Runtime Error - POSTING_ILLEGAL_STATEMENT
Hi friends,
Pls advise how to resolve this runtime error issue mentioned below...which Im getting in PO creation and at the time of releasing the same but getting the error as background express document.
Note(FYI):No enhancement has been developed and its a normal process only.
************Runtime error
Report outputRuntime Errors POSTING_ILLEGAL_STATEMENT
Statement "CALL SCREEN" is not allowed in this form.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
There is probably an error in the program
"SAPLKKBL".
This program is triggered in the update task. There, the
following ABAP/4 statements are not allowed:
- CALL SCREEN
- CALL DIALOG
- CALL TRANSACTION
- SUBMIT
How to correct the error
Probably the only way to eliminate the error is to correct the program
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note
If you have access to SAP Notes, carry out a search with the following
keywords:
"POSTING_ILLEGAL_STATEMENT" " "
"SAPLKKBL" or "LKKBLU01"
"K_KKB_LIST_DISPLAY"
Information on where terminated
Termination occurred in the ABAP program "SAPLKKBL" - in "K_KKB_LIST_DISPLAY".
The main program was "RSM13000 ".
In the source code you have the termination point in line 441
of the (Include) program "LKKBLU01".
The program "SAPLKKBL" was started in the update system.
438 if gt_stack-is_layout-detail_only is initial.
439 if gt_stack-is_layout-suppress_dynpro is initial.
440 if i_screen_start_line eq 0.
>>>>> call screen 500.
442 sy-pagno = g_sypagno. "wegen Dynpro 200 Spoolinfo bei F8+Druck
443 else.
Pls reply.
thanks & regards
sankar.
Edited by: sankar babu on May 23, 2008 12:04 PM
Hi All,
The error is related to the ABAP coding of the particular program. The program related to sales and billing.
The error you get must be the user own output screen.
Please refer to the SAP Note for further analysis and solution.
http://service.sap.com/sap/support/notes/1472777
Similar Messages
-
Runtime Error - In PO creation
Hi friends,
Pls advise how to resolve this runtime error issue mentioned below...which Im getting in PO creation and at the time of releasing the same but getting the error as background express document.
Note(FYI):No enhancement has been developed and its a normal process only.
************Runtime error
Report outputRuntime Errors POSTING_ILLEGAL_STATEMENT
Statement "CALL SCREEN" is not allowed in this form.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
There is probably an error in the program
"SAPLKKBL".
This program is triggered in the update task. There, the
following ABAP/4 statements are not allowed:
CALL SCREEN
CALL DIALOG
CALL TRANSACTION
SUBMIT
How to correct the error
Probably the only way to eliminate the error is to correct the program
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note
If you have access to SAP Notes, carry out a search with the following
keywords:
"POSTING_ILLEGAL_STATEMENT" " "
"SAPLKKBL" or "LKKBLU01"
"K_KKB_LIST_DISPLAY"
Information on where terminated
Termination occurred in the ABAP program "SAPLKKBL" - in "K_KKB_LIST_DISPLAY".
The main program was "RSM13000 ".
In the source code you have the termination point in line 441
of the (Include) program "LKKBLU01".
The program "SAPLKKBL" was started in the update system.
438 if gt_stack-is_layout-detail_only is initial.
439 if gt_stack-is_layout-suppress_dynpro is initial.
440 if i_screen_start_line eq 0.
call screen 500.
442 sy-pagno = g_sypagno. "wegen Dynpro 200 Spoolinfo bei F8+Druck
443 else.
Pls reply.
thanks & regards
sankar.
Edited by: sankar babu on May 23, 2008 12:05 PM
Edited by: sankar babu on May 23, 2008 12:05 PMHi
Check with Abapers, it transaction is calling some screen 500, which is not compatible with the Form output.
Regards
Rahul -
ASN Error on Save / publish -"Posting Illegal Statement" ABAP Runtime error
Hi All,
I am working on the ASN Scenario in SNC 7.0. Whenever I create an ASN in the SNC web UI and Save or/and Publish it, the following actions occur:
1. I get the message "ASN got saved / published successfully" in the SNC Web UI
2. Everytime I do this, a ABAP runtime error gets logged in the system. The Runtime Error is "Posting_Illegal_Statement" (seen under ST22)
3. I do not see any XML messages in SXI_Monitor.
4. I do not see any log entries in SLG1
Can anyone explain how to debug this error and what may be the possible causes for this error?
