Runtime Error When Using Recovery CDs

Hi. I had a HDD failure on this notebook. I got a SSD to replace it with (on my own) and got the recovery DVDs from HP. After 3 hours of trying to install the recovery DVDs to the SSD only to have it fail in the last seconds because it couldn't write a "Yes" to some config file, I found a 640GB HDD to try and recover the DVDs to. Now after booting very slowly into the recovery disks, I get a
Runtime Error!
Program: x:\RITA-TOOL\Reducer.exe
This application has requested the Runtime to terminate in an unusual way.
Please contact the application's support team for more information.
Any help is appreciated!
This question was solved.
View Solution.

I will ask to have your issue escalated.
Done!
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

ABAP Runtime error when using RSPC

Hi Team,
I am getting ABAP runtime error when using RSPC in my system.For the same user id in other systems this transaction is working fine.Pls help me.
regds
Sha

Hello Sha Han,
What is the runtime error you are getting?
Please check the authorization also for the user in that system
Thanks
Chandran

ME21N Runtime error when using u201CDocument overview onu201D

Hi Gurus,
****I encountered Runtime error when using u201CDocument overview onu201D with variant u201CMy purchase ordersu201D or u201CPurchase orders on holdu201D. I encountered following ABEND message.
Varaint SAP&MEPOBEST not created
****I faced another issue which is mentioned below.
All page activities are blocked when using u201CDocument overview onu201D with variant u201CPurchase Ordersu201D or u201CContactsu201D .
Please reply.

Hello,
To use that form you need to configure ADS in your system.
I sugest you to read the ADS configure manual and the troubleshooter note: SAP Note Number: 944221

Portal runtime error when using lightweight page

hello everyone,
i had portal runtime error when i changed from default framework page to lightweight page, the DTN istn't shown,(TLN is all right) and in DTN section stay an exception message.
i checked the log:
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Resource
Component : pcd:portal_content/mxf/mxfDeskTop/frameworkPages/lightframeworkpage/com.sap.portal.lightinnerpage/com.sap.portal.lightDetailedNavigationTree
Component class : com.sap.portal.navigation.LightDetailedNavigationTree
User : mxf
     at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:444)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:527)
     at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:680)
     at com.sap.portal.navigation.LightDetailedNavigationTree.doContent(LightDetailedNavigationTree.java:47)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:375)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:388)
     at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
     at java.lang.Thread.run(Thread.java:534)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: Original exception:
     at pagelet._sapportalsjsp_LightDetailedNavigationTree.doContent(_sapportalsjsp_LightDetailedNavigationTree.java:57)
     at pagelet._sapportalsjsp_LightDetailedNavigationTree.service(_sapportalsjsp_LightDetailedNavigationTree.java:31)
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:360)
     at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:934)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:435)
     ... 13 more
Caused by: java.lang.NullPointerException
     at com.sapportals.portal.navigation.NavigationEventsHelperService.isPortalPlaceNode(NavigationEventsHelperService.java:2378)
     at com.sapportals.portal.navigation.taglibrary.conditionals.IfNavNodeIsNavZoom.doStartTag(IfNavNodeIsNavZoom.java:44)
     at pagelet._sapportalsjsp_LightDetailedNavigationTree.subDoContent(_sapportalsjsp_LightDetailedNavigationTree.java:585)
     at pagelet._sapportalsjsp_LightDetailedNavigationTree.doContent(_sapportalsjsp_LightDetailedNavigationTree.java:51)
     ... 17 more
#1.5 #000C2918355B00880000000600000F0800044681D754621D#1203423385171#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#mxf#815##192.+xxxxSD1_2732250#mxf#3b334dc0dee411dc8d1d000c2918355b#Thread[PRT-Async 9,5,PRT-Async]##0#0#Error##Java###01:16_19/02/08_0035_2732250
[EXCEPTION]
#1#java.lang.NullPointerException
     at com.sapportals.portal.navigation.NavigationEventsHelperService.isPortalPlaceNode(NavigationEventsHelperService.java:2378)
     at com.sapportals.portal.navigation.taglibrary.conditionals.IfNavNodeIsNavZoom.doStartTag(IfNavNodeIsNavZoom.java:44)
     at pagelet._sapportalsjsp_LightDetailedNavigationTree.subDoContent(_sapportalsjsp_LightDetailedNavigationTree.java:585)
     at pagelet._sapportalsjsp_LightDetailedNavigationTree.doContent(_sapportalsjsp_LightDetailedNavigationTree.java:51)
     at pagelet._sapportalsjsp_LightDetailedNavigationTree.service(_sapportalsjsp_LightDetailedNavigationTree.java:31)
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:360)
     at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:934)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:435)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:527)
     at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:680)
     at com.sap.portal.navigation.LightDetailedNavigationTree.doContent(LightDetailedNavigationTree.java:47)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:375)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:388)
     at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
     at java.lang.Thread.run(Thread.java:534)
i didn't have any own jsp files for it. My program works well under standard framework. Must i in portalapp.xml sth. insert?
get any ideals?
Thanks in advance!
best regards!
Mao

