Running my imac on my HDTV-please help

hey guys i have a 20' imac and i also have a 50' Samsung DLP HDTV, now, i have a question, can i hook my imac to my HDTV and watch video from my computer on the HDTV? i just dont want to go through the hassle of converting the videos to the format playable by my various media players(ps3 etc), so is it possible? i believe i read somewhere about a mini-dvi cable, is that what i need? where can i get these? do best buys or any other similar retailers(CC,target etc) carry these cable? btw online shope is not an option for me

Depending on the inputs available on your TV use on of the following:
Apple Mini-DVI to DVI Adapter
Apple Mini-DVI to VGA Adapter
Apple Mini-DVI to Video Adapter.
All available for $19 online or as you say this isn't an option you can get any of the above parts in any Apple Retail Store and from most Apple suppliers. Bear in mind they are short; say 15cm only, so you'll need a long DVI/VGA/S-Video cable too.
The other option might be tv if your TV isn't that close to the iMac. Have a read of this page (link).
kind regards
mrtotes

Similar Messages

  • My screen has gone blank on startup and occasionally a grey folder with a question mark appears. I have tried rebooting either by pressing the start up with power or pram.. Neither attempts have worked ! My iMac is 2008. Please help :)

    My screen has gone blank on startup and occasionally a grey folder with a question mark appears. I have tried rebooting either by pressing the start up with power or pram.. Neither attempts have worked ! My iMac is 2008. Please help :)

    Hey Carolinearnold!
    I have an article for you that seems to address this issue and can provide some troubleshooting steps for you:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Imac slow and Freezes PLEASE HELP!

    PLEASE HELP!!!
    Hello i have and imac G5 i bought it in about june of 2005...
    It was running very slow and always freezing and then i upgraded the RAM to 1gb
    and it started working much better. then i upgraded to OS Leopard andalso pro tools LE 7.4
    and since then has been performing slow and freezing all the time. ai recently added another gig of RAM just to see if that was the problem , but it seems to be working just as slow. Does anybody know what it might be. Its a 1.6 GHZ power PC G5 and has a 80GB HD and have about 20 GB free so i dont think thats it. Please let me know if any of you have had this problem or know how to fix it thanks

    Except for the keyboard & mouse, disconnect all devices from your computer.
    Repair your disk from your System DVD.
    Repairing permissions from the Tiger or Leopard DVD
    Boot up from your Tiger or Leopard Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    If Disk First aid is able to complete the repair now click on the "Repair permissions" button.
    Once this process has been completed restart your computer.
    ===============
    Get a larger HD
    ===============
    Use Software Update to update your OS to OS 10.5.6.
    Afterwards, repair permissions & restart your computer.
    Your system info confirms you are still using an outdated version - OS 10.5.4.

  • Ethernet Patch Cable from One iMac to AirPort Extreme Please help!

    Hi, I have an iMac on one side of my home office, and a cable modem connected to my AirPort Extreme. I just bought a 25 ft. patch cable to run and connect to the router for faster speeds, but it is not working. I tried connecting it to the AirPort and the modem, and I did not get a light on the AirPort extreme or on the modem (I have disabled the wireless functionality on the gateway so it is just a modem now). I noticed that the cable has metal on the sides of the plug. Does that mean anything? How can I connect this and get it working properly?
    Please help me!

    your post is a little confusing
    your imac is on one side of your home, and both your cable modem and extreme are on the other side of the house?
    temporarily move the imac to the same side and try a different cable, seems like a cable issue

  • Kernel panic error on my iMac since two weeks - please help!

