Run Oracle Web Logic and Oracle Application Server 10g on same server

Since oracle has chosen to release adf faces 11g, before the SOA suite 11g is released, we are facing the challenge to run both Oracle Web logic and Oracle Application Server 10g on the same server.
If anyone have any experience in this setup or has knowledge of other feasable setups please let me know.
Regards.
Jan

What version of Oracle Application Server 10g are you installing?
If you are installing 10gR2 (v10.1.2.x) have you taken a look at point #70 in "Table 2 Additional Information for Certified Platforms" section here?
http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html
Thanks
Shail

Similar Messages

Build a dicom server with web logic and Oracle Multimedia DICOM

Its it possible, build My own dicom server...only using web logic + java + Oracle Multimedia DICOM ?

Hi,
In The LDAP side you need to increase:
MaxPageSize - This value controls the maximum number of objects that are returned in a single search result, independent of how large each returned object is. To perform a search where the result might exceed this number of objects, the client must specify the paged search control. This is to group the returned results in groups that are no larger than the MaxPageSize value. To summarize, MaxPageSize controls the number of objects that are returned in a single search result.
Default value: 1,000
For more informations please refer to : http://support.microsoft.com/kb/315071
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

Error while running application under Oracle Web logic server 10.3

Hi all,
I am using Oracle Web logic server 10.3 to run reports(CR4E).when at the time of adding server in to crystal report application
i had taken Application Development Support Then at run time it is showing following error message
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException---- Error code:-2147467259 Error code name:failed
How to Solve these critical problem
Thanks ,
Amol Patil

Hi Rahul,
Server logs may contain JDK warnings such as the following if the jdk folder is an mklink.
*[WARN ][osal ] Could not add counter (null)\ for query*
*[WARN ][osal ] Failed to init virtual size counter.*
These are just warnings and do not affect any servers.
Workaround
To suppress these warnings, add the following line in the FRAMEWORK_LOCATION\provisioning\provisioning-plan\fusionapps_start_params.properties file
-Xverbose:osal=error
You can even try the solution provided in below link
http://hirt.se/blog/?p=169
Regards
Fabian

Monitor loggedin user in Oracle Web Logic Server

Dear All,
We are using IPM (11.1.1.3.0) with Oracle Web Logic Server 10.3.3.0 (Embedde LDAP).
Can you please let me know how to monitor user login sessions (which user login at what time to the system, when he last loggedin) from Web Logic Server ?
Also let me know whether it is possible to create a monthly report of each user login duration and how can I do it.
Thank You

>
For Oracle Forms and Reports 11g Release 2 (11.1.2), download Oracle WebLogic Server 11g (10.3.5) from OTN or
>
from http://docs.oracle.com/cd/E23104_01/download_readme_cr2/download_readme_cr2.htm#BABDBHCJ
Oracle Fusion Middleware 11g Software
http://www.oracle.com/technetwork/middleware/weblogic/downloads/index.html

Diff between Oracle 9i database and 9ias application server.

Can any one brief in detail the difference between Oracle 9i database and 9ias application server.

Hi,
Your question is the answer. Oracle9i Database manages all your eBusiness data and Oracle9iAS runs all your eBusiness
applications. In a 3 tier architecture, Oracle9i Database fits in the Database tier where as Oracle9iAS fits in the middle
tier. Oracle9iAS provides an infrastructure to run different types of applications(J2EE thru OC4J, Forms applns, Portal
based applns, Wireless applns etc..)
Cheers !
-- Rajesh
Can any one brief in detail the difference between Oracle 9i database and 9ias application server.