Also can anyone explain how to send the XML messages manually using the report "/N/SCA/DLV_PUBLISH". Whats the config / action needed to trigger the XML and send it to PI?
Thanks,
BharathHallo,
I have had the same problem. The ASN coding crashed and I could not reprocess the ASN posting within the PPF.
The ABAP /SCA/DLV_PUBLISH checks, wether the ASN is meant to be sent by the PPF. Just overwrite the check within the debugger and the ASN will be posted via a XML message.
Set gs_dlv-send_mode to 'D' within the debugger.
In ABAP
Publish ASN
PERFORM publish_asn.
Form publish_asn
IF gs_dlv-send_mode <> /scmb/cl_c_order=>gc_publ_method_direct. -
>> Set Mode in debugger
MESSAGE ID '/SCA/DM'
TYPE 'I'
NUMBER '136'
WITH lv_asn_number.
gv_error = 'X'.
RETURN.
ELSE.
Regards
Martin
Edited by: Martin Renardy on Oct 20, 2011 1:32 PM
Edited by: Martin Renardy on Oct 20, 2011 1:42 PM
Edited by: Martin Renardy on Oct 20, 2011 1:43 PM -
Runtime error in starting Lightroom
I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff CulpAha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am -
Runtime error while executing rule
Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type TRFN
Error Location: Object Name 0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID 00034 0000
Error Severity 100
Original Record: Segment 0001
Original Record: Number 557
and Also descripton is :-
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
Division by zero
The error was triggered at the following point in the program
GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
Transformation ID
Data record number of the source record
Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas. -
Could someone help me with a Runtime Error while saving a PDF file?
While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
PamIt is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
I open the pdf file
A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
I select ok
then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam -
RunTime Error while saving a Sales Order
Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
PavanHi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji -
WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR
hi to all experts,
whenever i try to delete a particular sale order im getting a runtime error
stating that
Short text
Screen: Illegal message
What happened?
The current screen processing action was terminated since a situat
occurred where the application could not continue.
This is probably due to an error in the ABAP program or in the cur
screen.
Error analysis
The program attempted to issue a " " message during "Exit Command" processing.
This is an illegal operation.
The program was terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
Trigger Location of Runtime Error
Program SAPMV45A
Include MV45AFZZ
Row 370
Module type (FORM)
Module Name USEREXIT_SAVE_DOCUMENT
SourceCde
message e001(zm) WITH text-335 ltab-kunnr text-334.
else.
if ktab-jkunnr <> ltab-kunnr.
ktab-jkunnr = ltab-kunnr.
jobsitecode = ltab-kunnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = jobsitecode
IMPORTING
output = jobsitecode.
SELECT SINGLE * FROM kna1 WHERE kunnr = jobsitecode.
IF sy-subrc = 0.
ktab-jname1 = kna1-name1.
ktab-jstras = kna1-stras.
ENDIF.
chg_flg = 'X'.
endif.
endif.
else.
message e001(zm) WITH text-336.
* Validation for relationship between Sold-to Party and Ship-to Party
* if ktab-ckunnr+0(4) NE ktab-jkunnr+0(4).
* message e001(zm) WITH text-335 ktab-jkunnr text-337 ktab-ckunnr.
* endif.
custcode1 = ktab-ckunnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = custcode1
IMPORTING
output = custcode1.
jobsitecode1 = ktab-jkunnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = jobsitecode1
IMPORTING
output = jobsitecode1.
SELECT SINGLE * FROM knvp
WHERE kunnr = custcode1
AND vkorg = vbak-vkorg
AND vtweg = vbak-vtweg
AND spart = vbak-spart
AND parvw = 'WE'
Error analysis
The program attempted to issue a " " message during "Exit Command"
This is an illegal operation.
The program was terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
Trigger Location of Runtime Error
Program SAPMV45A
Include MV45AFZZ
Row 370
Module type (FORM)
Module Name USEREXIT_SAVE_DOCUMENTHi,
Seems there is some problem with the user exit USEREXIT_SAVE_DOCUMENT..
Put a breakpoint and see.
Regards,
Nagaraj -
WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR " Screen: Illegal message"
Hi Experts,
While deleting a sales order giving run time error. PFB runtime error details.
If you know any OSS message, please let m know. I tried, but there is no luck.
Short text
Screen: Illegal message
What happened?
The current screen processing action was terminated since a situation
occurred where the application could not continue.
This is probably due to an error in the ABAP program or in the current
screen.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator.
