Running Aging reports based on Document date in 2007

Hi All,
I have an issue while running the Receivables aging report in the 2007 version. The customer usually runs the reports based on the document date. Document date holds more importance in their case.
However, in the 2007 version, the aging report is totally governed by the posting date. For example, if I change the aging date, the posting date also changes to the aging date and viceversa. If I want to change the aging date to 01/31/09, the posting date u2018Tou2019 automatically changes to 01/31/09 and when we run the report, it will bring in all transactions until the posting date of 01/31/09.
But, the requirement is to leave the posting date as blank and give the document date u2018Tou2019 01/31/09. This will then pull all transactions until the document date of 01/31/09 irrespective of the posting date.
As a result, when you run the balance sheet with the document date of 01/31/09, receivables show a different balance. This discrepancy is due to the fact that AR Receivable aging report forces to keep the Aging date = Posting date.
This was not the case in SAP 2005 version where we were allowed to key in the aging date and the document date to get results based on document date.
This is very critical as they have recently upgraded from 2005 to 2007 and they are unable to reconcile the balances out of Balance sheet and Aging.
Please advise.
Thanks,
Payal

Hi Jitin,
We tried that as well but no luck. There is still a discrepency between what the aging shows and what the BS shows. When we put the Aging date as 01/31/09 and Document date as 01/3109, the posting date 'To' is automatically filled with 01/31/09, so it basically searches for all transactions with the posting date 01/31/09 and document date 01/31/09. This is not the requirement as we do not want to consider the posting date at all while running the aging.
I also have some screenshots if I can share. I am not sure if I should report this to SAP for further investigation or am I missing something here.
Thanks for your help.
Regards,
Payal
Edited by: Rui Pereira on May 1, 2009 10:48 AM

Similar Messages

R12: How to filter Open Item Revaluation Report based on GL Date

Hi,
Anybody know how to filter Open Item Revaluation Report based on GL Date from and GL Date to in R12?
Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
We need to run the report only for specific date only. Please share with me if anyone know about this.
Thanks.

Pl do not post duplicates - R12: How to filter Open Item Revaluation Report based on GL Date

R12: How to filter AP and PO Accrual Reconciliation Report based on GL Date

Hi,
Anybody know how to filter AP and PO Accrual Reconciliation Report based on GL Date from and GL Date to in R12?
Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
We need to run the report only for specific date only. Please share with me if anyone know about this.
Thanks.

In 12 you can rebuild and run the report for a particular period, but not a single day if that's what's required

T-code or SAP Table Sales report based on Document Pricing Procedure

Hi Experts,
Please suggest me some SAP Standard T-code or Sales Report based on Document Pricing Procedure and Sales Area.
Or suggest me SAP Table for the above mentioned combination. Thanks in advance.
With Best Regards,
Bharat B

Hi
There is no standard t code available. You have to go for Zee using the below tables
first you need to get the VBAK-KALSM(Pricing procedure)or VBRK-KALSM next you have to pass the VBAK-KALSM to table T683V-KALSM(field) now you will get all the Document Pricing Procedures (KALVG) assigned to these pricing procedures along with sales area.
So using these tables you can get the required data.
regards
Prashanth
Edited by: Prashanth@SD on Jan 18, 2011 7:58 AM

Authorizations for WEBI report based on BPC data model

Hi All,
We are strugelling with setting up authorisations for the reporting on BPC data model.
We created Bex query on top of Multiprovider that consists of BPC cube. The Bex query is source for WEBI output. The authorisations has been set up on BPC data model (cube) in BPC application but they are not passed nor to Bex query nor to Webi. Example: The query is build on top of OPEX BPC data model, this data model is restricted based on Oranizational Unit. My test user is allowed to see only Org Unit = 'Australia' in the OPEX BPC data model, however when I'm running the report I can see absolutely everything.
We are not connecting/using any BI cubes itself for this reporting. We are intrested only in the WEBI report based on BPC data models.
We were trying to use BPC data model (without any extra settings) as the source for BEx report, we were also trying to use virtual BPC data model as the source for Bex transient query - but non of these have helped.
Can you please advise how the authorisations should be set up for WEBI reporting on BPC data models?
Kasia

Anybody can help with this issue please?