Hi,
This looks to be a quite complicated problem, and I would recommend you create a support message (OSS) against SAP on the problem.
It appears a navigation taglib fails, but it doesn't give much details on why.
Dagfinn

Runtime error when using ustack() in syscall::lwp_park:return probe

Hi,
I use Solaris 10_b72 on SUN fire V250 machine, My application has be compiled under solaris 8
using Forte 6 update 1 c++.
My dtrace script is as following:
#! /usr/sbin/dtrace -s
#pragma D option dynvarsize=4m
syscall::lwp_park:entry
        @beCalled[probefunc] = count();
        self->syscall_start_time = timestamp;
syscall::lwp_park:return
/self->syscall_start_time > 0 /
        @[ustack()] = sum(timestamp - self->syscall_start_time);
        self->syscall_start_time = 0;
END
        printa(@beCalled);
        printf("----------------------------------------------\n");
        normalize(@,1000000000);
        printa(@);
        exit(0);
} I then run the dtrace script as following:
bash-2.05b# ./syscall_error.d > /tmp/p
dtrace: script './syscall_error.d' matched 3 probes
dtrace: error on enabled probe ID 2 (ID 129: syscall::lwp_park:return): invalid address (0x1f6cf8000
) in action #2
dtrace: error on enabled probe ID 2 (ID 129: syscall::lwp_park:return): invalid address (0x1f6cf8000
) in action #2
^C
At runtime, I got the above error information. When i remove ustack() in syscall::lwp_park:return,
it work well.
Is it a bug in dtrace or my scripte is somewhere be writen wrong?
Can it help when using the formal Solaris 10 release?
thanks.

Hi,
Your script works fine on the GA release of 10 on x86...
max

Error when using recovery

I get error when i try recovery my pc
Recovery manager could not restore your computer using the factori image.
Please contact HP support. Error Code: 0xe0ef0003
Model- Hp G62 Notebook pc
Product number- XF287EA#ABU
System-Windows 7 32bit
Please help me and i start computer i get message:
BOOTMGR is missing
Press Ctrl+Alt+Del to restart
And i cant use the computer later i try to buy new Windows 7 CD but i cant Boot bios and i cant run windows cd.

Hi there
now you need to run the test on the HDD to make sure that your HDD work fine
Here is The link
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00439024&tmp_task=solveCategory&cc=us&dlc=en&lc...=
Good Luck
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Runtime error when using FM SAP_CONVERT_TO_TEX_FORMAT

Hi,
I tried to use this FM SAP_CONVERT_TO_TEX_FORMAT to convert my internal table's data to comma separator but it hit runtime error.
The runtime error says :-
Runtime Errors         CALL_FUNCTION_CONFLICT_TAB_TYP
Exceptn                CX_SY_DYN_CALL_ILLEGAL_TYPE
I tried to convert an internal table with two fields, it worked but it dont work when i was trying to convert the internal table with 53 fields. Please advice. It is not feasible to hardcode the comma into my structure or use concatenate way.

Hi Mrutyun,
Thanks for the link but that doesn't solve my problem.
Hi Viji,
I'm using the same way as you suggested before i posted the question on this forum. It didn't work.
Hi Guys,
I realised that the main problem occurs because i have such data (as below) in my internal table which leads to runtime error. The table -> i_tab_converted_data cannot accept text that is non-character type.
Eg data : Siège
Is there any way that i can overcome the above? The runtime error explains as the below .
{ Only character-type data objects are supported at the argument
position "op1" for the statement
   "IF ... op1 CO op2 ...".
In this case, the operand "op1" has the non-character-type "I". The
current program is flagged as a Unicode program. In the Unicode context,
type X fields are seen as non-character-type, as are structures that
contain non-character-type components. }
Please advise.
Thanks,
Loo

