Runtime error 1114 for visual c++/ win 7 professional

After a restore in my pc, during the staring of windows I took a message 'run time error for visual C++' and just after that
'Runtime error
Program:C:\program files\iTunesHelpex.exe
R6034
An application has made an attempt to load the run time library incorrectrly.'
I tried to open the iTunes but it seemed not working.
I uninstalled and tried to reinstall iTunes.
During the installation I took a message 'service "Apple Mobile Device" failed to start. Verify tat you have sufficed privileges to start system services.'
I continued giving 'ignore' but the result was not that I wished.
I applied to Microsoft and they consulted me to apply to you.
Could you please help me to solve the problem?
Thanks in advance
vasps
([email protected])

See Troubleshooting issues with iTunes for Windows updates.
tt2

Similar Messages

  • Encountered error r6034, runtime error, window error 1114 for itune 11.1.4 update.

    encountered error r6034, runtime error, window error 1114 for itune 11.1.4 update. Same error msgs for when I tried to uninstall and reinstall as suggested.
    pls advise if you have another solution to it... thx

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99512)

  • Runtime error from Microsoft Visual C++ R6034

    When installing latest iTunes update in Windows 7 I get Runtime error from Microsoft Visual C++ R6034.
    Suggestions?

    FYI, if you are sufficiently computer literate to follow the instructions in the Youtube link, Edgar's suggested fix is much easier/quicker than a complete uninstall/reinstall.
    Nice job Edgar!

  • HT1349 iTunes will not start on my PC. I get a runtime error from the Visual C== runtime library when iTunesHelper.exe is started. The message states the application attempted to load the library incorrectly. How is the problem to be resolved?

    iTunes will not start on my PC. I get a runtime error from the Visual C++ runtime library when iTunesHelper.exe is started. The message states the application attempted to load the library incorrectly. How is the problem to be resolved?

    Click here and follow the instructions.
    (99035)

  • Adobe album photo 'reconnect' causes Runtime error in Microsoft Visual C++ Runtime Library

    When I try to open photos from any of my Adobe 3.2 Starter Album albums, it tells me I must reconnect the files.  Adobe browses for them, and can usually locate them on my hard drive.  Lately, it can't find them, and I have to 'browse' to locate them.  When I do, and open the photo in 'My Pictures', I get an immediate message: Prog: ...hop Album Starter Edition\3.2\Apps\ComponentLauncher.exe. This application has requested the Runtime to terminate it in an unusual way.  Please contact the application's support team for more information.
    The message is generated by Microsoft Visual C++ Runtime Library.  When I go back to look at the photo in the album, there is a 'ripped' icon at the bottom of the photo.  ALSO: The videos I had stored in my albums, with .avi extensions, which also have hard drive backup, no longer play (with the exception of one), and a notification came up requesting codecs.  When I tried to play them on either RealPlayer or Windows Media, they were playing with the screen showing random swirling colors, as if they were mp3's.
    Can anyone help me solve this problem?

    Hello would help someone please what do I have the same problem I had also installed icloud. I removed the icloud and safari it goes without any problems, but when icloud install again the problem has an error and shuts down safari. Help me, because I want to have installed icloud and safari. thank you
    "Microsoft visual c++ Runtime library"
    Runtime error
    My Path: Program: C:\Program Files (x86)\Safari\Safari.exe
    This application has requested the runtime to terminate in an unusual way. Please contact the applications support team for more information

  • Runtime Error # DBIF_RSQL_INVALID_RSQL for large size BOMs

    Hi All,
    I am facing problem running a custom report for Routing summary. When Executing the report gives the above runtime error.
    ShrtText: Error in RSQL module of database interface. 
    Error analysis :
    An exception occurred. This exception is dealt with in more detail below                      
        . The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was neither caught nor passed along using a RAISING clause, in the procedure                              
         "CP_SC_MTK_LOAD_COMPLEX_BY_TSK" "(FUNCTION)"                                                 
    Since the caller of the procedure could not have expected this to occur, the running program was terminated.                                                
        The reason for the exception is: The SQL statement generated from the SAP Open SQL Statement violates restriction imposed by the database system used in R/3.                                                                               
    Possible errors:                                                                               
    o The maximum size of an SQL statement has been exceeded.                                    
         o The statement contains too many input variables.                                           
         o The space needed for the input data exceeds the available memory.
    How to correct the error                                                                               
    The SAP Open SQL statement must be divided into several smaller units.                        
        If the problem occurred due to the use of an excessively large in an IN itab construct, you can use the addition FOR ALL ENTRIES                             
        instead.  When you use this addition, the statement is split into smaller according to the restrictions of the database system used.                                                                               
    You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself,                       
        use the following search criteria:                                                                               
    "DBIF_RSQL_INVALID_RSQL" CX_SY_OPEN_SQL_DBC                                                   
        "SAPLCPSC" or "LCPSCU03"                                                                      
        "CP_SC_MTK_LOAD_COMPLEX_BY_TSK"   
    This report uses SAP standard Function module "CP_SC_MTK_LOAD_COMPLEX_BY_TSK" in the select statement.
    When Analysed, We found that since the BOM size for routing is large(More than 2000 components), this dump is coming. for rest of the routings, the report works fine.
    I could not found any SAP note relevant for this.
    This is definitely related to large BOM size, if anybody of you came across such problem and how to correct it now.

