Runtime Error '1004':, Method 'Intersect' of object '_Global' failed

Hello
I am getting a runtime error 1004, can someone tell me why?  I am getting the runtime error on the first Application.Intercept statement.
Thank you for your help!
smsemail
Private Sub Worksheet_Change(ByVal Target As Range)
Application.ScreenUpdating = False
Application.DisplayAlerts = False
If Not Application.Intersect(Target, Me.Range("A:A")) Is Nothing Then
lastRow = ActiveSheet.Range("A" & Rows.Count).End(xlUp).Row
If lastRow < 17 Then
Exit Sub
End If
If lastRow > 67 Then
lastRow = 67
End If
Else
Exit Sub
End If
If Not Application.Intersect(Target, Me.Range("A17:A" & lastRow)) Is Nothing Then
Application.EnableEvents = False
If Application.WorksheetFunction.CountA(Worksheets("RIPS").Range("A17:A67")) = 0 Then
Exit Sub
End If
If Application.WorksheetFunction.CountA(Worksheets("RIPS").Range("B17:B67")) = 0 And _
Application.WorksheetFunction.CountA(Worksheets("RIPS").Range("C17:C67")) = 0 And _
Application.WorksheetFunction.CountA(Worksheets("RIPS").Range("D17:D67")) = 0 Then
Exit Sub
End If
If CmdExecute = True Then
Exit Sub
End If
If CmdClear = True Then
Exit Sub
End If
Worksheets("RIPSSummary").Activate
lastRow = ActiveSheet.Range("A" & Rows.Count).End(xlUp).Row
Set SourceRange = Application.Intersect(Range("A2:A" & lastRow), ActiveSheet.UsedRange)
MsgBox "Source Range: " & SourceRange
Worksheets("RIPS").Activate
lastRow = ActiveSheet.Range("A" & Rows.Count).End(xlUp).Row
Set TargetRange = Application.Intersect(Range("A17:A" & lastRow), ActiveSheet.UsedRange)
MsgBox "Target Range: " & TargetRange
Exit Sub
wsDeleted = False
For Each acell In SourceRange.Cells
RecordFound = True
If Not IsEmpty(acell.Value) Then
Set C = TargetRange.Find(acell.Value, LookIn:=x1values)
If C Is Nothing Then
RecordFound = False
End If
If RecordFound = False Then
wsDeleted = True
For Each Worksheet In Worksheets
If Worksheet.Name = acell.Value Then
Worksheet.Delete
End If
Next Worksheet
End If
End If
Next acell
If vbKeyDelete Or _
vbKeyClear Then
r = lastRow
Do Until r < 17
If Worksheets("RIPS").Range("A" & r).Value = "" Then
Rows(r).Delete
End If
r = r - 1
Loop
End If
Application.EnableEvents = True
End If
Application.ScreenUpdating = True
Application.DisplayAlerts = True
End Sub

It should work but maybe there's something about your workbook we can't see.
In passing generally best not to disable screenupdating, alerts or events unless need to do so. More importantly though you should ensure they always get reset. As written you have several Exit Sub's before any code that resets them. Also in case of an error
consider resetting them in an error handler.

Similar Messages

  • Run-time error '1004' -- Method 'Container' of object '_Workbook' failed

    Dear All,
    One of our users is getting the following Microsoft Visual Basic error while running the report S_ALR_87013614.
    Run-time error '1004'
    Method 'Container' of object '_Workbook' failed.
    I have searched the forum posts for help. But I only found some details related to Run-time error 1004 related to some excel file security but not related to "Method 'Container' of object '_Workbook' failed".
    Could anyone please tell me how this error can be eliminated for the user?
    Regards,
    Lakshmi.

    Dear Arpan,
    We too observed a few PIDs along with the one that you have mentioned but they make no difference. Some users who has the PID G_RW_DOCUMENT_TYPE set with some value are getting the report.
    Upon further searching we are assuming that it could be an issue with the Microsoft applications or macro settings of the user. But not sure about it.
    Regards,
    Lakshmi Venigala.

