Runtime error SAPSQL_INVALID_TABLENAME while activatin Infocube

Hi,
I modified an Infocube.
I saved it in a transport request.
While activating the Infocube I get the short dump:\
Runtime Errors         SAPSQL_INVALID_TABLENAME
Except.                CX_SY_DYNAMIC_OSQL_SEMANTICS
Short text
    A table name, specified in an SQL command, is unknown.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLRSDU_UTIL_DB6" had to be terminated because it
     has
    come across a statement that unfortunately cannot be executed.
Can anyone please help.

Hi kt,
You may get this issue because of improper cube structure.
Try to activate the info cube with RSDG_CUBE_ACTIVATE program.
Hope this will resolve your issue..
Best Regards,
Maruthi

Similar Messages

Runtime error ASSIGN_TYPE_ILLEGAL_CAST while using ASSIGN key word

Hi All,
I'm getting a runtime error ASSIGN_TYPE_ILLEGAL_CAST while using ASSIGN keyword in the below statement,
ASSIGN L_XVALUE(L_LENGTH) TO <TEXTLINE> TYPE 'C'. "see 581444
Here L_XVALUE is of type X with value 'ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S' , L_LENGTH is of type I with value 51 and <TEXTLINE> is of type C wih one character length .
Should I have to declare <TEXTLINE> as same as that of L_XVALUE ( type X ).
Thanks in Advance,
Sabu.

Decalre <TEXTLINE> as type any.

Runtime Error ( EXPORT_NO_SHARED_MEMORY ) while creating order in CRM

Hi All,
i am getting runtime error while creating order in CRMD_ORDER. details of error is provided below
Runtime Errors         EXPORT_NO_SHARED_MEMORY
Exception              CX_SY_EXPORT_NO_SHARED_MEMORY
Date and Time          29.01.2009 02:07:58
Short text
     Der EXPORT-Datencluster ist zu groß für das SHARED MEMORY.
What happened?
     The current program had to be terminated because
     a capacity limit has been reached.
What can you do?
     Please make a note of the actions and input which caused the error.
     To resolve the problem, contact your
     SAP system administrator.
     Select the "Print" function to obtain a hardcopy of the
     current termination message.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_EXPORT_NO_SHARED_MEMORY', was
      not caught in
     procedure "CRM_EVENT_PUBLISH_OW" "(FUNCTION)", nor was it propagated by a
      RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
The reason for the exception is:
This is probably due to a very large dataset, for which there are
insufficient resources in your installation.
Das SHARED MEMORY kann Objekte nur bis zu einer bestimmten Maximalgröße
speichern (1) und hat selbst eine beschränkte Größe (2).
In diesem Fall wurde die Größe 2 überschritten.
to correct the error
Mit den Profilparametern rsdb/esm/buffersize_kb und
rsdb/esm/large_object_size kann man diese Größen verändern.
Informationen über diese Parameter erhalten Sie mit der
Transaktion RZ11.
Beachten Sie jedoch, dass aus Performancegründen ein einzelnes
Objekt nicht den größten Teil des Puffers belegen darf, so dass die
maximal zulässige Objektgröße erheblich unter der Gesamtgröße des
Puffers liegt.
The exception must either be prevented, caught within proedure
"CRM_EVENT_PUBLISH_OW" "(FUNCTION)", or its possible occurrence must be
declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:

Hello Sudhir,
Have you set the user parameter CRM_EVENT_TRACE as one of your personal
user settings? If this is the case, remove this parameter and the dump will no longer occur. The parameter is intended for test purposes only, for a report which evaluates
which events are published and which function modules are called as a
result of these events. However, depending on system settings, the
allocated memory may be too low and lead to the short dump.
(CRM_EVENT_TRACE is the report which can execute in SE38.)
Regards, Gerhard

