Running Forms and Oracle 9i on the same PC

Some time ago I installed Oracle 8 and Forms and Reports 6i on the same PC (Windows 2000). I did specify a different ORA home for the Forms product to the database product. I believe this means that your registry is set to access one, probably your database, and not the other. My instructor on the Forms course I had attended, said the old 2.5 version of Forms and personal editions of Oracle would work together on the same PC, but Oracle have prevented this being possible in later releases, by having this ORA home issue. I failed to find a work round and no-one replied to my quey on the issue.
Do the latest dowloads, Oracle 9i, etc. allow you to run both the database and Forms on the same PC and if so are there any tips for me in installing them so it will actually work?
Many thanks,
Susan

Hi there,
installing 6i for 8i on the same box is not a problem. I find it better, on a personal pc to have them in different homes.
- create a folder called 'Oracle6i'
- when prompted for the install home - point to this new directory
once the installation is complete you will need to copy the tnsnames.ora file from the oracle database home and paste it into the corresponding directory of the oracle6i installation.

Similar Messages

  • CAn I run Lion and snow leopard on the same computer with different sign-ins?

    CAn I run Lion and snow leopard on the same computer with different sign-ins?

    Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

  • Running Lion and Snow Leopard on the same MacBook Pro

    So here's the thing .....apparently Lion won't run Photoshop and Illustrator CS2 (which I'm quite happy with and not about to shell out silly amounts of money to Adobe for even CS3) and apparently there may be (and I stress may be) problems with Word 2008 (likewise money to Microsoft for Word 2011).
    I think, and probably won't know till I've installed it, that I'd like to try Lion on my Macbook Pro but keep Snow Leopard as a separate OS to run Photoshop, Illustrator and if necessary Word until I can afford to pay Adobe (& possibly Microsoft though I can't really see what improvements they can make to Word 2008) the large amounts of money they seem to think they deserve for an upgrade.
    Does anybody out there know if it is possible to run both Lion and Snow Leopard on the same machine and if it is how do I do it?
    Thanks for taking the time to read this.

    Likely a corrupted cache file
    Read the
    Deeper cache cleaning/resetting
    https://discussions.apple.com/docs/DOC-3046

  • Siebel and Oracle Ebiz sharing the same DB

    Can Siebel and Oracle Ebusiness suite link up with the same database?
    Any pointers to this, i would someone would have tried this out with consolidating multiple Oracle applications.
    Any documentation available on this should be of great help.
    Thanks in Advance.

    Ebusiness suite has very specific requirements for parameters, database versions, tablespace naming, patch level, and cloning. I have not installed Siebel, but I suspect it would have it's own requirements which will be different from Ebus.
    I think it is very likely you will run into conflicts between the requirements of the two applications. Maybe not today, but definitely during the next patch or upgrade.
    For vendor applications it is better to keep them in their own databases to avoid requirements conflicts.
    You could open an SR with Oracle Support to ask if they will support a database with both applications installed.

  • Using Notes and Oracle Client in the same application on Linux crashes

    This thread is copied from a thread of the same name under Database - General, since I cannot get any replies there.
    Could someone from Oracle PLEASE comment on this.
    Our application on Linux loads the Notes client libraries and then the Oracle client libraries. The application will crashes when connectimg to an Oracle server. This is because the T_* symbols in libnnz11.so get fixed up into libnotes.so rather than locally into libnnz11.so where the functions are defined.
    #10 0xb4779ea6 in T_malloc () from /opt/ibm/lotus/notes/libnotes.so
    #11 0xae7ca050 in CMP_reallocNoCopy ()
    from /opt/oracle/product/10.2/db_1/lib/libnnz11.so
    #12 0xae7ccf7b in CMP_OctetStringToCMPInt ()
    from /opt/oracle/product/10.2/db_1/lib/libnnz11.so
    #13 0xae7c91fd in A_X931RandomInit ()
    from /opt/oracle/product/10.2/db_1/lib/libnnz11.so
    #14 0xaec09e0d in ztcriv ()
    from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
    #15 0xaec09cef in ztcrbp ()
    from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
    #16 0xaec09ca4 in ztcr2seed ()
    from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
    #17 0xaec09c54 in ztcrseed3 ()
    from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
    #18 0xaeb40683 in ztcsh ()
    from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
    #19 0xaea631c4 in kpusattr ()
    from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
    #20 0xaea7847e in OCIAttrSet ()
    from /opt/oracle/product/10.2/db_1/lib/libclntsh.so.10.1
    #21 0xb081cb9f in COCIObject::Connect ()
    from /opt/criticalpath/common/bin/libor9i.so
    We have circumvented the problem for the time being by making sure that we load the Oracle libraries before Notes, but we cannot go with that as a long term solution.
    In my opinion the Oracle library is wrongly linked since all the T_* functions are defined in libnnz11.so. When we load Oracle first, the loader debug trace shows the correct fixups. When we load Notes first, the loader trace shows the incorrect fixups. We are using dlopen(libor9i.so, RTLD_LOCAL) for Oracle and dlopen(libnotes.so, RTLD_LOCAL) for Notes. libor9i.so has a dependency on libclntsh.so.10.1.
    An opinion would really be appreciated.
    Thanks,
    John Unsworth