  • VBA Runtime Error 1004 "Application-defined or Object-defined error"

    I have code VBA code written in MS Access 2010 (.mbd file) to write data into an Excel file (.xls file). Below is the code to write data into that excel file. When you run this code, it always throws Error#1004 "Application-defined or Object-defined
    error". When you debug the code (F8) or run it (F5), it runs absolutely fine with out any issues. I am still not able to figure it out on what exactly the issue is. This code works fine when executed in MS Access 2007.
    Below is thr code that's getting executed and when it fails, the focus is set on the 3rd last line of the code marked in double astriek mark.
    Sub PopulateReport(appExcel As Object, testcam)
    Dim Site As String, intRec As Integer, i As Integer, cnt As Integer, intRecSet As Integer, cntr As Integer
    Dim F1 As String, F2 As String, F3 As String, F4 As String, F5 As String, F6 As String, F7 As String
    Dim F8 As String, F9 As String, F10 As String, F11 As String, F12 As String, F13 As String, CAMDate As Date
    Close
    i = 0
    cnt = 0
    cntr = 0
    Set cnn = CurrentProject.Connection
    rec.Open "SELECT * FROM Site", cnn, adOpenStatic, adLockPessimistic
    rec.MoveLast
    rec.MoveFirst
    intRec = rec.RecordCount
    Do Until cnt = intRec
    rec.MoveLast
    rec.MoveFirst
    rec.Move cnt
    Site = rec(4)
    Select Case Site
    Case "Fort Worth"
    cntr = 0
    recset.Open "SELECT * FROM Employee", cnn, adOpenStatic, adLockPessimistic
    recset.MoveLast
    recset.MoveFirst
    intRecSet = recset.RecordCount
    appExcel.Application.Goto Reference:="START_FW_CL"
    Do Until cntr = intRecSet - 1
    appExcel.Selection.EntireRow.Copy
    appExcel.Selection.EntireRow.Insert
    cntr = cntr + 1
    Loop
    appExcel.Application.CutCopyMode = False
    appExcel.Application.Goto Reference:="START_FW2_CL"
    go = appExcel.Application.Range("START_FW2_CL")
    cntr = 1
    With appExcel.Worksheets("Accts. > Clearing").[START_FW2_CL]
    Do Until recset.EOF
    **.Offset(cntr, 0) = recset(0)**
    .Offset(cntr, 1) = recset(1)
    .Offset(cntr, 2) = recset(2)
    End Sub

    What's wrong about it? It can only copy what you chose to have in the recordset. If you only want some fields or fields in a different order, replace
    SELECT * FROM  with
    SELECT Field1, Field2, etc
    CopyFromRecordset is bay far the best method and runs much faster.
    Rod Gill
    Author of the one and only Project VBA Book
    www.project-systems.co.nz

  • Run-time error '1004' Application-Defined or object-defined error

    Hello friends,
    My requirement is to make the cells under Columns Actual, forecast and target (Dimesnion Category) Locked.
    I've used various methods like GetOnlyRange but it didnt work.
    Now, i've selected all the cells of the sheet, where user can input and made them unlocked. ( from Right-click>FormatCells>Protection tab-->Locked checkbox unchecked)
    Then, go to "review" tab, click "Allow Users to edit Ranges",-> Protect Sheet---> ticked "Unlocked Cells"
    Then go to WorkBook Options and set a password for the worksheet.
    But on expand, I'm facing Run-time error '1004' Application-Defined or object-defined error.
    Please help.
    Please help.

    Hi,
    I think that  is VBA Runtime error, you can fix these errors by downloading in various sites.
    http://www.articlesbase.com/data-recovery-articles/vba-runtime-error-1004-application-defined-or-object-defined-error-fix-these-errors--1339060.html
    You can try with the above link.  I hope this could solve your problem.
    Regards,
    B.S.RAGHU

  • BExAnalyzer: SAPBEXsetFilterValue and others: runtime error 1004, Intersect

    Hello there,
    any idea why e.g. SAPBexSetFilterValue does not work any more in BI7.0?
    We need to set serveral filter values by macro which worked like a charme in BW3.5.
    Now, all functions that have to to with filter values cause a runtime error 1004, saying that the intersect-property of the application object could not be assigned.
    Does anyone have the same problem or even a solution or just a snipplet of working code (set or get a filter value).
    As far as I've found out, the drill-down-functions may cause the same problem.
    Any hints are welcome. Thank you.

    Sure, here it is. Simple enough, but not working no matter what I try:
    Dim result As Long
        ' last parameter (atCell) left out. Cursor placed on filter cell for costcenter. If you have a look
        ' at the API, then the ActiveCell will be used in that case. This worked quite good in BW 3.5
        result = Run("SAPBEXSetFilterValue", "DE00DECCR10000", "0HIER")
        ' The statement above will call the following code inside the API:
        '    Public Function SAPBEXsetFilterValue(intValue As String, Optional hierValue As String, Optional atCell As Range) As Integer
        '      extErrorBegin ("3.x API SAPBEXsetFilterValue called")
        '      If atCell Is Nothing Then Set atCell = Application.ActiveCell
        '      SAPBEXsetFilterValue = paddin.SAPBEXsetFilterValue(ActiveWorkbook.Name, intValue, hierValue, atCell)
        '      extErrorEnd
        '    End Function
        ' No matter if I use my statement (Run(...)) or call the API statement directly, I always receive a runtime error '1004',
        ' saying that the intersect-property of application-object could not be assigned.
    SAPBEXSetFilterValue worked like a charme in BW3.5. We used it in several workbooks for automation and this becomes a really big problem now in BW7.0.
    Any help/idea welcome!

