Run Web Layout in Reports Developer not working properly
I created a simple tabular report on hr.employees. It runs fine for the "Run Paper Layout" button. When I click "Run Web Layout" I get an IE browser window with the following:
404 Not Found
OracleJSP: java.io.FileNotFoundException:
Set the init-param debug_mode to "true" to see the complete exception message.
I do not know where to 'Set the init-param debug_mode to "true"'
I'm using windows XP
My "home" for the 10g Developer Suite is I:\DevSuite10g
My "home" for the 10g Rel2 database is I:\oracle\product\10.2.0\
I can navigate to http://mycomputer:8890/reports/rwservlet and see the
"OracleAS Reports Services - Servlet Command Help" webpage
I'm not using Oracle Application Server software.
Please Advise........Mark
Sure, here is the note.
Subject: Running JSP Report in Builder returns: Error: 404 Not Found Oraclejsp: Java.Io.Filenotfoundexception
Doc ID: 372624.1 Type: PROBLEM
Modified Date : 07-JUN-2006 Status: MODERATED
In this Document
Symptoms
Cause
Solution
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
Applies to: Oracle Reports Developer - Version: 10.1.2.0.2
This problem can occur on any platform.
Symptomso The loss of functionality
Cannot test jsp using Run to Web Layout button.
o The sequence of events
Open a report in builder.
Click on Run to Web Layout.
Browser shows 404 error.
o The significance of loss
Cannot test reports in builder.
o Include specific error messages (error number with syntax)
404 Not Found
OracleJSP: java.io.FileNotFoundException:
Set the initialization parameter in debug_mode to "true" to query the complete exception message.</HT
o What IS working
Paper layout reports work.
CauseA space in the name caused the URL call for the jsp not to be valid.
When the URL is generated, the space is treated as the need for a new parameter.
EXAMPLE
JSP name: 'my test.jsp'
Builds the following URL:
http://server:3000%2Fmy+test000203332.jsp?frombuilder=yes&validatetag=yes&JSPRUN=Yes
While the following name without a space produces a good URL
JSP name: 'myname.jsp'
http://server:3000%2Fmyname000203332.jsp?frombuilder=yes&validatetag=yes&JSPRUN=Yes
Note that the '+' is not in the good URL.
SolutionTo implement the solution, please execute the following steps:
1. Rename you report from my test.jsp' (with space) to 'mytest.jsp' (no space)
Similar Messages
-
Incompatibility for custom Report is not working properly
Hi Gurus,
Need your help to diagnose the issue here.
The problem here is as under
We have a custom report CP1 which fills a table T1 during the process (table is truncated in the begining of the procedure). This CP1 is set incompatible to itself so that table architecture will work properly.
but the problen here is the next run starts ( 2sec, 5 secs or 10 secs) prior to the actual completion of the last run.
the data is as
CONCURRENT_ REQUEST ACTUAL_START ACTUAL_COMPLETION_
PROGRAM_ID ID DATE DATE
138361 3033673 7/3/2012 10:31:46 AM 7/3/2012 10:57:13 AM
138361 3033671 7/3/2012 10:28:47 AM 7/3/2012 10:31:42 AM
138361 3033670 7/3/2012 10:25:22 AM 7/3/2012 10:28:48 AM
138361 3033669 7/2/2012 7:07:21 PM 7/3/2012 10:25:37 AM
138361 3033665 7/2/2012 7:05:10 PM 7/2/2012 7:07:15 PM
here as you see the req 3033670 starts @7/3/2012 10:25:22 AM whereas the req 3033669 ends at 7/3/2012 10:25:37 AM (though we have terminated the 3033669 ) similarly for 3033670 and 3033671.
the following query is giving 1 row
select * from FND_CONCURRENT_PROGRAM_SERIAL
where RUNNING_CONCURRENT_PROGRAM_ID = 138361 is
We have bounced the CM after setting the incompatibility as per the
Setting up Incompatibility Rules for Custom Reports [ID 107224.1] suggested by Hussein on this forum.
This is happening on our prod env. kindly suggest something.
We are on 12.1.1 (r12).
Thanks
-Shivdeep Singh
Edited by: user1054040 on Jul 2, 2012 10:58 PMHi Srini,
We have raised a SR with oracle for this it seems to be a bug in 12.1.1 release I will update the same once I got any fix or patch from oracle.
from the intial investigation it seems to be that the imcompatibility wit itself feature is not working as expected.
