Run Operating Systems command.

Hi Experts,
Please provide information on Run Operating Systems commands for File adapter.
I have gone through t he below mentioned link already:
[http://help.sap.com/saphelp_nw04s/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm]
Also , please provide links for OS commands whch can be used for windows OS.
thanks,
Neha

Hi Neha,
pls do chk this linkfor windows OS commands
http://webtools.live2support.com/windows/
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapXIFileAdapterOSCommandLine+Feature
An interesting usage of Variable Substitution in XI
Solution to the problem encountered using Variable Substitution with XI-SP12
Copy a file with same filename using XI
thanx
Sampath
Edited by: venkata sampath on Jul 8, 2008 7:20 AM

Similar Messages

File Receiver Adapter:Run Operating System COmmand after message Processig:

Dear All,
I have gone through this link
[http://help.sap.com/saphelp_nw2004s/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm]
But i have a problem.
In the scenario which we have, File name is DYNAMICALLY GENERATED by a UDF
I want to call the file at run time after message processing via Command Line and execute some os commands.
But since the file name is Dynamic....How will i call the file at run time in Command Line:
SYNTAX: %f(FileName)
How will i specify the file name in the above syntax as the file name is Dynamic and not constatnt.
Please Advice.
Senthilprakash.

Dear All,
Yes just now i got the answer from this thread[OS command line script - Need help;
Actually i have another doubt now
In REVEIVER FILE ADAPTER:
when we give Run Operating system Command After Message processing
does the OS command get executed after the output file is placed in the Receiver folder/server or before its placed in the receiver folder?
Regards,
Senthilprakash.

Run operating system command for sender File adpter (NFS)

Hi All,
iam doing a file to RFC scenario, using 'Run operating system command' in sender file adapter to change the file name while archiving (after processing completed).
I mention OS command like this:
sample_server\scripts\Test\Rename.bat"
Rename.bat file calls a 'perl script' code.
when i run interface, could see below statement in adapter log ->
"Execute OS command "
sample_server\scripts\Test\Rename.bat"
but the script was not run and file name was not changed.
Please advice what could be the problem?
Does this mean script executed successfully?
Do i need install perl software on XI server, even perl script (.bat file) is executing on sample_server?
Thanks in advance..
Regards,
Rajesh

Hi,
Just check the following URL and give it a try again :-
Executing Unix shell script using Operating System Command in XI
Hope this info Helps..
Regards,
Aditya

RUN OPERATING SYSTEM COMMAND BEFORE MESSAGE PROCESSING

hi.
just i want to know what is the purpose of run operating system command before message processing,after message processing under file sender adapter.
waiting for your great answer.
bye.
regards.
seeta ram.

Hello Seeta,
let me see if I give it using a simple scenario that I implamented : i nedd to transfer a very large file from one server to the other by XI.
to save space and network traffic I use an OS command before picking up the file to run a zip command to zip the file.
after I transfer the file to the target server I run another OS command after the transfer to unzip the file.
now to your second question:
the before Os command on the target server is used mostly for checks (make sure there isn't a file by that name or backing up existing data)
and the after sender OS command is usualy for backing up or erasing existing files (cause it is done only after the first part was finished succesfully).
Uri Lifshitz.
p.s.
there was a blog obout this titled "XI as a huge file mover"
and you can see a description and my scripts at https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/03/additionaltipsforusingXIasahugefiletransfer%28withbatchscripts%29&

Run Operating System Commands

Hi,
There is an urgent requirement, i want to know about Run Operating System Commands in file adapter. What are all possible commands for windows operating system? and how it works? Kindly send me your suggestions and links at the earliest.
Your help will be appreciated.
Thanks,
Sadhna.

Hi,
Run Operating System Command Before/After Message Processing
●      Command Line
An operating system command specified here is executed before or after the message processing of a file that was found in a run. The default value is an empty character string (no command).
When the operating system command is called, the file name currently being processed can be specified with the following placeholders:
●        %f (file name)
●        %F(absolute file name including path)
●      Timeout (secs)
This specifies the maximum runtime of the executing program in seconds. When this time interval is exceeded, the adapter continues processing. The executing program continues to run in the background.
●      Terminate Program After Timeout
Set this indicator if the adapter is to terminate the executing program when the timeout is exceeded.
The adapter writes the output (STDOUT and STDERR) for the operating system command in the system trace.
Regards,
Phani

How to Run Operating System Command Before/After Message Processing SAP PI

Hi,
We are trying to execute multiple commands via "Operating System Command Before/After Message Processing".
When we use single command say for example cp or mv (copy or move) the commands get executed fine.
eg: cp %F /var/opt/data/outbound/Test/Dummy.txt
/this works fine/
when we club commands together or try to redirect the outputs of commands, none of the commands get executed.
eg:
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
or
wc -l %F > /var/opt/data/outbound/Test/Dummy.txt
Is it possible to execute multiple commands or redirect the output of commands without using a shell script? The PI server we are working on iis hosted on UNIX environment.

