Run in 64-bit mode when using 32 bit plug-ins?

I have noticed that when I open a project that uses Komplete 7 Elements, a 32-bit bridge utility loads and an error message indicating that the file could not be opened pops up. However, the file project does open. My question is this: Does using 32-bit plug-ins affect performance when Logic runs in 64-bit mode?

Hi,
Based on the error message, we should confirm whether Oracle client tool has been installed on the Report Server at the beginning. If the Report Server installed is 64-bit, we should also install a 64-bit Oracle client tool on the Report Server. Besides, we
can also try to bypass tnsnames.ora file when connecting to Oracle by specifying all the information in the data source instead of using the TNS alias to connect
to the Oracle database. Please see the sample below:
Data Source=(DESCRIPTION=(CID=GTU_APP)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST= server01.mydomain.com)(PORT=1521)))(CONNECT_DATA=(SID=OracleDB)(SERVER=DEDICATED)));
Reference:http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/06/30/ora-12154-tns-could-not-resolve-the-connect-identifier-specified-error-while-creating-a-linked-server-to-oracle.aspx
Hope this helps.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Similar Messages

Firefox 5 request to restart in 32-bit mode when using hotmail ... again .... :(

Firefox 5 request to restart in 32-bit mode when using hotmail ... again .... :(

Not all plugins support 64 bit and if not then you need to start Firefox in 32 bit mode to use that plugin.
# Close Firefox
# Start the Finder and open the Applications folder
# Right click or control-click the Firefox.app icon
# Select "Get Info"
# Select or Deselect "Open in 32-bit mode"
# Close the "Firefox Info" window
# Restart Firefox

IPhoto 6 Unable to Zoom in Full Screen Mode when using projector

When in full screen mode in iPhoto 6 I am able to zoom quite nicely but when I attach a projector I lose the slide for zooming. How do I zoom in full screen mode when using a projector?
Mac Book Mac OS X (10.4.9)

ParkerT
Given that the zoom works normally, this is not an iPhoto issue. The problem lies in the interaction between your MacBook and the Projector. You might have more luck posting on the MacBook forum
Regards
TD

Use Only Certified Plug-Ins - No effect when unchecking

General Preference>Application Startup: Use Only Certified Plug-Ins
The checkbox can be either selected or not - the Certified Mode indicates always YES. How can this be corrected? I neet to have Certified Mode set to NO
I'm using Acrobat X 10.1.2 as part of CS 5.5 on Windows 7
Thanks
Jo

Yes - I have restarted Adobe as well as the PC. I have double checked this settings on other Acrobat installations. All show exactly the same problems.
Unchecking “Use Only Certified Plug-Ins” has no effect. “Certified Mode” shows always YES.
Is this by design? Is this a bug?
Von: Bernd Alheit [email protected]
Gesendet: Mittwoch, 22. Februar 2012 17:39
An: Frei, Joerg
Betreff: Use Only Certified Plug-Ins - No effect when unchecking
Re: Use Only Certified Plug-Ins - No effect when unchecking
created by Bernd Alheit <http://forums.adobe.com/people/Bernd+Alheit> in Creating, Editing & Exporting PDFs - View the full discussion <http://forums.adobe.com/message/4222524#4222524

Safari quits when using librooksbas.dylib plug-in and Rapport switched on. Any way I can keep Rapport on?

Safari quits when using librooksbas.dylib plug-in and with Rapport switched on. Hence can only use Safari with Rapport switched off. Anyone know how to keep Rapport on and use Safari?

While the usual advice is to remove Rapport, there have been a number of recent reports where both that & genieo adware were involved.
See Adware Removal Guide : Genieo
or
You installed the "Genieo" search-hijacking rootkit.
to find out which files to check for.
Otherwise, if you really want to keep it, perhaps uninstall it completely, including any Safari extension; then reinstall.

Using 32-bit Plug-ins with jBridgeM and Metaplugin -- crash?

Hi all,
I just switched from MainStage 2 to 3.1.1 because 2 kept crashing.
Since I use a couple of 32-bit plug-ins (VB3 and Dune), I had to get jBridgeM and Metaplugin.
Now I can crash MainStage in no time at all.
Does anyone have (positive) experience with using 32-bit plug-ins (or VSTs) with "wrappers" in MainStage 3?
Are people complaining LOUDLY to Apple about removal of the support for 32-bit components (and VSTs in the first place) in their "professional" music apps.
stp

Hi again,
To add to the above note, the tools I found are:
     jBridgeM - wraps 32-bit VSTs for 64-bit hosts
     VSTAU Manager - wraps VSTs as AUs
     Metaplugin - lets you plug VSTs into an AU host
Unfortunately, the workflow doesn't produce working plug-ins, and there's no 32-to-64-bit wrapper for AUs.
Does anyone else have this issue?
Are the other wrappers (e.g., FXpansion's) any more reliable?
stp

What is the best way to avoid latency when using the io plug in?

What is the best way to avoid latency when using the io plug in?

Hi colin a.
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
Logic: About I/O buffer size and monitoring latency
http://support.apple.com/kb/ht1314
Cheers,
- Judy

TS4498 Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loq

Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loqic X. So I would suggest to make a bridge in Logic X. As it was in version 9 of the Logic.

