Running WDA ABAP on my Enterprise Portal

I have two systems (Netweaver 2004s Java and Netweaver 2004s ABAP) running on two different computers. I have developed an ABAP WDA, tested it and works fine in my SE80->Test Application.
Question 1:
I want to run this now on my Enterprise Portal (Netweaver 2004s Java). Have any of you done this? If so, can you please send me a step-by-step procedure.
Question 2:
I am disappointed by the fact, that Netweaver 2004s ABAP does not have an Enterprise Portal unlike Java. Can anybody tell me if there is a workaround that I dont know of, so that I dont have to go through the process in Question 1 to see my WDA ABAP run on a Portal.
Thank you in advance for your time, effort and generosity to share your valuable knowledge. Its greatly appreciated!
Nagesh

Hi. You will need to set up a system configuartion in your portal to access the ABAP stack.
1) First you need to set up the portal so that it knows the system that you want to connect to. Here is the documenation for setting it up. Once you setup the system, you simply create an iView. When you create the iView it will ask you which system you want to connect to for this WDA app.
http://help.sap.com/saphelp_nw2004s/helpdata/en/5a/0339040c0b11d7b84800047582c9f7/frameset.htm
You will want to use the "template selection" at the appropriate point in the system config wizard. Also you probably want to use the "SAP system using dedicated application server"
2) The portal is implemented on the java stack only, there is not portal that runs on the abap stack. I'm not sure that SAP plans to create there own portal framework on the ABAP stack. Even the portal on the java stack was purchased.
Regards,
Rich Heilman

Similar Messages

Federated Portal - Issue running WebI and Crystal in Enterprise portal.

Hi All,
We have connected our BI portal to Enterprise Portal . The federation works fine for Bex 7.0 queries. But when we run WebI and Crystal Reports ...We get the following error
Portal Runtime Error
An exception occurred while processing your request
Exception id: 05:20_30/03/10_0027_1281950
See the details for the exception ID in the log file.
We looked in the log file and this is what we see.
"PortalRuntimeException: Exception in SAP Application Integrator occured: Missing Property 'ClassName' in property file for layer'BusinessObjects/SSOLayer'."
Others have posted the same question in forum but there is no answer. Could any of you resolve this issue??
Thank you in advance,
Aparna

Hi Hanif,
I'm working on federation between EP 7.4 and EP 7.0.
Do you have any links on FPN in EP7.4.
Thanks and Regards,
Pradeep

Displaying ABAP transaction In Enterprise Portal

Dear all,
We are having one Z-reports in CRM 4.0 .which we want to display in EP portal.
Is it possible??
What type of changes needed from ABAP and EP side.
with regards,
Rajesh C

Hi,
to achieve this functionality first we have to create a SAP transaction ivew and for then to let this iview communicate with R3 you have to create a system which can do this task. Please look at the below blog.
Create SAP Transaction iView using SAPGUI for Windows
and
Pass Parameter to ITS URL Upadated 21st June 2008
Regards,
Srinivas

Double stack BI and Enterprise portal for SSO

I am in the process of configuring a double stack BI and SAP Enterprise Portal. Both systems are residing on different domains. We want to utilize the standalone SAP Enterprise Portal for our BEx etc. For that I have exchanged certificates between the ABAP and the SAP Enterprise Portal systems and with the help of Support desk tool I have overcome the certificate issues. The RFC connection from ABAP and SAP Enterprise Portal works fine. The Support desk tool is complaining now about the prefix of these two servers. Also when I check the connection testing between these two systems all the messages are correct except for WEBAS connection it complains about the ping service which is already active on ABAP side. For Connectors it complains about SSO which is not detected/complained by the Support desk tool (0.426). I need your advice:
1. Either uninstall the JAVA instance of BI or
2. Make a Federated Portal network by making the BI JAVA as PRODUCER and the SAP standalone as CONSUMER.
The Support package levels are the same as EHP1 SP 7 of both the double stack BI and the standalone Enterprise Portal systems. The source of users are both local to the systems.

answered

Error while executing the BW template from Enterprise portal.

HI all,
i need a help in resolving the issue. when i am trying to run the template(WAD) from Enterprise portal i am facing an error.
the error message is as follows
cannot load query ''query name'' (data provider "DP_1":)
Notification Number RSBOLAP 013
please help me out in resolving the issue.

