Runtime Error in B2B application logon!
Hi,
I am working on a custom SAP B2B application. The B2B version is 7.0 SP19.
We have done a SAP upgrade to ECC6 in the backend ABAP system. After the SAP upgrade in dev and quality portals, the development portal is working fine. But, in the quality portal, the customer number was not getting passed to the backend ABAP system. So, we did a portal transport for the SHRWEB-B2B component and its associated CUSTCRM component from Dev to Q. After this transport, we did a comparison for the deployed versions in dev and Q. Both are found to be exactly the same.
But after the transport, I am getting 'Runtime Error - Contact your system administrator' error while logging into the Quality portal. The same application works fine in the development portal. When we reverted the transport, the runtime error is not seen but the customer number is not getting passed to the ABAP system.
I checked the XCM configuration. Both the dev and Q have similar settings in XCM configuration.
Please help!
Thanks,
Yuvaraj
Yuvaraj,
What does the default trace log file say for the Runtime error? At what point does it fail?
Pradeep
Similar Messages
-
Runtime Error in Portal Application
Can any body help me in resolving the following runtime error in portal application, (Netweaver Version : 7.0)
Full Message Text
03:21_21/09/11_0002_6275851
[EXCEPTION]
java.lang.NoClassDefFoundError: org.apache.commons.httpclient.methods.RequestEntity
at java.lang.J9VMInternals.verifyImpl(Native Method)
at java.lang.J9VMInternals.verify(J9VMInternals.java:69)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:131)
at java.lang.Class.forNameImpl(Native Method)
at java.lang.Class.forName(Class.java:152)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:271)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:488)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:607)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:540)
at java.security.AccessController.doPrivileged(AccessController.java:246)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:423)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: java.lang.ClassNotFoundException: org.apache.commons.httpclient.methods.RequestEntity
Found in negative cacheHi,
this exception seems caused by a missing interface org.apache.commons.httpclient.methods.RequestEntity. Please the following ones:
http://www.jarfinder.com/index.php/java/info/org.apache.commons.httpclient.methods.RequestEntity
Br,
Javier -
every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this? I don't want to lose my music and would at least want to save that.
Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086 and note to run as admin
-
I upgraded to the latest iTunes 11.1.4, after a prompt from the iTunes store. But will not open after the upgrade. One of three error messages told me to reinstall. I did. Restarted and scanned. But no help there. So I unistalled and re installed from Apples' website. The installation was okay as usual but still will not open. Keep getting the same error messages. '' Runtime Error R6034, '' '' An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.'' That's the error messages I get when I try to open the New installed iTunes 11.1.4. Right now there is no iTunes on any of my PCs. Installed but will not open. Please Help.Thanks.
Jonas.
3 Windows PCs. Safari 5.1.5 ( One Laptop with Vista. Two Windows 7 64 bit on All in One Sony desktop PCs. )Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly." When I then tried to run iTunes (assuming that, since the new install failed, my older version was still OK) I got the message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114". I tried then uninstalling iTunes and reinstalling it fresh, but encountered the same problems. Help!
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I have an iMac as my home computer, upgraded to this about a year ago from a windows pc and love it.
However...
I have a HP Compaq laptop that i am running with Windows Vista, which I use when travelling. A while ago, I believe on an update, to either windows or itunes, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.
I have a reasonable amount of tunes stored on my laptop, and am unable to ascertain as to whether this fix for allowing itunes to work again will delete my music folder and lose all the tunes i have on my laptop already?
The contents of my music folders on my laptop and iMac are not the same, as they are not synced!
Any help please on this would be appreciated!
PeteSee Troubleshooting issues with iTunes for Windows updates. The second box covers the basic removal and repair steps. The rest is links to other useful resouces.
tt2 -
On opening A.8, I get this error message "Runtime error (VisualC ) This application has requested to terminate in an unusual way. Pls. contact the app's supoort team." This happens on opening .pdf file or opening the application.
XP. Yes, it was working fine. When I open Control Panel/Add or Remove
programs, Acrobat isn't listed (Creative Suite 3 and 2 Flash Players,
and an Acrobat Reader that I installed yesterday show up, but no
Acrobat). Acrobat 6 and 8 appear in Explorer under Program
Files/Adobe.??? Thanks. -
After my pc system updated. I cannot open itune properly.Then I try to remove and re-install it again.
However, the pc said "Runtime error : R6034, the application has made an attempt to load the C runtime library incorrectly. Please contact application's support...""
How can I solve this ?
Please help !!!!!!!!!!!See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
Trouble running iTunes on my PC. getting error Runtime Error R6034 An Application to load C runtime library & ...