    Hi,
    We did solve this problem. This problem usually comes when there is very large records in internal table (More than 2000 Approx).
    We need to split that select statement and make multiple statements so that the memory overflow doesn't happen. refer SAP note: 13607.
    We modified the coding as follows by splitting the SELECT statementu2026
    SELECT DISTINCT MANDT PLNTY PLNNR PLNAL MATNR WERKS VBELN POSNR
            INTO CORRESPONDING FIELDS OF TABLE E_MTK_IDENT
            FROM MAPL FOR ALL ENTRIES IN I_TSK_IDENT
            WHERE PLNTY =  I_TSK_IDENT-PLNTY    AND
                  PLNNR =  I_TSK_IDENT-PLNNR    AND
                  PLNAL =  I_TSK_IDENT-PLNAL    AND
                  MATNR IN I_CPSC_MTK_SEL-MATNR AND
                  WERKS IN I_CPSC_MTK_SEL-WERKS AND
                  VBELN IN I_CPSC_MTK_SEL-VBELN AND
                  POSNR IN I_CPSC_MTK_SEL-POSNR AND
                 (FREE_WHERE-WHERE_TAB).
      SELECT MANDT PLNTY PLNNR PLNAL MATNR WERKS VBELN POSNR
             INTO CORRESPONDING FIELDS OF TABLE E_MTK_IDENT
             FROM MAPL FOR ALL ENTRIES IN I_TSK_IDENT
             WHERE PLNTY =  I_TSK_IDENT-PLNTY    AND
                   PLNNR =  I_TSK_IDENT-PLNNR    AND
                   PLNAL =  I_TSK_IDENT-PLNAL    AND
                  (FREE_WHERE-WHERE_TAB).
      Delete E_MTK_IDENT where matnr NOT in I_CPSC_MTK_SEL-MATNR.
      Delete E_MTK_IDENT where werks NOT in I_CPSC_MTK_SEL-WERKS.
      Delete E_MTK_IDENT where VBELN NOT in I_CPSC_MTK_SEL-VBELN.
      Delete E_MTK_IDENT where POSNR NOT in I_CPSC_MTK_SEL-POSNR.
    Hope this helps you.
    Regards, Madhu

  • Runtime error LOAD_PROGRAM_NOT_FOUND for ARE document.

    Hi All,
    when I am creating or posting ARE document thru tcode J1IA101 & J1IA301 ,I am clicking on Printing check box & when I am going to save it .It is giving me error printing parameter is not set &
    after pressing enter it is giving runtime error, which is as follows:
    Runtime Errors         LOAD_PROGRAM_NOT_FOUND
    Exception              CX_SY_PROGRAM_NOT_FOUND
    What happened?
        There are several possibilities:
        Error in the ABAP Application Program
        The current ABAP program "SAPLJ1IEX" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
        or
        Error in the SAP kernel.
        The current ABAP "SAPLJ1IEX" program had to be terminated because the
        ABAP processor detected an internal system error.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
         caught in
        procedure "J_1IEX_PRINT_ARE" "(FUNCTION)", nor was it propagated by a RAISIN
         clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        On account of a branch in the program
        (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
        or a transaction call, another ABAP/4 program
        is to be loaded, namely " ".
        However, program " " does not exist in the library.
        Possible reasons:
        a) Wrong program name specified in an external PERFORM or
           SUBMIT or, when defining a new transaction, a new
           dialog module or a new function module.
        b) Transport error
    Thanks,
    C Singh,

    hi all,
    please change the access sequence from J1ID to J1IB and include program for printing ARE-3 in program 2 of access sequence J1IB.
    regards,
    C Singh.

