Run Agent on Another ODI and consumming my Projects

Hi everyone!
My question is ..
I have an instalation of Oracla Data Integrator, i have my connections, models, packages and all that i need for work but i need an agent that live in another instalation of Oracle Data Integrator, because the problem of license, on my instalation i cant use an agent and i want to use the other agent that live on the another instalation.
I try many options but i cant, on of them is, create the same connections on the topology, create the same models and y dont create more of those things 'cause it means build all projects.
Thank for your repplies.
If need more explain of this, asking me

Hi Ace,
As the listener agent doesn't connect to the repository, you could use the same physical instalation thru several master BUT the same isn't true to a scheduling agent once it connects to the master and work repository to get the schedulled process.
What is the type of agent from your environment?
Cezar Santos
http://odiexperts.com

Similar Messages

  • Can we call an ODI package from another ODI package within same Project?

    hi All,
    Can we call an ODI package from another ODI package within same Project?

    What you can do is get all the interfaces on the old package that you want to be included in the new package. This way, the new package will have the exact code from the old package.Or generate a scenario out of your ("old") package and drag&drop the scenario in the "new" package.
    That seems easier to me, because you can re-use the scenario as often as you want.
    But you have to take care: If you change your original ("old") package, you have to regenerate the scenario, otherwise the changes do not affect the scenario.
    Edited by: h_elmu_t on 02.07.2009 08:50

  • Firefox exe continues to run after closing all windows, and consumes massive amounts of cpu

    after closing all firefox windows and trying to reopen i get the "firefox is still running but unresponsive" message, and have to go into task manager, processes and end the firefox exe, which is consuming between 96 and 100 cpu.

    Norton IPS is apparently a known issue being mentioned in the KB articles:
    *[[firefox will not start]]
    * [[firefox crashes when you open it]]
    * I also found an earlier post on the Norton site http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-IPS-1-0-Addon-for-FireFox/m-p/25425#M8494 but I am not sure this is still considered a problem.
    What exactly is this IPS extension. I am currently using XPs with Norton's NIS (version 18.6 - it is a paid for subscription). I do have Intrusion Prevention active in NIS but I see no specific extension or program IPS. Is this some optional additional software?
    I did find an explanation but from 2009
    * http://community.norton.com/t5/Norton-Protection-Blog/Intrusion-Prevention-System-IPS-Your-first-line-of-defense/ba-p/124400
    I am NOT using the Norton Toolbar etc. is it these components that are causing the problem i.e safe search etc.
    I am not having problems with firefox hanging or continuing, despite using NIS.
    There is a bug on this https://bugzilla.mozilla.org/show_bug.cgi?id=548945 but that does not seem to have got very far in confirming or resolving the issue. I imagine Norton have a very large userbase and it seems unlikely that the basic NIS is itself incompatible with Firefox.

  • How can you find out if another VI running on the same computer and how can you find out the name of that VI?

    Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
    If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone? 

    I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them.  I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
    I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory.  I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods.  [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
    I think you could adopt this idea to do what you need.
    BS

  • Running Leopard on one partition and Tiger on another partition?

    I have recently purchased a family pack of Leopard, and I am reading up on a lot of the posts, here, before I venture the installation on two machines. I intend to install Leopard one machine at a time and give a few weeks between installations.
    One machine is a 20" 2.0 Ghz Intel - IMAC Aluminum (August 2007), and the other is a G4 Powerbook 17" 1.67ghz 250GB HD. I will probably install on the IMAC first.
    My question concerns the G4 Powerbook 17." I have just purchased a 250gb internal hard drive; however, it has not arrived yet. From time to time, I want to be able to run a few programs in classic....., and to have that available to me in the rare event that I want to look at files formatted for classic programs. Call me old fashion or unable to let go of the past... .in any event, I have some files that may be difficult to convert or some software that I do not want to purchase in OS X because I use those programs so rarely.
    Initially, I considered just having an external fire wire drive with Tiger installed on it in which I could boot classic up on the rare occasion.
    My new idea has been to partition the internal drive to have 10 gb or so available for Tiger. Has anyone successfully run Leopard on one partition and Tiger on the other partition or do they potentially cause problems for one another? Any suggestions, recommendations or concerns are welcomed.

