Runtime error while creating sales order in VA01
Dear all,
In our develpment server(ecc 6.0),while creating sales order in VA01 for a sales area, when ever entering material number and quantity and press enter, it is giving error and taking to Runtime error long text showing syntax error in program RK2LSFOC
application patch level for both production and development is same.
can any one suggest the solution please
Please note the error details
Runtime Errors SYNTAX_ERROR
Date and Time 07.01.2010 17:43:06
Short text
Syntax error in program "RK2LSFOC ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKEAK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RK2LSFOC " in include "RK2LSFOC
" in
line 128:
"No component exists with the name "KWBRUM". ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP* "
Error in the ABAP Application Program
The current ABAP program "SAPLKEAK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "RK2LSFOC ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program RK2LSFOC :
"No component exists with the name "KWBRUM". ."
| " "
Similar Messages
-
Run time error while creating sales order in VA01
Dear all,
In our develpment server(ecc 6.0),while creating sales order in VA01 for a sales area, when ever entering material number and quantity and press enter, it is giving error and taking to Runtime error long text showing syntax error in program RK2LSFOC
application patch level for both production and development is same.
can any one suggest the solution please
Moderator message - Cross post locked
Edited by: Rob Burbank on Jan 7, 2010 10:03 AMths
-
Runtime error while creating sales order in AFS(Apperal and Footware Sol)
Hi everybody,
While creating a sales order in AFS(Apperal and Footware Solutions) i am getting runtime error.In the error the error description is "CIF_SNPGRPID is unknown". Can anybody tell me how i can resolve this.And i am getting this runtime error when i am using AFS material only.When i am using standard material i am able to create the sales order.
Thanks&Regards,
RambhupalHi Rambhupal,
Check all the conditions related to Prerequisites for AFS material.
Go to SM21 transaction code and analyze the details.
Bye,
Muralidhara -
End of Valid Logistic Calender error while creating Sales Order
Hi,
While creating Sales order in VA01 the following error message comes for particular material code for a particular site only:
24.01.2202 date comes after end of valid logistics calendar. (Please
correct)
Message no. 61062
Can anyone suggest on the same.
Regards
NiloferHi,
The input value given in Sales order is " Req Delivery date: 31.03.2012", but the error comes with the below date such as
"24.01.2202 date comes after end of valid logistics calendar.(Please correct)"
We also face one more error such as
" Incorrect index structure for table XMVERF_POS/0000224110/000040 ".
From where system is taking 24.01.2202 date? -
Error while create sales order
Hi,
Please help.
I am facing error while create sales order.
No item category available (Table T184 OR VERP )
Message no. V1320
Diagnosis
No item category could be determined for the combination OR VERP .
System Response
The system does not allow further processing of this item.
Procedure
Check the entries in table T184 by means of which item category determination is controlled.
If you do not have the authorization to do this yourself, contact your system administrator.Hi,
Check in spro whether Item categorygroup VERP is assigned to sales document type.if not assign.
Path
SPRO-SD-sales-sales douments-sales document item-assign item categories. -
Getting runtime error while doing sales order
Hi,
I am getting a runtime error while doing sales order.
Error : SAPSQL_INVALID_FIELDNAME
Kindly suggets....stuck up badly.
cant do any transaction.
Regards
KishanHello,
Check OSS Note#209847 and 310304
Regards,
Gauravjit.
Reward points if the notes are helpful -
While creating Sales order in Va01 runtime error
Hi friends,
While i am creating sales order in VA01 i am getting runtime error
Thanks in advance
venuprasadThis could be due to some recent code changes in SAPMV45A...may be some user exits...
The Dump which is obtained can be analysed by an ABAP person and could lead you tot he right issue.
Hope this helps
Regards
Biju -
Error while creating sales order
while creating sales order for a particular plant there is error coming
NO NUMBER RANGE FOR DOC TYPE ZOS1VXBAK-AUARTSILD
PLANTXVBAK-VKBUR.
Intailly I have check the no series we have internal no series for all plant,the
number series which start 195000001, only one plant the giving the above error, rest all plant it is as applicable above series.
kindly guide me for the same.Hi Sanjay
This is regarding number ranges defining and assigning tips which you can follow as below:
Whenever there is a new Sales Org being created, you will be required to maintain Number Ranges for Sales Documents which are allowed for your New Sales Area.
