, I was looking to install some files from a power pc program. However, I have osx x mavericks. I know the deal, since snow leopard apple swicthed to intel processors. I was wondering since I only need to install files and not install and run a powerpc app ,is there any way I can get the installer open to grab these files that I need? I just need the files, not to run the program, there has to be a way around this without having to run a program like paralells or to run a dual boot with leopard on another drive?
I'm trying to run a music plug in instrument program in Logic and I have everything installed except for the actual sound libraries wich need to be installed off this power pc installer. I went to the companies website and downloaded and installed all of the latest updates. I then ran a report which is telling me that I just need to install the missing library files (on the powere pc installation). Which I find confusing since I thought the whole point of the update i nstall was a way around that? Any help would be appreciated, thanks for your time.
MikeMikeThomasmusic wrote:
...there has to be a way around this without having to run a program like paralells or to run a dual boot with leopard on another drive?
In my experience advising Logic users, depending upon the version of Logic and the model Mac you are using, if your Mac will boot from Snow Leopard, you can install Logic and all of its plug-ins in Snow Leopard and then upgrade to Mavericks. -
SWF files not running from some lab computers
Hello,
Our Flash lab is experiencing strangeness on 8 of its 28 computers. When students create an animation and export it as an SWF file, the animation will not run. They can play the animation from within Flash itself (Enter cmd... watch the timeline progress)... but it just won't run as an SWF file.
SWF files that are created on any of the non-problematic computers will run on the problem computers, but not the other way around (problem computer> good computer).
I'm not familiar enough with Flash to troubleshoot this problem. I know that the entire lab was created from one image and all the computers are the same model Dell, running Creative Suite 4 Premium on XP Pro. It is becoming an issue for students as the lab is full and they are having trouble completing their assignments.
Does anyone have an idea of what's going on... or where to start looking?
Thanks,
AlanThanks for the reply Ned. I've checked and the lab is still at the same version. I did find that if we recreated the student's profile and they started out on one of the "good" computers that any future work on a "bad" computer would work.
I also narrowed it down to a 3D animation... not just any animation that wouldn't work. It seems like the program isn't loading up everything when a student starts Flash for the first time on one of the "bad" computers. Students that first start on a "good" computer can run 3D SWF files successfully on a "bad" computer.
Well, at least recreating the student profiles is a bandaide fix for now. But I'd like to figure out what went wrong with those 8 computers (I did reload CS on a couple of them... didn't help). -
Network UNC paths and SWF files not running.
Flash Player wont run SWF files from a network unc path. A map drive works. How can I resolve this?
Our user profiles in window 7 are roaming and the my documents redirects using a unc path to the my documents area. When the swf file is run, you just get a white background in the player. The standalone player is version 8 . We also deploy the latest flash player plugin for ie9 browser (currently 11.3).
I have tried adding the unc path \\servername\pathname to a .cfg file in C:\Windows\System32\Macromed\FlashPlayerTrust as described in the flash player administrator guide. This did not work.
I have also tried to update the global security settings panel with the unc paths required and copying the settings.sol file to users profiles but this has not made any difference.
Can anyone help?
Many Thanks
MarkThanks for replying Jeromie.
After a bit of digging, I discovered that the problem was with the profile path for users. I am not sure why, but when the profile path contains the fully qualified domain name in it , flash player fails i.e \\server.domain.co.uk\sharename\flash.swf. when the path was changed to \\servername\sharename\file.swf , it worked.
I changed all the users profile paths and removed their appdata to and now all users can play flash files with the new profile path.
Regards
Mark -
.ipa file not running on iphone
Hi,
Apps created by using Flash CS5.5 executed on apple device successfully.
But nw I want to execute any .swf app on iphone/ipad from command prompt.
So, I downloaded simple helloWorld.swf file from http://www.mediafire.com/?bf2f9uii1h1xksb
& using "adt" command I created it's .ipa file.
Bt the problem is that it is not running in my iphone means app icon come there bt launched with white blank screen..
What may be the problem?
Thanks,
SampadaAlthough you called it a simple hello world swf, it's not simple. It does show "hello world", but the code it is running involves an RSL Preloader, and it's accessing external URLs. Specifically it downloads a Flex framework file. That isn't something that you'll get away with when making iOS apps.
-
My name is Pradipto.I make one JAR file which contains some third
party classes.Actually i am using jdom classes for parsing xml.As i am running jar file it is showing error that jdom classes not found.
I set classpath for jdom classes also included jdom jar/class files to jdk classpath but still it is not running.Pl help me and tell me where to set classpath for jdom?
ThanxHi all,
I am sorry that the reply I posted here was supposed to be send to http://forums.java.sun.com/thread.jsp?forum=31&thread=294049 - a million appologies!