Runtime Errors: CONVT_OVERFLOW while executing transaction sm66

Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors         CONVT_OVERFLOW
Exception              CX_SY_CONVERSION_OVERFLOW
Date and Time          02.04.2011 00:41:01
Short text
     Overflow when converting from "2.90113e+09"
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
      caught in
     procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     When attempting to convert the value "2.90113e+09",
     an overflow occurred.
     There is probably an error in the program
     "SAPLTHFB".
How to correct the error
     Probably the only way to eliminate the error is to correct the program.
     You may able to find an interim solution to the problem
     in the SAP note system. If you have access to the note system yourself,
     please use the following search criteria:
     "SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
    To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
    To obtain this, call the system log with Transaction SM21
    and select the "Print" function to print out the relevant
    part.
3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, you can either use the "PRINT" command in the editor or
    print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
    Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
    The main program was "SAPMSM66 ".
    In the source code you have the termination point in line 82
    of the (Include) program "LTHFBU26".
    The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
     occurred in
    procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
     nor declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLTHFB "; its source code begins in line
    1 of the (Include program "LTHFBU26 ".

Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors         CONVT_OVERFLOW
Exception              CX_SY_CONVERSION_OVERFLOW
Date and Time          02.04.2011 00:41:01
Short text
     Overflow when converting from "2.90113e+09"
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
      caught in
     procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     When attempting to convert the value "2.90113e+09",
     an overflow occurred.
     There is probably an error in the program
     "SAPLTHFB".
How to correct the error
     Probably the only way to eliminate the error is to correct the program.
     You may able to find an interim solution to the problem
     in the SAP note system. If you have access to the note system yourself,
     please use the following search criteria:
     "SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
    To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
    To obtain this, call the system log with Transaction SM21
    and select the "Print" function to print out the relevant
    part.
3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, you can either use the "PRINT" command in the editor or
    print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
    Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
    The main program was "SAPMSM66 ".
    In the source code you have the termination point in line 82
    of the (Include) program "LTHFBU26".
    The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
     occurred in
    procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
     nor declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLTHFB "; its source code begins in line
    1 of the (Include program "LTHFBU26 ".

Runtime error: DBIF_RSQL_SQL_ERROR -- when deleting infocube in BWPRD

Dear readers,
When i try to delete the infocube 0IC_C03 from bwprd it gives this error --> Runtime error: DBIF_RSQL_SQL_ERROR ...
Kindly advise.

hii
Check the authorization of deletion of cube at BWP
Also chk whether is there any other info provider which is related to 0IC_C03 or used as a source for other Info provider or multi provider.
Check for data availability before deleting Cube.If yes, then delete data first.
Thanks
Neha

RUNTIME ERROR! While syncing contacts from 9900 to windows contacts

BlackBerry Desktop Software Version :- 7.1.0.37
BlackBerry Device Software Version :- 7.1 Bundle 1646 (v7.1.0.523, Platform 5.1.0.393)
BlackBerry Device :- Bold 9900
Windows 7
While syncing contacts to and fro , from the device and windows contacts, experiencing the following Runtime Error :-
' Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program ...
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. '

Hi and Welcome to the Community!
I don't find a specific KB that is exactly on point to your description...perhaps you will have better luck searching:
http://btsc.webapps.blackberry.com/btsc/microsites/microsite.do
Otherwise, I'd suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

RunTime error DBIF_RSQL_INVALID_RSQL while updating infotype 0035

Dear Experts,
I am delimiting(changing the end date from future date to current date) the HR objects in IT 0035 using FM RH_CUT_INFTY. It is delimiting the records as per required.
To do this update we have developed a report where we read the Object ID and the PERNR on the selection screen and inside the program we update IT35.
The program executes in three steps:
1. Lock HR Object
2. Update(in synchronous mode) the records for the specified Object ID-PERNR pair using FM RH_CUT_INFTY
3. Release HR object and go to next HR object and go back to step 1.
The report is executing good when there are less number of records for an HR object. But, when the number of (PERNR)records for an HR object is more then the report is giving a po-up "Update was terminated" and when I checked the dump for the same in ST22, it gives the following details:
Runtime Errors : DBIF_RSQL_INVALID_RSQL
Exception         : CX_SY_OPEN_SQL_DB
I would be grateful if anyone can please help me resolve this issue.
Thanks,
Jiten