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
The program attempted to issue a " " message during "Exit Command" processing.
This is an illegal operation.
The program was terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
How to correct the error
The program must be modified to correct the error.
The modification must be made in "Exit Command" processing.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
Source Code Extract
Line SourceCde
1 *---------------------------------------------------------------------*
2 * FORM YVBEP_LESEN *
3 *---------------------------------------------------------------------*
4 * Lesen der Tabelle YVBEP (nicht sortiert) *
5 *---------------------------------------------------------------------*
6 FORM YVBEP_LESEN USING US_POSNR
7 US_ETENR
8 CHANGING CH_TABIX.
9
10 YVBEP = SPACE.
11 YVBEP-MANDT = VBAK-MANDT.
12 YVBEP-VBELN = VBAK-VBELN.
13 YVBEP-POSNR = US_POSNR.
14 YVBEP-ETENR = US_ETENR.
15 READ TABLE YVBEP.
16 IF SY-SUBRC > 0.
17 MESSAGE E506 WITH US_POSNR US_ETENR.
18 ENDIF.
>>>>> CH_TABIX = SY-TABIX.
20
21 ENDFORM.
Could you please help on this issue.
Thanks
SrinuHi Srinu,
it looks like you got the error message Schedule line &1 &2 is missing in table YVBEP while deleting the sales order.
It seems, that there are no SAP notes regarding this issue. Do you have this issue with all orders or with a single order?
If only a single order causes this issue, maybe something was wrong during an update.
If you get this error for many orders, then custom code (modification, enhancement, user exit in MV45AFZZ, ...) may be the reason for it.
If you have no custom code in module pool SAPMV45A, then contact SAP for this issue.
Regards,
Klaus -
Portal runtime error while selecting page layout in WPC editor
Hello,
in web page composer, editing page, when i click on "select page layout" I have a portal runtime error popup.
The logfile shows the following :
#1.5 #005056834112005E0000000C00000FA800048E28A94966CC#1282205196819#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#1016#149##n/a##7ff9c93eab6811dfa9c70000003307de#SAPEngine_Application_Thread[impl:3]_15##0#0#Error##Java###10:06_19/08/10_0010_3344350
[EXCEPTION]
#1#com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error occurs during the rendering of jsp component
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error in java compiling
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: E:
usr
sap
EPD
JC00
j2ee
cluster
server0
apps
sap.com
irj
servlet_jsp
irj
root
WEB-INF
portal
portalapps
com.sap.netweaver.bc.util
lib
bc.util.public_api.jar(com/sapportals/wcm/WcmException.java):24: class WcmException is public, should be declared in a file named WcmException.java
(source unavailable)
1 error
I have the same by clicking on "check assignments"
Any help ?
ThanksHello Jego.
We faced the same issue after upgrade to EHP1 SP07 last week and managed to solve it by modification of layout.jsp and com.sap.nw.wpc.layoutmanager.LayoutBean within com.sap.nw.wpc.designtime.par. SAP's code requires an additional catch handler, so it is better to rise an OSS message.
As a workaround you may change a default layout for wpc main page (good for new pages) or manually edit output.xml for existing pages.
Best regards,
Aliaksandr Zhukau -
Runtime Error when installing Adobe Creative Suite 5.5 Production Premium
I am trying to install Adobe Creative Suite 5.5 Production Premium, but I keep getting a 'Runtime Error!': This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
What should I do? Any help greatly appreciated! I am running Win 7, Service Pack 1, 64 bit.We cannot know. Your information is hugely insufficient. Check Your Windows Event Viewer and tell us the "fault module" plus provide detailed specs for your computer. Runtime errors usualyl mean that A DLL is missing, a security tool is blocking critical functions or that the processor is not compatible in teh first place. Just as well this could be a driver issue with your SATA bus or whatever.
Mylenium -
Runtime error in enhancement spot-' mereq_topline does not exists.'
Hi all,
I have implemented an implicit enhancement spot in ME53n.
When i applied break point in enhancement spot and control goes to ebhancement spot in debugging mode, i got purchse requisition number in mereq_topline.
When i tried to use this structure value in code i get runtime error-
' mereq_topline does not exists.'
Can you please guide how to resolve this runtime error.
thanks.