Putting the required jar files within JRE installations (installed extensions) will require you to make these changes to all machines you are going to run your application - in some cases this might not be a feasible solution. Instead you can bundle the required jars along with your application (after verifying that its permissible to do so), and refer these jar files in the manifest of the executable jar file you are creating.
See http://java.sun.com/docs/books/tutorial/ext/index.html to know about extension mechanism and http://java.sun.com/docs/books/tutorial/jar/index.html to know about JAR files.
Launching an executable JAR file might not work on some platforms and also on the type of JRE installation you did. If everything else fails, try a JRE reinstall! :)
HTH,
Binil -
Applescript run from Mail rule does not run
I am attempting to run an Applescript from a Mail rule. Basically, the Applescript does not run.
Stripped to the bare essentials, the following script runs fine when Applying a rule in Mail:
say "Hello"
as well as this one:
say "Hello"
using terms from application "Mail"
on perform mail action with messages theMessages for rule theRule
tell application "Mail"
-- statements to process each message in theMessages
end tell
end perform mail action with messages
end using terms from
But, when I remove the comments from the block lifted verbatim from the Applescript manual:
say "Hello"
using terms from application "Mail"
on perform mail action with messages theMessages for rule theRule
tell application "Mail"
-- statements to process each message in theMessages
end tell
end perform mail action with messages
end using terms from
the script does not even say Hello.
I am trying to go as far as having the Applescript create a new ToDo based on specific incoming emails, but I can't get any but the simplest Applescript to run.
Can anyone help me?
TomThe script works just fine - at least, as designed if not as expected.
When the script runs, Mail and/or AppleScript looks for a perform mail action handler. If that is found, the commands within are executed.
If there is no perform mail action handler then the script is run as-is (i.e. as if you clicked 'Run' in AppleScript Editor).
And that's exactly what's happening here. In the first case (that works) the script is running because there's no (visible) perform mail action handler.
In the second case where it apparently doesn't work, there is a handler, so that handler is being executed. Any code outside that handler is ignored (unless it's called from within the perform mail action handler.
Since your 'say' command is outside the handler, it is ignored. However, if you move it inside the perform mail action handler you'll hear your speech. -
Servlet File Not running on Server
Hi All,
I have a servlet file named "TestServlet", when I run this file(http://mydomain.com/TestServlet) on server it won't run, but its running on my local machine. Am using Tomcat 5.5.9 and jdk1.5.0_05 and Server configuration also same as my local machine configuration. Please! let me know any suggestion that why its not running on server machine.
*1. web.xml is:*
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>My Servlet</display-name>
<description>
My Test Servlet
</description>
<servlet>
<servlet-name>TestServlet</servlet-name>
<servlet-class>com.test.TestServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>TestServlet</servlet-name>
<url-pattern>/TestServlet</url-pattern>
</servlet-mapping>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>
</web-app>*2. TestServlet.java file is:*
package com.test;
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.*;
import javax.servlet.http.*;
public class TestServlet extends HttpServlet
public void doPost (HttpServletRequest req, HttpServletResponse response)throws ServletException, IOException
* Set the content type(MIME Type) of the response.
response.setContentType("text/html");
PrintWriter out = response.getWriter();
* Write the HTML to the response
out.println("<html>");
out.println("<head>");
out.println("<title> A very simple servlet example</title>");
out.println("</head>");
out.println("<body>");
out.println("<h1>Welcome To TestServlet</h1>");
out.println("</body>");
out.println("</html>");
out.close();
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws IOException, ServletException
doPost(request, response);
}Thanks in Advance,
Prasath Arjunan.PrasathArjunan wrote:
Yes, I can run my JSPs on my server without any error,
I don't know which port it has listening in my Server(Tomcat),
My server also have installed Apache HTTP server and my application is under ROOT directory only.If you don't know then it is most likely the default 8080 port.
I ask because in your url example you do not provide a port number, so requests are going to port 80. If you have Apache HTTP running there then you must have a connector installed in Apache HTTP that forwards requests to Tomcat? Because then I'd say the mappings are not entirely correct and servlet requests do not reach Tomcat. Post the connector configuration if you are using one. -
M3g files not running on motorola devices
I have developed one game using jsr184 but the game dosnt work on motorola devices. the problem is m3g file used . same code is running ok on default emulators on suns wtk2.3 beta version. can u please help me to get this problem out.
Publish as what? FLV, HTML, MP4?
What server? I would assume a Connect server, but I figure let's be sure. If Connect, what version?