ACE and Oracle Web logic

Hi All,
I have here a 6509-E chassis with a Sup720 in it and an ACE module also in it.
Our enviornment is getting oracle web-logic virtual servers via OVM. Our ERP team would like to be able to load-balance to the web servers located in the oracle OVM box. The Oracle OVM stuff, as near as I can make out uses java processes to direct traffic once it hits the box to the virtual web servers it contains. The java processes listen on different ports, thereby meaning there can be loads of web servers on the one box assuming the physical box has enough resources.
That said, I currently have three web servers all sitting on the one physical box.
For example:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
server1 = http://10.1.95.70:9999
server2 = http://10.1.95.70:9888
server3 = http://10.1.95.70:9777
The Company bought ACE modules a while ago and we'd like to be able to use them to load balance across the three servers (there are a lot more than three but this illustrates the point).
In the configuration of the ACE module, the rserver mode (real server) requires an IP to be assigned to the rserver, this is the real IP address of the actual server and is classes as 'serverside' I think:
eg
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
rserver host SVR_9999
description Real Server 9999
ip address 10.1.95.70
inservice
As the second web server also resides on that same IP, should it not also have the same IP? ie
rserver host SVR_9888
description Real Server 9888
ip address 10.1.95.70
inservice
When I try to enter in the ip address however it errors out with a duplicate:
ACE1/TEST_CTX(config)# rserver host SVR_9888
ACE1/TEST_CTX(config-rserver-host)# ip address 10.1.95.70
Error: Duplicate IP address or subnet
My question is: Is there a way I can use the ACE module to load balance to different web servers on the one IP address (assuming the rest of the configuration is fine)?   Something that would achieve the following eg?
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
rserver host SVR_9999
description Real Server 9999
ip address 10.1.95.70:9999
inservice
rserver host SVR_9888
description Real Server 9888
ip address 10.1.95.70:9888
inservice
Many thanks in advance.
Brad

Hi
You need to create one rserver and multipul serverfams with port number as follow.
rserver host SVR_1
description Real Server
    ip address 10.1.95.70
inservice
rserver host SVR_2
description Real Server
    ip address 10.1.95.70
inservice
serverfarm host SRV_9999
    rserver SVR_1 9999
      inservice
    rserver SVR_2 9999
       inservice
serverfarm host SRV_9888
    rserver SVR_1 9888
       inservice
    rserver SVR_2 9888
       inservice
serverfarm host SRV_9777
    rserver SVR_1 9777
       inservice
    rserver SVR_2 9777
       inservice
sticky ip-netmask 255.255.255.255 address both STICKY_9999
timeout 510
replicate sticky
serverfarm SRV_9999
sticky ip-netmask 255.255.255.255 address both STICKY_9888
timeout 510
   replicate sticky
   serverfarm SRV_9888
sticky ip-netmask 255.255.255.255 address both STICKY_9777
timeout 510
   replicate sticky
   serverfarm SRV_9777
class-map match-all VIP_9999
2 match virtual-address xxx.xxx.xxx.xxx tcp eq 9999
class-map match-all VIP_9888
   2 match virtual-address xxx.xxx.xxx.xxx tcp eq 9888
class-map match-all VIP_9777
   2 match virtual-address xxx.xxx.xxx.xxx tcp eq 9777
policy-map type loadbalance first-match SLB_ORACLE_9999
class class-default
    sticky-serverfarm SRV_9999
policy-map type loadbalance first-match SLB_ORACLE_9888
   class class-default
     sticky-serverfarm SRV_9888
policy-map type loadbalance first-match SLB_ORACLE_9777
   class class-default
     sticky-serverfarm SRV_9777
policy-map multi-match ORACLE
class VIP_9999
    loadbalance vip inservice
    loadbalance policy SLB_ORACLE_9999
    loadbalance vip icmp-reply
class VIP_9888
    loadbalance vip inservice
    loadbalance policy SLB_ORACLE_9888
    loadbalance vip icmp-reply
class VIP_9777
    loadbalance vip inservice
    loadbalance policy SLB_ORACLE_9777
    loadbalance vip icmp-reply
interface vlan xx
   ip address yyy.yyy.yyy.yyy 255.255.255.0
     service-policy input ORACLE
Regards,
Vashdev

Change from jboss to Oracle Web Logic Server

Dear all
Currently, we have used the jboss for start T24 Browser, ATM, ... Now we want to change it to ORACLE WEB LOGIC SERVER
Could you please guide me detail as per-requisist , license , how to configure, where could i download to test it?
Thanks