  • Runtime Error 1004

    I have a workbook with VBA and I am getting a 'Run-time Error 1004' and when I hit the debug the process stops at below lines of codes:
    ' Insert blank rows, one to hold each period and one for the total line
        With resultArea.Cells(RowNum, KeyFigCol - 1)  {it says Application defined or Object defined error}
        If .Value <> "" Then
    I saw other threads for this error and I checked the OSS-429183. Also my macro>>security is set to low.
    Any suggestions? Plus I am getting this error only in dev environment, stage & production work fine. I have verified the VBA code and they all have same code.

    Hi All, I still have this problem. I have the same VBA code in all the systems, but it gets error in development system only. its working fine in other systems. That's what breaks my head:(
    Any suggestions. I have attached my VBA code.
    '* Variable Declarations
      Dim Column As Integer
      Dim StrPos As Long
      Dim TempStr As String
      Dim RowNum As Integer
      Dim StrRowNum As Integer
      Dim EndRowNum As Integer
      Dim EndColNum As Integer
      Dim KeyFigCol As Integer
      Dim DelStrCol As Integer
      Dim LabelPos As Integer
      Dim ActiveCellSave As String
      Dim MonthFlag As String
      Dim MonthFlagPrev As String
      Dim MonthColStr As Integer
      Dim MonthColEnd As Integer
      Dim MonthCol1st As Integer
      Dim MatMonRow As Integer
      Dim ColPrjAvl As Integer
      Dim ColTopGrn As Integer
      Dim ColTopYel As Integer
      Dim ColTopRed As Integer
      Dim ColRmdRpl As Integer                   '001A
      Dim ColMaxQty As Integer
      Dim ColRplQty As Integer
      Dim First As Boolean
      Dim NumPeriods As Integer                  '001A
      Dim UsgPerDay As Integer                   '001A
      Dim StartTime
      Dim EndTime
    ' Check the query id to determine which sheet to activate
    If queryID = "SAPBEXq0016" Then      'Monthly Query
      'Application.ScreenUpdating = False
    'Set sheet "Inventory Montly Analysis" to active
      Sheets(3).Activate
      NumPeriods = 13                              '001A
    '* 001A: Set "Inventory Weekly Analysis" to active
    ElseIf queryID = "SAPBEXq0018" Then  ' Weekly query
      Sheets(4).Activate
      NumPeriods = 24
    '* 001A: Set "Inventory Replenishment" to active
    ElseIf queryID = "SAPBEXq0017" Then  ' Replenishment Detail query
      Sheets(6).Activate
      NumPeriods = 0
    Else
      Exit Sub
    End If
    '* 001A: End of new code
    '* Initialization Routines
      First = True
    ' For performance testing, save off the start time of the macro
      StartTime = Time
    ' Save off the current cell location so that we can restore that location
    ' when formatting is compelte
      ActiveCellSave = ActiveCell.Address()
      If ActiveCell.Value <> "No applicable data found." Then
    ' Determine the First Row in the spreadsheet where query results are displayed
    ' The first row will be stored in variable RowNum
      TempStr = resultArea.Address(RowAbsolute:=False, ColumnAbsolute:=False)
      StrRowNum = 0
      Do While StrRowNum = 0
        StrRowNum = Val(TempStr)
        If StrRowNum = 0 Then
          TempStr = Mid(TempStr, 2, 20)
        End If
        If TempStr = "" Then
          Exit Do
        End If
      Loop
    ' Determine the Last Row in the spreadsheet where query results are displayed
    ' The last row will be stored in variable EndRowNum
      TempStr = resultArea.Address(RowAbsolute:=False, ColumnAbsolute:=False)
      StrPos = InStr(TempStr, ":")
      TempStr = Right(TempStr, Len(TempStr) - StrPos)
      EndRowNum = 0
      Do While EndRowNum = 0
        EndRowNum = Val(TempStr)
        If EndRowNum = 0 Then
          TempStr = Mid(TempStr, 2, 20)
        End If
        If TempStr = "" Then
          Exit Do
        End If
      Loop
    ' Determine the Last Column in the spreadsheet where query results are displayed
    ' The last column number will be stored in EndColNum
      TempStr = resultArea.Address(RowAbsolute:=False, ColumnAbsolute:=False, ReferenceStyle:=xlR1C1)
      StrPos = InStr(TempStr, ":")
      If StrPos > 0 Then
        TempStr = Right(TempStr, Len(TempStr) - StrPos)
        StrPos = InStr(TempStr, "C")
        If StrPos = 0 Then
          EndColNum = 255
        Else
          TempStr = Right(TempStr, Len(TempStr) - StrPos - 1)
          EndColNum = Val(TempStr)
        End If
      End If
    ' Clear all of the old contents below the query result area
      TempStr = Format(EndRowNum + 1) + ":" + Format(65536)
      ActiveSheet.Rows(TempStr).Select
      Selection.Clear
    ' Determine the location of various key figure columns needed in subsequent processing
      KeyFigCol = 0
      For Column = 1 To EndColNum
    ' Find the start column for the key figures - Indicated by the first column