Hi Jiten,
I don't know how much I can help you on this.
But I found an FM: RH_CUT_INFTY_GENERIC
This FM seems to be designed for mess process of CUT INFTY.
I check the source code, the VTASK is set to 'B' when calling RH_CUT_INFTY in a loop.
    CALL FUNCTION 'RH_CUT_INFTY'
         EXPORTING
              LOAD               = ' '
              GDATE              = GDATE
              HISTO              = HISTO
              DEL_SUCC           = DEL_SUCC
              VTASK              = 'B'
              ORDER_FLG          = ORDER_FLG
              COMMIT_FLG         = COMMIT_FLG
              AUTHY              = AUTHY
          PPPAR_IMP          =
              KEEP_LUPD          = KEEP_LUPD
              WORKF_ACTV         = WORKF_ACTV
         TABLES
              INNNN              = action_tab
           ILFCODE            =
         EXCEPTIONS
              ERROR_DURING_CUT   = 1
              NO_AUTHORIZATION   = 2
              GDATE_BEFORE_BEGDA = 3
              CUT_OF_TIMCO_ONE   = 4
              CORR_EXIT          = 5
              OTHERS             = 6.
And when all the objects have been submitted to delimitation, call FM RH_UPDATE_DATABASE at last.
I think this could be a workaround for your issue.
Cheers,

Runtime error "DATA_INCONS_IN_EXIT_MANAGEM" while executing a BADI

Hi Experts,
I am trying to use a BADI in my report Program.
But it is throwing a runtime error "DATA_INCONS_IN_EXIT_MANAGEM".
I debugged the program and found that the call to the GET_INSTANCE method of Class CL_EXITHANDLER is raising this error.
It is because the instance parameter is Initial.
Can you please let me know, what is the mistake i am doing.
My report code is as follows:
*& Report Z_GKR_BADI_01
REPORT z_gkr_badi_01.
CLASS cl_exithandler DEFINITION LOAD.
DATA: l_badi_instance TYPE REF TO zif_ex_gkr_matnrdata,                 "BADI Interface
      mara LIKE mara.
PARAMETERS: p_matnr LIKE mara-matnr OBLIGATORY.
START-OF-SELECTION.
CALL METHOD cl_exithandler=>get_instance
    EXPORTING
      exit_name              = 'ZGKR_MATNRDATA'                                                                   "BADI Definition Name
      null_instance_accepted = 'X'
    CHANGING
      instance               = l_badi_instance.
CALL METHOD l_badi_instance->get_materials
    EXPORTING
      matnr = p_matnr
    IMPORTING
      mara = mara.
WRITE: /5 mara-matnr,
            mara-matkl,
            mara-meins.
Cheers
Gaurav Raghav

Hi lakshmi,
I am new to BADI and i am doing a tutorial.
The Complete Code is given with at the thread starting.
In the Interface method i am retreiving Material details from the table MARA based on MATNR.
The code is as follows:
*& Report Z_GKR_BADI_01
REPORT z_gkr_badi_01.
CLASS cl_exithandler DEFINITION LOAD.
DATA: l_badi_instance TYPE REF TO zif_ex_gkr_matnrdata,
      mara LIKE mara.
PARAMETERS: p_matnr LIKE mara-matnr OBLIGATORY.
START-OF-SELECTION.
CALL METHOD cl_exithandler=>get_instance
    EXPORTING
      exit_name              = 'ZGKR_MATNRDATA'
      null_instance_accepted = 'X'
    CHANGING
      instance               = l_badi_instance.
CALL METHOD l_badi_instance->get_materials
    EXPORTING
      matnr = p_matnr
    IMPORTING
      mara = mara.
WRITE: /5 mara-matnr,
            mara-matkl,
            mara-meins.
Interface Method Implementaion in BADI
METHOD zif_ex_gkr_matnrdata~get_materials.
IF NOT matnr IS INITIAL.
    SELECT SINGLE *
      FROM mara
      INTO mara
      WHERE matnr = matnr.
ENDIF.
ENDMETHOD.
I checked and i didn't find the entry in the table mentioned by you.
But isnt the entry supposed to come automatically once i define the BADI.
The BADI Definition name is ZGKR_MATNRDATA.
Please help me regarding the same.

