Runtime analysis(SE30) for a Background job
Hi Experts,
How to get runtime analysis for a Background job in SE30 transaction. Please advise.
Thanks in advance,
Vivenchandar R
Measuring External Processes
Use
The runtime analysis allows you to switch into work processes that are already running and to measure the runtime of dialogs running in them as though they were running in the current session. You can have up to ten external sessions, which may be of any type for example, dialog, update, or spool. This runtime analysis variant is ideal for monitoring long-running background jobs.
Filename and Directory
If you do not want to use the default filename and directory to store files, you can change them using the profile parameter abap/atrapath. If the profile parameter does not contain an entry at all, an error occurs when you start the runtime analysis.
Similar Messages
-
Trigger substitution rule for a background job
Hi all,
I ve written a subroutine in Substitution rules for FI in GGB1 tcode for F110 transaction to replace the section code (bseg-secco) while posting a fi document.
but the substitution rule is not getting triggered as F110 runs a background job to post the document...
The substitution is active and the activation level is active all the time.
Could u please suggest how to get it triggered for a background job...Measuring External Processes
Use
The runtime analysis allows you to switch into work processes that are already running and to measure the runtime of dialogs running in them as though they were running in the current session. You can have up to ten external sessions, which may be of any type for example, dialog, update, or spool. This runtime analysis variant is ideal for monitoring long-running background jobs.
Filename and Directory
If you do not want to use the default filename and directory to store files, you can change them using the profile parameter abap/atrapath. If the profile parameter does not contain an entry at all, an error occurs when you start the runtime analysis. -
Can we perform runtime analysis(SE30) on Abap Webdynpro component..?
hi,
Greetings!!!
Can we perform runtime analysis(SE30) on Abap Webdynpro component..?
Thanks in Advacne.
Regards,
Kranthi.for sure !
have a look here [https://wiki.sdn.sap.com/wiki/display/WDABAP/Performance%20Tuning%20for%20SAP%20%20Web%20Dynpro%20ABAP|https://wiki.sdn.sap.com/wiki/display/WDABAP/Performance%20Tuning%20for%20SAP%20%20Web%20Dynpro%20ABAP] -
Workprocess for Infinite background job in ABAP
Dear all,
I have a background job which has an infinite loop i.e. WITHOUT any exit condition. The loop contains WAIT UPTO x mins statement.
So my query is if I run this program in background then will the Background Work process which executes this job, always be occupied and cant be used for other background jobs ? In other words, will I be wasting 1 BG workprocess for this job since it will never be freed to be used for other background jobs?
LOOP AT ITAB
WAIT UP TO x MINS.
ENDLOOP.
Requesting your expert insights .
Thanks in advance.
BR
NileshI am not so sure if this is correct. To my knowledge, BTC processes, as opposed to DIA, never perform "roll out" (e.g. during an RFC call) but just wait until processing continues. I just made a quick test in NW 740 release, there the BTC process remains occupied by my job when it does WAIT UP TO xxx SECONDS. So you occupy one BTC process as long as your job runs.
Please try out yourself and then award points to whoever is right, please.
Regards,
Alex -
Trigger a substitution rule for a background job
Hi all,
I ve written a subroutine in Substitution rules for FI in GGB1 tcode for F110 transaction to replace the section code (bseg-secco) while posting a fi document.
but the substitution rule is not getting triggered as F110 runs a background job to post the document...
Could u please suggest how to get it triggered for a background job...Hi,
Please mainatain another substitution rule.
PREREQUISTE : 40(POSTING KEY )=SPARE PARTS(gl) and 50(posting key )=Inventory write off
Sustitute : Dtype = VA
Regards
jabeen -
Reg Super user for schedule background Jobs
Hi Experts,
I have created new user copied from DDIC with the same authorization. This is for scheduling Background Jobs. Now all the standard background Jobs are running fine. After scheduling the Jobs I have changed to system user. Now for audit purpose I need SAP note to do same. Please help me to get the sap note for the same. Please respond ASAP. treat this is as high priority.
Thanks & Regards,
Haseem.HI,
It is not necessary for user having SAP_ALL authorization under which background job is running.