    Works like a champ. I run Panther, Tiger, Leopard, and OS 9 on the G4 w/o problems.
    Get a bootable, external HD, partition it into enough volumes to accommodate each machine, and make bootable backups/clones of each machine before upgrading/updating and ensure that each boots that machine and works like the original. That allows you to revert to the previous good state without having to reinstall anything. See these for details:
    http://docs.info.apple.com/article.html?artnum=106941
    http://www.macmaps.com/upgradefaq.html
    http://www.macmaps.com/backup.html
    http://www.thexlab.com/faqs/installswupdates.html
    http://www.thexlab.com/faqs/backuprecovery.html
    Once that's finished, review these for upgrading options:
    http://discussions.apple.com/thread.jspa?messageID=5757385
    http://discussions.apple.com/thread.jspa?messageID=5666369
    http://discussions.apple.com/thread.jspa?messageID=5646414

  • Is it possible to create an invoive that keeps a running total in one column and in another column keep total of monies spent from a starting amount of funding?

    Is it possible to create an invoive that keeps a running total in one column and in another column keep total of monies spent from a starting amount of funding?

    Hi Sara,
    Many thanks for your reply.  We just brought Adobe Acrobat XI Pro complete
    with Adobe Forms Central, My manager asked whether I could use the forms
    part to create a summary tracking sheet for all of our contracts.
    Having looked at it I could see how to create a table that in the first
    column deleted costs from a starting fund, and in the last keeps a running
    total of all monies spent.
    I agree, Excel does seem to be much better suited to the task.  I was try
    trying to comply with her request
    Regards,

  • Users moved out of POWL but still it is running and consume memory.

    We are on SRM6.0 and we have issues with POWL session close. Some users runs POWL w/o any selection which inturns run the POWL forever. While users logoff from the system but still the POWL is running in system and consume lots of memory in system. I am looking the ways to kills the session automatically once the users logoff or close the portal. Do let me know if you have any inputs.
    Thanks, Sachin

    Hi Sachin
    SAP Note 1134640 - SRM 6.0 / 7.0 POWL: no refresh when
    clicking on query name
    SAP Note 1134761 - SRM 6.0 / 7.0 POWL: Display 'Query has
    been changed'
    SAP Note 1410793 - SRM Shopping Carts (SC) header POWL
    query-- OPEN THIS FILE SC_header_POWL_query.pdf FOR MORE INFO SC_header_POWL_query.pdf given by richardo cavendi for us..
    regarding your BBP_DOCUMENT_tab- invoice entry - leave as it is . it may harm your business object. you can delete it after some 2 years. Even SAP dont recommend to delete. some accident happen during that time. SRM system is very robust in this matter. CLean job verifies the docuemnt .if any changes happened by the enduser before running the clean job. it makes the entry. Indeed it is not SAP problem. whenever enduser /procurement department made mistake , this entries are sticked permanently. This is my opinion.
    regarding your  new UOM query
    SMOF_DOWNLOAD report helps to transfer ..
    whenever you change any  UOM  on Material master and immediately updates in SRM by CRM*table settings.
    Muthu

  • How can I decrease my font size in mail?  I have it set to small and yet it is enormous, letters running into one another.  I have rebooted and more.  Something is over riding my setting.  Any suggestions?

    How can I decrease my font size in mail?  I have it set to small and yet it is enormous, letters running into one another.  I have rebooted and more.  Something is over riding my setting.  Any suggestions?