Getting Runtime error when using HP Simple Pass

Getting Runtime Error and Firefox shutdown when using HP Simple Pass on new HP dm 1165

Try HP support. <br />
http://h30434.www3.hp.com/t5/Operating-systems-and-software/HP-Simple-Pass-Not-working-in-Firefox/m-p/348876

Runtime error when using CHARM_CREATE

Hi experts,
When I try to create a new Change Request via transaction charm_create I get a runtime error.
After a bit of debugging I have found out that the error is triggered in class CL_CHM1_INSTANCE -> method IF_SOCM_INSTANCE~CHECK_STATUS_CONDITION.
This happens at line 216 at the following if statement:
IF <cond_mapp>-condition_id(1) CO 'ZY'. " customer condition
check by BADI Implementations
          CALL METHOD lc_exit->check_condition
            EXPORTING
              flt_val       = <cond_mapp>-condition_id
              hf_instance   = me
            CHANGING
              conditions_ok = l_yes.
        ELSE.
The reason is that lc_exit is initial and therfore the call to the method lc_exit->check_condition triggers a runtime error of type OBJECTS_OBJREF_NOT_ASSIGNED_NO with exception CX_SY_REF_IS_INITIAL.
Any idea why this is happening? Is there a sap solution for this?
Many thanks,
Brodo

Please implement following note:
    #963354 Performance improvement of service session buffer
    #1005323 Dump in RDSMOPSOL_MONIREFRESH in Support Package 09
or
The reason could be the system is not defined correctly in Solution Landscape.
Could you try to remove the system from the solution and add it again?
After that, check whether an application instance has been defined and
the logical system is correct, e.g. <SID>:<client>    > SM1:100.

Satellite L505-10K - Unexpected error when using recovery disk creator

Toshiba Satellite L505-10k
Can't make any recovery disc when I open toshiba recovery media creator, it says: an unexpected error occurred. Close the program and then restart it (error code: 0D00F6-49-00000015) and then I click ok and then it comes again and then I click ok and it comes again and I click ok and then the program comes and when I create the disc it comes to the verification, but then it says: Unable to read the following file. E: \ Boot \ fonts \ chs_boot.ttf (error code: 02015-20-00000000).
I really do need help, I'm afraid something will happen to my computer, so is there anyone who knows something about this kind of problem?
Thankful for your help.

Hi
I don't now if that works be cause when I got my computer I tried to create an recovery disc but it says yeah, you know, and I was looking in the folder if the file was there as it says that it could not read but the file isn't there so I don't think that it works to do an recovery from the HDD but I know that I can order an recovery disc from toshiba but I don't know if it works to do an recovery with it du you think so? but if I order an recovery disc do you think that I can get it for my language? I'm from sweden.

Getting a runtime error when using a standard Form Interface

I am getting this Error analysis:
The following syntax error was found in the program /1BCDWB/SAPLSM00000212 :
"Field "VBRK-WAERK" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. ."
The problem is, I am using a standard interface INVOICE_INTERFACE for a custom form. Why am I getting this error? Where in my form should I declare VBRK-WAERK for my program to work?

Here are some troubleshooting steps that will help you isolate and fix this problem:
Create a Z-copy of the INVOICE_INTERFACE (ex. ZIF_SD_INVOICE). Use this interface in your custom form (ex. ZFRM_SD_INVOICE).
OPTIONAL: In your custom form, deactivate all of the fields you are not using. This will minimize the amount of work in the next steps.
In your custom interface, go to the Currency/Quantity Fields section. There are 88 currency fields in the stock interface, but only 12 of them are defined in this section. At this point you have options:
If you still have fields that are active, but not listed here, you will have to enter them.
If you didn’t deactivate anything, you will have to define the remaining 76 fields here.
Use the interface at the bottom and deactivate the CMPRE_FLT field in your Adobe Form. It can be found in the PAYMENT_CARDS table contained in the HEAD_DETAIL structure of the interface. The other CURR and QUAN fields are all defined in this interface. The pictures will guide you to that field in your form.