    Hi,
    I'm having this error once or two times a day with my iMac restarting! What can I do ? Is there something to fix ?
    I do not really understand what all that codes means but it seems to be audio ?
    Please help!!
    Thank you!
    Antoine
    My error message:
    Interval Since Last Panic Report:  4509849 sec
    Panics Since Last Report:          4
    Anonymous UUID:                    31FE109F-FA3B-4C12-9F08-FF430D846E70
    Sat Dec  1 08:01:53 2012
    panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81227b23, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000400000058, CR3: 0x000000006d314000, CR4: 0x0000000000000660
    RAX: 0x0000000400000000, RBX: 0xffffff8011e33310, RCX: 0x0000000400000000, RDX: 0xffffff8013586af0
    RSP: 0xffffff80f020bae0, RBP: 0xffffff80f020baf0, RSI: 0xffffff8011e33310, RDI: 0xffffff8013586af0
    R8:  0x0000000000000000, R9:  0x0000000000000000, R10: 0xffffff8014deec00, R11: 0xffffff800086edd0
    R12: 0xffffff8011e33310, R13: 0xffffff8014deec00, R14: 0xffffff8012d27a00, R15: 0xffffff8014deec00
    RFL: 0x0000000000010207, RIP: 0xffffff7f81227b23, CS:  0x0000000000000008, SS:  0x0000000000000010
    CR2: 0x0000000400000058, Error code: 0x0000000000000000, Faulting CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80f020b790 : 0xffffff8000220792
    0xffffff80f020b810 : 0xffffff80002c4794
    0xffffff80f020b9c0 : 0xffffff80002da55d
    0xffffff80f020b9e0 : 0xffffff7f81227b23
    0xffffff80f020baf0 : 0xffffff7f812242f2
    0xffffff80f020bb10 : 0xffffff7f812255df
    0xffffff80f020bb40 : 0xffffff800063dd21
    0xffffff80f020bba0 : 0xffffff7f81222fb8
    0xffffff80f020bbe0 : 0xffffff800063baeb
    0xffffff80f020bc20 : 0xffffff7f81222f16
    0xffffff80f020bc40 : 0xffffff8000656fbb
    0xffffff80f020bd80 : 0xffffff80002a3f08
    0xffffff80f020be80 : 0xffffff8000223096
    0xffffff80f020beb0 : 0xffffff80002148a9
    0xffffff80f020bf10 : 0xffffff800021bbd8
    0xffffff80f020bf70 : 0xffffff80002aef10
    0xffffff80f020bfb0 : 0xffffff80002daec3
    Kernel Extensions in backtrace:
    com.apple.iokit.IOAudioFamily(1.8.6f18)[8D690452-BF17-3DA0-BCAD-F1BCF1495926]@0 xffffff7f8121a000->0xffffff7f81246fff
    dependency: com.apple.kext.OSvKernDSPLib(1.3)[CF50CA5A-4AF6-3E28-B84B-9619535445E7]@0xfffff f7f81214000
    BSD process name corresponding to current thread: coreaudiod
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
    System model name: iMac11,1 (Mac-F2268DAE)
    System uptime in nanoseconds: 147270514860942
    last loaded kext at 116703519175982: com.apple.driver.AppleUSBCDC    4.1.22 (addr 0xffffff7f807cd000, size 16384)
    last unloaded kext at 116796198771636: com.apple.driver.AppleUSBCDC    4.1.22 (addr 0xffffff7f807cd000, size 12288)
    loaded kexts:
    com.intego.iokit.VirusBarrierX6Service    10.6.18
    com.intego.iokit.BehavioralKext    1
    com.intego.iokit.VBX6NKE    1
    com.intego.kext.VirusBarrier.AppBarrierKPI    10.6.18
    com.intego.kext.VirusBarrierKPI    10.6.18
    com.apple.filesystems.smbfs    1.7.2
    com.apple.filesystems.autofs    3.0
    com.apple.driver.AppleBluetoothMultitouch    70.12
    com.apple.driver.AppleHWSensor    1.9.5d0
    com.apple.driver.AudioAUUC    1.59
    com.apple.driver.AppleMikeyHIDDriver    122
    com.apple.iokit.IOUserEthernet    1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager    4.0.8f17
    com.apple.driver.AppleUpstreamUserClient    3.5.9
    com.apple.driver.AppleHDA    2.2.5a5
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AppleMikeyDriver    2.2.5a5
    com.apple.driver.AGPM    100.12.75
    com.apple.driver.AudioIPCDriver    1.2.3
    com.apple.kext.ATIFramebuffer    7.3.2
    com.apple.driver.ApplePolicyControl    3.1.33
    com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d8
    com.apple.ATIRadeonX2000    7.3.2
    com.apple.driver.AppleBacklight    170.2.2
    com.apple.driver.AppleLPC    1.6.0
    com.apple.driver.AppleMCCSControl    1.0.33
    com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.8f17
    com.apple.driver.AppleIRController    312
    com.apple.driver.AppleUSBCardReader    3.0.6
