Runtime error while creating material master data
hello sir,
i am facing one prolem while creating MATERIAL MASTER DATA.
AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
MESSAGE TYPE: - MDS_KEYMAP.
MESSAGE CLASS: 001.
PLEASE TELL ME WHAT TO DO?
REGARDS..
SIR THANK YOU FOR YOUR REPLY.
I ALREADY DONE THAT DUMP ANALYSIS.
SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION...
Similar Messages
-
Error while creating customer master data
dear sir,
i have created customer master and maintined all level general,compnay code and sales level data.and again deleted all areas thru t-code XD06.and thru se16n i have deleted the entires in kna1 knb1 knvv table
again while creating one with same name showing error while maintaing sales level data
Check: Table KNA1 does not exist, table KNVI does
Message no. F2061
plz help how do i rectify this problem and maintain the same cutomer no (external) again.
regards,
DebeshHi,
you did the wrong thing, don't remove the entries from standard table like KNA1, KNVV etc, SAP will maintained the entries in lot of tables same time.
XD06 is used to set delete indicator, after wards you may create new customer master, if any problem for name you may change the name field as 'delete' for old customer.
Now to solve your issue, i believe you need to first save the entries with maintainace of general data (KNA1) and then use XD02 to maintain the Sales area data, pl try this way it should work.
If this way will not work, pl maintain the tax indicator in table KNVI manually to solve the issue.
regards
Vivek.
Edited by: Vievk Vardhan on Dec 7, 2009 6:41 PM -
Error while creating vendor master data via ALE
Dear All
I am trying to create vendor master data via ALE.
I am using message type CREMAS.
I get following error message in inbound system
No batch input data for screen SAPMF02K 0610
Message no. 00344
If i try to manually create vendor , there is no error. This particular screen belong to withholding tax, however all customizing settings for withholding tax are okay.
please help.
Thanks
SanjeevTry SAP Note # 96312 if that helps.
-
Error while loading material master data
I am loading delta data for material master and its giving me the following error:
"Programs not generated for InfoSource 0MATERIAL_ATTR and source system".
How to resolve this error?
Need ur help urgently.
ThanksHi,
While loading attributes U have to select the transfer structure of the 0MATERIAL_ATTR then activate it..now proceed if it is already replicated in to BW system... other wise first do that..then go ahead....Similar to Text also...
Regards
Siddhu -
Error while creating material master
hi,
I'm getting this error message when I'm creating a material master in a specific plant/sloc. I'm probably guessing its in config. I really need some help here.
"Tables TCURM and T001W inconsistent; notify your system administrator" .
could any one draw some light on this.
thanks regards,
chintathis is not application server specific problem.
Suggest you to go to [Logistic/MM forum|SAP ERP - Logistics Materials Management (SAP MM);.
regards,
Vincent -
Runtime error while creating applicent initial data in PB10
Dear friends,
in initial data entry in reruitment in PB10 once i complete the entry of data in organization assignment.it is going into ABAP runtime error.
Trigger Location of Runtime Error
Program SAPLHRAC
Include LHRACU05
Row 390
Module type (FORM)
Module Name READ_IT_FROM_DB
Short text
Exception condition "INFTY_NOT_FOUND" raised.
can any help me how to resolve this issue.
Thanks in advance,
Regards,
sai prasadHi Revathi,
With reference to your responce i have checked pb04. all that i found is it is not taking the number range that i have assigned in NUMAP feature it is taking other number range.
How should i go further with this.
Regards,
sai prasad -
Error Message no. MM214 while creating material master
Hi folks!!
While creating material master, when i fill the MRP controller field and press enter, I get the message...
The MRP controller 391 does not exist for plant
Message no. MM214
I have checked, the MRP controller is availble in Master Data for MRP Controller. And we have already created many material master with this MRP Controller.
What could be the possible cause for this error. Please help.
