\Running program in back ground

Hello,
   I want to run a program a particular time. how can i do it?. Please send me some doc's regarding this please to [email protected]
regards
SDN powered

Hi,
       You can do this through SM36 transaction.
SM36 -> specify job name ( any name ) ->
Click the start condition -> select the option you require
-> if you want the job periodic click the periodic job flag -> click the radio button periodic values and select frequency
-> save the dialog screen
->click on step ->Provide the program name and if any variant ->check and save the screen
-> Finally again save the main screen -> Your job will now be scheduled.
To monitor just click on Job selection. or go directly through  SM37
Regards,

Similar Messages

  • Procedure to run program in back ground and foreground.

    Hi  All,
    What is the procedure to execute for a report program to execute regulrly e.g daily as background job?
    Also it can be executed manually in foreground.
    Please help its urgent.
    Thanks in advance,
    Amruta

    Hi,
    Follow below steps.
    1. Goto SM36--Give Your first Job Job1, Choose Job class
    2. Click on Step, give the Program name and Variant. Come back to main screen.
    3. Click on start Condition then a Popup will be displayed. There click on Date/Time. below you can see Period values there choose Daily, hourly etc.
    4. then Save.
    <REMOVED BY MODERATOR>
    Regards,
    Ashok
    Edited by: Alvaro Tejada Galindo on Feb 18, 2008 1:59 PM

  • How to run the program in back ground with out selection screen ?

    Hi,
    I want to run the program in back ground but don't have selection screen. How to run this program in back ground
    as program has no selection screen.
    Waiting for quick response.
    Best Regards,
    Padhy
    Moderator message: basic, please search for available information/documentation.
    Edited by: Thomas Zloch on Feb 21, 2011 12:43 PM

    Hi,
    Go to transaction SE38 --> Execute --> Background.
    If your program contains selection screen, you have to pass your input values as variants.

  • I need to run the program in back ground and then update two fields

    hi gurus
    i need to run the program in back ground and then update two fields in the z table by mm02 transaction by using bapis , can any one give me the code for this.
    Message was edited by:
            Rocky

    hi
    good
    go through this link
    http://www.sapdb.org/7.4/htmhelp/34/ee7fba293911d3a97d00a0c9449261/content.htm
    thanks
    mrutyun^

  • How do I turn off programs running in the back ground on my iPad

    How do I turn off apps running in the back ground with the new update

    How to Close Apps
    Double Tap the Home Button... Then swipe the App (not the icon) Upwards... Tap the Home Button when finished.
    From Here  >  http://support.apple.com/kb/HT4211

  • Program with Back Ground User.

    Hi ,
    In my development we are sending data from MDM to R3 through XI.
    Here iam having the following issue:
    When sending IDOC's from XI to R3, some of the IDOC's are struck in Queue  with status 64 and, those not going to be processed at all. This is because of the unavailability of the work processes at that time. All this is done through the back ground user XIS_REMOTE.
    Iam trying to process the unprocessed IDOC's through a standard program, all the IDOC's are processed, but the data created under the Fore Ground user (i.e. my id).
    <b>I want to know is there any possibility to run or write the program using back ground user XIS_REMOTE</b> <b>so that all the unprocessed IDOC's will process and get the back ground user XIS_REMOTE.</b>
    Any inputs appriciated.
    Best Regards
    Shyam Reddy.

    ST05 you can trace SQL-statements and get expainings how these statements are being worked upon by the database. this is more a tool for investigating the performance of abaps on your 'special' database.
    since you posted your request in the security forum i will assume that you want to do an authority trace. use tx. ST01 instead of ST05. Set the filter options to the program and/or user you want to trace and flag the areas you want traced like 'authority check' 'database access' 'kernel commands' ...
    activate the trace using the matchlight-icon. run the background job to be traced. stop the trace after a sufficient time (or until the job hits the error you want to investigate). then press 'evaluation' and check the boxes for the lines to be displayed again ...
    if both my answers don't fit to your problem come back here and state a bit more precisely what your problem is, maybe we find another approach to it.

  • Firefox is running in the back ground, how can I turn it off to reinstall it?

    I tried to get into the save mode but Firefox still will not come up. I have uninstalled the program and reinstalled and still I can not get Firefox to come up on the screen. But when I shut down my computer it says it is running. It must e running the back ground. Please help me get Firefox working again. I think this is a Mozilla Problem because I did not install addons, etc.