    ' with a dash "-" character in it.
        If InStr(resultArea.Cells(1, Column).Value, " - ") <> 0 Then
          If KeyFigCol = 0 Then KeyFigCol = Column
        End If
    ' Find the Projected Available Column
        If (ColPrjAvl = 0) And (InStr(resultArea.Cells(1, Column).Value, "Proj") <> 0) Then
          ColPrjAvl = Column
        End If
    ' Find the Top of Green Column
        If (ColTopGrn = 0) And (InStr(resultArea.Cells(1, Column).Value, "Top of Green") <> 0) Then
          ColTopGrn = Column
        End If
    ' Find the Top of Yellow Column
        If (ColTopYel = 0) And (InStr(resultArea.Cells(1, Column).Value, "Top of Yellow") <> 0) Then
          ColTopYel = Column
        End If
    ' Find the Top of Red Column
        If (ColTopRed = 0) And (InStr(resultArea.Cells(1, Column).Value, "Top of Red") <> 0) Then
          ColTopRed = Column
        End If
    ' Find the Recommended Replenishment Quantity
        If (ColRmdRpl = 0) And (InStr(resultArea.Cells(1, Column).Value, "Recommended Replenishment Qty") <> 0) Then
          ColRmdRpl = Column
        End If
    ' Find the Usage Per Day
        If (UsgPerDay = 0) And (InStr(resultArea.Cells(1, Column).Value, "Usage Per") <> 0) Then
          UsgPerDay = Column
        End If
    ' Find the Maximum Order Column
        If (ColMaxQty = 0) And (InStr(resultArea.Cells(1, Column).Value, "Maximum Order Quantity") <> 0) Then
          ColMaxQty = Column
        End If
    ' Find the Recommended Replenishment Column
        If (ColRplQty = 0) And (InStr(resultArea.Cells(1, Column).Value, "Recommended Replenishment") <> 0) Then
          ColRplQty = Column
        End If
      Next Column
    '* Begin of main formatting loop
    '* Logic for Recommended Repl Highlighting
      If NumPeriods = 0 Then
    ' Highlight the Recommended Replenishment Quantity
        For RowNum = 2 To EndRowNum
          If resultArea.Cells(RowNum, ColRplQty).Value > resultArea.Cells(RowNum, ColMaxQty).Value Then
               resultArea.Cells(RowNum, ColRplQty).Interior.ColorIndex = 7  'Highlight Red
          End If
        Next RowNum
    '* Logic for Monthly and Weekly Queries
      Else
    ' Work from the bottom up, inserting new lines and folding the keyfigures
    ' downward into one row for each month
      For RowNum = EndRowNum To 2 Step -1
    ' Insert blank rows, one to hold each period and one for the total line
        With resultArea.Cells(RowNum, KeyFigCol - 1)  This is where it stops & gives Runtime Error 1004
        If .Value <> "" Then
    ' For the bottom-most characteristic row, we must cut and paste differently to ensure
    ' the cells formats are properly pasted in the new rows
        If First Then
          TempStr = Format(RowNum) + ":" + Format(RowNum + NumPeriods)
          resultArea.Rows(TempStr).Select
          Selection.Insert Shift:=xlDown
          resultArea.Rows(RowNum + NumPeriods + 1).Select
          Selection.Cut
          resultArea.Rows(RowNum).Select
          ActiveSheet.Paste
          First = False
    ' If this is the first characteristic record, and it resides in row 2, then we know that the
    ' query only has one row of data - special formatting is required in this situation
          If RowNum = 2 Then
            resultArea.Cells(2, 1).Select
            Selection.Copy
            Range(ActiveSheet.Cells(StrRowNum + 2, 1), ActiveSheet.Cells(EndRowNum + NumPeriods, KeyFigCol - 1)).Select
            Selection.PasteSpecial Paste:=xlFormats, Operation:=xlNone, SkipBlanks:= _
                                   False, Transpose:=False
          End If
    ' Not the first row, use normal processing
        Else
          TempStr = Format(RowNum + 1) + ":" + Format(RowNum + NumPeriods)
          resultArea.Rows(TempStr).Select
          Selection.Insert Shift:=xlDown
        End If
    ' As we insert rows for each characteristic row, we need to adjust the end row
    ' number accordingly
        EndRowNum = EndRowNum + NumPeriods
    ' Initialize variables used for each set of month processing
        MatMonRow = RowNum + 1
        MonthFlagPrev = ""
        MonthFlag = ""
        MonthColStr = 0
    ' Scan key figure column headings from left to right, looking for changes in month
        For i = KeyFigCol To EndColNum + 1
    ' Get the month text for each column
          MonthFlag = ""
          TempStr = resultArea.Cells(1, i).Value
          MonthFlag = Mid(TempStr, InStr(TempStr, "-") + 1, 15)
    ' If we move into a new month, then copy and paste the previous month downward
          If ((MonthFlag <> MonthFlagPrev) And (MonthFlagPrev <> "")) Or (i = EndColNum + 1) Then
            If DelStrCol = 0 Then DelStrCol = i + 1     ' Capture last key figure of first month
            If i = EndColNum + 1 Then i = i + 1         'For results row, need to extend by one
    ' Copy and paste values for previous month