Also this is the latest case
CONCURRENT_
PROGRAM_ID REQUEST_ID ACTUAL_START_DATE ACTUAL_COMPLETION_DATE COMPLETION_TEXT
150364 3036174 7/3/2012 4:55:03 PM 7/3/2012 4:57:04 PM Normal completion
150364 3036178 7/3/2012 4:55:57 PM 7/3/2012 4:57:47 PM Normal completion
150364 3036181 7/3/2012 4:57:27 PM 7/3/2012 4:58:09 PM Normal completion
the request id 3036178 should have been started after the completion of 3036174 ie after 7/3/2012 4:57:04 PM but it actually starts 7/3/2012 4:55:57 PM
hope this give the better understanding for the scenario here.
Thanks
-Shivdeep Singh
Edited by: user1054040 on Jul 4, 2012 11:36 PM -
Report navigation not working properly for the union report
i have a report which is union and i need to navigate to another report(detailed).the filters are not carried out to the detailed report .Please suggest me on how to get the filters ar e correctly applied on detailed report.I have prompted the fileds in the detailed report.
Hi,
Please refer to the below thread.
Re: OBIEE-UNION Request navigate is not working (Parameter value is not passed)
Hope it helps!
Thansk -
Application deployment and reporting does not work properly
Hello
I have a network and i management that with sccm 2012 cu2
Just have a problem with sccm
Sccm dosenot show corect data for collection or reporting such as all windows sevens
However self service portal doesnot work properly and for install program wants administrator privilage for users
Sql is 2008r2 cu6What is displayed and where? What was expected?
Torsten Meringer | http://www.mssccmfaq.de -
Report Navigation not working properly
I have a scenario where in i need to provide navigation on a column so that when clicked it should get the detail report corresponding to the value I click on.
Lets say, I have a static filter abc in the detail report as well as summary report.
When I run the detail report individually on a dashboard page, I am able to see the filter abc in the filter list below the report.
But when I navigate from the summary report, this filter is missing in the filter list as well as in the physical query.
As a result of this the records which have to be filtered on this filter "abc" are not getting filtered.
Can you please help in this.
Thanks,
SwethaDavid, I think that will show the user No Results when navigating from the summary report unless he clicks 'abc'.
To the OP, I think you should have 1 filter, unprotected, set to 'abc'. That way when you go to the report directly, it is filtered to 'abc'. But if you navigate to it from the summary report, you it will get filtered to whatever you clicked, 'abc', 'xyz', etc.
If that isn't working, I would check your column formula in the summary report and the target report and make sure they are the same. -
Web reporting does not work in BW system
Hi-
I'm a BW consultant with very little BASIS knowledge and have been asked to look into why web reporting is not working on our system.
We get the following message when trying to run BW queries on the web:
Not found
The following error occured:
%3cpre%3e%0aLOCATION+++MessageServeronhosttongue%0aERROR+++++Grouptonguenotfound%0a%0aTIME+++++++TueMar2004%3a21%3a132007%0aRELEASE+++640%0aCOMPONENT+LG%0aVERSION+++5%0aRC++++++++-6%0aMODULE++++lgxx_mt%2ec%0aLINE++++++3518%0aDETAIL++++LgIGroup%0aCOUNTER++++10%0a%3c%2fpre%3e
I've checked SICF and all services are activated. I suspect that the problem is in the RZ10 parameters, but do not know what needs to be set there. Here are our settings:
rdisp/max_wprun_time 3600
abap/cache_area 10000000
abap/buffersize 1500000
login/system_client 100
INSTANCE_NAME DVEBMGS00
SAPSYSTEM 00
rdisp/wp_no_dia 10
rdisp/wp_no_btc 6
rdisp/wp_no_vb 2
rdisp/wp_no_vb2 1
rdisp/wp_no_enq 1
rdisp/wp_no_spo 1
DIR_TRANS /usr/sap/trans
ms/server_port_<xx> PROT=HTTP, PORT=8080
icm/server_port_0 PROT=HTTP,PORT=8080,EXTBIND=1
DIR_ORAHOME /oracle/BWD/920_64
ipc/shm_psize_10 104000000
ipc/shm_psize_14 0
ipc/shm_psize_18 0
ipc/shm_psize_19 0
ipc/shm_psize_30 0
ipc/shm_psize_40 114000000
ipc/shm_psize_41 0
Is there anything obvious missing?