Hi Ganesh,
actually it the scenario is some this like this i have created an WAD with email as an button up on click on the button it will execute the BI Broad Casting Functionality
He have published the template on to portal, the template is executing fine in Enterprise portal but upon button click we are perfectly invoking the broadcasting functionality but i am unable to send mail when i am click on Execute button.
The functionality is working fine from BW system .please help me out in resolving the issue.
regards,
santosh

ABAP WD: Different display in Test window and enterprise portal

Hi,
I am using Table and TreeByNestingtable column in ABAP webdynpro(Basis 710 release). When I run the application using test, table captions are not in bold and there is no difference between TreeByNestingtable column and other columns in background color.
But when I display the same component in Enterprise portal using iview(EP 6), the table captions appear in bold and TreeByNestingtable column and other columns appear in different background color.
Has anybody encountered this issue? And how do we resolve it?
Regards,
Srini.

Please see OSS Note 903662 on restrictions and steps for running ABAP Web Dynpro in older releases of the portal. In particular you should disable the portal style sheet.

Running BDC in 'A' mode when called from Enterprise portal

HI All,
I have created a RFC which contains a BDC program that update data in SAP R/3. The RFC is called from Enterprise portal. Is it possible to run the rfc in A(all screen display) mode while calling from EP. I have tried it but it gives following 2 errors on EP
cm_no_data_received
rfc_error_communication
what changes i have to do so that i can run the BDC in 'A ' mode when called from Enterprise portal

it would not be related to EP administration issues but something to do with GUI usage. it is loggically fare enough not to give options of viewing the debug screen in as it might concern security issues inway the data could be edited at any point of time. Moreover the screens u see in R3 are ABAP but whereas in EP it is purely based on Java and the calls to SAP is done via JCO thus enabling ABAP functionalities in EP. Maybe for these technical reasons or constraints it wont be possibel to view the screen in EP eventhough u had ext.bp activated

SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP stack only

SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP Stack
Dear Portal Gurus,
we want to integrate SAP BW Bex Queries 7.3 into an Enterprise Portal 7.3 EP ABAP Stack only installation.
1) We have Done SSO between EP And BI System
2) System Object is Created
3) When we trying to create Iview of BEX 7.3 report, its executing that report on BI server, we don't have java stack on BI System
4) We have updated the required table in Bi system for executing the report on EP
5) RFC is OK, System Object Test is OK, Report is working independently from Business Explorer, but not working from EP
There no irj services available on BI system, as it is only ABAP stack.
Can anybody help us in achieving our requirement
Thanks in advance
Michael Wecker

Hi Michael,
To integrate portal with BI you need to perform BI Portal integration steps.
Refer to a document link below for guidance purpose.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?overridelayout=t…
Ensure that you have performed all these relevant steps.
Hope this helps.
Regards,
Deepak Kori

Problem in running a ABAP OLE Excel program in Web Portal

Hi,
Do anyone know how to solve the following problem ?
I have write a ABAP program in R/3 to use OLE to create a Excel file.
The program can run successful in front end workstation through SAPGUI.
However, when I run this ABAP program through the Web Portal by "Workset"
After I input the selection criteria and execute the program:
The statement "CREATE OBJECT EXCEL 'EXCEL.APPLICATION'" return with error "SY-SUBRC = 2".
How can I solve it ?
Can OLE Excel Abap Program can run on Web Portal through the "Workset" ?
Thanks so much,
Mark

Hi
check this might help
Re: Displaying Error while uploading Excel Sheets
jo

ABAP reports or BSPs for publishing R/3 data to Enterprise Portal

Dear Friends,
We have got scenario where we need develop a product.As part of that we have got some data in SAP R/3 that need to be published through Enterprise Portal.
Before me there are the below options.
1.To write ABAP reports and publish with the help of ITS.
2.To go for BSPs.(understood WAS should be > 6.10 )
3.To write some BAPIs and build the interface using portal as middleware.
Pl. suggest me which one would be best option considering If the reports contain some graphs also.
Your suggestions are greatly appreciated.
Thanks in advance
Mrutyunjay

Thanks Gopi for your inputs,
But I heard graphs in ABAP are very resource intensive.
I would request to through some light on presenting the data graphically through EP if the data is collected through BAPIs from SAP R/3.
Thanks in advance.
regards
Mrutyunjay

Microsoft Dynamics AX WebSession() is null in Enterprise Portal when running from a List Page.

