RUn time error while  saving po    Field symbol has not yet been assigned.

Hi Experts,
I am getting abap dump while saving PO in ME21N  plz seee the below dump  plzzzzzzzzzzzzzzzzzzzzz help me
Runtime Errors         GETWA_NOT_ASSIGNED
Date and Time          19.06.2009 11:24:46
Short dump has not been completely stored (too big)
Short text
     Field symbol has not yet been assigned.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLKKBL" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     You attempted to access an unassigned field symbol
     (data segment 106).
     This error may occur if
     - You address a typed field symbol before it has been set with
       ASSIGN
     - You address a field symbol that pointed to the line of an
       internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "GETWA_NOT_ASSIGNED" " "
    "SAPLKKBL" or "LKKBLF99"
    "GEN_FIELD_OUT2"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
em environment
SAP-Release 700
Application server... "gplqty"
Network address...... "128.12.0.19"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "GPLQTY"
Database type..... "MSSQL"
Database name..... "GPQ"
Database user ID.. "gpq"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 4 2008 02:33:25"
  create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
  Database version. "SQL_Server_8.00 "
  Patch level. 172
  Patch text.. " "
  Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
  SAP database version. 700
  Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
   NT 6.0"
  Memory consumption
  Roll.... 16192
  EM...... 16759360
  Heap.... 0
  Page.... 237568
  MM Used. 12036016
  MM Free. 530432
er and Transaction
  Client.............. 410
  User................ "SAP_SUPPORT"
  Language key........ "E"
  Transaction......... "ME21N "
  Transactions ID..... "9E955CDE97CBF1648B4C001A64C7B85A"
  Program............. "SAPLKKBL"
  Screen.............. "SAPLKKBL 0500"
  Screen line......... 3
Information on where terminated
    Termination occurred in the ABAP program "SAPLKKBL" - in "GEN_FIELD_OUT2".
    The main program was "RM_MEPO_GUI ".
    In the source code you have the termination point in line 2908
    of the (Include) program "LKKBLF99".
Source Code Extract
Line  SourceCde
2878       else.
2879         assign <fs11> to <field>.
2880         gs_fc = gs_sfc11.
2881       endif.
2882     when 012.
2883       if gs_out_flags-slave ne 'X'.
2884         assign <fm12> to <field>.
2885         gs_fc = gs_mfc12.
2886       else.
2887         assign <fs12> to <field>.
2888         gs_fc = gs_sfc12.
2889       endif.
2890     when 013.
2891       if gs_out_flags-slave ne 'X'.
2892         assign <fm13> to <field>.
2893         gs_fc = gs_mfc13.
2894       else.
2895         assign <fs13> to <field>.
2896         gs_fc = gs_sfc13.
2897       endif.
2898     when 014.
2899       if gs_out_flags-slave ne 'X'.

Hi,
this error occurs when you try to address a field-symbol before it has been assigned to a field or
the assignment has failed.
Use following code to remove this dump
Assign <mara-matnr> to <fs>.
if sy-subrc <> 0.
  Error Message.
Endif.
Hope it helps,
Raj

Similar Messages

  • Error While Executing Report - "Field symbol has not yet been assigned."

    Dear All,
    I am using Cube 0PP_C01 which filled with data Source 2LIS_04_P_MATNR.
    Based on this Cube I had developed a report.
    0MRP_CONTRL characteristic filled using 0MATERIAL master data.
    Authorization in this report is based on Characteristic 0MRP_CONTRL & 0PLANT.
    While running report User gets error u201CField symbol has not yet been assignedu201D & Analyzer just quit.
    Also getting dump in tcode ST22.
    This problem occurs when limited authorization of 0MRP_CONTRL & 0PLANT assigned to user & if I provide full authorization 0BI_ALL then report runs fine.
    When I will remove 0MATERIAL characteristic from report then Report runs fine & at a time when I put 0MATERIAL in the report its gives error.
    Please suggest me what to do as I can not give user 0BI_ALL right in RSECADMIN.
    Please help.
    Regards,
    Divyesh Khambhati.

    Hello Shashank,
    Thanks for your reply.
    No material is not checked for authorization relevant.
    Is it required to make 0MATERIAL to be checked as Authorization relevant ??
    I had make 0MATERIAL authorization relevant & assign all material Authorization to User but still error coming..
    I do not have any idea regarding this colon authorization, if possible can you explaine me how I can use this colon authorization ?
    Divyesh Khambhati
    Edited by: Divyesh M Khambhati on Oct 2, 2010 10:29 AM

  • Field symbol has not yet been assigned. ???