    com.apple.iokit.SCSITaskUserClient    3.2.1
    com.apple.AppleFSCompression.AppleFSCompressionTyp  eDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTyp  eZlib    1.0.0d1
    com.apple.BootCache    33
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCISerialATAPI    2.0.3
    com.apple.iokit.IOAHCIBlockStorage    2.1.0
    com.apple.driver.AppleUSBHub    5.1.0
    com.apple.driver.AirPort.Atheros40    505.67.1
    com.apple.iokit.AppleBCM5701Ethernet    3.2.4b8
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleAHCIPort    2.3.1
    com.apple.driver.AppleFWOHCI    4.9.0
    com.apple.driver.AppleUSBEHCI    5.1.0
    com.apple.driver.AppleACPIButtons    1.5
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.5
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClien  t    195.0.0
    com.apple.nke.applicationfirewall    3.2.30
    com.apple.security.quarantine    1.4
    com.apple.security.TMSafetyNet    8
    com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
    com.apple.kext.triggers    1.0
    com.apple.driver.AppleMultitouchDriver    231.4
    com.apple.driver.IOBluetoothHIDDriver    4.0.8f17
    com.apple.iokit.IOSurface    80.0.2
    com.apple.iokit.IOSerialFamily    10.0.5
    com.apple.driver.DspFuncLib    2.2.5a5
    com.apple.iokit.IOAudioFamily    1.8.6fc18
    com.apple.kext.OSvKernDSPLib    1.3
    com.apple.iokit.IOFireWireIP    2.2.5
    com.apple.driver.AppleHDAController    2.2.5a5
    com.apple.iokit.IOHDAFamily    2.2.5a5
    com.apple.driver.AppleGraphicsControl    3.1.33
    com.apple.driver.AppleSMC    3.1.3d10
    com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
    com.apple.driver.AppleSMBusPCI    1.0.10d0
    com.apple.driver.AppleBacklightExpert    1.0.4
    com.apple.iokit.IONDRVSupport    2.3.4
    com.apple.driver.IOPlatformPluginFamily    5.1.1d6
    com.apple.driver.AppleSMBusController    1.0.10d0
    com.apple.kext.ATI4800Controller    7.3.2
    com.apple.kext.ATISupport    7.3.2
    com.apple.iokit.IOGraphicsFamily    2.3.4
    com.apple.driver.CoreStorage    182.13
    com.apple.driver.AppleUSBHIDKeyboard    160.7
    com.apple.driver.AppleHIDKeyboard    160.7
    com.apple.driver.AppleUSBBluetoothHCIController    4.0.8f17
    com.apple.iokit.IOBluetoothFamily    4.0.8f17
    com.apple.iokit.IOUSBHIDDriver    5.0.0
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.2.1
    com.apple.iokit.IOUSBMassStorageClass    3.0.3
    com.apple.driver.AppleUSBMergeNub    5.1.0
    com.apple.driver.AppleUSBComposite    5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
    com.apple.iokit.IOUSBUserClient    5.0.0
    com.apple.iokit.IO80211Family    420.3
    com.apple.iokit.IOEthernetAVBController    1.0.1b1
    com.apple.iokit.IONetworkingFamily    2.1
    com.apple.iokit.IOAHCIFamily    2.0.8
    com.apple.iokit.IOFireWireFamily    4.4.8
    com.apple.iokit.IOUSBFamily    5.1.0
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOHIDFamily    1.7.1
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    177.8
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.driver.DiskImages    331.7
    com.apple.iokit.IOStorageFamily    1.7.2
    com.apple.driver.AppleKeyStore    28.18
    com.apple.driver.AppleACPIPlatform    1.5
    com.apple.iokit.IOPCIFamily    2.7
    com.apple.iokit.IOACPIFamily    1.4
    Model: iMac11,1, BootROM IM111.0034.B02, 4 processors, Intel Core i7, 2.8 GHz, 8 GB, SMC 1.54f36
    Graphics: ATI Radeon HD 4850, ATI Radeon HD 4850, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
    Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HDS722020ALA330, 2 TB
    Serial ATA Device: HL-DT-ST DVDRW  GA11N
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: Desktop HD BD07, 0x03f0  (Hewlett Packard), 0xbd07, 0xfa130000 / 5
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 4
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 3
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd140000 / 5
    USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd142000 / 6
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3