Hi TB326P2,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden -
When I try to open ITUNES I get the following messages: Runtime Error R6034 - "An application has made an attempt to load the C runtime library incorrectly" . I have 15,000 songs in my library. Will I lose them if I uninstall as suggested by Apple??
Exactly the same problem. But it gets worse. iTunes has now disappeared from my list of installed programs so I can't uninstall anyway. Appalling problem. This update clearly didn't get proper testing before release.
In answer to your question about your song library, I seem to remember uninstalling and reinstalling iTunes a few years ago and the uninstall didn't remove the library then - I can't see why it would. Of course there have been a lot of updates since then, so it is definitely worth asking the question. Personally, I would be inclined to make a copy (if you have the space) of the iTunes folder just to be sure.
I certainly hope they get this fixed soon. I use iTunes mainly for podcasts on my iPod and I can't download anything right now. -
When will Reader 9's Runtime error for redirected Application Data be fixed??
Has anyone heard when Adobe will fix Reader 9's Runtime error for redirected Application Data?? It's still happening with 9.1.3 for only users who have their Application Data folder redirected via Group Policy.
It's been going on for some time, as evidenced by the following link, and my own personal pain fighting this
http://forums.adobe.com/thread/391738?start=100&tstart=0Also posted here: http://forums.adobe.com/thread/391738
I haven't read through all of the posts, but the general consensus I have is that the issue is in fact related to the redir
ection of the Application Data folder. The main issue being that the use of a UNC path causes the error described, with some mention to explicit user permissions on the root of the folder path.
I was just recently made aware of this issue in our environment. Apparently we've held off upgrading to Adobe 9.x because of this issue. After a little research, it was apparent that simply modifying the default Folder Redirection policies is not possible because the use of a mapped drive is not supported.
I haven't had a chance to test this yet, and may not be able to for some time, so I thought I would share this in case someone else might be able to test. The idea being to simply use a custom ADM file to force the redirection of certain profile folders. Again, I haven't tested this using a mapped drive in the path, but I have successfully used the same settings below to redirect other folders not available by default in Group Policy.
1) Copy the text between ----- Start of ADM ------ and ----- End of ADM ------ and paste it into a text file.
2) Rename the .txt to .adm.
3) Load the ADM template into a GPO.
4) Right click "USER Custom Settings", select "View", select "Filtering" and uncheck the option "Only show policy settings that can be fully managed".
5) Configure the "Redirect Application Data" option as enabled, and enter a mapped drive path.
6) Test.
I'm interested to hear if this is a viable solution or not.
------ Start of ADM -----
CLASS USER
CATEGORY "USER Custom Settings"
CATEGORY "Folder Redirection Settings"
POLICY "Redirect My Documents"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
PART "Redirect to" EDITTEXT
VALUENAME "Personal"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectHistory
POLICY "Redirect Application Data"
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
PART "Redirect to" EDITTEXT
VALUENAME "AppData"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectHistory
POLICY "Redirect Cookies"
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
PART "Redirect to" EDITTEXT
VALUENAME "Cookies"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectCookies
POLICY "Redirect Favorites"
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
PART "Redirect to" EDITTEXT
VALUENAME "Favorites"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectFavorites
POLICY "Redirect History"
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
PART "Redirect to" EDITTEXT
VALUENAME "History"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectHistory
POLICY "Redirect Recent Documents"
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
PART "Redirect to" EDITTEXT
VALUENAME "Recent"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectRecent
END CATEGORY
END CATEGORY
------ END of ADM ----- -
Portal runtime error. in PAR application
Hello Gurus,
i developed my own portal application for change portal password.
I used the follow blog for made it:
A Change Password Application
I compiled (without errors) and deploied application on my portal and i created a new iview based on my PAR file but when i try to launch preview i have follow error:
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 11:43_24/06/10_0007_7875550
Refer to the log file for details about this exception.
have you any idea?
in Log monitor i don't find any interesting suggestion
Alexok Thanks!!!
now work correctly!
But i have a problem:
When i press the botton for confirm the change pwd, the browser don't refresh target browser but open a new one session.
i think the broblem is in this instruction:
window.top.location.href="/irj/servlet..........."
any suggestion?
Thanks in advance
Alex -
Server Error in '/BoardPortal' Application.<br />
Runtime Error<br />
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
<br />
<br />
<pre><nowiki><!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
</nowiki></pre>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
<br />
<br />
<pre><nowiki><!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration></nowiki></pre>That is a problem on the web server that you are trying to access.<br />
This may need to be fixed at that server.