    Dear Experts ,
    W hen i tried to execute my program this error appears :
    Short text
        Field symbol has not yet been assigned.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLSLVC" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        You attempted to access an unassigned field symbol
        (data segment 32821).
        This error may occur if
        - You address a typed field symbol before it has been set with
          ASSIGN
        - You address a field symbol that pointed to the line of an
          internal table that was deleted
        - You address a field symbol that was previously reset using
          UNASSIGN or that pointed to a local field that no
          longer exists
        - You address a global function interface, although the
          respective function module is not active - that is, is
          not in the list of active calls. The list of active calls
          can be taken from this short dump.
    and Here is my CODE :
    *& Report  ZPO
    Report  ZPO1.
    type-pools slis.
      PARAMETERS : PO_Doc like EKBE-EBELN DEFAULT '4800000007'.
      PARAMETERS : Plant TYPE WERKS DEFAULT '1000'.
      PARAMETERS : PO_ORG TYPE EKORG DEFAULT ''.
      data TtlS type mara-wesch .
      data TtlH type mara-wesch .
      data Ttl type mara-wesch .
      data ZEKBE type TABLE OF EKBE.
      data ZEKBER type EKBE.
      data ZEKPO type TABLE OF EKPO.
      data ZEKPOR type EKPO.
      data ZEKKOR TYPE EKKO.
      data ZNAME1F type LFA1-LIFNR.
      data ZWGBEZF TYPE T023T-WGBEZ.
      data i type n.
      data counter type n.
    types : begin of SBAGDS,
      Serial Type n, "Purchase Order
      EBELN like EKKO-EBELN, "Purchase Order
      MATNR like EKPO-MATNR, "Material
      TXZ01 like EKPO-TXZ01, "Short Text
      MATKL like EKPO-MATKL, "Material Group
      WGBEZ like T023T-WGBEZ, "Material Group Desc"
      SUBMI like EKKO-SUBMI, "GPM
      CHARG like EKBE-CHARG, "Batch
      LIFNR like EKKO-LIFNR, "Vendor
      NAME1 like LFA1-NAME1, "Vendor Name
      RECV like mara-wesch, "Received Quantity
      REVR like mara-wesch, "Reversed Quantity
      DELV like mara-wesch, "Delivered Quantity
    end of SBAGDS .
    DATA : BAGDS TYPE SBAGDS OCCURS 0 WITH HEADER LINE.
    data Struc like BAGDS.
    data: gr_table like BAGDS OCCURS 0 WITH HEADER LINE.
    data: gt_fieldcat type slis_t_fieldcat_alv, gt_outtab type SBAGDS occurs 0 with header line.
    INITIALIZATION.
    i = 0.
    counter = 0 .
    perform field_cat_init using gt_fieldcat[].
    FORM field_cat_init using rt_fieldcat type slis_t_fieldcat_alv.
    data: ls_fieldcat type slis_fieldcat_alv,
             pos type i value 1.
    clear LS_FIELDCAT.
    *Column 1
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'Serial'.
    ls_fieldcat-SELTEXT_L      = 'Serial'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 2
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'EBELN'.
    ls_fieldcat-SELTEXT_L      = 'Purchase Order'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 3
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'MATNR'.
    ls_fieldcat-SELTEXT_L      = 'Material'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 4
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'TXZ01'.
    ls_fieldcat-SELTEXT_L      = 'Short Text'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 5
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'MATKL'.
    ls_fieldcat-SELTEXT_L      = 'Material Group'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 6
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'WGBEZ'.
    ls_fieldcat-SELTEXT_L      = 'Material Group Desc'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 7
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'SUBMI'.
    ls_fieldcat-SELTEXT_L      = 'GPM'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 8
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'CHARG'.
    ls_fieldcat-SELTEXT_L      = 'Batch'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 9
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'LIFNR'.
    ls_fieldcat-SELTEXT_L      = 'Vendor'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 10