    Hi Antoine,
    Was just about to recommend what Paul said, even though it does look like Audio.
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • My macbook pro run slowed after upgrade to Yosemite, please help!

    Why my mac slowed after I upgrade to Yosemite, Please help!

    You might want to update your profile. Helps people trying to help you.
    Activity Monitor - Mavericks  also Yosemite
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy
    Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information

  • Can not run file.class with Internet Explorer ( Please help me)

    Please help me ! ! (Beginer Programming)

    First, you can't run a .class file. Secondly, you have to post your code, that is the only way we could help

  • Have a New MBP with Lion preinstalled. Need Snow Leopard instead. Have time machine from old computer running Snow Leopard as well. PLEASE HELP!!

    I have a brand new Macbook Pro with Lion preinstalled. I haven't even turned it on yet. I desperately need Snow Leopard because my music software is not Lion compatible yet. I also have a Time Machine backup from my old Macbook that is currently running Snow Leopard 10.6.8. How can I get Snow Leopard on my new Macbook Pro? Also, will Time Machine replace the applications on the new Macbook Pro with the older versions I have in the backup or how exactly does that work? I've been staring at the box for 2 days now worried I won't be able to use any of my software. PLEASE HELP ME!

    It depends on the build of your machine; normally, no Mac can ever boot from a system older than what it came with. However, there are exceptions: right around the time the new OS is released, there may be some machines which will be able to run both OS's.  Here is some information on software builds:
    http://support.apple.com/kb/HT1159
    You may have to call Apple to figure out if you can use SL on yours or not.

  • I am unable to get itunes to run on my powerbook g4. Please help!

    My sister gave me her old powerbook g4. She erased the hard drive and relaoded the software. I cant get itunes to open or run. It said i needed quicktime so I downlaoded it from the apple site but it still will not run. Am I doing something wrong? Is there a different download that I need? Please help. I am new to apple computers so please be paitcent with me.

    Your computer may need a series of updates to bring it up to speed with the last versions of software supported by 10.4  Note that these will themselves be several years old since Apple hasn't supported Tiger for several years.  In particular you cannot upgrade to the newest iTunes or use any brand new i-devices on a computer running 10.4
    One way to do updates is to run Software Update.  Do the updates one by one since trying to do many at one time often results in problems.  Use Disk Utility to repair permissions before and after.
    For general Tiger update questions I suggest you post on the Tiger 10.4 forum.  As for iTunes, the newest version you can run is 9.2.1 available at
    iTunes 9.2.1 (the newest that will run under Tiger) - http://support.apple.com/kb/dl1056

  • HT4293 just downloaded the update but it requires that i be running a LION, where as i am running now Mountain Lion... please HELP!!

    can some one please help....
    i have a MBP 17" MID 2009 model...
    i just got myself a Apple 27" LED display... now when i connect it and want to lower the brightness i cant... it simply does not have that option... also i got the update from apple site for LED display and it says i need to be running a MAC OS X 10.6
    can please someone help me... i love this monitor but **** its BRIGHT!!

    hi i have Mountain Lion and i connected the display with USB cable attached... and still cant control brighness...
    the software i am looking for is supposed to update the firmware of the display, but as i picked up perhaps an old stock piece this firmware was not on the display itself.

  • ITunes will not run. Several error codes. Please help

    A couple months ago I tried updating iTunes and received the error "Could not open key:
    UNKNOWN\Components\69413F169B198734FA40BC8B73511DB0\108B43C0CEA676640B35306AE7D2 4051.
    Verify that you have sufficient access to that key, or contact your support personnel." (take note my key is different than the one above thats just for an example.) So I read and read and finally figured out that my problem came down to permissions for that key. I changed the permissions and voila it installed properly! But now I just tried updating again because I want to get iOS5 on my iPhone4. I received the same error again, "Could not open key..." so I thought heck this is an easy fix and I changed the permissions again and this time it did not work. So then I uninstalled Quicktime, iTunes, and all other Apple software from my computer (which is running Windows 7 btw). I tried to reinstall iTunes and then it went through the install and finally comes to a screen that says "iTunes has successfully been installed on your computer." So I closed that window, restarted my computer, clicked on the iTunes icon and I get a completely different error now. This error is a two-part pop up. The first error window that pops up says:
    "The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll."
    I click OK.
    Then I get:
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)"
    I've tried reinstalling it again and I get the same error. I tried stuff from this thread ( https://discussions.apple.com/thread/2262389?start=0&tstart=0 ) and it doesnt seem to be working. Can someone please help me work through this. I would appreciate it very much, and please explain everything in computer-illiterate terms as I'm not the greatest with computers these days.
    Thank you,
    Max

    OK, so iTunes opens OK in another account so it is a user specific problem.
    Just to be absolutely clear, have you carried out the all the user specific steps:
    Remobe plugins
    Remove preference files
    Recreate Library
    Check for Content files with issues.
    One of those steps usually solves user specific issues.
    Something else that you could try is to create a new iTunes library elsewhere on your disk.
    Hold down the shift key and start iTunes. Keep holding the shift key until you are prompted to choose or create a library. Select "Create" and create a new library somewhere way from the your music folder eg in Documents - so it is completely separate from your existing iTunes.
    Does iTunes Open like this?
    If so go do Edit>>Preferences>>Advanced and Un-check "Copy to iTunes Music folder when adding to library". This is to stop iTunes copying your music files when you add to you new library.
    Now try adding music from your original iTunes Music folder in stages as in the "Content files with issues" section.
    This approach has worked for someone else although they did not say if they stuck with their test library or if they ever found the problem with the original one.