Runtime error: RAISE_EXCEPTION while release invoice doc to accounting

Hi guys,
System going to dump (Run time error: RAISE_EXCEPTION) while releasing invoice document to accounting.
In VF02 screen after giving billing document as input value and if you try to release it to accounting then system is going dump and giving the above error. I have checked accounting document number ranges also, apart from this could you pls let me know any clue(functional point of view).
Thx in advance....regards.......Divakaran.....

Hi,
please check whether the latest version (Version 6 from 28.07.2008)
of SAP Note 1039154 is contained in your system.
You can check this via transaction SE37 for the function module:
FI_WT_COPY_DOWNP_INFO.
The source code should look as follows:
CALL FUNCTION 'FI_WT_READ_WT_INFO'
EXPORTING
    I_BUKRS     = i_bukrs
    I_BELNR     = i_belnr
    I_GJAHR     = i_gjahr
    I_BUZEI     = i_rebzz
TABLES
    T_WITH_ITEM = l_with_item
EXCEPTIONS
    NOT_FOUND   = 1
    OTHERS      = 2.
Please ensure that the coding in your system is the same as per the
source code in note 1039154 if changes cannot be done via snote, then
the code should be manually added.
This has solved this issue for others in the past.
The dump might also caused by FI validation.
Could you try to deactivate the FI validation by transaction OB28 and retest on the
issue.
Cheers,
Alex

Runtime Error: SAPSQL_INVALID_TABLENAME or CX_SY_DYNAMIC_OSQL_SEMANTIC

Hi all!
When starting a BPS-Layout, I get a Runtime Error.
The Error comes from a Program, which selects from a temporary table:
Select   preis_ref from (W_tabelle) into w_preis.
endselect.
W_tabelle is at this moment for example "/BI0/0100000054"
This sholud be the temporary table.
But in the TA "se11" I can't find this table...
This is a usefull txt from the short dump:
A SELECT, UPDATE, or DELETE statement contains the invalid table
name "/BI0/0100000054".
This error was only recognized at runtime for one of the following
reasons:
- The table names were specified dynamically. or
- The SELECT, WHERE, GROUP-BY, HAVING or ORDER-BY clauses were specifed
dynamically.
This dump is in our evaluation system, in our Production System I've got no problem. They have the same patches!
Thanks
EL-Q

Hi all!
I have checked the settings in the area, level and also what I have in the layouts.
And I have checked all the variables.
I have saved the layouts and the areas, too.
Everything is fine!
But it doesn't work!
Anyone another idea?