Inventory Report Based On Posting Date

Hai All
Can any one help me with the subject "Inventory Report Based On Posting Date"
Please
with regards
Shankar

hi,
Visit this link,already answered.
Difference between posting & system date in Inventory Audit Report
Jeyakanthan

Filtering an EVDRE report based on a Data Value

Everyone,
I have a report that has accounts in the columns without expansion. I am capturing various status codes in one account and I need to know how to filter the report based on a data value that is retrieved from the database for this account.I am also using the EVdre sort functionality along with an EVSUB in the after range which sub totals the Organization and Materials Dimensions in the rows. When I try to use native Excel to filter based on the value of the Status Code Account the report will only sort the top section of the report. As soon as it hits the Subtotals it stops filtering. Is there a way to filter the report in EVDRE based on the data value that is returned from the database.
The account that I want to filter on is Status Code. We can have two values in it either 10 = Submitted or 30 = Business Case. The users want to be able to filter the report to only show the status code of 10 (Submitted) for their Executives to review.
Edited by: eleasha counts on Aug 3, 2011 12:22 PM

Hi eleasha,
I don't know if you will entertain FORMATRANGE.
But you can use formatrange to hide those rows you donot want to see.
You can use the CRITERIA as VALUE=<<anyvalue>> you want to verify and apply it on rows.
You can set the PARAMETER value as ROWHEIGHT=0, and apply to ALL.
Try this with the combinations you need to see.
Hope this helps.
Karthik AJ

Need Report based on "CUSTOM DATA field @ Shop Order Maintenance"

Need the REPORT based on CUSTOM DATA field.
Requirement - I am having the CUSTOM data at Shop Order Maintenance that is called as XXX, I need some report in SAP ME which can display the SFC related to particular Shop order based on XXX Number.

Hi!
As far as I remember there is no such base report. So, you may try to create it using SDK or request it as custom enhancement from SAP.
If you want to create it using SDK, you can find the required data for report in CUSTOM_FIELDS table.
Regards,
Alex.

Creating report based on master data

Hi Guys,
I want to create a specific report based on master data in BI cube. for example... a report which takes cost center and period as variable and display expenses for that period and cost center. This report I want to create for all cost center in BI database separately. any idea how can we do this?
There are 2000 cost centers and I need to print/send 2000 reports one for every cost center.
If I store all cost center in excel file, can it be easier?
broadcasting and creating 2000 schedule - not option.
Thanks..SM

Hi stuti misra,
Create ONE Query with selection Cost Center and Period are inputs.
Create text variables for Cost Center and Period and add in Query Description.
After query execution you can see description based on selection in workbook or webtemplate.
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

Create report based on JSON data

Dear All,
I'm on Oracle APEX 4.1 and Oracle 11g. I'm receiving JSON data in my application and would like to print report based on JSON data without storing it in any table.
Can you please suggest best way to achieve it?
Regards,
Chintan

Hi,
in 4.1 you can for example use the open source PL/JSON library (http://sourceforge.net/projects/pljson/) to parse JSON.
In APEX 5.0, we currently plan to add a JSON API package that e.g. can be used to convert JSON to XML. Here is an example:
SQL> select col1, col2
2 from xmltable (
3      '/json/row'
4      passing apex_json.parse('[{"col1": 1, "col2": "hello"},{"col1": 2, "col2": "world"}]')
5      columns
6          col1 number path '/row/col1',
7          col2 varchar2(5) path '/row/col2' );
                COL1 COL2
                   1 hello
                   2 world
At the last OOW, it was also announced that the RDBMS will provide native support. That should be the preferred option in the future.
Regards,
Christian

Age Calc based upon b'date

I'm seeking a Current Age calc based upon B'date and a set date in the future (5-5-2012) for a registration form. I have zero Java or FormCalc background. Many thanks for any assistance.