Thanks,
TristanFollowing seems a little odd....
ms/server_port_<xx> PROT=HTTP, PORT=8080
I would expect something like:-
ms/server_port_0 = PROT=HTTP,PORT=8102 (or other relevent port number) -
Reports Builder 9i when you click Run web Layout error
Hi,
After creation of a new report within the reports builder 9i and then click Run web layout I got the following error: Failed to locate the browser.
Please help,
Dutchthe browsers are not properly set to your report builder
check these registry settings
HKEY_USERS\S-1-...\Software\ORACLE\Toolkit\TKBrowser\BrowserName and
HKEY_USERS\S-1-...\Software\ORACLE\Toolkit\TKBrowser\Browserpath -
Run Web Layout Error 11g R2 Report
Report Builder 11.1.2.0.0
When button pressed on Run Web Layout in Oracle Report Builder then
It's show Error:-
java.lang.NoClassDefFoundError:
javax/servlet/tagext/tagLibraryInfo
Installed proucts are:-
Weblogic Server 10.3.6
SE JDK 6U35 64bit
Oracle 11g R2 (Forms & Reports )
Please give adviceHave you checked out {thread:id=2418100} ?
Cheers, -
.jar file is not working properly :developed in NETBEANS
Hi Gurus,
i am using NETBEANS IDE 7.2.
i am developing a project that interacts with databases 10g and COM ports of machine , these all processes are performed by .bat file which i am trying to run from jFramform , code works perfectly .bat file is also called perfectly when i run the project using F6 from the NETBEANS, for testing i placed some dialogue boxes on the form to test it ,
but when i run executable .jar file , form run successfully and dialogue box works perfectly but .bat file is not called by executable .jar file.
this is how i call the .bat file...
String filePath = "D:/pms/Libraries/portlib.bat";
try {
Process p = Runtime.getRuntime().exec(filePath);
} catch (Exception e) {
e.printStackTrace();
and below is the contents of portlib.bat file
java -jar "D:\SMS\SMS\dist\SMS.jar"
you must probably ask why i am calling a .jar file using .bat file .
reason is that this .jar project sends message using GSM mobile , System.exit(); is compulsory to complete a job and then do the next one ,
if i use the same file to execute this job it makes exit to entire the application (hope you can understand my logic).
that's why i use extra .jar file in .bat file , when single job is completed .bat exits itself and new command is given.
Problem is that code is working perfectly in NETBEANS when i run the project but when i run .jar then .bat file is not working ,
thanks.Thanks Sir ,
You need to first test an example that works like the one in the article.
There are plenty of other examples on the web - find one you like:
http://javapapers.com/core-java/os-processes-using-java-processbuilder/
I tried this one.
try {
ProcessBuilder dirProcess = new ProcessBuilder("D:/SMS/SMS/Send_message.bat");
File commands = new File("D:/SMS/SMS/Send_message.bat");
File dirOut = new File("C:/process/out.txt");
File dirErr = new File("C:/process/err.txt");
dirProcess.redirectInput(commands);
dirProcess.redirectOutput(dirOut);
dirProcess.redirectError(dirErr);
dirProcess.start();
} catch (IOException ex) {
Logger.getLogger(mainform.class.getName()).log(Level.SEVERE, null, ex);
as instructed in the article i compiled both the projects at same version or sources and libraries which is 1.7
here is my version details
C:\>javac -version
javac 1.7.0_07
C:\>java -version
java version "1.7.0_07"
Java(TM) SE Runtime Environment (build 1.7.0_07-b11)
Java HotSpot(TM) Client VM (build 23.3-b01, mixed mode, sharing)
inside the NETBEANS IDE c:\process\err.txt remains empty and code works perfectly , but when I run executable .jar file( by double clicking on that file in dist directry) then c:\process\err.txt becomes full with this error text and there is no response from calling D:\SMS\SMS\send_message.bat
here is the error text
java.lang.UnsupportedClassVersionError: sms/SMSMAIN (Unsupported major.minor version 51.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
Exception in thread "main"
here is /SMS/SMS
unknown source ? -
Active Report Viewer not working in Internet Explorer 10
We have many legacy applications developed using ASP and VB(InterDev). Our organisation is moving to use Internet Explorer 10 in the near future.