            Range(resultArea.Cells(RowNum, MonthColStr), resultArea.Cells(RowNum, i - 1)).Select
            Selection.Copy
            resultArea.Cells(MatMonRow, MonthCol1st).Select
            ActiveSheet.Paste
    ' Paste the Month text into the row heading
            resultArea.Cells(MatMonRow, MonthCol1st - 1).Value = MonthFlagPrev
            If MonthFlagPrev = " Average Result" Then
              Range(resultArea.Cells(MatMonRow, MonthCol1st - 1), resultArea.Cells(MatMonRow, EndColNum)).Select
              Selection.Interior.ColorIndex = 36
            End If
            With resultArea.Cells(MatMonRow, ColPrjAvl)
            If .Value >= resultArea.Cells(RowNum, ColTopGrn).Value Then
               .Interior.ColorIndex = 43   'Green Green
            ElseIf .Value >= resultArea.Cells(RowNum, ColTopYel).Value Then
               .Interior.ColorIndex = 14   'Green
            ElseIf .Value >= resultArea.Cells(RowNum, ColTopRed).Value Then
               .Interior.ColorIndex = 44   'Yellow
             Else
               .Interior.ColorIndex = 7  'Red
            End If
            End With
            MonthColStr = i
            MatMonRow = MatMonRow + 1
          End If
    ' Set variables on first pass through
          If MonthColStr = 0 Then
            MonthColStr = i
            MonthCol1st = i
            MonthFlagPrev = MonthFlag
          End If
    ' Capture the previous month text
          If MonthFlagPrev <> "" Then
            MonthFlagPrev = MonthFlag
          End If
        Next i
    ' Clear out the key figure data at the lowest characteristic level
        Range(resultArea.Cells(RowNum, KeyFigCol), resultArea.Cells(RowNum, EndColNum)).Select
        Selection.ClearContents
        End If
        End With
        Next RowNum
    ' Strip out the month text from column headings
        For i = KeyFigCol To DelStrCol
        LabelPos = InStr(resultArea.Cells(1, i).Value, "-")
          If LabelPos > 1 Then resultArea.Cells(1, i).Value = _
                               Left(resultArea.Cells(1, i).Value, LabelPos - 1)
        Next i
    ' Remove Extraneous columns (months 2-12)
        Range(resultArea.Cells(1, DelStrCol - 1), resultArea.Cells(EndRowNum, EndColNum + 1)).Select
        Selection.Clear
    ' Format Column Headings with appropriate column widths and heights
        resultArea.Rows(1).Select
        With Selection
            .HorizontalAlignment = xlLeft
            .VerticalAlignment = xlCenter
            .WrapText = True
            .Orientation = 0
            .AddIndent = False
            .IndentLevel = 1
            .ShrinkToFit = False
            .MergeCells = False
            .RowHeight = 31.5
        End With
    ' 001A: Add empty cells for Recommended replenishment
            If ColRmdRpl <> 0 Then
              For i = 2 To EndRowNum
                If resultArea.Cells(i - 1, 1) = "" Then
                  Range(resultArea.Cells(i, ColRmdRpl), resultArea.Cells(i, ColRmdRpl + 4)).Insert Shift:=xlToRight
                End If
              Next i
              Columns(ColRmdRpl + 5).Copy
              Range(Columns(ColRmdRpl), Columns(ColRmdRpl + 4)).PasteSpecial Paste:=xlFormats, Operation:=xlNone, SkipBlanks:= _
                False, Transpose:=False
              Application.CutCopyMode = False                     
            If UsgPerDay <> 0 Then
              For i = 2 To EndRowNum
                If resultArea.Cells(i - 1, 1) = "" Then
                   resultArea.Cells(i, UsgPerDay).Insert Shift:=xlToRight
                End If
              Next i
              Columns(ColRmdRpl + 5).Copy
              Range(Columns(ColRmdRpl), Columns(ColRmdRpl + 4)).PasteSpecial Paste:=xlFormats, Operation:=xlNone, SkipBlanks:= _
                False, Transpose:=False
              Application.CutCopyMode = False
            End If
            For i = 3 To EndRowNum
              If resultArea.Cells(i - 1, 1) <> "" Then
                 Range(resultArea.Cells(i, ColRmdRpl + 1), resultArea.Cells(i + NumPeriods - 1, ColRmdRpl + 4)).Select
                 Selection.FillDown
                 Range(resultArea.Cells(i, UsgPerDay), resultArea.Cells(i + NumPeriods - 1, UsgPerDay)).Select
                 Selection.FillDown
              End If
            Next i
    ' Remove Extraneous columns (months 2-12)
              Range(resultArea.Cells(1, DelStrCol - 1), resultArea.Cells(EndRowNum, EndColNum + 1)).Select
              Selection.Clear
            End If
    ' 001A: End of new code
        End If
        End If
        Columns("A:BA").ColumnWidth = 10
        resultArea.Columns.AutoFit
    ' Set Zoom level at 75%
        ActiveWindow.Zoom = 75
    ' Restore the active cell
        Range(ActiveCellSave).Select
      '  EndTime = Time
      '  MsgBox StartTime
      '  MsgBox EndTime
    '   StartTime = EndTime - StartTime
    '   MsgBox StartTime
    '   End If
    '  End If 
    'Application.ScreenUpdating = True 
    End Sub