Number Ranges can be maintained Internally by the system, however it can be maintained externally also if you customize it accordingly.
In Standard SAP the Transaction code for Maintaiing Number ranges externally is VN01.
Defining - The same can be reached through in IMG as : Sales & Distribution>Sales>Sales Document Header-->Define Number Ranges for Sales Documents.
Here you provide the system a specific Number range as follows:
Number range Key Start Number range End Number Range+Current Number
For Example: If you want to propose the following Number Range
*1 9000076000 9000076999 0
The Current Number field will be kept zero as you are proposing new number range and no sales documents have been created on it , Obviously..
*1 is a Unique Two digit Alphanumeric Key, while proposing your key, you should ensure that it should not be there in the system as existing.
If you propose a key that is there in the system or if the Number Range (Start and End Series) is there in the system already, the system will throw a message that Interval already already exists. So choose a key that is unique, and which is not there in the system.
Here , by making this , you are assigning a Key to a Number Range Series.
All the symbols can be used along with numbers from 0 to 9 and Alphabets from A to Z and in any order. For example: !1, ^A, BB,Z*,M2.........
Assigning - In Assigning, you assign the particular Sales Document to the Number Range you have already proposed as above.
The Assigning Part is done as follows:
The Two digit Alpha Numeric Key is maintained or Assigned to the respective Sales Document type in V0V8.
This can also be reached in IMG by:
Sales & Distribution>Sales>Sales Document Header-->Define Sales Document Types
Locate the particular Sales Doc Type, and double click on it to display it configuration. Here you put the Two Digit Number key in the Field- "Number range External Assignment"
Besides this:
If a new Shipping Point is created then Delivery Number ranges are required to be maintained.
Similarly,
If a new Plant is created then Billing Number Ranges are required to be maintained.
Regards
Naren -
Error while creating sales order in ECC 6.0
Hi All,
I am creating sales order through VA01.
Error comes As "Repairs processing with cost management only for the main item"
The material which i am using is finished goods.Dear Akilesh,
Just check whether the material - in MM - material type whether the Qty and value update has been ticked.
What order type you are using and what is the item category you are using?
Kindly let me know that also
Regards,
Sudhir -
Hi error while creating sales order
hi
i am getting 'not able to save' message while i am creating sales order.
how should i proceed to know where is the problem???
i tried debugging but it is taking lots of time, is there any other way i can know the reason for this error in standard code.
there is no wrong data entry while creating sales order.
i just want to know what are the ways to know where is the problem in the standard code.
thanx
rockyhi ,
try too create a sales order after that check transaction code ST22 U WILL FIND AN SHORT DUMP then check in the source code extract an pointer will be visible where the error is coming and it will also show the program name , please read the dump analysis care fully
srinivas -
Error while creating sales order with ref to contract
while creating sales order, with refernce to contract system is giving a message
Configuration not possible for material : Reason 3 --> Help
Message no. V1360
and the message is as follwed can any one explain
Diagnosis
This may have been caused by one of the following:
1. The configuration profile for the material allows or requires the bill of materials to be exploded during order processing. However, a plant has not been specified in the item.
2. The configuration profile of the material allows or requires the bill of materials to be exploded during order processing, but the order quantity in the item must be greater than 0.
3. A configuration profile has not been maintained
or
A configuration is not permitted for the material
or
4. The configuration profile of the material allows or requires the bill ofmaterials to be exploded during order processing. However, the system could not determine a date because important data is missing from the item (see incompletion log).Hi
I think you have both Variant configuration and BOM.
Pls ensure the following.
1. BOM masterdata is maintained for the variants
2. Variant configuration is configured correctly
Configuration profile is created for the material
Knowledge base object and run time version are available
3. Maintain materials as not relevant for delivery or dont give delivery quantity as 0
Once you are sure that these are in proper shape, you can start creating order. The problem wont come.
Reward points if it helps you. -
Revenue Recognition - error while creating sales order
Hi,
one of my colleague is having a Problem. Its very urgent. could you guys help.
I have used Revenue recog as"b" and Accrual start period as "a".