We had a IE10 compatibility testing for our legacy applications and we observed that the applications using Active Report Viewer to generate the reports are not working. Applications works perfectly fine with the older version of Internet Explorer.
We looked for the various workarounds but we did not succeed.
Some application does nothing when we click on a button to generate the report but some applications throws the below error:
"ActiveX
control failed to load! -- This control is required to use the Address Book and Attachment features. Please check your browser security settings and/or contact PC Support to install the digitally signed control."
We will be glad if we get any assistance on this issue.We have many legacy applications developed using ASP and VB(InterDev). Our organisation is moving to use Internet Explorer 10 in the near future.
We had a IE10 compatibility testing for our legacy applications and we observed that the applications using Active Report Viewer to generate the reports are not working. Applications works perfectly fine with the older version of Internet Explorer.
We looked for the various workarounds but we did not succeed.
Some application does nothing when we click on a button to generate the report but some applications throws the below error:
"ActiveX control failed to load! -- This control is required to use the
Address Book and Attachment features. Please check your browser security settings and/or contact PC Support to install the digitally signed control."
We will be glad if we get any assistance on this issue.
Hi,
There is a more dedicated forum for web development issues
https://forums.asp.net , I would recommend you post this issue in that forum to get more dedicated supports.
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi all,
I'm having problems running a simple test report on Reports Builder 9.0.2.
I've created a report based on an Html file saved from Excel, as in the "Output to Excel with Oracle9i Report" from the "Getting Started with Oracle9i Reports" demonstrations.
When I click on "Run Web Layout" Reports Builder hangs and never unlocks any more.
The trace log just states the following:
LOG :
Rapporto: test6
Collegato al server: ITTOF066.TORINO.IT.INT.ATOSORIGIN.COM
Nome utente: joelusr
Here's the jsp code:
<%@ taglib uri="/WEB-INF/lib/reports_tld.jar" prefix="rw" %>
<%@ page language="java" import="java.io.*" errorPage="/rwerror.jsp" session="false" %>
<%@ page contentType="text/html;charset=ISO-8859-1" %>
<rw:report id="report">
<rw:objects id="objects">
<?xml version="1.0" encoding="WINDOWS-1252" ?>
<report name="test6" DTDVersion="9.0.2.0.0">
<xmlSettings xmlTag="TEST6" xmlPrologType="text">
<![CDATA[<?xml version="1.0" encoding="&Encoding"?>]]>
</xmlSettings>
<data>
<dataSource name="Q_STUDY">
<select>
<![CDATA[select study_code "f_study_code", title "f_title"
from Joel_study]]>
</select>
<displayInfo x="0.88538" y="0.93750" width="0.69995" height="0.19995"/>
<group name="G_study">
<displayInfo x="0.56116" y="1.63745" width="1.34839" height="0.60156"
/>
<dataItem name="f_study_code" datatype="vchar2" columnOrder="11"
width="16" defaultWidth="100000" defaultHeight="10000">
<dataDescriptor expression="study_code"
descriptiveExpression="f_study_code" order="1" width="16"/>
</dataItem>
<dataItem name="f_title" datatype="vchar2" columnOrder="12"
width="512" defaultWidth="100000" defaultHeight="10000">
<dataDescriptor expression="title" descriptiveExpression="f_title"
order="2" width="512"/>
</dataItem>
</group>
</dataSource>
</data>
<reportPrivate templateName="rwbeige"/>
</report>
</rw:objects>
<html>
<head>
</head>
<body>
<h1>TEST6</h1>
<table>
<tr>
<td>Study_code</td>
<td>Title</td>
</tr>
<rw:foreach id="gStudyId" src="G_STUDY">
<tr>
<td><rw:field id="fStudyCodeId" src="f_study_code" /></td>
<td><rw:field id="fTitleId" src="f_title" /></td>
</tr>
</rw:foreach>
</table>
</body>
</html>
</rw:report>
And here's the query Sql:
select study_code "f_study_code", title "f_title"
from Joel_study
Any hints? I've followed the demo step-by-step so I just don't have any idea about what could be wrong.