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'NAME1'.
    ls_fieldcat-SELTEXT_L      = 'Vendor Name'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 11
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'RECV'.
    ls_fieldcat-SELTEXT_L      = 'Received Quantity'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 12
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'REVR'.
    ls_fieldcat-SELTEXT_L      = 'Reversed Quantity'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 13
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'DELV'.
    ls_fieldcat-SELTEXT_L      = 'Delivered Quantity'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    endform.
    START-OF-SELECTION.
           select SINGLE * from EKKO into ZEKKOR where EBELN = PO_DOC.
           select SINGLE * from EKPO into ZEKPOR where EBELN = PO_DOC.
           select SINGLE NAME1 from LFA1 into ZNAME1F where LIFNR = ZEKKOR-LIFNR.
    *         ' Buliding Structure
              Struc-EBELN = ZEKPOR-EBELN.
              Struc-SUBMI = ZEKKOR-SUBMI.
              Struc-LIFNR = ZEKKOR-LIFNR.
              Struc-Name1 = ZNAME1F.
           select * from EKPO into TABLE ZEKPO where EBELN = PO_Doc and WERKS = plant.
           LOOP at ZEKPO into ZEKPOR.
               select SINGLE WGBEZ from T023T into ZWGBEZF  WHERE MATKL = ZEKPOR-MATKL .
               counter = counter + 1.
    *         ' Buliding Structure
              Struc-Serial = counter.
              Struc-MATNR = ZEKPOR-MATNR.
              Struc-TXZ01 = ZEKPOR-TXZ01.
              Struc-MATKL = ZEKPOR-MATKL.
              Struc-WGBEZ = ZWGBEZF.
    *          Calcualting Debit transactions from PO History
               select * from EKBE into table ZEKBE where EBELN = PO_Doc and MATNR = ZEKPOR-MATNR and  EBELP = ZEKPOR-EBELP and BWART NOT LIKE '' and SHKZG = 'S'.
               LOOP AT ZEKBE INTO ZEKBER.
                   TtlS = TtlS + ZEKBER-MENGE.
               ENDLOOP.
    *          ' Buliding Structure
               Struc-CHARG = ZEKBER-CHARG.
               Struc-RECV = TtlS.
               Ttl = TtlS.
               clear TtlS.
    *         Calcualting Credit transactions from PO History
             select * from EKBE into table ZEKBE where EBELN = PO_Doc and MATNR = ZEKPOR-MATNR and  EBELP = ZEKPOR-EBELP and BWART NOT LIKE '' and SHKZG = 'H'.
               LOOP AT ZEKBE INTO ZEKBER.
                   TtlH = TtlH + ZEKBER-MENGE.
               ENDLOOP.
    *          ' Buliding Structure
               Struc-REVR = TtlH.
    *          Calculating Total Delivered
               Ttl = Ttl - TtlH.
               clear TtlH.
    *          ' Buliding Structure
               Struc-DELV = Ttl.
               clear Ttl.
    *      Writtng ITAB
           APPEND Struc to BAGDS.
           ENDLOOP.
    *      Reading ITAB
    *       WRITE : / , 'ITAB Begin : '    .
    *       loop at  BAGDS into Struc.
    *         counter = counter + 1.
    *         write : /,'Serial : ',counter.
    *         write : / ,'PO : ',Struc-EBELN.
    *         write : / ,'Vendor : ',Struc-LIFNR.
    *         write : / ,'Vendor Name : ',Struc-NAME1.
    *         write : / ,'Material : ',Struc-MATNR.
    *         write : /,'Short Text: ',Struc-TXZ01.
    *         write : / ,'Model : ',Struc-MATKL.
    *         write : / ,'Model Desc : ',Struc-WGBEZ.
    *         write : /,'GPM : ',Struc-SUBMI.
    *         write : /,'Lot : ',Struc-CHARG.
    *         write : /,'Received : ',Struc-RECV.
    *         write : /,'Reversed : ',Struc-REVR.
    *         write : /,'Delivered : ',Struc-DELV,/,/,/.
    *       ENDLOOP.
    * Call ALV Grid Viewer
    *BREAK-POINT.
    gr_Table[] = BAGDS[].
       CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
            EXPORTING
                 I_STRUCTURE_NAME   = 'SBAGDS'
                 IT_FIELDCAT          = gt_fieldcat[]
            TABLES
                 T_OUTTAB                  = gr_Table.
    Please Advise
    Edited by: Sap Sap on Jul 27, 2009 12:18 PM
    Edited by: Sap Sap on Jul 27, 2009 12:22 PM
    Edited by: Sap Sap on Jul 27, 2009 12:22 PM