  • Runtime error -  question for experts

    hello  experts,
    I was trying to debug a program for unicode compatibility, and when I finally thought I had finished it.
    This runtime error shows up
    "Error analysis                                                                                |
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_READ_SRC_LINE_TOO_LONG', was
    not caught in
    procedure "K_KKB_FIELDCAT_MERGE" "(FUNCTION)", nor was it propagated by a
    RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    There was an attempt to read program "ZPM04_UPDATE_INFOREC_FROM_PO" from the
    database.
    The READ REPORT statement allows you to copy a program text into an
    internal table. The occupied line length in the program text must not
    exceed the width of the internal table.
    The internal table "\FUNCTION=K_KKB_FIELDCAT_MERGE\DATA=L_ABAP_SOURCE[]" is 72
    characters wide. The program line is
    |    78 characters wide."
    because the error occured in standard SAP programs, I am at loss..
    Please give your suggestions.
    Goldie.

    You need to Change the setting in the program ZPM04_UPDATE_INFOREC_FROM_PO, not in the program SAPLSBKH.
    SAPLSBKH read the Report ZPM04_UPDATE_INFOREC_FROM_PO and it gets error because some lines in the ZPM04_UPDATE_INFOREC_FROM_PO are longer than 72 characters.
    As suggested by other SDN members you have to follow this steps:
    Go to SE38.
    Enter ZPM04_UPDATE_INFOREC_FROM_PO and change.
    Utilities > Setting
    In the Editor Tab, set the checkbox "Downword Compatilbe line Length (72)". You can find out this checkbox in the last section of the Editor tab.
    Press Enter.
    In the Pop-Up, Say "YES" for the line breaks.
    Regards,
    Naimesh Patel

  • Runtime Error from Microsoft Visual C++

    "the application has requested the runtime to terminate it in an unusual way. Please contact the application support team for more information."
    The Runtime Error happens when I am playing with InstanceManager addinstance buttons. The error usually happens when I make a change to the script and or the buttons position in the hierarchy and then hit Save or when I switch view from Design View to Preview PDF.
    The New Form message occurs seemingly randomly after I make a change to the document, Save it, close it, come back later and try to open it.
    Anyone know the solution? Thanks

    FYI, if you are sufficiently computer literate to follow the instructions in the Youtube link, Edgar's suggested fix is much easier/quicker than a complete uninstall/reinstall.
    Nice job Edgar!

  • Getting runtime Error 'UC_OBJECTS_NOT_CHARLIKE'  for ALV grid

    Hi,
    When I call method SET_TABLE_FOR_FIRST_DISPLAY of ALV I get runtime error 'UC_OBJECTS_NOT_CHARLIKE'.
    Actually i have set in the fieldcatalog the field 'CHK' of internal table as checkbox.
    wa_fcat-fieldname = 'CHK' .
    wa_fcat-coltext = 'Clear' .
    wa_fcat-seltext = 'Clear' .
    wa_fcat-checkbox = 'X' .
    wa_fcat-edit = 'X' .
    APPEND wa_fcat to p_lt_fieldcatalog .
    Field CHK is of type c.
    when i dont set the field as checkbox, I stop getting the error.
    Please find a solution.
    regards,
    auro