Microsoft Dynamics AX WebSession() is null in Enterprise Portal (EP) when running from a List Page.
The WebSession() works for a detail page, but nor a list page in EP.
Does anyone know of a workaround to this issue?
Thanks.
Scott

Hello,
You should ask in the Microsoft Dynamics Community Forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

LSO CP installed on a non Enterprise Portal or ECC (ABAP+JAVA) server

Hello,
Has anyone installed the LSO CP on anything besides SAP Enterprise Portal or ECC (ABAP +JAVA)? If so what are the requirements for determining an approprate server for installation. How was this deployed without the use of the JAVA deployment tool? What issues if any did you encounter when performing this installation and deployment?
Cheers
Alan

Hi
CP needs to be installed on the J2EE engine.
The URL of the Content Player needs to be specified in the IMG.
Hope this helps
Best Regards
Reddy

ABAP Stack and the Enterprise Portal

If you install the Java and ABAP stack with the portal can you do full ABAP development on the portal?
I want to create a RFC that writes data to a ZTABLE - on the portal.
I would then send the data from the ZTABLE using a RFC connection between the portal and my backend system.
Thanks
Patrick

Hello Patrick,
yes you can do ABAP development on an ABAP-Stack of the portal Server.
I also use the "ABAP Stack" for Mobile-Infrastructure.
Creating a Z-Table and executing RFC's is no problem.
I think you will only use the ABAP-Stack for Customer-Development,so you only need to install the Basis Components and Plug-Ins on the ABAP-Stack.
Regards
Frank Brackmann
Message was edited by: Frank Brackmann

SSO (single sign on) on NetWeaver 7.0 Enterprise Portal based on spnego with Microsoft Active Directory

Hi,
we are using SAP Netweaver Enterprise Portal 7.0 (SP25) based on Windows 2008 R2/Oracle 11g.
When we setup the Portal, we used the UME of the ECC - ABAP.
The portal is used internally only.
Now we want to provide SSO.
User authenticate against Windows Active Directory (Windows 2003).
We thought SSO via spnego would be the best solution.
Any better alternates, we should use?
We are following the SAP documentation:
SAP-Bibliothek - Benutzerauthentifizierung und Single Sign-On
We still want to create users in ABAP and assign them the portal roles. LDAP access should only have read access, to verify the security token from Active Directory.
When we setup the portal from scratch using ABAP as its UME, in the system configuration, LDAP can't be selected/add as data source.
In case we understand the documentation correctly, we would now need to add LDAP via the configtool for read access.
What is not clear to us, when we active now LDAP via config tool, if we would now lose the ABAP connection.
Is there a tutorial for SSO Netweaver 7.0 EP, like for EP 7.3, available?
In 7.3 SSO is pretty simple to get it running, thanks to the many tutorials here and on the internet.
Thanks for your help.
Best regards
Carlos Behlau

Hi,
I was able to generate the key via ktab program.
But when I am enable SSO, nothing is happening when I try to log-on via SSO to the portal.
I installed WebDiag tool on the portal server and ran trace.
The users are located in domain: company.com of activate directory.
The Java AS are located in domain: sap.company.com of activate directory.
The sap.company.com domain acts as child of company.com.
When I check the WebDiag trace, I see for the SPNegoLoginModule - the entry "... no key (etype: 23) for realm sap.company.com available ..."
I would except company.com as realm key, as the keytabs have been generated on the domain controller of company.com.
Is it possible to get SSO with child domain running?
Based on the statement of the network folks, child and father domain having a trust.
Thanks for your help.
Best regards
Carlos

Performance issue of BI reports in SAP Enterprise portal

Dear Friends,
We have integrated BI reports with SAP Enterprise portal 7.0.Reports are running properly But the issue is reports are taking more time to dispsaly its content and leading it to performance effect.
In Bex ( BI side) reports performance is little better than SAP EP platform. BI Team also looking for ways to improve performance at BI side.
Could you please share your valuable ideas to improve the performance at SAP EP side also ..
Thanks and Regards
Ratnakar Reddy

Hi ratnakar,
The first step is to identify which component is causing the performance problem. Run your report in the portal but try appending the string &PROFILING=X in the end of the URL. This will generate BI statistics which you can use to see which component (Java stack, ABAP stack, Database) is causing the performance issue.
Hope this helps.

Running WDA ABAP on my Enterprise Portal

Similar Messages

Maybe you are looking for