Runtime error when trying to use Thinkvantage system updater

I get a runtime error when trying to use the Thinkvantage system updater.Have tried it numerous times and this is the exact message:
"Runtime error!
Program:C:\Program Files\Lenovo\System Update\tvsu.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information."
Can somebody please help me to get the Thinkvantage system updater working properly?
Thanks-George
This issue has since been resolved.Thanks-G

I'm getting the same error. I tried reinstalling system updater but it didn't help.

Runtime error when trying to use "Discover" button to import externally managed dimensions in developer studio.

Hi all,
I get the following error when using "Discover" to import dimensions in endeca develoepr studio
This application has requested the Runtime to terminate it in an unusual way.
Has anyone else encountered this issue?

Hi,
Another way to "find" the URL for the oamconsole, that I use if I'm not familiar with the configuration I'm working on is to first log into the Adminserver WL Console, then go to "Deployments".
Then, find "oamconsole" in the Deployments listed (on the right).
Click on that, then on the next page, look for the "Testing" tab. Click on the "Testing" tab, which which show the /oamconsole app.
Click on the "+" to expand the tree, and you should see a bunch of different URLs on the right, e.g., if you have OAM console deployed to managed servers, etc., there'll be different URLs for those, etc., and you can just click on the links to open up OAM Console in your browser.
Jim

Any solution for 4280 error when using Itunes to burn CDs?

Any solution for 4280 error when using Itunes to burn CDs?

http://support.apple.com/kb/TA38101?viewlocale=en_US

Runtime error when syncing P1i with PC

I get a runtime error when syncing my P1i to PC. The error is linked with this file, 'dxp syncml.exe', and the application is said to request the 'Runtime to terminate it in an unusual way'. How do you fix this?

Thanks Joanne. Let me give you feedback on whats happening so far.
After some doing, I discovered that my firewall is controlled by Norton Firewall Provider. (Bear in mind I am a novice in terms of managing these computer protocols). To modify the firewall settings, Norton calls this in their the control panel 'Smart firewall', I go to program control then configure. A list of programs came up with the options to add, modify, remove or rename. I searched the list and found that DXP SyncML.exe and mRouterRuntime.exe were listed and set to 'Auto' in the Access column. I noticed that under access, the options include auto, allow, block and custom. I reasoned that 'allow' is the highest level of access, and to support the sync feature, I changed the status to 'allow' from 'auto' for the DXP SyncML and mRouterRuntime executable files. If you believe it is ok and safer to keep the auto status, advise me.
I did not find in the listing any of these programs; Bearer Abstraction Layer (SCBAL.exe), Generic Device Management Executable (Generic.exe) or Symbian Connect Object Model for Symbian Connect QI (SymbianConnectRuntime.exe).I did a search and located the generic.exe and the other two files under 'common files' in 'teleca shared' folder, and 'symbian' in 'shared' and 'symbianconnectruntime', respectively.
Norton's control panel for Smart Firewall gave me three options when adding programs: allow, block and manual configure internet settings. The last of the three was recommended by Norton. However, I selected 'allow' for the generic.exe, symbianconnectruntim.exe and scba.exe.Please advise if you believe I need to modify the terms I entered to set up this procedure (is there a better setting that allow me to achieve the same level of functionality without compromising my security?)
Now Joanne, whats left is for me to try the sync after making these changes. I feel as if I accomplished a lot by only reaching this far. I will have to do a reinstallation of the SE PC Suite before moving on though. Let me explain.
When the sync failed repatedly because of the unexpected termination linked with the dxp syncml.exe, I uninstalled the SE PC Suite which was done from a disc, and installed a version from the Sony website. That version is 1.6.0, with a copyright date of 2006. With this, the sync worked. By the way I am using Windows 7 Starter. Now what I am going to do later is uninstall this version of the suite, and reinstall the one from the disc that was linked with the problem we are solving. When I do that later, I will give you feedback.
Just in case you are wondering, I have a vested interest in using the PC Suite from the disc. This application works fine for the file manager component where the drive on the phone and removable media card are read. In the 1.6.0 version, I cannot get the file manager to see the phone as connected though when I put the card (is that called M2 disc?) in the phone, it reads. So, I although sync is working with the 1.6.0 version from the website, I want to use the version I have on disc if the sync component gets over the problem we are trying to solve.
Hope I am on the right track so far I thank you profusely for your patience and dealing with my qeurry; the solution will make a world of a difference for me and many other P1i owners. Look foward to the follow up
Rohan Bell

Runtime Error When Using Recovery CDs

Similar Messages

Maybe you are looking for