Edited by: Sanjay_lnt on Sep 20, 2010 8:52 AMSanjay,
try to delete the enhancement and recreate it
Thanks
Bala Duvvuri -
Runtime Error in ALV Tree Output
Dear All, I am trying to create a ALV Tree using Class cl_gui_alv_tree. The Report Shows the Output with the first Node but when i try to expand it is dumping with a runtime error GETWA_NOT_ASSIGNED in class CL_ALV_TREE_BASE and method SET_ITEMS_FOR_COLUMN. The Reason being the data which was copied in the initial node display to mt_outtab is getting refreshed.
Can any one of you help me the reason for the table getting refreshed. Do i need to pass any data.
I am doing the following steps.
1. Create Container,
2. Create Tree Class object
3. Generate the Field Catalog.
4. Set table for first display " With empty internal table
5. Generate the Hierarchy
6. Call the Method Frontend Update.
Let me know if i had missed any steps in the process.
Thank you,
Regards,
Swaroop PatriOne reason for getting this error is using local defined tables for it_outtab parameter in the below code:
To get rid of the dump, define two distinct output tables globally: one is an empty table which you will pass to the below method, other one is your real output table whose size increases dependently.
CALL METHOD go_tree->set_table_for_first_display
EXPORTING
is_hierarchy_header = ls_hier_header
CHANGING
it_outtab = gt_data_e "Empty table
it_fieldcatalog = gt_fcat_tree. -
Runtime error in LSMW to create Material Master
Hi all,
I am trying to create Material No. using direct input method in lsmw. The program name is RMDATIND. But while executing the last step i.e Start Direct input program I am getting a runtime error
"A RAISE statement in the program "SAPLMG25" raised the exception
condition "NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated."
I have checked all the steps of lsmw. Any idea why this specific error is coming?Are you able to create the material manually with the data. If you have checked the basic data view then i would check to see if base unit of measure is mandatory and if its being passed/mapped properly for the material you are creating.
-
Runtime error in component :IUICMDC while testing
Hello Experts,
While testing the BSP Component :IUICMDC, we have facing errors mention below-
Cannot display view CRM_UI_FRAME/WorkAreaViewSet of UI Component CRM_UI_FRAME
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View TIUICMDC.MainWindow in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Initialization of view CRM_UI_FRAME/WorkAreaViewSet of UI Component CRM_UI_FRAME failed
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View BSPWD_BASICS/WorkAreaHostViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Cannot display view CRM_UI_FRAME/MainWindow of UI Component CRM_UI_FRAME
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View BSPWD_BASICS/WorkAreaHostViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Initialization of view CRM_UI_FRAME/MainWindow of UI Component CRM_UI_FRAME failed
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRM_UI_FRAME/WorkAreaViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
Cannot display view Root.htm of UI Component CRM_UI_FRAME
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRM_UI_FRAME/WorkAreaViewSet in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
An error occurred during initialization of the application
An exception has occurredException Class CX_BSP_WD_RUNTIME_ERROR - View CRM_UI_FRAME/MainWindow in component CRM_UI_FRAME could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
please advice
regds
debHello Hongyan,
Thnx for the reply.
When i tried to open the component in dev system, runtime error is coming but while this component is tried in sandbox this error is not there, can you help to find that diffrence.
One more observation that, RT repository is not loaded in dev while is it sucessfully loaded in sandbox.
NB: one more request , here we are trying to add po_box into this component but AET not supported.
Please advice.
regards
deb
Maybe you are looking for
-
Iphoto 9.2 crashes when importing photos
iPhoto crashes when importing all picture formats, .jpg etc. from any source. iPhoto 9.2 is same as iPhoto 11 (part if iLife) Solution to problem is to ininstall or trash a 3rd party app called 3ivx. Look in Applicaton folder. Also look in library>ap
-
Out of alignment web content created in FW CS6
Hello everyone I have designed an entire web page in Fireworks CS6, sliced up individual components of the page and exported them as HTML and image. The page displays in Chrome and Firefox beautifully but not in IE9. In IE9, some web content appears
-
AirParrot works fine with 10.8, but not with Bootcamp Win7
Hello! I know that this is not a problem directly linked to Apple, but maybe someone uses a similar setup. Since i have a Mid2010 iMac, i can't use the built-in AirPlay mirroring of ML and have to rely on a 3rd party product. I my case i'm using AirP
-
Library not seeing songs I know are there
I had to wipe out external HD (i.e. reformat as Mac only) and then I put the iTunes Music folder back on it, but that I don't believe that should make a difference.... All the music is there, and the Preferences>Advanced shows that as the location fo
-
I have tried all of the solutions suggested by the Mozilla website. I am on Windows 7.