    Relevant parts of code are:
    Data Declaration:
    types:  begin of tt_revenue_det,
           chk type c,
           budat like zefit0006-zefibudat,
           racct_txt like skat-txt50,
           amount like zefit0006-zefihsl,
           pbar_txt like tgsbt-gtext,
           sgtxt like zefit0006-zefisgtxt,
           costcentertxt like cskt-ktext,
           bar_txt like skat-txt50,
           doctype like zefit0006-zefiblart,
           ch_flag type c,
           end of tt_revenue_det,
    data:    gt_revenue_det type table of tt_revenue_det.
    FIELD CATALOG
    *&      Form  set_fieldcatalog_rev_det
          text
         -->P_LT_FIELDCATALOG  text
    form set_fieldcatalog_rev_det  using    p_lt_fieldcatalog type lvc_t_fcat.
    data:wa_fcat type lvc_s_fcat.
    wa_fcat-fieldname = 'P_GT_REVENUE_DET-CHK' .
    wa_fcat-coltext = 'Clear' .
    wa_fcat-seltext = 'Clear' .
    wa_fcat-checkbox = 'X' .
    wa_fcat-edit = 'X' .
    APPEND wa_fcat to p_lt_fieldcatalog .
    wa_fcat-fieldname = 'BUDAT' .
    wa_fcat-coltext = 'Posting Date' .
    wa_fcat-seltext = 'Posting Date' .
    APPEND wa_fcat to p_lt_fieldcatalog .
    wa_fcat-fieldname = 'RACCT_TXT' .
    wa_fcat-coltext = 'Account Item Text' .
    wa_fcat-seltext = 'Account Item Text' .
    APPEND wa_fcat to p_lt_fieldcatalog .
    wa_fcat-fieldname = 'AMOUNT' .
    wa_fcat-coltext = 'Amount' .
    wa_fcat-seltext = 'Amount' .
    APPEND wa_fcat to p_lt_fieldcatalog .
    wa_fcat-fieldname = 'PBAR_TXT' .
    wa_fcat-coltext = 'Partner Business Area' .
    wa_fcat-seltext = 'Partner Business Area' .
    APPEND wa_fcat to p_lt_fieldcatalog .
    wa_fcat-fieldname = 'SGTXT' .
    wa_fcat-coltext = 'Item Text' .
    wa_fcat-seltext = 'Item Text' .
    APPEND wa_fcat to p_lt_fieldcatalog .
    wa_fcat-fieldname = 'COSTCENTERTXT' .
    wa_fcat-coltext = 'Cost Center' .
    wa_fcat-seltext = 'Cost Center' .
    APPEND wa_fcat to p_lt_fieldcatalog .
    wa_fcat-fieldname = 'BAR_TXT' .
    wa_fcat-coltext = 'Business Area' .
    wa_fcat-seltext = 'Business Area' .
    APPEND wa_fcat to p_lt_fieldcatalog .
    wa_fcat-fieldname = 'DOCTYPE' .
    wa_fcat-coltext = 'Type' .
    wa_fcat-seltext = 'Type' .
    APPEND wa_fcat to p_lt_fieldcatalog .
    wa_fcat-fieldname = 'CH_FLAG' .
    wa_fcat-coltext = 'Split' .
    wa_fcat-seltext = 'Split' .
    APPEND wa_fcat to p_lt_fieldcatalog .
    endform.                    " set_fieldcatalog_rev_det
    CREATE ALV
    *&      Form  create_alv_revenue_det
          text
         -->P_GT_REVENUE_DET  text
    form create_alv_revenue_det  using    p_gt_revenue_det.
    ALV related data declaration
    DATA: lf_layout TYPE lvc_s_layo,  "alv layout
          lt_fieldcatalog type table of lvc_s_fcat, "field catalog internal table
          wa_fieldcatalog type lvc_s_fcat. "work area for field catalog
    create alv only if container is initial
    IF G_CUSTOM_CONTAINER_REV_DET IS INITIAL.
    lf_layout-no_toolbar = 'X'. " no toolbar
    lf_layout-sel_mode = 'B'.
    populate field catalog
    perform set_fieldcatalog_rev_det using lt_fieldcatalog.
    create instance of container class
        CREATE OBJECT G_CUSTOM_CONTAINER_REV_DET
               EXPORTING CONTAINER_NAME = G_CONTAINER_REV2.
    create instance of alv grid class
        CREATE OBJECT GR_ALVGRID_REV_DET
               EXPORTING I_PARENT = G_CUSTOM_CONTAINER_REV_DET.
    call method to display table in alv grid by passing layout and fieldcatalog
        CALL METHOD GR_ALVGRID_REV_DET->SET_TABLE_FOR_FIRST_DISPLAY
             EXPORTING
             is_layout = lf_layout
             CHANGING
             IT_OUTTAB        = p_gt_revenue_det
             IT_FIELDCATALOG  = lt_fieldcatalog.
      ENDIF.
    endform.                    " create_alv_revenue_det

  • Receiving a runtime error R6034 MS visual C   runtime library

    Does anyone know how to reinstall Itunes so that this runtime error goes away?? I've tried to reinstall several times but I keep getting this error message. Also Itunes ituneshelper.exe R6034 saying "An application has made an attempt to load the C runtime library incorrectly. Please contact the applicaitons support team for more info.
    I'm getting frustrated. Will I lose my itunes library if I uninstall it from my computer and reinstall? Itunes won't come up when I plug in my Iphone or Ipod so now i can't sync anything.
    Please help!!!