  • Error #3343 - XMLExporter Method 'Run' of object '_Application' failed ...

    Hi all,
    I am new to the Migration Workbench tool - so excuse me if I ask some silly questions.
    I have a MSAccess 2002 application with some tables and forms (plus macros) - When run the omwb2002.mde program (version 10.1.0.4.0) - select my mdb file, set the directories and press the "Export Database Schema" button I get an "Error #3343 - XMLExporter Method 'Run' of object '_Application' failed ..." error !
    No Files are created !
    Any help would be greatly appreciated

    Hi,
    You may be receiving the MS Access Error #3343 - Unrecognized database format for one of the following reasons:
    1. You are attempting to open an MS Access database in an older version of MS Access e.g opening a 2002 MDB file on a machine where MS Access 97 is installed.
    Ensure that the Exporter Tool version and the MS Access MDB file version all match the version of MS Access installed on your machine e.g. If attempting to export a 2002 MDB file, you should use the omwb2002.mde and have MS Access 2002 installed on the machine.
    2. You have a linked table to an Excel spreadsheet.
    The Exporter tool supports the extraction of linked tables where the link is to another MS Access database. Links to Excel spreadsheets should be removed prior to export. Make a copy of your MDB file, and remove any such links from the new copy. Then carry out the export.
    3. Your database is corrupt & needs to be repaired.
    From the MS Access menu bar, go to Tools | Database Utilities | Compact and Repair Database... to repair the MDB file.
    I hope this helps. If none of the above steps resolve your issue, please let me know.
    Regards,
    Hilary

  • Access Migration Failure: Error 3021 Method 'Run' of object

    I am doing a proof-of-concept to migrate and convert some Access applications.
    I downloaded the migration tool and then tried the Northwind mdb to verify it worked and all went as planned with a SQL output file.
    When I run it against a working copy of the production mdb it gives this error and produces no output.
    Error #3021 – XMLExporter – Method ‘Run’ of object ‘_Application failed *access.mdb” Database Schema Export did not complete successfully.
    I conjecture it is trying to 'Run' the object and not finding it. How can I work around this or fix the error. I am not an Access expert so any ideas are appreciated.
    slavanaway
    Message was edited by:
    slavanaway

    Hi Ian,
    Thanks for the detailed posting, it's very helpful.
    If you are receiving error #2501, it would appear that there's an issue in opening a report in your MS Access database.
    When you open the MS Access database to be exported, can you successfully view your report(s) or do you receive the #2501 error even then? If you receive this error when accessing the reports, I believe it's relating to the printer setup on the machine. The default printer on the machine you are using may be "imcompatible" with the format of your MS Access report. Try to select another printer on your network as the default, or even try re-installing the default printer. If this does not resolve your issue, please let me know.
    I hope this helps.
    Regards,
    Hilary

  • I am mac user and want to create Object in VBA macro. when i write "set objwrd=createObject("Word.Application")"- it returns "runtime error "492" can't create object". now what it alternative to create object for word in excel macro???