    You haven't mentioned which mail it is,
    If it is G-mail go to settings --> general tab--> default text style , you can change your font size & then save at the bottom of the page

  • Question re: JDS/gnome/X and running smc as another user

    Running Solaris 10 on Sun VirtualBox, have one user account in 'Staff' where I want to administer some aspects of my system for the time being as part of best practice for administration. I login to my user account, open a terminal, su - root and then run smc&. I get an error in the terminal window about DISPLAY environtment variable not being set. echo $DISPLAY reveals that it is null, so I export DISPLAY=hostname:0 and then try to run again and I still get the message. I am able to execute smc& from the shell prompt if I am logged into the root session. The only change I have made to the system operations at this point was to move /export/home to a different disk/slice and that mounts fine so and should not have caused an error anyway. If I execute xauth as root and list I get something like this:
    hostname:0 {encryption type} {RANDOM}
    hostname/unix:0 {encryption standard} {RANDOM}This is to say it would appear to be that this is set correctly. [This example|http://docsun.cites.uiuc.edu/sun_docs/C/solaris_9/SUNWabe/ADVOSUG/p33.html#NETWORKAPP-88347] leads me to believe that a null DISPLAY should still allow programs to process by the Xserver/gnome .
    My question then is:
    - How can I run smc from another users session or must I log into a session as root?
    - If DISPLAY is incorrectly set, how can I configure my system to create accounts with the correct settings?
    I should note that *xhost +*, while it disables the access control, has no affect on the outcome of executing smc&.

    Running Solaris 10 on Sun VirtualBox, have one user account in 'Staff' where I want to administer some aspects of my system for the time being as part of best practice for administration. I login to my user account, open a terminal, su - root and then run smc&. I get an error in the terminal window about DISPLAY environtment variable not being set. echo $DISPLAY reveals that it is null, so I export DISPLAY=hostname:0 and then try to run again and I still get the message. I am able to execute smc& from the shell prompt if I am logged into the root session. The only change I have made to the system operations at this point was to move /export/home to a different disk/slice and that mounts fine so and should not have caused an error anyway. If I execute xauth as root and list I get something like this:
    hostname:0 {encryption type} {RANDOM}
    hostname/unix:0 {encryption standard} {RANDOM}This is to say it would appear to be that this is set correctly. [This example|http://docsun.cites.uiuc.edu/sun_docs/C/solaris_9/SUNWabe/ADVOSUG/p33.html#NETWORKAPP-88347] leads me to believe that a null DISPLAY should still allow programs to process by the Xserver/gnome .
    My question then is:
    - How can I run smc from another users session or must I log into a session as root?
    - If DISPLAY is incorrectly set, how can I configure my system to create accounts with the correct settings?
    I should note that *xhost +*, while it disables the access control, has no affect on the outcome of executing smc&.

  • Barcode shows a bunch of squares when barcode is made on AI CS11. Does anyone know a fix for this? We have CS2 running on another PC and we don't get this problem.

    Barcode shows a bunch of squares when barcode is made on AI CS11. Does anyone know a fix for this? We have CS2 running on another PC and we don't get this problem.
    Background:
      Using FrameMaker 7.1 to create a PDF file where a CS11 barcode file is embedded. PDF generates fine but we get a bunch of squares when we copy and paste the barcode data into Notepad.
      We have CS 2 running on another PC and we don't get this problem. Do I need to install a plugin (if any) for CS11 to get this to work?
    Thanks!

    Thanks for your feedback.  I was not able to mention earlier that in my line of work, we use Notepad to check if the barcode text is written correctly or if the corresponding text can be found if searched in the PDF... We use FREE3OF9.TTF font when entering text values for the barcode (usually in document/part number format exclusive for our company's use) in AI CS11. After saving the AI file, we attach it in a document using FrameMaker 7.1, then a PDF file is created. The output PDF will be a certification sheet for our products. They (our clients) should be able to scan the document/part number out of the barcode. I'm sorry, I could not divulge any other information so I am not sure if this clears out the issue. It used to work before but I had to get my PC formatted and since then I have been encountering this problem. I am trying to figure out if we missed to install a component or something got messed up after re-installing Adobe Illustrator CS11.