  • Can't run Hardware Test at all. PLEASE HELP!

    When hold 'D' during startup, nothing happens.
    When I insert my installation DVD and perform the same task, my MBP ejects the DVD.
    When I try and use the option + D command, and try and connect to my network, the password isn't correct.  This password has worked for everything else I've ever used over said network. 
    I'm officially out of options, can someone please help?

    I'm using a disc that I got from the Apple Strore because I lost my original.
    Retail installation DVD & the System DVD are 2 different types of discs.  The System DVD is machine specific which what you need to run AHT.  Per the KB Article I linked:  "If you updated your Mac to OS X v10.8.4 or later, use the system software disc or USB flash drive that came with your Mac."
    You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available. 
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource:  International Support Phone #s.

  • I just hooked up a airport express as my new router and now I cant play videos on my imac or ipad. PLEASE HELP.

    I just hooked a new airport express and now I cant play videos on my imac or ipad. I do have a sprint airave hooked up to the system. I dont know if i have all the cables hooked up right but everything works except playing videos on either device. PLEASE HELP. Thank you

    Yea rudegar its weird. I dont have sound either. I have read to put airave behind router but I cant find anywhere how to hook all the wires up. I have 2 ports in the back of the airport express(1 wan and 1 ethernet), 1 port on my modem and 3 ports on the airave(wan and 2 lan). I dont know which cable goes where, wan ,lan, ethernet, back of computer etc. Im an idiot when it comes to all this stuff but Im sure its simple fix but obviously not for me. I read people put modem to router to airave but dont say which port to put them in.

  • My old imac hdd doesnt mount Please Help!!!!

    Hi all,
    I upgraded my IMac's 6.1 (its first gen. Intel Imac 24 inch) hardrive with a new 2TB HDD. And I upgraded OS Snow Leopard to Lion. It works like a charm.
    After I needed some old stuff from the old HDD, I connected it through USB with 2 different docks, but the new system doesnt mount it. I looked at the Disk utility it doesnt even see it.
    Please help me I dont want to reinstall the old HDD again.
    Is there a way to mount it?
    Best Regards

    There is nothing special about using a previously formatted and otherwise working hard disk in an external USB enclosure. Connecting it to your Mac should be sufficient for it to mount and become immediately available, so I suggest your problems lie with the enclosure or USB cable.
    Try using Startup Manager: Make sure the drive is connected, then press and hold an option key while starting your Mac.

  • Why are my fans running at 6208 rpm!! please help!!!!!!!!!

    The fans are running at 6208 rpm and it gets very hot please help!!!
    Macbook   Mac OS X (10.4.9)   I got my macbook yesterday on 3/24/07

    If it isn't a particular high-CPU process that's causing the problem, you can try resetting the SMC:
    http://docs.info.apple.com/article.html?artnum=303319

Maybe you are looking for

  • MY I POD PLAYS VIDEOS BUT THERE ISNT ANY SOUND aNY IDEAS ON HOW TO FIX?

    HOW DO YOU GET SOUND TO PLAY ON VIDEO CLIPS?

  • Inability to Play Videos

    I know this question has been going around discussions for awhile but I can't seem to figure this out to the point to make it work. So, I thought I would lay out my problem and in the event that anyone knows the direct way to solve it, I would be gra

  • How do I get CS4 onto my new macbook?

    I have been using CS4 on my pc for quite a while now and I just switched to a mac. I dont want to upgrade at all. I have my serial number and I want to know where I can download the software that I own.

  • Audio stops after several seconds of playing in CS6 on PC (R3D files)

    Hi, I have recently come across a significant problem while editing R3D files in Premiere Pro CS6. When I play back my sequence the video will play fine but the audio will only play for a couple of seconds before cutting out. The audio meters continu

  • Issue: Handling unit creation

    Hi, While creating u2018Handling Unitsu2019 in transaction MFPP1 system creates it successfully in back groung BUT while trying u2018Onlineu2019 it ask for u2018Packing Instructionu2019, after giving input of same u2018Packing Instructionu2019 (Which