Define specific users to use for background processing. Define them as system users (non-dialog) and give them only the necessary authorizations that are needed for the executed programs
check http://help.sap.com/saphelp_nw04/helpdata/en/db/f6f3393bef4604e10000000a11402f/frameset.htm
also check Note 101146 - Batch: authorization object S_BTCH_JOB, S_BTCH_NAM
regards,
kaushal -
Can we change the selection criteria for RV60SBAT Background Job for Billin
We have a requirement to add a new selection criteria for RV60SBAT Background Job for Billing. We want to process back order invoices first. So we want a specific background job to select these. So we want to select any orders that are eligible to be invoiced where order date < the date of background job(r sy-datum ). Any ideas where we can introduce this logic for selection criteria?
Thanks,
MattHi Matt
For your requirement , copy the standard RV60SBAT program to Z program and in that copied RV60SBAT program , maintain the logic that the backorder invoices should be first processed.Then after that regular background job for billing should take happen .Then your requirement can be fulfilled
Regards
Srinath -
Program not in Library -- In ABAP Runtime Analysis SE30.. Plz Guide me guys
Dear all,
I have to execute one report program in SE30 ABAP Runtime Analysis tool.
So I have entered my program name in the SE30 but I have got 1 error " Program ( pgm name ) not in Library ".
Guys plz guide me on this asap.
Edited by: PI User on Nov 26, 2010 11:14 AM
Moderator message: too basic, too much SMS speak, too much "asap", thread locked, points removed.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
Edited by: Thomas Zloch on Nov 26, 2010 12:33 PMHi
The error message is clear: the program you're trying to test by SM30 is not SAP (your SAP system of course)
Now try to check if you can see that program by SE38, but if you think the program is in SAP, prehaps you're running SM30 in another system:
For example:
the program was created in development system and you run SM30 in quality and that program hasn't been transported yet: so the program is in development but not in quality.
Max -
Is there a system variable indicator for a background job?
Hello all.
Is there a way for me to know, in the ABAP program, at runtime, whether the program is beeing run by a background job or not?
Thanks!Hi
check
SY-BATCH for Program running in background cehck in SYST table for all.
Thanks & Regards,
Chandralekha. -
Hi BW Gurus,
i have my query based on a Virtual cube for BCS. I ran the query and its taking 14 minutes to give me the result. From RSRT i got the name of the program which run in the backend to generate the report. I took that program name and put it in SE 30 Runtime analysis.
<b>ABAP</b> - 26,100 (microseconds)--- 71.4% (I have some user exit variables).
<b>DATABASE</b> - 4678 (microseconds)----12.8% of total runtime
<b>System</b> 5799 (microseconds)--15.8% of total runtime
but the problem is I am using the same user exit variables in other queries and their response time is 3 seconds to 4seconds.
can somebody help in where is the exact problem
Q2) How to check that which SQL statements or database table is taking more time. where exactly we must put the breakpoint....
i am not at all good in ABAP.
Thanks will assign full pointsHi A.H.P,
thanks for the reply ...using ST05 do i have to first execute the query and then activate the trace or I can do it any time and later deactivate it.
Also the exit variable is that whatever the period user enters it will give the starting period of that Quarter. Like if user gives 005.2007 the data will be calculated for
period 004 (since its the starting point of the Quarter 2 [4,5,6] ) and period 005.
Yes it is derived from the other variable so the range I give is this
custom exit.. to... 0GMTO(which is fiscal year/period).
Can you please give your inputs Will assign full points -
Dynamic variants for a background job
Hi,
I need to set up a background job for a dynamic variant. To elaborate my selection screen has date ranges which need to change dynamically , if the job is secheduled on weekly basis the selection date range should change automatically in the variant. I got to know that the same is possible through the table TVARV. Can I know about the method of setting up the same?
Thanks,
ShailajaYou can set a dynamic date to today date or some other date without using the table TVARV.
To set the dynamic date:
Save variant on the selection screen.
In the vairant screen, press F4 against your field in the column "Selection Variable"
Select D here.
In the column Name of the variable, press F4 to have the list of the possible rules.
Here you can select "Current date - xxx,current date + yyy" if you want to have certain period.
When you select this system will pop up to put the values for XXX and YYY.
Say for last 7 days, you can set the values XXX as 7 and YYY as0.
But the best way is to change the program, if possible, and fill the select option in the intialization event.