Best regardsHi Qamar,
Please go thru the bellow threads,
Assignement of MRP controller to Plant
MRP CONTROLLER
MRP Controller
Re: MRP controller extension from plant 1 to plant 2
Thanks,
Swamy H P -
LSMW--Create Material master data
Hi,
When I use LSMW to create material master data, I set up all step, but when I go to last step "13 Run Batch Input Session", there is error message like "Select at least one view" in moudle SAPLMGMM, screen 0070, anybody can tell me what is problem, thanks a lot.Hi,
This is due to error while recording for MM01,
Please do a Repeat recording and ensure that once the material number, industry sector and material type is entered, on the next screen you need to select all or at least a single view to create the MMR.
Regards
Merwyn -
Error While Uploading GL Master Data in LSMW
Hello Experts,
I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
Your help would be highly appreciated.
Regards
Muhammad Yousuf Ali
SAP FI ConsultantHi,
first can you pls check your Hierarchy mode setting in FS00 - before executing Batch input session -
Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
then Now Run fresh LSMW - your issue will resolve
Mahesh -
Create Material Master Data with BAPI
Hi,
I don't know using of BAPI. I want using BAPI_MATERIAL_SAVEDATA bapi for creating material master data for Basic Data1, Basic Data2, Purchasing and MRP views. Does anybody can help me ?
Thank you
Good nightHi,
Please refer to the documentation below:
BAPI_MATERIAL_SAVEDATA
Short Text
Create and Change Article Master Data
Functionality
You use this method to create new material master data or to change existing material master data. The data on a material can be transferred for each call.
When creating material master data, you must transfer the material number, the material type, and the industry sector to the method. You must also enter a material description and its language.
When changing material master data, you need enter only the material number.
In the header data, you must select at least one view for which data is to be created. Depending on the view selected, you must maintain other required parameters. If you do not enter values for all of the required parameters, the method is ended with an error message.
The corresponding fields in the tables (such as CLIENTDATA) must first be supplied with data by the calling program. An indicator must also be set for each of these fields so that the data is written to the database by the method. This requires the calling program to supply the corresponding field with the indicator in a checkbox table (for example, CLIENTDATAX). Checkbox tables exist for tables that do not contain any language-dependent texts (MAKT, MLTX), International Article Numbers (MEAN), or tax classifications (MLAN). Several data records for a material can be created in these tables.
If a structure contains fields for units of measurement (such as structure CLIENTDATA, field BASE_UOM), language indicators (such as structure MATERIALDESCRIPTION, field LANGU), or country indicators (such as structure TAXCLASSIFICATIONS, field DEPCOUNTRY), there is always a field of the same name with the ending _ISO. This makes it possible to transfer either the internally used SAP code or a standardized ISO code for the units of measurement, language indicators, or country indicators. ISO codes are converted to an SAP code internally for further processing. The ISO code is used only if the SAP code is not transferred. If you use ISO codes, there must be a unique assignment of the ISO code to the SAP code in the following activities in Customizing for Global Parameters:
Check Units of Measurement
Define Countries
If you want to maintain long texts (basic data texts, internal comments, purchase order texts, material memos, or sales texts) or customer-defined fields for a material, some special conditions have to be observed. They are described in the documentation for parameters MATERIALLONGTEXT and EXTENSIONIN.
Parameters
HEADDATA
CLIENTDATA
CLIENTDATAX
PLANTDATA
PLANTDATAX
FORECASTPARAMETERS
FORECASTPARAMETERSX
PLANNINGDATA
PLANNINGDATAX
STORAGELOCATIONDATA
STORAGELOCATIONDATAX
VALUATIONDATA
VALUATIONDATAX
WAREHOUSENUMBERDATA
WAREHOUSENUMBERDATAX
SALESDATA
SALESDATAX
STORAGETYPEDATA
STORAGETYPEDATAX
FLAG_ONLINE
FLAG_CAD_CALL
NO_DEQUEUE
NO_ROLLBACK_WORK
RETURN
MATERIALDESCRIPTION
UNITSOFMEASURE
UNITSOFMEASUREX
INTERNATIONALARTNOS
MATERIALLONGTEXT
TAXCLASSIFICATIONS
RETURNMESSAGES
PRTDATA
PRTDATAX
EXTENSIONIN
EXTENSIONINX
Exceptions
Function Group
1001UEB
Thanks,
Sandeep. -
I got an error while creating material "Material does not exist or not activated". Can anybody help me.