User gets Active X Runtime error 429 while running 10.1.3.4.1 Build 130

Hello all,
I have a user running BI Publisher Desktop 10.1.3.4.1 Build 130 as an addon in Word 2010. He has had multiple issues with this program in the past, one of which even forced us to reinstall his machine to resolve. He is on a clean build of Windows XP with all Microsoft updates applied for the OS and Office.
Initially he called because he was getting a "The macro cannot be found or has been disabled because of your macro security settings" error, even though all of his macros were enabled. I found a post on the forums here telling me to run C:\Documents and Settings>del /S /A:H /A:-H *.EXD which resolved the issue. This is the post: Re: Need Help Iam getting error when i try to open my RTF file
After doing this he went into Word 2010, clicked on add-ons, data, and load xml. He has a few files he loads up, and eventually gets a Active X Runtime error 429. I can see .net is trying to load in the background when the error is presented.
I found another post here that sent me out to this site: http://obipro.blogspot.com/2012/06/setting-up-obiee-publisher.html On this site, error 429 is listed. The recommended fix is to "remove and reinstall dotnetfiles using setup.exe located at <C:\Program Files (x86)\Oracle\BI Publisher\BI Publisher Desktop\DotNetInstallFiles>" I found the setup.exe located in this path and ran it. .net isn't uninstalled by running this, but XMLPReportingTools4WordSetup asks if it would like to be repaired or uninstalled. I tried both, and reinstalled it. Same error. I tried uninstalling .net 3.5 and reinstalling it, same error.
Does anyone know how to fix Active X Runtime error 429?

Man Christian!
1000 Thanks for your tip. I run into same issue on W2K3 with 10.1.3.4 MLR#4 (so far last MR allowed for AIA apps).
I had the orabepl.ear file of the size as was mentioned earlier: 2.530.260 in the bpel\system and other one on the j2ee\ocj4_soa\applications folder.
Copying did not help.
I had to perform following steps from the <MLR#4>/custom/scripts/post.bat file which takes the file from the bpel\system,
ADDS some another .jars in it and ONLY THEN move it to the j2ee\...\applications folder:
copy %ORACLE_HOME%\bpel\system\j2ee\orabpel.ear %ORACLE_HOME%\bpel\system\services\lib\orabpel.ear
copy %ORACLE_HOME%\bpel\system\j2ee\ejb\oc4j_ejb_services.jar %ORACLE_HOME%\bpel\system\services\lib\ejb_services.jar
copy %ORACLE_HOME%\bpel\system\j2ee\ejb\ejb_ob_engine_oc4j.jar %ORACLE_HOME%\bpel\system\services\lib\ejb_ob_engine.jar
cd %ORACLE_HOME%\bpel\system\services\lib
%ORACLE_HOME%\jdk\bin\jar -uvf orabpel.ear ejb_services.jar ejb_ob_engine.jar
After doing manually these steps the orabpel.ear in j2ee\...\applications has got the size: 2.798.840 which was bigger as right after patch application.
Then I deleted the orabpel folder from the j2ee\...\aplication-deployments
started the j2ee containe (it was named: oc4_soa ) and the BPEL Console started live well as before in 10.1.3.3
As I did verify from other files The rest of steps from the post.bat file seems did well, only this part was not executed.
With Best Regards,
Alexey

Runtime Error R6025 while creating text in Premiere Pro CS6

I've looked at a number of posts on this, it seems to pop up for different reasons.
For me, it only seems to happen, and happen inconsistently but often, when I am creating or editing text in Premiere Pro CS6
"Microsoft Visual C++ Runtime Library
Runtime error!
Program: C:\Progra...
R6025
- pure virtual function call"
I'm am self taught on both the PC and Premiere, and by that I mean I can get around okay, but am in no way an expert in either; so when other posts start talking coding, ain't nobody got time for that.
I'm on a new Asus G750J
Windows 8.1, 64-bit
Intel Core i7-4700HQ CPU @ 2.40GHz
(Unrelated note... why is this computer not doing GPU accerlation?)

A search on Google leads me to guess that your registry is messed up, see this link:
http://www.microsoftvisualcruntimelibrary.com/r6025-pure-virtual-function-call.php?tid=080 38&gclid=CJff9eXtmZoCFQJN5Qodo3H49A
Try a registry cleaner and see what happens.

Runtime Error Getting While Executing Transaction ME47.