Try to clear the cache and the cookies from sites that cause the problems to see if that helps.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies" -
Runtime error when customizing the logon user interface
I followe the help.sap.com:
1.http://help.sap.com/saphelp_nw04/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
2.http://help.sap.com/saphelp_erp2004/helpdata/en/1a/3afd4e641b8f42ac07bb77fe30375b/content.htm
but when logon the EP, there are runtime error ,then I got the log in the my.new.logon.par.log:
2005-09-08_18-12-37Application upload failed: my.new.logon.parjava.util.zip.ZipException: The file access permissions do not allow the specified action. /usr/sap/D01/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/deployment/pcd/my.new.logon.par
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:140)
at java.util.zip.ZipFile.<init>(ZipFile.java:155)
at com.sapportals.portal.prt.deployment.ArchiveIterator.iterate(ArchiveIterator.java:39)
at com.sapportals.portal.prt.deployment.UploadProcess.upload(UploadProcess.java:60)
at com.sapportals.portal.prt.deployment.DeploymentManager._uploadArchive(DeploymentManager.java:835)
at com.sapportals.portal.prt.deployment.DeploymentManager.uploadArchives(DeploymentManager.java:599)
at com.sapportals.portal.prt.deployment.DeploymentManager.populateRuntimeRepository(DeploymentManager.java:582)
at com.sapportals.portal.prt.deployment.DeploymentManager.runtimeRepositoryDeployment(DeploymentManager.java:310)
at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:403)
at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:54)
at com.sapportals.portal.prt.dispatcher.PortalInitializer.<init>(PortalInitializer.java:129)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer.run(Dispatcher.java:161)
at java.security.AccessController.doPrivileged1(Native Method)
at java.security.AccessController.doPrivileged(AccessController.java:351)
at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:359)
at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher.java:42)
at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispatcher.java:114)
at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:392)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.addServlet(WebComponents.java:134)
at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:376)
at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:110)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged1(Native Method)
at java.security.AccessController.doPrivileged(AccessController.java:321)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Then in order to solve the issue, I chmod the status of my.new.log.par., but still failed.
my landscape: NW04SR1SP11, Portal6SP11,AIX, Oracle.
how to solve it?
thanks a lot!Hi Hua
Check this and this should solve your problem
https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode6-1&contenttype=url&content=https://Regarding the customizing portal logon page
There are two jar files that u need to add
These are the jar files.
com.sap.portal.runtime.logon_api.jar
com.sap.portal.runtime.logon_core.jar
They can be found inside the par file. Extract the par file you will get those files
The first one have to be placed in lib(inside PORTAL-INF)and the second one inside PORTAL-INF>>private>>lib.
Regards
Rajeev. -
Runtime Error : Cacel Sap Application
Hi
any body can help me.
when I am running the Application Server Download Program. I got the following error. so kindly tell me. because I don't have an access to ST22 and as well as don't have an access to debug. The same program successfully running in the IDS.. But WHEN I AM RUNNING IN THE CLIENT SYSTEM. I GOT THE FOLLOWING RUNTIME ERROR. SO PLEASE HELP.Hi Raj,
Please check with the basis adminstartor about this and ensure server have proper memory and cpu utilization is normal.
Its hard to predict anything from this screenshot.
Regards,
Kannan
Maybe you are looking for
-
** 911 ** Cannot connect to oracle 9i database No suitable Driver
All: Any help rendered would be appreciated. (jdk 1.4.2_06, Tomcat 4.0, Oracle DB 9i Windows XP) I have a web app (Jasper report tool) and I cannot connect to a Oracle 9i database. 1)error received: "Apr 2, 2007 2:05:15 PM com.entDB.Enterprise_db con
-
when i deploy the ejb2 app in weblogic 9.2 , i got the following errors, pls help me. Errors occured while initializing a new deployment plan. ORACLE is not a legal value for GeneratorType. The value must be one of the following: [Identity, Sequence,
-
Java_home issue on Tomcat 4.1.X
I have a problem running Tomcat as a service in XP. Before, I could not get the index.jsp to load that comes with Tomcat. I disabled it as a service and added JAVA_HOME to the startup and shutdown bat files. Starting it from startup.bat, everything w
-
Multple page not coming correctly when using "Control Levels"
Hi, There is a situation wherein "Control Levels" is required to be used. However, the output is not as expected. Some of the problems with this are 1. Some of the data is being lost 2. Some pages are blank 3. The data is overlapping/overwriting on t
-
Is anyone else having this problem? I have updated the software version to 5.1, but this was happening before that (I thought the update would fix it). Any thoughts? Thanks!