Hi Harleen,
try like this
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
instead of semicolon try this
(1) &
command1 & command2
Execute Command1 and then execute Command2
(2) &&
command1 && command2
Runs the command2 only when command1 doesn't Complete successfully
(3) ||
command1 || command2
Runs the second command if the first command had an error
(4) ()
(command1 || command2) || (command3 & command4)
Defines the order in which commands are to be executed
Regards
Suraj

Regarding Run operating system command

Hi experts,
I have a requirement of creating an empty file onto the same folder where my reciever file adapter writes the result file. Is it possible in case of FTP as well or is just supported for NFS?
Regards,
Amol

Hi Amol,
I have no experience with scripts. But if my understanding is correct, you can achieve this. The script file to be called should be placed in your XI server. The script file will have commands to do the FTP and create file in the remote FTP server. Although I have never worked on scripts to be 100% sure. May be a person familar with scripts can give the cirrect info.
Regards,
Jai Shankar

Operating system command in file receiver adapter

Hi,
How to use the Run Operating system command after message processing option in the parameters tab of the file receiver adapter.
I am working on a scenario wherein a batch file needs to be invoked after the file is written on the file system.
So how do i invoke this batch file from the file reciever adapter ( Run Operating system command after message processing ).

Hi,
did you see this page?
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/556cb799c93677e10000000a114a6b/content.htm
it shows all you need to know
Regards,
Michal KRawczyk

Problem with zip operating system command

Hello,
i have the following configuration in the file receiver adapter:
Directory: /tmp/
File Name Scheme: %name%.txt
Variable substitution:
Variable Name: name Reference: payload: record,1,name,1
Run Operating system command:
/usr/bin/zip /tmp/%f.zip %F
The execution is succesful, but i have a small problem. The file name is "file.txt.zip", the .txt should appear but i dont know how to skip it, I have tried so many ways but it doesnt work, I should receive a file called "file.zip" With a file inside in txt format...
Thanks,
Luis

Hi Sriram,
Thanks, but that wouldnt work out, Im using the %f for my file name, so this move command shouldnt work for me, because my filename changes in every execution, so I cant write something like this: mv file.txt.zip file.zip
The only solution I see would would be a command which deals with strings and that could remove the four last characters of "%f"..but I havent found anything for doing it.
Regards,
Luis

Execute external operating system command

Hi Friends,
I have a requirement to run a script file with extention '.PL' on the application server using ABAP.
i have sample how to run it in XI.
XI3.0 provides a very simple way of handling this using the "Operating System Command" in the File Adapter.
I post my output file in the following folder,
/usr/sap/sapout/test/
The shell script is available in the following path,
/usr/sap/bin/convert.pl
The figure below explains as to how we call the shell script using "Operating System Command".
File Acess parameters
      Target Directory      = /usr/sap/sapout/test/
      File Name Scheme = TestOutput.txt
Processing Parameters
     File Construction Mode          = Add Time Stamp
     File Type                              = Binary
     Operating System Command = /usr/sap/bin/convert.pl %F
I have to do the same thing in ABAP as it has been done for XI as mentioned in the above example.
My operating system is UNIX.
If any one can give me a sample it would be really helpful to me.
Thanks in advance,
Arundhathi.

Hi Arundhati,
You can run operating system commands from ABAP.
e.g. If you want to change UNIX right for any file, you can use following code.
lv_ucomm = 'chmod a+rwx 123.txt'.
CALL 'SYSTEM' ID 'COMMAND' FIELD lv_ucomm.
whatever command you provide in Field parameter ( lv_ucomm in the above case ), ABAP run that command at operating system level.
In your case, you can provide command in lv_ucomm to run script at operating system level.
Hope it will help you.
Regards,
Naren

What is Operating System commands in Adapter Configuration??

Hi Frnds,
When we will use Operating system commands Option in Adapter Configuration??
Regards,
Raj

Hi,
Go through this blogs..
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi
When we will use Operating system commands Option in Adapter Configuration??
http://help.sap.com/saphelp_nw04/helpdata/en/0d/00453c91f37151e10000000a11402f/content.htm
Go through this link some experts discussions:
Run Operating System Commands
How to run Operating system command in receiver JDBC Adapter
Hope this info is useful to you..
Thanks,
Satya Kumar..