If you don't much response in the LiveCycle Forms forum you posted to, you might try the more active and equally appropriate one here: http://forums.adobe.com/community/livecycle/livecycle_es/livecycle_designer_es

Ar Aging Report based on transaction lines

Hi all,
I am trying to write a query to calculate aging report at line level. The user needs a query which calculates the aging value at at line level because the ra_customer_trx_lines_all has attribute1 populated with a value from (A,B,C,D).I need get the aging value for each group(attribute).
select sum(nvl(lines.line_recoverable,0)+nvl(adj.adj_amt,0)-nvl(rec.rec_amt,0)),lines.attribute1
from ra_customer_trx_lines_all lines,
(select CUSTOMER_TRX_LINE_ID trx_line,
sum(amount) adj_amt
from ar_adjustments_all
where status = 'A'
group by CUSTOMER_TRX_LINE_ID) adj
,(select REF_CUSTOMER_TRX_LINE_ID trx_line,
sum(nvl(amount_cr,0))-sum(nvl(amount_dr,0)) rec_amt
from ar_distributions_all
where source_table='RA'
and source_type='REC'
group by ref_customer_trx_line_id) rec
where lines.CUSTOMER_TRX_LINE_ID=adj.trx_line(+)
and lines.CUSTOMER_TRX_LINE_ID=rec.trx_line(+)
and lines.customer_trx_line_id in ('18293')
group by lines.attribute1
Also I dint yet add the as of date parameter.I suppose the tables have to change in that case.Can any one help me with that tooo.
The above query kinda generated the value I was looking for.But when I ran the query for just a few more lines included.The query took forever to run.
Can you please help me on this ASAP.
Thanks for all your tips in advance.
Mach
Edited by: krismach_85 on Oct 27, 2009 8:38 AM

Hi,
You can run the Transaction Register report for specific Transaction reason/ a range and see the related material transactions.
Karthik.

Report Based on XML Data Template is timing out

Hi there,
i have an XML publisher report based on an XML data template that i've written. The report is working fine except when there is huge data that is supposed to come out, its timing out. Ive set the db_fetch_size parameter to 20 and scalable_mode to on but its still timing out.
If anyone has a solutiom or a thought it would be much appreciated.
Thanks.

Thanks for the reply.
Well when i'm opening the report , i wait for about 15 seconds then 'Page Cannot be Displayed' appears on my browser. I'm having this case only when i'm expecting huge data. By huge data i mean that the report gets informations about a deal, when the deal has 10 categories the report runs fine, but when i add all catgories, about 1000, it gives me the 'Page cannot be displayed' error. I'm guessing its a time out issue since i've set the scalable_mode parameter to on. Any thoughts ???

Any way to automatically run discoverer reports based on an event ?

I am using discoverer 3.1.36. I am trying to automate the
running of discoverer reports - the objective is to
automatically run a set of discoverer reports after a particular
event.
This is part of a very critical solution for a large bank.
One of the solution that i am trying is to schedule the set of
reports for a future date and then after the event has occurred,
use a trigger to update the scheduled times of these reports.
But by just updating the 'next run time' field in the
eul_batch_reports table, there is no effect. The reports still
run at the initially scheduled time.
Can any one help me with this? or suggest any alternate
solutions.
Thanks in advance
Sandeep

you will need a javascript function something like - define in the page header or region header:
<script type="text/javascript">
function checkTheBox() {
document.getElementById('YOURCHECKBOXNAME').checked='checked';
</script>and then in the form element attributes of your textbox, have an onchange event:
onChange=checkTheBox();

Calculating local currency based on document date in goods receipt

We have a requirement in Poland that the local currency PLN should be calculated based on the document date when doing goods receipt, and not standard SAP posting date. I can only find note 619330 according to this requirement, but this note requires use of material ledger which we are not using. We have implemented note 574583 for the same requirement in transaction MIRO.
Since there are no notes from SAP according to the requirement in transaction MIGO, are there any enhancements available for using the document date instead for posting date when calculating local currency?
Best regards,
Terje

substitution used

Running Aging reports based on Document date in 2007

Similar Messages

Maybe you are looking for