    Hi,
    The problem seems to be in your ALV grid display.
    The reason must be your field catalog.
    Just check your fieldcatalog.
    The value in the fieldname field of the fieldcatalog should be same as the fieldname in your internal table and should be in capital letters.
    Probably you must have mistyped some field.
    Kinldy check.
    Regards,
    Ankur Parab

  • For 2 Zfields in Web UI, BSP err: Field symbol has not yet been assigned.

    Hi,
    I've created 3 ZFields (F1, F2, F3) in EEWB. I've assigned F1 in the configuration of Component WB (available fields to displayed fields). I can see ZField F1 in the Web UI.
    But when i assign other 2 ZFields F2 & F3 in the configuration & check in Web UI, it showing the below error:
    "Field symbol has not yet been assigned."
    Anyone faced the similar issue, pls share the solution to fix this.
    tnx in adv.
    rgds,
    balu

    Hi there,
    I think the problem is with the cookie handling. Cookies are really just raw data that needs to be placed into ABAP structure. This is something like the way I would do it....
    Save Cookie
    DATA: cookie type xstring.
    EXPORT it_favourites FROM it_favourites TO DATA BUFFER cookie.
      CALL METHOD cl_bsp_server_side_cookie=>set_server_cookie
        EXPORTING
          name                  = sy-uname
          application_name      = application_name
          application_namespace = application_namespace
          username              = sy-uname
          session_id            = session_id
          data_name             = 'COOKIE_ID_43CASE2'
          data_value            = cookie
          expiry_date_rel       = 7
          expiry_time_rel       = 0.
    Retrieve cookie
      CALL METHOD cl_bsp_server_side_cookie=>get_server_cookie
        EXPORTING
          name                  = sy-uname
          application_name      = application_name
          application_namespace = application_namespace
          username              = sy-uname
          session_id            = session_id
          data_name             = 'COOKIE_ID_43CASE2'
        CHANGING
          data_value            = cookie.
      IF cookie IS NOT INITIAL.
        TRY.
            IMPORT it_favourites = it_favourites FROM DATA BUFFER cookie.
          CATCH cx_root INTO oref.
            " Error handling
        ENDTRY.
      ENDIF.
    Cheers
    Graham Robbo

  • RFC_ERROR_SYSTEM_FAILURE: Field symbol has not yet been assigned.

    I am on the newest patches for basically all things related to BI, and some of them are giving me trouble.  The problem I am now encountering is when I try to jump from my Purchasing Query to my Purchasing Line Items Query, I get an error, stating RFC_ERROR_SYSTEM_FAILURE: Field symbol has not yet been assigned.  Does anybody know what this means?  I haven't changed either query recently, and it was working just fine.
    Any help is appreciated.
    Thanks,
    Owen

    Hi
    Record a RSTT trace by refering to the note :  899572, and then execute the trace in RSTT.If will throw a dump and chekc where the issue is.It is difficult to say why the error has occured just from teh error "RFC_ERROR_SYSTEM_FAILURE: Field symbol has not yet been assigned."
    Regards, Hyma

  • How to revert back a SAP NOTE? Dump- Field symbol has not yet been assigned

    Hi Experts,
    We r getting dump(cause: Field symbol has not yet been assigned) in production for ABUMN tx, so, when debugged, it came to know that, the Field symbol is coming from REUSE_ALV_LIST_DISPLAY!!
    So, for some reason the system message text is not getting output in ALV-->Dump!!
    So, found a NOTE causing this problem!!
    So, pls. let me know that, How to revert back this/any SAP NOTE? pls. in detail steps wise!!
    thanq
    Edited by: Srinivas on Jan 24, 2008 4:32 PM

    Hi
    In SNOTE tcode,  select the Note that you implemented and click on 'RESET SAP Note Implementation'
    shylesh

  • GETWA_NOT_ASSIGNED - Field symbol has not yet been assigned.

    Hi Experts,
    I am facing the following dump u201CGETWA_NOT_ASSIGNED u201C, Termination occurred in the ABAP program "SAPLDSVAS_GRAPH" - in u201CSET_EXTREME_VALUES".The main program was "RDSMOP_MAIN ".
    In the source code you have the termination point in line 275 of the (Include) program "LDSVAS_GRAPHACI".
    Friends I am facing this issue while generating EWA report for R3 server only, Iu2019m able to generate EWA report for other servers like BI, CRM. But while creating EWA report for ERP server Iu2019m getting this dump.
    Certain thing I would like to highlight. Recently we did a support pack upgrade, mine is a Solman 7.0 EHP1 system. We update the support pack up to " SPS 6 ".Before the support pack upgrade it was working fine, I was able to generate the EWA report for all my servers.
    Do any body face similar kind of problem?
    Responses are highly appreciable
    Thanks & Regards
    Dusmanta

    Hi,
    Can you please debugg the same code from line 245 of include prog LDSVAS_GRAPHACI.
    do me->category_count times.       " I think the value of category count is zero.
            lv_index = sy-index + 1.
            write lv_index to lv_fieldname+15 left-justified.
            assign (lv_fieldname) to <lv_value>.
    Thanks
    Subhankar

  • Field symbol has not yet been defined-ALV Grid Display in Report

    Hi all,
              Iam calling a Function module for ALV grid display in Report programming. Its throwing the Error message Field Symbol has not yet defined. Can any one suggest what i have to do regarding it?