    HI,dougsoulang
    i had ur problem too and know how u solve it!
    just do the following steps and u can use ur itunes again:
    1. go to ur windows software menu.
    2. click repair at: itunes, quicktime and apple software update.
    3. start => all programs => appple software update
    4. install the available updates (should be itunes + quicktime)
    5. be happy about being able to use itunes again

  • Crystal Runtime 10.5 for Visual Studio 2008 - viewer/full version support

    Hi - can reports developed in VS 2008 (CR basic 10.5) be run externally using a full or viewer version ?  If so, is there a restriction on which versions can be used for this (2008 / 11 / 13 etc) and whether the version must be full vs viewer ?
    The background is that we have an old asp.net 3.5 system that is being migrated from Windows 2008 / IIS 7 to Windows 2012 / IIS 8 - the app runs fine but it seems the 10.5 runtime is no longer supported.  Recompilation using VS 2010 isn't an option so I was looking at client-side solutions if possible to run the reports outside of the .net app - preferably using a free viewer as the reports will not be re-designed.
    I'm hoping this is a straightforward question but I've checked a few sites/forums and this isn't very clear.  Grateful if someone can advise or point me to a site which clearly covers this.
    Thanks.
    tmdev

    I don't know if you are looking for a web or win viewer, but as you are mentioning servers, I assume you are looking for some sort of a web viewer(?). And there is no such thing. There is a Windows viewer:
    http://scn.sap.com/docs/DOC-29774.
    CR 10.5 is supported - will be until Dec. 31, 2018: SAP Crystal Products - End of Mainstream Maintenance Dates: Current Products
    However there are no fixes planned. Additionally CR 10.5 does not support WIN 2012. CR 2008 (v. 12.x) is supported in VS 2008 and when updated to Service Pack 7, you will get support for WIN 2012. See SAP Crystal Reports 2008 SP7 for Windows - Supported Platforms.
    So, in a nutshell; upgrade the app to CR 2008, SP 7 and all should be fine.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • How to fix itune 11.2 runtime error r6025 for windows 8.1

    Tried compatability troubleshooting, unistalling/reinstalling and cleaning the registry any ideas to fix this?  Itunes works fine til I connect to the internet and itunes attempts to connect to the store...

    See Troubleshooting issues with iTunes for Windows updates. Use the steps in the second box to repair your iTunes installation. Your library should be unaffected by these steps but there is backup advice elsewhere in the user tip.
    tt2

  • In updating to the new version of Itunes today on Windows 7 I received this warning several times. Runtime error in Microsoft Visual C  . An application has made an attempt to load incorrectly in iTunes. Loaded it auto and manually and reinstalled entire

    Sorry, wouldn't have put entire q in title if I had known. I have completely uninstalled iTunes and reinstalled it with the same result. Help! Thanks

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (100173)

  • Runtime error installing Win 7 driver for OJ ProL7680

    I purchased a new Dell computer running Windows 7 64 bit. I am trying to install the full featured Windows 7 compatible driver (OJ Pro L7X00_FULL_14.exe) for my OJ Pro L7680.  After extracting the files from the download I get the following message: "Runtime Visual C++ Library error: This application has requested the runtime to terminate it in an unusual way."
    I can currently print, using a generic HP driver, but I cannot scan or use any of the other features that I could when this printer as installed on my previous computer using Win XP.  The AIO L7680 is useless to me without the full features.
    I have it coonected to my computer using a USB.  My computer is connected to a home net twork to which my wife's laptop is connected by wireless. We share the printer. 
    If anyone has a sure solution, I would be glad to try it.
    Thank you.

    Hi,
    I had the same problem (runtime error with Microsoft Visual C++ library) using Vista (x64), OfficeJet Pro 8500, here is what I did:
    1, uninstalled all HP products
    2, removed all the HP services manually
    3, downloaded and run the HP scrubber (v14)
    4, run CCleaner (v3.05) (http://www.piriform.com/CCLEANER)
    5, restart
    6, I had version 14 of the installer (OJP8500vA909_Full_14.exe)
    7, unpacked it to a directory
    8, it had an error relating the missing HP service
    9, found and run two msi packages (\setup\devicediscovery\DeviceDiscovery.msi and \setup\network64\Network64.msi)
    10, executed setup.exe (\setup\setup.exe)
    Everything seemed fine until the step 10/12 (removing unnecessary components...) when the installer crashed. It was the HPZscr40.exe.
    After debugging I got this error:
    Unhandled exception at 0x000007fefed425d9 (advapi32.dll) in HPZscr40.exe: 0xC00000FD: Stack overflow.
    and the stack trace was the following:
    advapi32.dll!HandleToKeyName()  + 0x39 bytes
    advapi32.dll!Wow64RegOpenKeyEx()  + 0xe0 bytes
    advapi32.dll!RegOpenKeyExInternalA()  - 0x9ee9 bytes
    I am not sure if this matters, but I have the MS C++ library 2010 (x64) installed (http://www.microsoft.com/download/en/details.aspx?id=14632).
    It's very disappointing that there is always something wrong HP software.
    Anyway, I hope it helps someone, and someday they will fix this.

Maybe you are looking for