BR//
Irfhi
I think you have posted your question in wrong place.
Can you please make your question more clear.
regards!
ramesh
Edited by: Ramesh kumar.p on Feb 22, 2010 12:48 PM
Edited by: Ramesh kumar.p on Feb 22, 2010 12:50 PM -
Set default value for price unit when creating material master data
HI: Every
could you tell me how to use user-exit or else ways to set default value(such as 1000) for field "Price unit" (MBEW-PEINH) when creating material master data(MM01)?
I have try to use Exit:EXIT_SAPLMGMU_001. However, this way cannot respones it.
thanks
HenryHi: Ihave find out a solution
Use BADI: BADI_MATERIAL_REF
SPROlogistics general enhancement supplement or change default data (industry)
And then creating a Implementation Name
Double click method: CREATE_MATERIAL
And then write code as below:
method IF_EX_MATERIAL_REFERENCE~CREATE_MATERIAL.
c_mbew-peinh = '1000' .
endmethod.
However, SAP still store '1000' in database evenif we change the default value such as 100 when we use TCode MM01.
in additional, we still use MM02 to change the default value such as '100'
can anybody tell me how to do?
thanks
Henry -
I want validation while creating material master with profit center
Dear Experts,
I want validation while creating material master with profit center.
If 0001 plant having 100100 profit center
0002 plant having 200200 profit center
Material A cant be created for 0001 plant for with wrong profit center 200200.
Kindly help & provide me solution clearlyHi,
Profit centers are assigned to controlling areas. And controlling areas can have many plants under them. So as long as both the plants and profit centers are in the same controlling area users will be able to extend the materials.
You should put in your validation control in the material master user exit. One of the exits you can use is
MGA00001 Material Master (Industry): Checks and Enhancements
Thanks & regards
Hameed Parvez -
MG144 Error Messages while creating Material Master
Hi,
When creating Material Master getting Error for structure field is required. Message Number MG144.
Pls suggest.
Regards,
VRGo through this note 45998
Or check, which field is required field and try to maintain or just make the optional entry in customizing -
Problem when creating material master data
Hi,
I use MM01 to create a material master data and save it, the system appears the material created successfully. But when I use MM03 to display the material, the system appears no this material exists in the system. I use ST22 find some runtime error: "Insert into MARA values MARA" .
How can I solve this problem?
Fiona ZhangHi,
Have you executed the MARA table by material name.
Then try with MARA-ERNAM field. Enter ur user id and then execute. lets see whether it is really created or not in ur system.
If u dont find any material created by ur name then go to SO01 transaction and check ur inbox....U will find some mails like update terminated.
U can talk to ABAPer to get this resolved.
Thanks & Regards,
Shaik Hussain
Maybe you are looking for
-
Phone not being recognized by itunes
My phone no longer is recognized by itunes, called apple support and they were supposed to email me on how to completely uninstall itunes but havent recieved anything.....PLEASE HELP ME
-
Problem with view Log/Trace
I have installed Peoplesoft 8.9 peopletools 8.49 and web logic 9.2 and tuxedo 9.1. I have installed everything succesfully. I have configured the Process scheduler successfully. In the reportnode(REP_NODE, the name i have given for the reporting node
-
Notifications are not secured in nokia asha 210
my sister is having nokia asha 210.i logged into facebook account in her phone and after logging out my account she is still getting notifications and half message and there is only an option to disable it but i wanna remove notifations forever.now
-
Orange E65 Wi-Fi and Livebox-driving me mad!
Hi all, I have recently bought a reconditioned Nokia E65 from Orange UK. The phone is nice, but there is one thing that's driving me mad! I cannot connect it to my wireless internet. I am on Orange home max package and I am trying to connect the E65
-
Time Capsule via ADSL modem: settings
In italy there's not a cable ADSL, so we need an ADSL modem (adapter) in order to connect to the web. So now I've just purchased a new Time Capsule and I'm in order to set the connection. I would set the device this way: 1)Set bridge mode the modem t