    Hi,
    <li> This is problem with fieldcatalog.
    <li> Check field names or table name in small letters in quotes while building fieldcatalog internal table
    <li> Check the fieldcatalog internal table , whether it has same fields as in data table which is shown using GRID_DISPLAY function module.
    Thanks
    Venkat.O

  • In t-code OBB8 - Short Dump "Field sysmbol has not yet been assigned"

    Hi All,
      While entering into the transaction OBB8, I am getting the dump "GETWA_NOT_ASSIGNED" "Field Symbol Not yet been assigned" in R/3 4.6c release. If anybody have idea about this please suggest ....
    Thanks in advance.
    Varsha.

    Hi,
    This dump is due to code corrections made through the SAP note 933848. To solve this dump, you should apply SAP Note 948961 first, and then apply the SAP Note 948967. Please take help of your ABAP Consultant to apply these SAP Notes. These notes can be accessed through service marketplace (www.service.sap.com).
    There is no functional reason assigned for the dump. Code correction is the way to resolve this.
    Hope this information helps you.

  • I have creat new apple id when i sign in 1st time this will say this apple id has not yet been used in itunes store? please help

    i have creat new apple id when i sign in 1st time this will say this apple id has not yet been used in itunes store? please help

    I changed my dads password, then went back to sync my apps and when it came to the Authorization, I entered his account name and the new password (which was by the way accepted and changed correctly) to have it come up on the screen as the incorrect password...REALLY!!! I went back and changed the password again...guess what? Same result "inncorect password".
    As I mentioned my dad PASSED AWAY, there is no way I can ask him what his password originally was, i can't accesses his email account as it no longer exists.
    What am I supposed to do, this is very frustrating.
    If I use my new account that's in my name, the Authorization screen just keeps asking for my Dads account.

  • While trying to upgrade to mavericks I received the following error during download "OS 10.9 has not yet been approved for software upgrade. Thanks! -SWN IT"

    Hello,  I am trying to upgrade an iMac to Mavericks. At the end of the download phase, a message pops up that says
    "OS 10.9 has not yet been approved for software upgrade. Thanks! - SWN IT" 
    The download stops, and I cannot resume. Made several attempts to start the process of downloading again and receive the same message/error.
    I am not familiar with any software that has the intials SWN or have SWN in the title. 
    Does this error look familiar to anyone? 
    Any clues as to how to find out the what application could be sending this message would be greatly apprciated.

    Is this on a Mac that belongs to a company or did you buy it used?

  • Run time error while saving sales order

    Hi all,
    i am working on IDES ECC 6.0, when i am saving an sales order(OR) i am getting run time error in the table CRMPAROLTP, program SAPMV45A.
    i am using 4 GB RAM, still having a space of 30 GB for only IDES to save the data.
    so, how to solve it.

    Hello,
    I doubt the runtime error (I am assuming you mean that you got a short dump) you mentioned in your original post has anything to do with the warning messages you see when doing a check (Ctrl+F2) on table CRMPAROLTP and program SAPMV45A.  These warnings should not cause a short dump or runtime error.
    The warning message for the table has the following long text:
    Table CRMPAROLTP: Key length > 120 (Restricted functionality)
    Message no. DT214
    Diagnosis
    The key length, i.e. the sum of the field lengths of all the key fields of the table, is more than 120 bytes.
    System response
    This is a warning.
    Procedure
    Note the following restricted fuctionality for this table:
    - Table contents cannot be transported by specifying key values, at
      best by specifying generic key values with a maximum length of 120
      bytes.
    - The table may not be used as the base table of a lock object.
    The warnings in SE38 for program SAPMV45A are mostly related to Unicode and have no reference to the table CRMPAROLTP.
    If you haven't already done so, please check the SAP Note referenced in my first reply since this does provide a solution for short dumps related to table CRMPAROLTP.
    Of course, since I don't know specifically what the short dump message is that you received, I could be basing my assessment on false assumptions.  If you have those details it is better for the SDN community as a whole if you include the information in this thread instead of sending it to me offline.
    Best Regards,
    Jamie