Hi,
Please follow the below steps :-
1)In order to install Weblogic it depends on the type of OS bit version.
If you would install it on a 32 bit version then it has embedded JDK in it but if you use 64 bit then you need first either install Sun JDK or Jrockit JDK 64 version and download the Generic jar and install it.
Java 64 bit could downloaded from the below URL :-
http://www.oracle.com/technetwork/java/javase/archive-139210.html
Note :- Java 8 is not supported or certified with Weblogic.So request you to either use Java 6 or Java 7 depending upon the version of Weblogic and its certification.
====
2)Could you please refer to the below certification matrix to verify if the OS is supported with Weblogic on which the configuration would be done :-
   Oracle Fusion Middleware Supported System Configurations
    Either you could use Weblogic 12C or Weblogic 10.3.1 to 10.3.6 depeding upon your requriement.
3)Please follow the below link where all the Weblogic installers could be downloaded :-
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
   "Accept the License " to download the installers.
4)Regarding License it would be better to check with Oracle SAN for you account or contact Oracle Support depending upon the region you belong to by following the below URL :-
   http://www.oracle.com/us/support/contact/index.html
Regards,
Prakash.

Can we run oracle Forms 5 Application with 10G in Client/Server?

Hi All,
Can we run oracle Forms 5 Application with 10G in Client/Server
Mode?
Regards
Gaurav

In theory you can run it 2 tier - which means that you have the client (the machine the user is sitting at) being the same machine in which the forms application server is running. So yes. But specifically, we don't support a client server runtime anymore. 6i was the last version.
With 10g you will be running through a browser.
Regards
grant

What difference between Oracle 9i AS and orion application server?

Hi:
Today I visited some website and read an information that Oracle 9i AS and orion application server are two differece application server.But When I start Oracle 9i AS ,I must use command of "java -jar orion.jar".Are they the same application server? If not ,can you tell me what difference?
Thanks
Best regards,
hyson

Hi Liu,
I'm sure other people will coreect any errors I am about to make
(if I make any :-), but some time ago, Oracle mad a licensing
agreement with a company called IronFlare, regarding IronFlare's
application server product called OrionServer. After that, Oracle
came out with a new product -- Oracle Containers for Java (OC4J)
-- which is based on OrionServer. In the first version (that had
the version number 1.0.2.2), the application server basically came
bundled in the "orion.jar" file, so in order to start up the application
server, you used a command like:
java -jar orion.jar
However, the next version of OC4J (with version number 9.0.2.0.0
[go figure ;-]), contained the "oc4j.jar" file (which replaced
the "orion.jar" file).
So I would say that the first version of OC4J was almost identical
to OrionServer. But I think subsequent versions are becoming more
and more different. Remember that at the same time, OrionServer
is also still being developed. I think the first version of OC4J
was based on version 1.5.2 of OrionServer. The next version of
OrionServer (that should be released soon) is version 1.6.0.
I have no idea how similar the latest version of OrionServer is
to the latest version of OC4J. But if Oracle's history is any
guide, then I would say that, eventually, OC4J and OrionServer
will have very little similarity between them. Just look at the
paths that Oracle's JDeveloper has taken in comparison with Borland's
JBuilder. Originally, JDeveloper was based on JBuilder. Today,
they are two completely different products.
Hope this has helped you.
Good Luck,
Avi.

Oracle Web Logic Server requirement

Dear All
Currently my system use jboss now I want to change to use ORACLE WEB LOGIC SERVER, Thus I would like the per-requisite on capability as cpu, ram, server ...
Please clarify me, otherwise provide me the advantages on it
Thanks

Hi,
Please check the below link for system requirements to install Weblogic.
Preparing for Installation - 11g Release 1 (10.3.6)
Thanks,
Sharmela

Oracle 11G database and Application Server installed on same server

What are the pros and cons installing Oracle 11G database and Oracle Application Server (Forms and Reports) on the same server?
Thank you in advance, Sonya

Some may want their data in a separate network zone for security reasons.
It also depends if it is the same people that do maintenance on db and appserver.
It is lower cost with one server, and only 1 Os to set up.