    Thanks again.
    We don't have an Oracle support contract because we do not use Oracle ourselves. We supply an application that synchronises data between multiple data servers and server types, of which Oracle is one and Notes is another, as well as LDAP servers and many other types.
    Producing a full resolved binary is therefore not an option since the types of data server are configured when the apploication is installed, and then the client software for each server is loaded as required.
    The end user of the application supplies the client libraries and has a support contract for the servers, in particular Oracle and Notes in this case. So the other option is for the end user to raise a ticket using his support contract, but he is reluctant to do that since he considers that this is our problem as we supply the application that is having the problem. So we are in a dead water area. We do not want to take out a support contract just to get what is an Oracle product problem resolved. I imagine that this problem is something that has not been encountered before, because our use of the client library in conjunction with other client libraries is probably unusual.
    So that is why I am hoping, without any success so far, that someone from Oracle will pick this up.

  • I can't run LR5 and EOS utility at the same time

    I'm running Mac OS 10.9.5, LR5.7 & Eos Utility 3.
    I can't run LR and Eos3 at the same time. Eos just crashes and have to force quit Eos.
    Any tips anyone?
    Do I have to downgrade to Eos2. Not a problem really I suppose.

    LR supports tethering using a Canon DLL and EOS Utility probably also supports tethering or at least uses something from a similar Canon DLL.  You probably cannot have two different versions of that DLL loaded at the same time, so it makes sense there are problems.

  • Can't run wiki and web services at the same time?

    I'm a newbie with Lion Server, but I've been running several web sites successfully for about 6 months.  I'm up to Server 10.7.4.
    I've been trying ever since the first installation of Server to get the wiki service running.  I had absolutely no luck until I turned OFF the web service (always got the "URL does not exist" error when I tried to create a group wiki from inside the Server app).  With the web service off, it all starts up fine and I created my first wiki (woohoo).  Turning web service back on kills access to the wiki.  I don't find reference to this in any of the dicussions, and especially not in Apple's documentation.
    Are the Wiki and Web services mutually exclusive?  Or is there a way around this?
    I'm using Dyndns to provide me with sub-domains to use, and I've dedicated one of them to the wiki service.  Traffic comes in on port 8080, where my web sites are on port 80.
    Thanks for any pointers...
    edbok

    LR supports tethering using a Canon DLL and EOS Utility probably also supports tethering or at least uses something from a similar Canon DLL.  You probably cannot have two different versions of that DLL loaded at the same time, so it makes sense there are problems.

  • Running OAS10g and Reporting Services on the same build?

    os: Fedora Core 6
    db: 10gR2
    oas: OAS10g 10.1.3.1
    I currently have OAS 10.1.3.1 installed; how can I install the reporting services from OAS 10.1.2.0.2 on the same build (just the reporting service, not the full OAS install)? If possible, would these run as two separate processes - different ports?
    Our situation is that we already have an application deployed and configured for 10.1.3.1 and we'd like to also run reports off the same machine. This version of OAS does not include the reporting services. Ideally, we want one machine to handle these - a sales demo machine...not a production environment.
    Any help or advice would be great.
    Thanks.

    Hi,
    You can have both 10.1.3 and 10.1.2 running parallell on the same server.
    If you want to have everything running on the same port, then you can either configure one of the Apache's to run everything, or better frontend both Apache's with 10.1.2's Web Cache.
    Regards,
    Martin

  • Running windows and OS 10 at the same time.

    I am going to order a new iMac.  I want to be able to have windows and Mac running at the same time.  I will be using two monitors.  My question is would I be better to order more ram, or the fastest processor to optimize the performance?  My brother has a mac book pro running parallels, he says that it works or but is quite slow.  Any help before I order my new iMac would be appreciated.

    More RAM would speed things up more when handeling multiple applications at the same time.
    (Borrowed from Kappy)
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.