When you say "not running properly", what is happening? -
Hello
My problem is the desktop software will not run. According to documentation, it is os 3.5 on hand held and 4.1.4 is right for my computer OS (98). I can hotsync most but not all of the applications (notably: recent memo entries won't) with the Home software button but not the hardware button. I have done a soft reset and just downloaded the palm desktop software and loaded it today.
Post relates to: Palm VxOh, sorry I neglected to review your original post regarding the OS.
Try using the following directions to see if you can "clean" uninstall Palm desktop. They are for XP but most of the instructions should work on 98. Once you uninstall, sync with the conduits set at handheld overwrites desktop.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to C:\Program Files\Palm or
Palm One. Highlight your Palm Desktop username and right click and copy.
Then go to your PC desktop, right click on a blank spot and select paste.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer. Like the above folder, delete the Palm folder. Once this is done, you will need to delete some registry keys
from your PC Operating System registry.
Word of warning, going here and deleting the wrong thing can cause your PC
to not start up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This will show them everything
they need to delete. To retain your current Registry settings, we need to do a backup of the Registry.
On the PC, go to start and run type "regedit" without quotes
Highlight MY COMPUTER, go to File --> export. Should pop up with a Save As
box. Current location is fine should be in My Documents or you can change to a location you will remember. In the file name box, type "Regbackup[todaysdate]" i.e. Regbackup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are
you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer
Then reinstall your Palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before you create a hotsync name.
Post relates to: Palm i705 -
Published files not running on server
I am using captivate 7.0.1.237. When I publish the project and see it's output. The project runs properly. But, when I run the same project on server the project is not running properly. Any ideas?
Publish as what? FLV, HTML, MP4?
What server? I would assume a Connect server, but I figure let's be sure. If Connect, what version?
When you say "not running properly", what is happening? -
File not found and exception during commit of transaction
Hi All,<p></p>
We are using weblogic 8.1 sp5 and oracle 9.2. In a business process (jpd), I am getting this message and exception immediately after publishing a request document(xml) to a channel and goes to the next process node and the process aborts. Any thoughts are appreciated. Please let me know soon.
<p></p>
Thanks in advance!<p></p>
Prashant
<p></P>
<u>Message:</u>
Could not find a file for class oracle.jdbc.driver.T4CXAConnection
<p></P>
If I hit continue while debugging then I get this <u>exception:</u><p></P>
<Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-0049BFC11227BCBD651D(24359063),Status=Rolled back. [Reason=javax.ejb.EJBException: Exception on insert: java.lang.RuntimeException: Unable to serialize invocable],numRepliesOwedMe=0,numR
epliesOwedOthers=0,seconds since begin=645,seconds left=60,XAServerResourceInfo[JMS_cgJMSStore]=(ServerResourceInfo[JMS_cgJMSStore]=(state=rolledback,assigned=qbAdmin),xar=JMS_cgJMSStore,re-Registered = false),XAServerResourceInfo[cgPool]=(ServerResourceInfo[cgPool]=(state=rolledback,assigned=qbAdmi
n),xar=cgPool,re-Registered = false),SCInfo[qbDomain+qbAdmin]=(state=rolledback),SCInfo[current+qprocwlp1]=(state=rolledback),properties=({}),local properties=({modifiedListeners=[weblogic.ejb20.internal.TxManager$TxListener@397bfb], weblogic.jdbc.jta.cgPool=weblogic.jdbc.wrapper.TxInfo@4eb65b}),Own
erTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=qbAdmin+10.1.130.38:7003+qbDomain+t3+, XAResources={JMS_FileStore, JMS_QProcureFileStore, cgPool, JMS_cgJMSStore, bpmArchPool},NonXAResources={})],CoordinatorURL=qbAdmin+10.1.130.38:7003+qbDomain+t3+): javax.ejb.EJBException:
Exception on insert: java.lang.RuntimeException: Unable to serialize invocable at com.bea.wlw.runtime.core.bean.BMPContainerBean.ejbStore(BMPContainerBean.java:1837) at com.bea.wli.bpm.runtime.ProcessContainerBean.ejbStore(ProcessContainerBean.java:193) at com.bea.wli.bpm.runtime.ProcessContainerBean.ejbStore(ProcessContainerBean.java:171) at com.bea.wlwgen.PersistentContainer_bajz39_Impl.ejbStore(PersistentContainer_bajz39_Impl.java:149)at weblogic.ejb20.manager.ExclusiveEntityManager.beforeCompletion(ExclusiveEntityManager.java:593) at weblogic.ejb20.internal.TxManager$TxListener.beforeCompletion(TxManager.java:737) at weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:1026) at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:116) at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:1202) at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:1974) at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:257) at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:228) at weblogic.ejb20.internal.MDListener.execute(MDListener.java:430) at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:333) at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:298) at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2686) at weblogic.jms.client.JMSSession.execute(JMSSession.java:2598) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