TIA
AndreaHi,
it was not a hardware problem. I resolved it by installing 9iDS in English only, excluding all other languages.
Andre -
Crystal reports 2008 not working on 64 bit OS
Hello Everybody,
I have developed crystal reports in CR2008. My development environment is 32 bit OS with visual studio 2005 and it is working fine. When I deployed this applciation into 64 bit OS,application is working fine,but reports are not working/displaying.
Thanks
RamI moved your post to the .NET - SAP Crystal Reports forum. You'd never have gotten an answer on the CR Design forum
More info needed:
Exact version of CR (Help | About)?
Web or win app?
More details on:
reports are not working/displaying
Errors? Do you get the viewer? Or just an empty form?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup -
Discoverer Reports does not work in Multi-org Environment after R12 Upgrade
Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
SELECT po_header_id, segment1, type_lookup_code
FROM po_headers
WHERE segment1 = '5000002'
Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
EXEC mo_global.set_policy_context('S',129)
But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
===========
I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
Please suggest. Appreciate your response.
Thanks,
Kesava ChunduriHi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava -
Extraction and Reporting is not working in BI SYSTEM
Hi,
The BI developement r shows error an License Expire.Currently i change the system date and working fine. If changing the system date modeling part is working fine. But extraction and Reporting is not working. please help me to solve this problem.HI,
If the license is expired then appky for the permanent license from Service market place and install it in the system through SLICENSE TCode. For this you need to have S-user ID to access service market place to apply for license.
Regards,
Sharath -
Oracle 9iAS R2 - reports are not working - JSP Error
dear All
We are having issue in our Oracle 9i AS R2, the reports are not working, this thing happend suddenly , while runing any report the following messages are coming
==============
500 Internal Server Error
OracleJSP:
JSP Error:
Request URI:/repdemo/examples/Tools/test.jsp
Exception:
org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
at com.inprise.vbroker.ProtocolEngine.PortfolioImpl.getConnector(PortfolioImpl.java:79)
at com.inprise.vbroker.ProtocolEngine.ManagerImpl.getConnector(ManagerImpl.java:147)
at com.inprise.vbroker.orb.DelegateImpl._bind(DelegateImpl.java:196)
at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java:365)
at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java:493)
at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java:356)
at oracle.reports.engine._EngineReportStub.doneReport(_EngineReportStub.java:36)
at oracle.reports.definition.RWJspProxy.doneReport(RWJspProxy.java:261)
at oracle.reports.definition.RWReport.done(RWReport.java:1087)
at oracle.reports.jsp.ReportTag.release(ReportTag.java:398)
at oracle.jsp.runtime.OracleJspRuntime.releaseTagHandler0(OracleJspRuntime.java:1109)
at oracle.jsp.runtime.OracleJspRuntime.extraHandlePCFinally(OracleJspRuntime.java:1213)
at examples.tools._test._jspService(_test.java:292)
[SRC:/examples/Tools/test.jsp]
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
-=================
please help to resolve this issue.
thanks in advance.
regardsDear All
Just to share the solution of the problem.
We restarted the XServer which is on the other machine then Oracle 9i AS Middle Tiere and Infra. Once we restarted the XServer machine, and restarted the reports server , every thing back to normal.
regards
Maybe you are looking for
-
I have just upgraded my iphone 4 to version 4.3.3. The upgrade was successful but I cannot use anymore those applications (e.g. facebook, google) which I downloaded from the Appstore. I tap on an app, I can see it opens itself but the screen changes
-
I'd like to create a complete text editor so, i made these two code, but the first it's based on jtextpane and the second on a jeditorpane. I want to link toghether the second with the firt code , to have a cpmplete text editor. The problem is that i
-
My itunes library has more songs than my ipod will hold.
My itunes library has more songs than my ipod will hold. What is the best way for me to choose what actually goes on the ipod?
-
InDesign CS5: Zombie panels
I've had this problem with CS4 but it seems much more persistent (and annoying) in CS5: Panels that insist on reappearing whenever you switch workspaces, no matter how many times you close them. The panels that appear are library panels and the Sampl
-
How to automatic complete workflow after 3 weeks ago ?
Hi all, I have one problem about workflow in SAP. I have the workflow that have one agent to assigned. How can I setup workflow to automatic complete if agent don't process task within 3 weeks ?