  • Running Integrated and Dedicated Graphics At The Same Time

    Hey all, I know this question has been asked before, but I haven't found an answer particularly pertaining to my situation. 
    First of all, I have an HP Compaq Elite 8300 with an Intel i5-3470, integrated graphics (DisplayPort and VGA.) I also have a dedicated GPU (Nvidia GeForce 7300 LE.) I enabled the integrated graphics in the BIOS to use both the integrated graphics and the dedicated graphics at the same time. 
    Now, I have one monitor plugged into the integrated graphics, as I set that as the primary GPU. Whenever I plug a monitor into the 7300, both screens go blank and nothing shows up. As a matter of fact, on start-up once, I had all four monitors plugged in and all that happened was that every monitor stayed blank and blinked every few seconds. Any ideas on what to do?

    Hi,
    When the BIOS detects a discrete graphics card the integrated graphics processor will be disabled. HP normally placed black covers over the motherboard video ports marked do not remove when a discrete graphics card is shipped with the PC. Trying to run both is probably confusing the BIOS in your PC.
    Not all PCs containing the Intel i5-3470 will have an enabled graphics processor.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Problem running DMVPN and IPSec VPN at the same time

    I have a hub-spoke VPN network: 2 hub routers are 7206 VXR and remote routers are 2800. Each hub router has had number of point-to-point IPSec+GRE tunnels configured and running with remote sites. I'm now adding DMVPN between each hub router and a few other remote sites. The DMVPN is running fine between hub and spokes, but somehow it caused all the eixsting point-to-point IPSec tunnels drop. Here are some details:
    1) Hub DMVPN config:
    crypto isakmp key MYKEY address 12.12.12.12
    crypto ipsec profile DMVPN
    set transform-set DM
    interface Tunnel1
    ip address 192.168.1.1 255.255.255.0
    no ip redirects
    ip mtu 1400
    ip nhrp map multicast dynamic
    ip nhrp network-id 1
    ip nhrp holdtime 600
    tunnel source G0/0
    tunnel mode gre multipoint
    tunnel protection ipsec profile DMVPN
    router eigrp 1
    no passive-interface Tunnel1
    2) Spoke DMVPN config:
    crypto ipsec profile DMVPN
    set transform-set DM
    crypto isakmp key MYKEY address 14.14.14.14
    interface Tunnel1
    ip address 192.168.1.2 255.255.255.0
    ip mtu 1400
    ip nhrp map 192.168.1.1 14.14.14.14
    ip nhrp map multicast 14.14.14.14
    ip nhrp network-id 1
    ip nhrp holdtime 600
    ip nhrp nhs 192.168.1.1
    tunnel source G0/0
    tunnel destination 14.14.14.14
    tunnel protection ipsec profile DMVPN
    3) When DMVPN is up, hub router existing IPSec tunnels are shown ISAKMP failure.
    Hub# show crypto isakmp sa
    14.14.14.14     20.20.20.20 MM_NO_STATE       1508    0 ACTIVE (deleted)
    4) After I shut down interface Tunnel1, existing IPSec tunnels are coming back. ISAKMP SA shows QM_IDLE state.
    Have anyone seen similar issues between DMVPN and traditional point-to-point IPSec+GRE tunnels on the same router?
    Thanks a lot

    I have a hub-spoke VPN network: 2 hub routers are 7206 VXR and remote routers are 2800. Each hub router has had number of point-to-point IPSec+GRE tunnels configured and running with remote sites. I'm now adding DMVPN between each hub router and a few other remote sites. The DMVPN is running fine between hub and spokes, but somehow it caused all the eixsting point-to-point IPSec tunnels drop. Here are some details:
    1) Hub DMVPN config:
    crypto isakmp key MYKEY address 12.12.12.12
    crypto ipsec profile DMVPN
    set transform-set DM
    interface Tunnel1
    ip address 192.168.1.1 255.255.255.0
    no ip redirects
    ip mtu 1400
    ip nhrp map multicast dynamic
    ip nhrp network-id 1
    ip nhrp holdtime 600
    tunnel source G0/0
    tunnel mode gre multipoint
    tunnel protection ipsec profile DMVPN
    router eigrp 1
    no passive-interface Tunnel1
    2) Spoke DMVPN config:
    crypto ipsec profile DMVPN
    set transform-set DM
    crypto isakmp key MYKEY address 14.14.14.14
    interface Tunnel1
    ip address 192.168.1.2 255.255.255.0
    ip mtu 1400
    ip nhrp map 192.168.1.1 14.14.14.14
    ip nhrp map multicast 14.14.14.14
    ip nhrp network-id 1
    ip nhrp holdtime 600
    ip nhrp nhs 192.168.1.1
    tunnel source G0/0
    tunnel destination 14.14.14.14
    tunnel protection ipsec profile DMVPN
    3) When DMVPN is up, hub router existing IPSec tunnels are shown ISAKMP failure.
    Hub# show crypto isakmp sa
    14.14.14.14     20.20.20.20 MM_NO_STATE       1508    0 ACTIVE (deleted)
    4) After I shut down interface Tunnel1, existing IPSec tunnels are coming back. ISAKMP SA shows QM_IDLE state.
    Have anyone seen similar issues between DMVPN and traditional point-to-point IPSec+GRE tunnels on the same router?
    Thanks a lot

  • Can you run 7 and 6.5 at the same time?