In addition.. Focusrite have stated they will not be releasing a 64bit version of Liquid Mix as they consider it outdated software these days.... even though at one point a limited release beta version had a 64bit AU version included but it was so unstable it was rapidly dropped...
However the 32bit to 64bit bridge plugin 32 Lives, states it will handle and 'convert' the Stereo version of Liquid Mix to 64bit but not the Mono version... within LPX
http://www.soundradix.com/products/32-lives/compatibility
Finally, like others here, I would be extremely surprised if Apple added 32bit AU support back into LPX.. That '32bit tech' is long dead and gone....in terms of modern DAWs... as it is in other DAWs such as the recent PT versions...

Using third party plug-ins

Hi.
How do I use third party plug-ins. I've just installed SSL LMC-1 component, but i can't find in the insert pop-up menu on the Logic channel strip.

Hi,
I had that plugin,but it no longer shows up under Logic 7.2.3,which is what I'm running now.So I do not use it anyomer,at least until it is updated.
Although a cool plugin,you might want to try either the Free Fish Fillets,which sound better to me,or another pay plugin like the Nomad Factory BT Compressor FA770 which is like the Fairchild,very close in fact.
Cheers

Will 32 bits plug-ins for AE CS5 and 64 bits plug-ins for AE CS4 work ?

Hi
I have a couple of queries on plug-ins. Basically they are the same query
a) Will 32 bits plug –ins like Magic Bullet, Twixtor, Trapcodes, Boris etc work proplerly with 64 bits Adobe AE CS5 ?
b) Inversely, will 64 bits versions of plug –ins like Magic Bullet, Twixtor, Trapcodes, Boris etc work proplerly with 32 bits Adobe AE CS4 ?
Both the above on 64 bits computers.
Thanks

No and no.
from "Plug-ins":
"Important: Because After Effects CS5 is a 64-bit application, only 64-bit plug-ins can run in After Effects CS5. Plug-ins created for previous, 32-bit versions of After Effects will not run in After Effects CS5. To inquire about availability of 64-bit versions of plug-ins, contact the plug-in vendor or provider."

Stage3d will always fall back to software mode when using flash player 11.6 content debugger

I just update my flash player and air sdk to 3.6. My game is being developing using starling. And after update was complete, weired things happened. First,it would always fall back to software mode when debugging with content debugger. I just couldn't get to the gpu mode with content debugger! Second, when I run my game with IE 10 with flash player 11.6, some transparent black skins becomes transparent white skins!!!! That drives me crazy! Surely there are lots of bugs with the release of flash player 11.6 for windows 8!

I just update my flash player and air sdk to 3.6. My game is being developing using starling. And after update was complete, weired things happened. First,it would always fall back to software mode when debugging with content debugger. I just couldn't get to the gpu mode with content debugger! Second, when I run my game with IE 10 with flash player 11.6, some transparent black skins becomes transparent white skins!!!! That drives me crazy! Surely there are lots of bugs with the release of flash player 11.6 for windows 8!

Hyperlink not working in presentation mode when using alternate display

Made hyperlinks to jump from slide x to slide y
That worked fine when testing in presentation mode
When the same file is played using a beamer as alternate display the hyperlinks are not recognised: clicking will start the next build of the presentation

Is there anybody who successfully used a hyperlink to jump from slide A to slide Y? (and when using the beamer as an alternate display, using the macbook pro screen for the presentation notes)
If so, I can try to find out what I do wrong, otherwise it might be a bug in Keynote'08
thanks for your attention in this matter!!

Run a client-side program when using web-enabled forms(host command)

I am trying to run a local program on my windows machine when i press a button on the oracle web form SCAN[Host('C:\scktscan.exe')]. It trys to execute the program on the server machine and not the client machine. The button will work when forms are run in client-server mode. How can i get the button to access a program on the client machine when the forms are run on the web?

In order to execute a program at the client pc, you must implement a java bean.
Have a look at the demos extension pack 1 (http://otn.oracle.com/sample_code/products/forms/content.html)
It explains also how to implement this in your own application.

Running BDC in 'A' mode when called from Enterprise portal

HI All,
I have created a RFC which contains a BDC program that update data in SAP R/3. The RFC is called from Enterprise portal. Is it possible to run the rfc in A(all screen display) mode while calling from EP. I have tried it but it gives following 2 errors on EP
cm_no_data_received
rfc_error_communication
what changes i have to do so that i can run the BDC in 'A ' mode when called from Enterprise portal

it would not be related to EP administration issues but something to do with GUI usage. it is loggically fare enough not to give options of viewing the debug screen in as it might concern security issues inway the data could be edited at any point of time. Moreover the screens u see in R3 are ABAP but whereas in EP it is purely based on Java and the calls to SAP is done via JCO thus enabling ABAP functionalities in EP. Maybe for these technical reasons or constraints it wont be possibel to view the screen in EP eventhough u had ext.bp activated

How do I switch from"Offline Mode" when using Firefox on an android device connected to the internet via Bluetooth.

I have been using my tf300. Everytime I try to open Firefox on the tablet while using a Bluetooth connection, the only screen that Firefox opens is a generic screen displaying "Offline mode". Is there a way to switch it to online mode or am I only able to use the browser on a wifi signal??

I am one of the individuals who use a third-party app to tether internet connection from my phone for my tablet. When using the stock browser, i have no problems, but when i try to use firefox, all the is displayed is an "Offline Mode" screen. This all would not be a problem except for the fact that a bunch of my bookmarks are on Firefox. So how do i switch settings for the pade to be "Online vs. Offline"???

Run in 64-bit mode when using 32 bit plug-ins?

Similar Messages

Maybe you are looking for