  • Run time error while saving values in File (Tcode)

    Hi,
    I am using FM   call function 'FILE_GET_NAME'
           exporting
                logical_filename = logical_filename
                parameter_1      = program_name
                parameter_2      = file_id_param
           importing
                file_name        = physical_filename
           exceptions
                file_not_found   = 1
                others           = 2.
    for this I am trying to maintain dynamic values(field symbols) in Tcode FILE Logical file name definition , physical path as.
    Physical file   =<PARAM_1>.<PARAM_2>
    But while saving it dumps, saying filed symbol assinment to substring is not allowed.
    Physical path for the same is /<V=Z_DIR_MAIN>/<SYSID>/<V=Z_DIR_OUT>/<FILENAME>.<CLIENT>.<DATE><TIME>.
    Regards
    Mohinder Singh Chauhan

    Hello Mohinder,
    the better way to analyse these kind of things is by entering the function module in se37 and providing the required test data.
    In your scenarion as you say its throwing a runtime dump related to field symbols better you concatenate the data param1 and param2 into a new variable and then pass that value into the function module.
    Thanks,
    M.Naveen kumar

  • Run time error while saving migo

    Dear All,
    I am doing the subcontracting process. and while saving the MIGO it shows Runtime Error.
    Error analysis
        Short text of error message:
        No taxes on sales/purch.are allowed for account 428304 BS70, V0 is not a
        llowed
        Technical information about the message:
        Message classe...... "FS"
        Number.............. 217
        Variable 1.......... 428304
        Variable 2.......... "BS70"
        Variable 3.......... "V0"
        Variable 4.......... " "
    Trigger Location of Runtime Error
        Program                                 SAPLMBWL
        Include                                 LMBWLU21
        Row                                     59
        Module type                             (FUNCTION)
        Module Name                             MB_POST_GOODS_MOVEMENT
    BS70 is a company code.
    Please help me out.
    Thanks & Regards,
    Sandeep Patil.

    Dear All,
    i have done that but now another error is coming as
    Error analysis
        Short text of error message:
        Balance in transaction currency
        Technical information about the message:
        Message classe...... "F5"
        Number.............. 702
        Variable 1.......... 00
        Variable 2.......... " 5.000,000"
        Variable 3.......... "INR"
        Variable 4.......... " "
    5.000,000 is my po value.
    Thanks & Regards,
    Sandeep.

  • Run time error while saving the production order in CO02

    HI Experts,
    While i am releasing and saving the production order the system is giving the runtime error. Please help.
    Runtime Errors         UNCAUGHT_EXCEPTION
    Exception              CX_SLD_API_EXCEPTION
    Error analysis is
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SLD_API_EXCEPTION', was not
    caught in
    procedure "GET_ACCESS_DATA" "(METHOD)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Internal error in method
    A Quick response is required.
    Regards
    Dinakar Sarma

    Hi,
    Please check below  link for your issue , it may useful
    http://forums.sdn.sap.com/thread.jspa?messageID=10815298#10815298
    Regards,
    Ram

Maybe you are looking for

  • Applying patches to PI 7.0 SP6

    Hi Experts I am totally new to this XI technical side so please help me out in a step by step way. Actually we are trying to install XI 7.0 and the initial installation like from the master installation DVD and the exports and all are complete. So th

  • Passing variable into url

    Am sure am missing something but why doesnt this work??? If I hardcode the string value it works fine... <cfset Str_Order =#rsorder.order_id#> <cfoutput> #Str_Order# </cfoutput> <p><a href="MyAccount.cfm?view=customsinvoice&OrderID=' #Str_Order# ' ">

  • Powershell: How to colorize cells or entire row

    Hi,  I have a little question: Goal: Colorize cells or row only on certains values for multiple tables.  i.e. Table 1: colorize red all cells in column "xx" with values >10 ; Table 2: colorize green all cells in column "xx" with values <5  ecc Proble

  • Cant import iphoto library

    Hi - i seemto be unable to import my iphoto library. I select choose in my iphoto library (which is on my external drive) but then nothing happens :-s Could anybody suggest what may be going on? thanks for your help

  • [CS4] Control Panel swatch pop-up

    Although the problem of the non-sticking list view in the Swatches Panel, introduced in CS3, has been fixed, it persists in the Control Panel's pop-ups. Set them to list view and the next time Illustrator is launched they're back as thumbnails. Micha