Hi Exports,
i am facing a problem in transaction ME47 For Maintaing Quotation.
if i enter RFQ Number and exceute, i am getting Runtime Error. This is happening in only in Test Server. Development and production it is working fine.
Error Details are given below.
ShrtText
    Screen does not exist
What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLXM06" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    The program had to be terminated.
Error analysis
    Program "SAPLXM06" tried to use screen 0301.
    The screen does not exist.
Trigger Location of Runtime Error
    Program                                 SAPLXM06
    Include                                 MM06EO0C_CUSTSCR1_HEAD_SET_DAT
    Row                                     10
    Module type                             (FUNCTION)
    Module Name                             EXIT_SAPLEINM_013
Source Code Extract
Line SourceCde
    1 ----
    2 *       MODULE CUSTSCR1_HEAD_SET_DATA OUTPUT                          *
    3 ----
    4 *       ........                                                      *
    5 ----
    6 MODULE CUSTSCR1_HEAD_SET_DATA OUTPUT.
    7
    8   PERFORM CUSTSCR1_HEAD_SET_DATA_PBO using fc_call.
    9
>>>>> ENDMODULE.
Thanks,
Satheesh.

This apepars to be customer code (exit). Have you verified that the programs, objects involved are identical in Test, Dev and Prod? Checked the transport logs to Test?

Runtime Error : ASSERTION_FAILED while resubmit the SC to create FOD

Hi
We are using SRM 5.00 classic scenario.
When i am clicking on resubmit button to create follow on document getting
RUNTIME ERROR : ASSERTION_FAILED
Termination occurred in the ABAP program "CL_BBP_BS_MAP_SC2RQ===========CP" -
in "MAP_DELIVERY_ADDRESS".
The main program was "SAPLBBP_MON_SC ".
In the source code you have the termination point in line 20
of the (Include) program "CL_BBP_BS_MAP_SC2RQ===========CM00J".
Please suggest what should i do ?
Thanks and Regards
Ruma Paul.

Hi Ruma,
Please check the following OSS Notes:
Note 1169451 - ASSERTION_FAILED: Shopping stuck in Error in transmission
Note 980296 - ASSERTION_FAILED dump upon resubmitting the shopping cart.
Note 996674 - Check status of shopping cart raise short dump
Note 1027966 - ASSERTION_FAILED dump for shopping cart items in spool
Thanks,
Pradeep

Runtime Error : ASSERTION_FAILED while clicking on shop button to create SC

Hi Experts.
We are using SRM 7.0
When i am clicking on shop button to create shopping cart getting
RUNTIME ERROR : ASSERTION_FAILED
Termination occurred in the ABAP program "/SAPSRM/CL_CH_WD_GAF_FACTORY==CP" -
in "SET_GAF_PROVIDER".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 29.
Please suggest what should I do ?
Thanks and Regards
Bumhwan oh

Hi Venkatesh.
Thanks for your reply.
But Note 1341605 has nothing to do with what we are discussing.
My problem is why runtime error result when I click Shop button in Employee Self-Service.
Here is source code in method SET_GAF_PROVIDER.
IF io_fpm_gaf IS NOT BOUND. "SRM 6.0 coding (without FPM)
Get Class Name from explicit configuration (stored in mapped context)
    lo_context_node = io_wd_context_node->get_child_node( name = 'CONFIGURATION_NODE' ).
    lo_context_element = lo_context_node->get_element( ).
    lo_context_element->get_attribute(
      EXPORTING
        name = `CLASS_NAME`
      IMPORTING
        value = lv_class_name ).
    CATCH SYSTEM-EXCEPTIONS create_object_class_not_found = 4.
      CREATE OBJECT lo_gaf_provider
        TYPE
          (lv_class_name)
        EXPORTING
          io_wd_context_node = io_wd_context_node.
    ENDCATCH.
    " Cause: The class specified in the TYPE addition does not exist
    " [..] handle exception / abort use case
      ASSERT FIELDS 'GAF Provider Class Name is not valid' lv_class_name
           CONDITION sy-subrc = 0.

Runtime error SAPSQL_INVALID_TABLENAME while activatin Infocube

Similar Messages

Maybe you are looking for