Caused by: java.lang.Exception: Exception on insert: java.lang.RuntimeException: Unable to serialize invocable
at .bea.wlw.runtime.core.bean.BMPContainerBean.doInsert(BMPContainerBean.java:1909) at com.bea.wlw.runtime.core.bean.BMPContainerBean.ejbStore(BMPContainerBean.java:1817)... 18 more
Caused by: java.lang.RuntimeException: Unable to serialize invocable at com.bea.wlw.runtime.core.container.Invocable.toByteArray(Invocable.java:812) at com.bea.wlw.runtime.core.bean.BMPContainerBean.doInsert(BMPContainerBean.java:1859)... 19 more
Caused by: java.io.NotSerializableException: java.util.AbstractList$ListItr at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1054)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1332)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1304)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1332)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1304)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
at com.bea.wlw.runtime.core.container.Invocable.toByteArray(Invocable.java:803)
... 20 more
--------------- nested within: ------------------
weblogic.transaction.RollbackException: Unexpected exception in beforeCompletion: sync=weblogic.ejb20.internal.TxManager$TxListener@397bfb
Exception on insert: java.lang.RuntimeException: Unable to serialize invocable - with nested exception:
[javax.ejb.EJBException: Exception on insert: java.lang.RuntimeException: Unable to serialize invocable] at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1684) at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:311) at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:228) at weblogic.ejb20.internal.MDListener.execute(MDListener.java:430) at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:333)One possible cause of this issue is that your JPD may have some non-transient field(s) which is/are not Serializable. Check for the warnings in the Workshop, that may point you to such fields.
~Balwinder -
Flash file not running on preview
But it will run when I click the play button in
Dreamweaver... But the site will not load or run the swf
file....PS... the same file runs from a hosted server, but not when
the files are loaded on local machine.... -
Excel rule files not opening in OPA 10.2
Hi ,
I have been using OPA 10.2 , on a windows 7 system , any of the excel files in my OPA project are not opening. They give an error message - "An error occurred while opening the document abc.xls. Unable to set the installed property of the AddIn class."
I un-installed and re-installed OPA as well as Office 2007 Enterprise Edition , but the error still exists. I also tried running OPA with - "Run as administrator" option , but the problem persists.
Can anybody please help in this regard.
Thanks,
KavyashreeTake a look at the Installation Guide for Oracle Policy Modeling 10.3.1. There is a topic at the bottom that has some steps that might be relevant for your situation. For convenience I've copied some of the details:
The following is a possible workaround that will enable you to manually activate the Oracle Policy
Modeling AddIn for Excel:
1) Open the Excel document outside Oracle Policy Modeling.
2) Select Excel Options from the Office Menu (circle at top left). Select Add-Ins, then find
Manage: Excel Add-Ins, and click on Go...
3) Place a tick in the Oracle Policy Modeling Excel 2007 check box (if it is already ticked, try unticking,
clicking OK, and ticking it again).
4) Click on the OK button.
5) Try opening the workbook again in Oracle Policy Modeling.
If the Oracle Policy Modeling AddIn for Excel does not appear in step 3, you should be able to locate
it in the templates directory of the Oracle Policy Modeling installation. The default location is:
C:\Program Files\Oracle\Policy Modeling\templates\Oracle Policy Modeling Excel 2007.xlam
Maybe you are looking for
-
I have tried everything that I know to uninstall the new version of Firefox. I also installed Aurora beta and it had the same behavior and I was able to uninstall that. I cannot open a ff browser to work on it using much of your support information.
-
Can't play VDO tutorials of Apple's web sites
I'm using Mac mini with Mac OS X 10.7.1 in school's proxy server. The port of proxy is 8080. My problem is my mac can not play VDO tutorials of Apple's web sites,http://www.apple.com/iwork/tutorials/#pages-hero (and other VDO of Apple). Every attempt
-
Custom Commit operations in different pages
Hi, I am trying to implement custom DBTransactionImpl class by following the below link - http://www.oracle.com/technology/products/jdev/tips/muench/dbtransimpl/index.html I achieved the required functionality while working with single Application mo
-
How to display data in multiple lines in a OAF page
Dear All, I have search field and the data is coming like this: Mobile Phone Number(s) 0044 7843 271222, 0044 6664 2222 I have to show data like Mobile Phone Number(s) 0044 7843 271222 0044 6664 2222. Please let me know which item type i sh
-
I think I may have Phantum Cursor! Help!
So, its going to be hard for me to write this because the cursor keeps flipping from pages, clicking randomly on stuff, zooming in and out which it is making it difficult to write! Is this phantum cursor? And how do I fix this? I can't even get to my