We are getting the error while creating a sales order, G/L account no. not found.
We have checked all the account assignment config but couldn't find anything.Hi guys,
I have a question, we being SD consultants, do we deal with n e of the revenue issues, I am assuming we deal it to a really brief extent, but I am not familiar with the areas of doing it, so could someone please help me by letting me know the areas where we deal with those issues and how are they looked upon, any material would also be great.
Just in case, my email is : [email protected]
Look forward for a response
Thanks.. -
Error while creating sales order with ref using SD_SALESDOCUMENT_CREATE
Hi
I am creating sales order with reference using function module SD_SALESDOCUMENT_CREATE , while creating i am getting error
Document doesn't have document category even thougth i am passing document category in header as well as item lavel.
In VBUK table there is no value for VGTYP.
Can you please help me how to resolve it.
Thanks & regards
kiranProblem resolved by passing REFDOC_CAT in the FM along with SD_DOC_CAT.
Thanks -
Error while creating Sale Order
Hi,
When I am creating a Cash Sale Order using VA01, I am getting the below error after SAVE
'Express document "Update was terminated" received from author', document number is showing up but not getting saved.
This error is coming up in testing system and not in development system. Can some one please help me to know why this error comes up?
Thanks in advance.
SuryaHey Surya,
'Express document "Update was terminated" received from author', i have seen this error before.I encountered this error in CRM when i was developing a Zprogram that creates a sales order in CRM and the only solution at that time was, i corrected the Zprogram as it was missing some data in the logic.
Second time i saw the error was when i was trying to create charactreistics for VC material in CT04 in ECC.
and at that time there was a broken connection of RFC between CRM and ECC systems and once the RFC and Middleware paramters are corercted b/w the 2 systems the error dissaperaed.
So in your case....... what i am thinking is there must me some change in the settings b/w testing and dev systems.
just check for configuration setings.
Regards,
Vishali -
Error while creating Sales Order Through BAPI
Hi Friends,
i am creating a RFC where i have to create sales order .
I am using bapi
BAPI_SALESORDER_CREATEFROMDAT2
for same and entering values to it.
I got the following return messages:
S V4 233 SALES_HEADER_IN has been processed successfully
S V4 233 SALES_ITEM_IN has been processed successfully
S V1 311 BDN Order 3112800903 has been saved
But when I go to transaction VA03 and enter the number i get the following error:
SD document 3112800903 is not in the database or has been archived
Can any one know how to resolve this error.I am also using BAPI_TRANSACTION_COMMIT with wait = 'X'.
Regards,
Santosh AlleHi,
Try to check the return message once.
SD document 3112800903 is not in the database or has been archived
You will get this message if the sales document is deleted from the database .The BAPI 'BAPI_SALESORDER_CHANGE' is used to delete salesorder.Check whether anyone has deleted it
Also, sometimes it may take few seconds to update the sales order in the database when using BAPI. Check the transaction after some time.
Regards,
Lakshman.
Edited by: Lakshman N on May 14, 2010 7:43 AM
Maybe you are looking for
-
I have installed Mountain Lion 10.8.2 but still cannot get email from my work exchange account. I'd appreciate any help. Thank you.
-
Creation of HRMD_A05 idoc
Hi, In Transaction PA30, if i create a HR Document the IDOC should be created. I don't find the options for output medium in PA30 (Such as Messages Button or Extras->Output in the Menu). Hope your answers will be helpful for me to proceed furthe
-
Solution Manager 7 EHP1 - Implimentation Help
Dear All, I am new to Solution Manager. I have install Solution Manager 7 EHP1 (ABAP+JAVA) on windows 2003 and applied later SP stack 24 available at Market place. We have SAP ECC 6, ABAP stack (we have not install JAVA stack for DEV/QAS or PRD Serve
-
TS1702 The movie has no longer a fast link to my movies purchases
From my ipad in itunes in the movie tab there is no longer a fast link to my movie purchases what do i do?
-
Please provide the way to find Obsolete things in ECC 6.0
Hi All, We are upgrading from 4.6c to ECC 6. We don't have list of Obsolete transactions / Reports / Programs in ECC 6.0. Its is required to clean-up the roles for obsolete transactions / Reports / Programs. And please help that where we can find t