  • I have my AIR plugged into another monitor and after it goes to sleep sometimes it sounds like the system is running and it will not come back up..  I have to restart it.   What is this..  Please help

    I have a macbook air and i have it hooked to another monitor and I love it but lately it has after it goes to sleep for a while it sounds like it is trying to run the drive or fan really hard and when I try to bring it alive it does not come back to life so I have to hard boot it and then restart it.   What is this...

    Go into Sys. Pref , and power settings and UNcheck "put hard disks to sleep" on both power tab and battery tab.
    When on projector use with your Air and a presentation, dont close the monitor or sleep your Air.
    Verify any coincident applications running that can/could conflict with projector / sleep occurrence by running Etrecheck:
    report back on same
    http://www.etresoft.com/etrecheck
    EtreCheck is a simple little app to display the important details of your system configuration and allow you to copy that information to the Clipboard. It is meant to be used with Apple Support Communities to help people help you with your Mac. EtreCheck automatically removes any personally identifiable information from the output.

  • Running OS command in ODI

    Hi all,
    We are migrating from Informatica's DIM to ODI. In DIM, we can run the OS command as shown below.
    if [ -f /tmp/test.txt ]; then
    rm /tmp/test.txt
    fi
    However, in ODI, we try to use OS Command and put it the above codes. It just doesn't work. We know we can put in the code in a shell script file and call it from ODI. But, we just don't want to put everything to shell scripts. Please kindly help. We are running ODI 11g in Unix.
    Regards,
    nww
    ODI-1226: Step OS Command 1 fails after 1 attempt(s).
    ODI-1242: Operating system command execution fails.
    Caused By: java.io.IOException: Cannot run program "if": error=2, A file or directory in the path name does not exist.
         at java.lang.ProcessBuilder.start(ProcessBuilder.java:460)
         at java.lang.Runtime.exec(Runtime.java:605)
         at java.lang.Runtime.exec(Runtime.java:443)
         at java.lang.Runtime.exec(Runtime.java:340)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.launchProcess(SnpSessTaskSql.java:3116)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execOsOrders(SnpSessTaskSql.java:1539)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execOsOrders(SnpSessTaskSql.java:1503)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2770)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
         at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
         at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
         at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
         at java.lang.Thread.run(Thread.java:736)
    Caused by: java.io.IOException: error=2, A file or directory in the path name does not exist.
         at java.lang.UNIXProcess.<init>(UNIXProcess.java:53)
         at java.lang.ProcessImpl.start(ProcessImpl.java:101)
         at java.lang.ProcessBuilder.start(ProcessBuilder.java:453)
         ... 19 more

    Hi,
    I believe, OS command cannot handle all these commands. If you are thinking that anybody can delete the script file and odi will fail to execute then it will be better you create the shellscript file by odi and run it by odi and delete it by odi as well. You can use OdiOutFile here.
    Thanks.

  • ODI and Essbase in different server to read the file error

    Hi,
    I have ODI and Essbase installed in different server.
    I have created an interface to execute a calc script on top of an essbase cube. I kept the Caclscript.csc file in one folder in ODI server and provide the path
    EXTRACTION_QUERY_FILE parameter is the path of the .csc file i placed in ODI server. it executed successfully to generate the extract file using the calc script in the specified path on Essbase server.
    Now i want to read that file and load it to a relational table so map the network drive from ODI server to Essbase server where the file has been generated and provided the EXTRACT_DATA_FILE_IN_CALC_SCRIPT parameter as the Network drive path but ODI is unable to read the file.
    any other option to read the file reside in essbase server and load it to relational table.
    com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Error occured while reading the data file produced by calculation script.
    -KP

    I would install an ODIAgent on the Essabse server and use this agent when running this particular operation