    I am mac user and want to create Object in VBA macro. when i write "set objwrd=createObject("Word.Application")"… it returns "runtime error "492" can't create object". now what it alternative to create object for word in excel macro???

    Any help here...
    http://support.microsoft.com/kb/288117
    http://www.macworld.com/article/1154785/welcomebackvisualbasic.html

  • Method 'DBEngine' of object '_Application' failed

    I am trying to run the latest version of OMWB against an Access 2000 database and am not able to export the information to XML. The subject error message is then followed with another message, 'object variable or With block variable not set'. Any comments or suggestions would be greatly appreciated.
    Harvey

    Hi,
    I believe you are getting the "Method 'DBEngine' of object '_Application' failed" error because there is a problem with your DAO installation. If you manually register the dao360.dll, you should no longer experience this issue when you attempt to use the Exporter tool.
    Execute :
    Regsvr32 "C:\Program Files\Common Files\Microsoft Shared\DAO\dao360.dll"
    Please refer to the following article for detailed steps:
    http://support.microsoft.com/?scid=kb;en-us;887033&spid=2509&sid=global
    If this does not resolve your issue, please let me know.
    I hope this helps.
    Regards,
    Hilary

  • Pivot table runtime error 1004

    Hello, i have problem with creating pivot table using vba...this is the code:
    ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
    "Zdroj!R1C1:R" & Pocet & "C5", Version:=xlPivotTableVersion12).CreatePivotTable _
    TableDestination:="Vysledek!R1C1", TableName:="Kontingenční tabulka 2", _
    DefaultVersion:=xlPivotTableVersion12
    every time when i run macro i receive this message: runtime errror 1004...
    Please can you help me solve this issue???
    Thanks a lot...
    Mathew

    You can only run that macro code once - because then you have the pivotcache existing and cannot add the same one again.  Try it this way:
    On Error Resume Next
    ActiveWorkbook.PivotTables("Kontingencní tabulka 2").PivotCache.Delete
    ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
            "Zdroj!R1C1:R" & pocet & "C5", Version:=xlPivotTableVersion12).CreatePivotTable _
            TableDestination:="Vysledek!R1C1", TableName:="Kontingencní tabulka 2", _
            DefaultVersion:=xlPivotTableVersion12

  • Gettting 0x800a139e - JavaScript runtime error: SecurityError on creating websocket object in .js page

    Hi Team,
    I am creating a websocket object in the existing webapplication I have. When creating the object with url :    var url = 'ws://localhost:4334//WebSocketServer.ashx?name=Satya'; getting error  . 0x800a139e - JavaScript runtime error: SecurityError.
    var ws;
    var message ;
    var messageVal;
    function $(id) {
        return document.getElementById(id);
    function wireEvents() {
        $('sendChat').addEventListener('click', function () {
            message = $('message');
            ws.send(message.innerText);
            messageVal=message.innerText;
            message.innerText = '';
        $('btnCancelChat').addEventListener('click', function () {
            ws.close();
    function Chat () {
        wireEvents();
        var conversation = $('conversation');
        var url = 'ws://localhost:4334//WebSocketServer.ashx?name=Satya';
        //var url = 'ws://https://127.0.0.1:444/WebSocketsServer.ashx?name=Satya';
        ws = new WebSocket(url);
        ws.onerror = function (e) {
            conversation.appendChild(createSpan('Problem with connection: ' + e.message));
        ws.onopen = function () {
            //conversation.innerHTML = 'Client connected <br/>';
        ws.onmessage = function (e) {
            conversation.appendChild(createSpan(e.data.toString()));
        ws.onclose = function () {
            conversation.innerHTML = 'Closed connection!';
    The same works fine if i create a new application i access as a HTML page on page load.
    Can any one help me on this?
    Thanks,
    Satya Chenna

    http://forums.asp.net/
    The JavaScript section is at the above forum.