Regards,
Naimesh Patel -
Adding steps for a background job
Hello All,
I am creating a background job through a program and submitting another program for running in the background.
I would like to add steps for the backgound job which I created trough my program.
So background job will have different steps for the same program which I submitted.
Could any one of you help me on how to add steps for background job which is already running.
Thanks and Regards,
VijayHi Naimesh,
Thanks for the Reply.
Sorry for replying late.
The problem I am facing is we need only one job with multiple step .
for example if we have job named BCKGRD.
Under this job we need to create Step 1, Step 2, Step 3..
Regards,
Vijay -
API for scheduling background jobs
Hello friends,
What is the API provided by R/3 to schedule background jobs, apart from the internal transactions, sm36 ?
regards,
Tanmay.Hi,
There are FMs to create and schedule jobs instead of manually going to transaction SM36.
JOB_OPEN (create a job)
JOB_SUBMIT (attach program to be scheduled and set other scheduling parameters)
JOB_CLOSE (finally release it for use)
Hope your question is answered...
Regards, Tapas
<Pls reward if useful or answered> -
CCMS Monitor to Pager for Failed Background Jobs
Hello Experts,
I am currently leveraging Central CCMS monitoring to alert us via email whenever a background job fails in production using the MTE Class R3BPServerSpecAbortedJobs.
I am trying to find a way that I can tweak the monitor to alert me ONLY when specific background jobs fail.
We want this alert to notify the oncall pager only when a handful of critical jobs fail. Does anyone know how I can delimit this MTE?
For example, we will be creating jobs that begin with Z_ALERT* that I will tie to an auto-react method that will email a pager.
Thanks in advance.
BillHi Sundara.
From following link, you can download step by step setup information.
So please check following documents.
http://www.service.sap.com/bpm
=>Media Library=>Technical Information
=>1. Business Process Monitoring - Setup Roadmap
=>2. Setup Guide - Business Process Monitoring
Before you start setup, I recommend you to check
SAP Notes 521820 to ensure whether you already fulfill
prerequestions.
Basically what you have to do is following.
1. Describe your business process under following area.
(T-CD DSWP =>Solution Landscape =>Solution landscape maintenance)
2. Setup BPMon session.
(T-CD DSWP =>Operation Setup => Solution Monitoring =>
Business Process Monitoring)
in BPMon session, select job monitoring. And define background
job that you want to monitor.
In BPMon job monitoring, you can monitor, cancel, delay, duration,
unexpected parallelization, also job log and so on.
I hope this information help you.
Best Regards
Keiji Mishima -
How to check the ALV output for the background job
Hi Guru,
We are having a cutomized report which will display the result like a ALV report.
We configured it as an background job, after the completion of the background job, it will send the result to the SPOOL, and we can use SP02 to check the output,
But it is not easy for user to directly check the result easily, is there an method we can save it as an spreadsheet and send the output to a specific location or mailbox and then user can check it easily
thanks,In SM37 ,select the Job > Spool > Select Spool No > Display Contents > Here it will show you the Output of the Report.Now select Ctrl +Shift + F12 , it will ask you to save the Spread sheet in specified location.
Best Regards,
Ankur
Maybe you are looking for
-
Microphone problem on Windows XP running on Macbook Pro
I just bought a Macbook Pro with a built-in Realtek HD audio card, and I have a problem using the microphone on the Windows side (I've installed via Bootcamp a Windows XP Home edition service pack 2). For some reason Windows doesn't recognise the mic
-
Screen Saver Photo Slideshow: how to advance to the next or previous photo?
I am a new iMac convert and we love using the beautiful 27" monitor to view our family photos. Is there a way to go backwards to the previously displayed photo by using a key on the keyboard? On Windows PCs, the right/left directional arrows would al
-
Securing Web Service--Beginner question
Hi-- I am trying to follow the document "Securing WelbLogic Web Service 10g Release 3" and can't get past the initial steps to verify that my service has been deployed with the Wssp1.2-2007-Wss1.1-UsernameToken-Plain-X509-Basic256.xml policy I have a
-
The history sidebar does not automatically come up when I start Firefox.
I always had the history sidebar set to appear when Firefox booted. Now I have to manually open it each time. Why?
-
Tried uninstall, reboot. 3.6.25 reinstalled itself on reboot. Any ideas?