Unable to run a Batch File Operating System Command

Using XI 3.0, I am unable to run a Batch File Operating System Command After Message Processing.
My Batch file:
gpg -se -r BOA3RSKY --armor --passphrase-fd 0 %1 < C:\Progra~1\GNU\GnuPG\gpgin
My Command Line (ID scenario)
exec "cmd.exe /c C:\Progra~1\GNU\GnuPG\boagpg.bat %F"
If I execute
exec "cmd.exe /c type C:\Progra~1\GNU\GnuPG\boagpg.bat >xis.txt"
It displays the contents of boagpg.bat file in xis.txt.
I just don't understand why when I run the batch file, I would expect an %F.asc encrypted file in the same directory as the %F unencrypted file.
Any ideas?
or will I need Basis to create commands that will allow me to run GPG from XI Command Line?

Check this links if its helpful
http://help.sap.com/saphelp_nw04/helpdata/en/bb/c7423347dc488097ab705f7185c88f/frameset.htm
/people/sap.user72/blog/2004/01/30/command-line-help-utility
Check this thread a similar problem
Process Integration (PI) & SOA Middleware
Note 841704 - XI File & JDBC Adapter: Operating system command
http://service.sap.com/sap/support/notes/841704
Try to see the below links
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
OS Command on FTP
OS command line script - Need help
FTP - Run OS Command before file processing
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Operating System Command After File Processing in Sender File Adapter

Hello guys,
actually we have different interfaces, and the client to take all the files from only one directory, for example D:/DPI.
Unitl now we had one adapter for every file with the content conversion, so we didn't have problems with that. Now we have the problem that we sould maintain an order processing files.
We thougth that an idea could be to execute one file pointing to D:/DPI and at the Operating System Command put like: copy D:/DPI/file.txt D:/DPI/outbound/file.txt, so when file is executed, we move the next file to another directory where is pointing the adapter. Doing this we have an error on the adapter giving us the message: Could not process due to error: java.lang.NullPointerException
We are using a Windows.
There is anyway to do in our way, or there is a better solution to resolve this problem?
Any other idea to do this?
Many thanks in advance.
Regards,
Xavi.

Helo Guys,
maybe I haven't explained well.
We have one directory with different files. We have one adapter for every file( we need for the content conversion ) using NFS and all the adapters are pointing to the same directory.
The problem is that if we have files A.txt, B.txt and C.txt we need to process in an order.
And the problem we see is that for every file we have one adapter, so for example if we process file A.txt with one adapter, when this part is finished, we want to process file B.txt with another adapter, and the same for the rest of the files.
So the idea we had is to create another directories, and when A.txt has finished move file B.txt to another directory.
However this way is not running, if we log on the PI machine and execute cmd, we can do a copy of one file from one directory to another, but when we put this sentence in the adapter in OS command if we see the adapter log we see an error executing the OS command, but we don't know what is the error, there is no more information.
There is any way to do this or maybe we have to manage in a different way?
Many thanks in advance.
Regards,
Xavi.

How to call Operating System commands / external programs from within APEX

Hi,
Can someone please suggest how to call Operating Systems commands / external programs from within APEX?
E.g. say I need to run a SQL script on a particular database. SQL script, database name, userid & password everything is available in a table in Oracle. I want to build a utility in APEX where by when I click a button APEX should run the following
c:\oracle\bin\sqlplusw.exe userud/password@database @script_name.sql
Any pointers will be greatly appreciated.
Thanks & Regards,

Hi Guys,
I have reviewed the option of using scheduler and javascript and they do satisfy my requirements PARTIALLY. Any calls to operating system commands through these features will be made on the server where APEX is installed.
However, here what I am looking at is to call operating systems programs on client machine. For example in my APEX application I have constructed the following strings of commands that needs to be run to execute a change request.
sqlplusw.exe user/password@database @script1.sql
sqlplusw.exe user/password@database @script2.sql
sqlplusw.exe user/password@database @script3.sql
sqlplusw.exe user/password@database @script4.sql
What I want is to have a button/link on the APEX screen along with these lines so that when I click that link/button this entire line of command gets executed in the same way it would get executed if I copy and paste this command in the command window of windows.
Believe me, if I am able to achieve what I intend to do, it is going to save a lot of our DBAs time and effort.
Any help will be greatly appreciated.
Thanks & Regards,

Is it possible to call operating system command after file receive?

Hi expert,
I'm trying to call operating system command after file receive comm.channel receive a txt file.
operating system command uses txt file name as parameter.
Is it possible? How?
Thanks.

Hi,
It should be possible, actually we have two options that are
1.RUN OS command before message processing
2.RUN OS command after message processing.
So you can give the commands in the RUN OS command after message processing.
Check this links for more info
http://wiki.sdn.sap.com/wiki/display/XI/SAP%20XI%20File%20Adapter%20OS%20Command%20Line%20Feature
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/556cb799c93677e10000000a114a6b/content.htm
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID1690747750DB11724434094963199241End?blog=/pub/wlg/10392
Regards
Ramesh

Run Operating Systems command.

Similar Messages

Maybe you are looking for