  • EVDRE error Validatememberset:error 1004-Method'~' of object '~' failed

    Hi
    Gurus
    when i have memberset expansion col time to have NOEXPAND i have this error
    i donot want my time col to expand after the first time so i am using NOEXPAND
    if i donot have NOEXPAND and just say BAS EVDRE = OK
    any ideas to clear this issue
    thanks

    Hi beee take a look to this note this might help you,
    [here|https://websmp130.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1573106]
    [here|https://websmp130.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1546179]
    [HERE TOO|https://websmp130.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1448836]
    hope it helps,

  • Runtime error: Boost::foreach on temporary object

    Hello,
    I have strange behavior, when using boost::foreach on the r-value (temporary object).
    It compiles fine, but that it causes std::bad_alloc while running. :-(
    It affects both ss12 and ss-exp (March one, CC: Sun Ceres C++ 5.10 SunOS_i386 2009/03/06).
    The precompiled code posted here is generated by sstudio-express.
    The problematic line is:
    foreach(std::string hit_type, utils::split((**anim_itor)["hits"]))
    While this is OK:
    std::vector<std::string> pom = utils::split((**anim_itor)["hits"]);
    foreach(std::string hit_type, pom) {
    Here is precompiled code:
    http://filebin.ca/gpubbw/unit_animation.i
    Full source code can be found here (line 557):
    http://svn.gna.org/viewcvs/wesnoth/trunk/src/unit_animation.cpp?rev=33993&dir_pagestart=250&view=markup
    Can you please check if it's suncc bug - in case yes, are all info which I provided here enough to put inside bug report?
    Thanks a lot,
    Petr

    Hi
    Looking at
    http://www.boost.org/doc/libs/1_38_0/boost/foreach.hpp
    there's this
    # if BOOST_WORKAROUND(BOOST_MSVC, <= 1300)                                                      \
      || BOOST_WORKAROUND(__BORLANDC__, < 0x593)                                                    \
      || (BOOST_WORKAROUND(BOOST_INTEL_CXX_VERSION, <= 700) && defined(_MSC_VER))                   \
      || BOOST_WORKAROUND(__SUNPRO_CC, BOOST_TESTED_AT(0x570))                                      \
      || BOOST_WORKAROUND(__DECCXX_VER, <= 60590042)
    #  define BOOST_FOREACH_NO_RVALUE_DETECTIONso there's something specific for Studio 10.
    I have 2 ideas:
    Change the above __SUNPRO_CC test to 0x590 or 0x510
    Use the -featuers=tmplife option.
    Paul
    Edited by: Paul_Floyd on Mar 23, 2009 4:50 AM

  • Runtime Error '1004': Unable to get the DropDowns property of the Worksheet class

    Private Sub SponsorList_Change()
    'On Error GoTo EH
    UnprotectWorksheets
    Application.ScreenUpdating = False
    With ActiveSheet.DropDowns("SponsorList")
    Dim tmpPivotTable As PivotTable
    For Each tmpPivotTable In ActiveSheet.PivotTables
    tmpPivotTable.PivotFields("Sponsor").CurrentPage = .list(.ListIndex)
    Next
    End With
    sponsorUpdateView
    Application.ScreenUpdating = True
    ActiveSheet.Select
    ProtectWorksheets
    Exit Sub
    EH:
    ErrorHandler
    End Sub
    The above code works fine with Excel 2010, but throws the error when executing the "With ActiveSheet.DropDowns("SponsorList")" statement with Excel 2013 (Windows 7 on both machines).  Also works fine with Excel 2013 in debug
    mode.  Help please!

    My testing indicates the line should work fine in xl2013. Have you got the correct worksheet activated? Try ensuring that the correct worksheet is activated by inserting the following code before the problem line.
        Worksheets("Sheet1").Select           'Edit "Sheet1" to the correct sheet name
    Regards, OssieMac

Maybe you are looking for

  • SQLite3-WinRT / SQLite3Component for Windows Phone 8.1 (HTML5 & JavaScript)

    Dear all I am a newbie in the developpement for Windows 8.1 and Windows Phone 8.1. After a few weeks reading books and watching videos to learn developping Windows Store Apps 8.1 with HTML5 and JavaScript, I have started my very first serious applica

  • How do I add a header/footer to a document?

    I am using Adobe X Standard, version 10.1.2 and everything I am reading tells me to go to tools>pages>Header & Footer>Add Header & Footer, but once I click on tools to the left, the only options I have are export and create pdf files and send files.

  • Problem typing in Pages for iPad

    Since the latest update for Pages, I have not been able to type. It comes out as gibberish. Letters get missed, and auto-correct does not seem to work very well. Typing is still perfect in all other apps. This is just happening in Pages. Has anyone e

  • Drivers won't install for webcam 3

    my camera was working perfect but i had to reinstall windows. since re-installing, i get an error each time i try to install the camera drivers. I originall received an error that it couldnt find the rundll32.exe file in c:\windows. I found this file

  • Notes on Slide Show Photos

    I'm making a number of slide shows from color slides. I want to put short notes on the bottom of the photos so the notes appear on the pictures as they are shown. Can I do this with I Photo or do I have to get other software to add this feature? Than