  • How to run java from another directory

    hi,
    i have a Sample.java file in F drive(f:/Sample.java). I opened command prompt in windows and went to c: drive and try to compile as
    C:\>javac f:/Sample.java
    above command works well. it generated Sample.class file in F:/Sample.
    But, when i try to Run that file, i got the error as follow.
    C:\>java f:/Sample
    Exception in thread "main" java.lang.NoClassDefFoundError: f:/Sample
    Caused by: java.lang.ClassNotFoundException: f:.Sample
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    Could not find the main class: f:/Sample. Program will exit.
    Please guide me to run java file from another directory

    Thanks a lot. I appreciate your answer
    But, when i try to run the java program.. below message has been displayed, showing how to use the command with options....
    I didn't get the result of java program.
    c:\>java f:\Sample.java
    C:\>java -cp f:\Sample
    Usage: java [-options] class [args...]
    (to execute a class)
    or java [-options] -jar jarfile [args...]
    (to execute a jar file)
    where options include:
    -client to select the "client" VM
    -server to select the "server" VM
    -hotspot is a synonym for the "client" VM [deprecated]
    The default VM is client.
    -cp <class search path of directories and zip/jar files>
    -classpath <class search path of directories and zip/jar files>
    A ; separated list of directories, JAR archives,
    and ZIP archives to search for class files.
    -D<name>=<value>
    set a system property
    -verbose[:class|gc|jni]
    enable verbose output
    -version print product version and exit
    -version:<value>
    require the specified version to run
    -showversion print product version and continue
    -jre-restrict-search | -jre-no-restrict-search
    include/exclude user private JREs in the version search
    -? -help print this help message
    -X print help on non-standard options
    -ea[:<packagename>...|:<classname>]
    -enableassertions[:<packagename>...|:<classname>]
    enable assertions
    -da[:<packagename>...|:<classname>]
    -disableassertions[:<packagename>...|:<classname>]
    disable assertions
    -esa | -enablesystemassertions
    enable system assertions
    -dsa | -disablesystemassertions
    disable system assertions
    -agentlib:<libname>[=<options>]
    load native agent library <libname>, e.g. -agentlib:hprof
    see also, -agentlib:jdwp=help and -agentlib:hprof=help
    -agentpath:<pathname>[=<options>]
    load native agent library by full pathname
    -javaagent:<jarpath>[=<options>]
    load Java programming language agent, see java.lang.instrument
    -splash:<imagepath>
    show splash screen with specified image
    C:\>

  • Oracle.odi.runtime.agent.invocation.InvocationException: ODI-1221: Unable to restart session 5002: session is not found in work repository WORKREP1

    Hi,
    I ran a scenario in ODI 11.1.1.5 and got the following error:
    oracle.odi.runtime.agent.invocation.InvocationException: ODI-1221: Unable to restart session 5002: session is not found in work repository WORKREP

    It could be the due to issue mentioned in support note
    ODI-1221 Error When Executing Interface Or Package To Standalone Agent Running on OPMN (Doc ID 1482516.1)

Maybe you are looking for

  • Does coherence cache the value from the cache?

    Hi, I have the question about if the coherence caches the value from the cache? I believe it does from my test, just want to get the confirmation. I like to use an example to describe my question. For example: If (key1, value1) are in the cache1, (va

  • How to use Iterator correctly to print out object attributes from  Vector ?

    Dear Java People, I have no compilation errors but am not getting output. I created a CD class and a Vector to hold all the CDs. I think perhaps I am using the Iterator incorrectly in the toSting() method. Below is the driver and CD class Thank you i

  • How to get majority of speed on one device

    I have multiple devices on the e1200 router and i am trying to figure out how to get majority of the speed on one device. And give all the other devices low speeds. help? Solved! Go to Solution.

  • Option to Copy (without headers) gone??

    I am using SSMS 2008 R2 (Version 10.50.4000.0). As of this week, I can no longer copy my results without headers. My settings are Results to grid and I have double-checked that under Tools -> options my Query Results, Results to Grid does NOT have th

  • How do I find, delete or clean out Duplicated photos

    I have synced an iPad mini and iPhone to my computer and have duplicated photos in iPhoto how do I sought through 1000,s of photos to clean out the dulicates?