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • Want commands running in the back ground in sql developer

    HI all,
    I am new user to oracle sql developer. i started using it and found interseting. It is very easy just using the GUI interfaces. what ever i need to do i can do using the GUI interfaces instead of using commnads. makes my work easier. BUt there starts my concern
    if i continue to use the tools one day i will not know the commands which are executed actually.
    Is there any way throught which i can look what every that commands or queries that are executed in the back ground for my instruction in the foreground

    Hi,
    If you truly wish to see all the SQL and PL/SQL executed for a given connection, you can try the following:
    1. Tools -> Monitor Sessions...
    2. Select a connection for a user with appropriate privileges (e.g., must be able to run DBMS_MONITOR)
    3. In the list of sessions, right-click on a session of interest, select Trace Session and click Apply
    4. After completing the desired activity on the connection of interest, close the connection.
    5. Open the trace file in SQL Developer (File -> Open, or drag and drop it) -- make sure the Filter drop-down is set to All -- to see the SQL.
    6. Pick one of the four tabbed views of the trace file data: List, Tree, Statistics, History
    Step 5 is easy if the DB is local. For example, with Oracle 10g Xe on Windows, look for the most recent trc file in a directory like
    C:\oraclexe\app\oracle\admin\XE\udumpFor a remote DB you would need to copy the trc onto a shared network drive or ftp it to your local machine.
    If you just wish to see DDL commands as you manipulate DB object definitions from the Connection Navigator tree or the Object Viewer Actions list, the UI usually provides a SQL tab so that you may view the SQL before clicking the Apply button.
    Hope this helps,
    Gary
    SQL Developer Team

  • How do I turn off programs running in the back ground  for iOS7?

    How do i turn off programs running in the background using iOS 7?

    *iOS 7 closing running apps*
    Double-tapping the Home button will bring up the running apps icons along with an app screenshot "card" above the icon. Tap-drag the app's -card- (NOT the icon) up and off the screen.

  • Running bapi in back ground

    hi all,
    i had to upload material master basic view, iam updating using bapi,
    i want to run this program in background. i am getting problem wen calling bapi. its not executing this bapi.
    wen i run the same program its working fine.
    could any body help me in this regard
    below is the code
    *& Report  ZTEST_BAPI_BASIC
    report  ztest_bapi_basic.
    types : begin of ty_mara,
            matnr type mara-matnr,
            mbrsh type mara-mbrsh,
            mtart type mara-mtart,
            meins type mara-meins,
            maktx type makt-maktx,
            end of ty_mara.
    data: begin of it_makt occurs 0.
            include structure bapi_makt.
    data end of it_makt.
    data:begin of it_ret occurs 0.
            include structure bapiret2.
    data end of it_ret.
    data : t_mara type standard table of ty_mara,
           st_mara type ty_mara.
    data: bapi_head like bapimathead,
          bapi_clientdata like bapi_mara,
          bapi_clientdatax like bapi_marax.
    selection-screen : begin of block b1 with frame title text-001.   "SELECTION SCREEN
    parameters: p_fnam like rlgrap-filename.
    selection-screen : end of block b1.
    at selection-screen on value-request for p_fnam.
      call function 'F4_FILENAME'                              "FUNCTION MODULE TO LOCATE THE FILE ON THE DISK
        exporting
          program_name  = syst-cprog
          dynpro_number = syst-dynnr
          field_name    = ' '
        importing
          file_name     = p_fnam.
    start-of-selection.
      perform upload.
      perform bapi.
    *&      Form  UPLOAD
          text
    -->  p1        text
    <--  p2        text
    form upload .
      data : filename type string.
      filename = p_fnam.
      call function 'GUI_UPLOAD'
        exporting
          filename                      = filename
         filetype                      = 'ASC'
         has_field_separator           = 'X'
       HEADER_LENGTH                 = 0
       READ_BY_LINE                  = 'X'
       HEADER                        =
        tables
          data_tab                      = t_mara
    EXCEPTIONS
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    endform.                    " UPLOAD
    *&      Form  BAPI
          text
    -->  p1        text
    <--  p2        text
    form bapi .
      sort t_mara by matnr.
      loop at t_mara into st_mara.
        perform conversion using st_mara-matnr changing  st_mara-matnr.
        bapi_head-material = st_mara-matnr.
        bapi_head-ind_sector = st_mara-mbrsh.
        bapi_head-matl_type = st_mara-mtart.
        bapi_head-basic_view ='X'.
        bapi_clientdata-base_uom = st_mara-meins.
        bapi_clientdatax-base_uom = 'x'.
        refresh it_makt.
        it_makt-langu = 'E'.
        it_makt-matl_desc = st_mara-maktx.
        append it_makt.
        clear it_ret.
        refresh it_ret.
        perform update_bapi  using bapi_head
                                         bapi_clientdata
                                         bapi_clientdatax .
        read table it_ret with key type = 'S'.
        if sy-subrc eq 0.
          commit work.
        else.
          call function 'BAPI_TRANSACTION_ROLLBACK'
                  IMPORTING
                    RETURN        =
        endif.
      endloop.
    endform.                    " BAPI
    *&      Form  CONVERSION
          text
         -->INPUT      text
         -->OUTPUT     text
    form conversion using input changing  output.
      call function 'CONVERSION_EXIT_ALPHA_INPUT'
        exporting
          input  = input
        importing
          output = output.
    endform.                    "conversion
    *&      Form  update_bapi
          text
         -->BAPI_HEAD         text
         -->BAPI_CLIENTDATA   text
         -->BAPI_CLIENTDATAX  text
    form update_bapi  using bapi_head bapi_clientdata  bapi_clientdatax .
      call function 'BAPI_MATERIAL_SAVEDATA' in background task as separate unit
        exporting
          headdata                   = bapi_head
         clientdata                 = bapi_clientdata
         clientdatax                = bapi_clientdatax
      FLAG_ONLINE                = ' '
      FLAG_CAD_CALL              = ' '
      NO_DEQUEUE                 = ' '
      NO_ROLLBACK_WORK           = ' '
      importing
         return                     = it_ret
       tables
         materialdescription        = it_makt
      append it_ret.
    endform.                    "update_bapi
    regards
    siva