    Since one of the key features I use is missing in version 7 (duration of a selection) I'm wondering if I can somehow run 6.5 along with V7 and, if so, how this would be done.
    Thanks!
    Rusty

    I use both (6.5.2 and 7.0.3) on my Mac mini.
    You can only have one "install" of QT on the machine but you can use the QuickTime Player from both versions at the same time.
    Version 6.5.2 will run "on top" of the version 7 "framework". You'll have all of the "old" menus when you use it. But you'll also have access to the new H.264 video codec.
    Find a copy of QuickTime Player (maybe a back up or a different machine) and place it on your Desktop.

  • HTML DB form and reports in on the same Page

    I have a form take input from the user and two reports (please see the URL and LINK).
    If I click on the Staff report to populate the employee_no, name, and then click on the service report to populate the service_id, service name.
    The problem is if populate the employee_no, name then it clear out the service_id, name and other fields. vice versa.
    Why?
    Is there solution?
    URL
    http://tinypic.com/view/?pic=rblds0
    LINK
    http://i2.tinypic.com/rblds0.jpg

    Sounds like you might be specifying Clear Cache for page in your column link attributes.
    So, every time you click on the column link, it clears session state for items on the target page and then proceeds to set the items you specify in the column link itself.

  • Can I run FCP7 and FCP X on the same system?

      I can't open my FCP 7 projects in FCP X so I will need both programs to run simultaneously so I can access previous work while building new cuts.  This seems utterly ridiculous but it appears to be true.  Please correct me if I'm wrong since I have more than 400 FCP 7 projects, the majority of which are still ongoing... what do I do to handle this, start from scratch on 400 projects that date back several years... brutal.

    Personally, I'd never switch a project in which I've invested time and effort to a new application, other than a test project to begin the investigation into how the new app could work in the future. I don't think "pros" even update an existing app like FCP while in a project unless the update is specifically for an issue they are having with their project. FCP7 is great and will continue to be great, ongoing projects should stay there.
    It will be interesting to see as FCP X matures if Apple or a third party develops a way to import FCP7 projects, or at least aspects of it, but as FCP X is such a different approach I wouldn't count on it.
    Apparently that means that someday we'll need to "freeze" an FCP7 installed system in time (not today, but in the next year os so) to be able to just work on and have access to FCP7 projects. New and discontinued apps are a fact of life in computer world, as inconvenient as it may be. Operating Systems, and hardware that will run them, go away too. In 20+ years I've had to abandon OS platforms, apps, and documents, or make a switch where I had to start over, but never anything as complex or meaningful as my FCP7 projects.
    So, basically, I agree with Tom, I just use a few more words. ::grin::

  • I need to run Lion and Snow Leopard on the same computer

    i have no money so the solution needs to be free.
    Can anyone help?

    Pondini: Formatting,  Partitioning, Verifying,  and  Repairing  Disks... - http://web.me.com/pondini/AppleTips/DU.html
    but I wouldn't just launch into this. I suspect your computer cannot run Snow Leopard as a major boot system.  There may be virtualization options, but if you don't know how to partition a drive then 2 pages of instruction using command lines to achieve virtualization may take a bit of easing into.  I haven't really gone into it myself, though I do recall discussions questioning legality.

Maybe you are looking for

  • Baseline Date error in Billling

    Hi,       While billing a document, I got the error "Baseline date for payment not permissible - correct this date" : The specified baseline date for payment is more than 99 years after the current date. Could anyone tell me what  could have gone wro

  • I bought an iphone 4s in canada factory unlocked and my gsm sim not activating my iphone 4s

    my factory unlocked iphone wont activate with my gsm sim card can anyone help ?

  • Error SXMB_MONI

    Hello, i've a RFC - JDBC interface . The database is Microsoft access, when i trigger the interface the follow error occurs in SXMB_MONI, response msg: <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> - <!--  Inbound Message   --> - <SAP:Erro

  • Jsp:plugin jre

    Hello On the my system I have JAVA_HOME set to 1.4._10, in the browser NS, I have1.5_06, however the 1.4_10 plugin. The code below when processed by Tomcat 5.5.12 complains about a jre mismatch. How can I make the plugin configuration accept anything

  • Queue time display in CAD activity pane?

    Using IPCC Enterprise 7.0, I can't see the time a caller spent in queue in the activity pane in CAD. The CAD guide only had one reference to it which was a reg setting on the PG. I checked and my reg setting is already correct. Anybody have any ideas