Issue in calling web service from SoapUI 4.0.0 to Oracle web logic server10

Hi All,
I am trying to call a web service from soapUI 4.0.0 to Oracle Web logic server 10.3 in which primavera p6 war file is deployed..
getting an error::*this class does not support saaj 1.3*
setting the following system property in the Weblogic startup script:
-Djavax.xml.soap.MessageFactory=com.sun.xml.internal.messaging.saaj.soap.ver1_1.SOAPMessageFactory1_1Impl does not work..
setting the following system property in the Weblogic startup script:
-Djavax.xml.soap.MessageFactory=weblogic.xml.saaj.MessageFactoryImpl
even does not work..
how to resolve this error,plz help me its urgent..

Have you tried submitting your help request on the SmartBear soapUI forum?
http://www.eviware.com/forum/viewforum.php?f=5
Or if a soapUI Pro user:
http://www.eviware.com/forum/viewforum.php?f=2
Best,
Alex

Download between Oracle 9i Database and Oracle 9i DS

I have download the files for Windows 2000.
Oracle 9i Database version 9.0.2.1
Oracle 9i DS version 9.0.2
Download Date: June 7, 2002
These from what I can tell are the lates versions on the website. I installed the database and everything went in fine. I can work with the database and everything. When I use the Universal Installer for Oracle 9i DS, I get an error when it hits 31% that states that this version of DS will not work with a database that is of version 9.0.2.1 or greater.
If anyone can help me it would be a great help,
Greg

Hi,
Your question is the answer. Oracle9i Database manages all your eBusiness data and Oracle9iAS runs all your eBusiness
applications. In a 3 tier architecture, Oracle9i Database fits in the Database tier where as Oracle9iAS fits in the middle
tier. Oracle9iAS provides an infrastructure to run different types of applications(J2EE thru OC4J, Forms applns, Portal
based applns, Wireless applns etc..)
Cheers !
-- Rajesh
Can any one brief in detail the difference between Oracle 9i database and 9ias application server.

Diff Between Oracle BPM Studio and Oracle BPEL Process Manager

1)What is the difference between Oracle BPM Studio and Oracle BPEL Process Manager?
2)What is the connection between Oracle BPM Studio and Oracle BPEL Process Manager?

Hi,
As of today you should install SOA Suite 11g
Fr this you will need to install Database (for development you can use XE)
Run RCU utility to crete DB schemas for SOA Suite.
Install Weblogic server
Install SOA Suite as an option to Weblogic
Create SOA Domain.
It is physically possible to do it in 2GB but is far better on 3 - 4GB
You can consider installing DB on different machine.
Adam

Difference: Oracle Access Manager and Oracle Access Management

Dear,
What is the difference between Oracle Access Manager and Oracle Access Management, both 11g
thanks

Oracle Access Manager is the foundation(main product), of the new Oracle Access Management platform. Access Manager provides the core functionality of Web Single Sign On(SSO), authentication, authorization, centralized policy administration and agent management, real-time session management and auditing. Built as a 100% Java solution, Access Manager is extremely scalable to handle Internet scale deployments and works with existing heterogeneous environments in the enterprise with agents certified on hundreds of web servers and application servers. Access Manager provides rich functionality, extreme scalability and high availability thereby increasing security, improving user experience and productivity and enhancing compliance while reducing total cost of ownership.
Oracle Access management solution provides: Comprehensive Web Access Management, Web Single Sign-On, Identity Propagation, and Federation;Mobile and Social Sign-On;Real-time External Authorization;daptive Access and Fraud Detection
So basically one is a product and the other one is an entire solution.
I hope this helps,
Thiago Leoncio.

Run Oracle Web Logic and Oracle Application Server 10g on same server

Similar Messages

Maybe you are looking for