    Hi,
    I'm a bit confused now - does the BAPI call work if you run it entirely in foreground or does it fail there too?
    You need to ensure your BAPI works correctly with the data you are passing to it - preferably in foreground so you can debug it and see what is happening.  If it throws errors there then add them to this thread.
    If it works in foreground then you probably need to schedule the job in background but as others have pointed out, you can't use the GUI_UPLOAD function to do this.
    Gareth.

  • Anyone having or had a problem with kernel_task running uploads in back ground and can't figure out what its doing

    My iMac is running kernel_task and using a lot of upload bandwidth. I talked to isp this morning he said that I was topping out on the upload side while download was normal. He also said that it started about 3 weeks ago but I've been looking and trying to remember what I did as far as installing or changing setting and I can't figure it out, also using a magicjack on computer but tried without it and still the same and its hard to use the phone when other party only gets every other 4 or 5 words. HELP PLEASE!! driving me crazy.

    You have something that is uploading data from your network, so you may have a runaway application doing this. If you quit all your running applications does the problem still exist? If so then you may have a corrupted system process.
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Create a new user account with admin status, then log out of your account and log into the new account. Does the problem still exist?
    Also, try basic repairs:
    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • Alv back ground execuion

    Hi,
    I want to run ALV in back ground.
    I have two check boxes in selection screen.
    One is for back griund execution and another is for direct execution.
    There will be data base updation if i run in back groud or direct execution.
    So how can i run program in back ground if click the check box.
    Rgds,
    Sunil.K

    When you are running the program in background, the default value of the checkbox should be X or you should create a varaint by clicking the checkbox. Then you need to schedule a background job with that variant. Database updation will happoen even if you schedule it in background.
    I hope it solves your problem, if not please revert.
    Best Regards,
    Vibha
    *Please mark all the helpful answers

  • How run the back ground jobs

    Hi Experts,
    I have one scenario .
    I have scheduled on program in back ground.
    now that in back . when i excute that back job program.
    I need to  tranfer that data to application server.
    please suggest me how to do this.
    Ramesh.
    thanks in advanice.

    there is a system variable sy-batch which recognises if the job is running in background or not..
    OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    IF sy-subrc NE 0.
    MESSAGE e001(zsd_mes).
    EXIT.
    ELSE.
    *---Data is downloaded to the application server file path
    LOOP AT it_tab2 INTO wa_tab2.
    TRANSFER wa_tab2 TO p_file.
    ENDLOOP.
    ENDIF.
    *--Close the Application server file (Mandatory).
    CLOSE DATASET p_file.

  • Back ground running of Standard reports

    Hi,
    I have some requirement in report processing. I need to run(in back ground) statndard structure reports for project def, WBS and activities and CM51 and CJI3. Then output should be saved in predefined folder in an excel format. The whole process of running and saving the report should be automated. And this job has to be run every night.
    I have checked the option of running in back ground for structure reports but variant selection and saving in destination folder should be automated. I could not find the option of running CM51 in back ground.
    Appreciate help in this regard
    Regards,
    Laxminarsimha

    You can try running of the program in the background - you will need to create a background job with the correct selection and display variants.
    Go to SE93 and check the program
    e.g. from SE93 enter CJI3 you will see the program is RKPEP003
    now create a background job for this program with correct variants
    Do the same for the other transaction

  • Field missing when running the KSB1 transaction in Back ground

    Hi,
    With the help of  Zreport am executing the KSB1 transaction in back ground and after execution of KSb1 am retrieving the report output and am displaying.
    Issue is when am running Zreport in back ground the the output of KSB1 is giving the output by hiding the last column, where as am running Zreport in foreground the output of KSB1 giving the output with out hiding last field. Please guide me why the variance is coming in output when am running the Zreport in background........ and please advise me to rectify the problem....

    In background it cant be displayed if report width is more than 255 chars. Check line size.
    Satya

Maybe you are looking for