Runtime Error while opening the transaction ME22N

Hi,
   when am trying to open the transaction ME22Nin Ecc6.0 its showing the runtime error like Assign with Length 0 in the pgm SAPLTAX1 in the Module FIND_TAX_SPREADSHEET.
than you in advance.

post your Dump information with           
Short text
What happened?

Similar Messages

  • Portal Runtime Error while checking the Transaction in Portal

    Hi all,
    We r in the phase of setting the configuration of Portal. We did the the template installer but when iam checking the transactions in Portal ( System Administration--> Support--->SAP Apllication) , it is throwing me the following error.
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    Missing Property 'ClassName' in property file for layer'Transaction/WinguiSSOLayer'..
    See the details for the exception ID in the log file
    Can anybody help me in this regard.
    Thank in Advance.

    Hi Niyati,
    I guess check through -->
    Under "Personalize > User Profile" the checkbox "Activate Accessibility Feature" must be unchecked!
    as, people earlier also faced this issue and SAP provided this solution.
    Also an alternative solution for this is like --
    Go to:
    <Drive>\usr\sap\<SID>\JC<Instance No.>\j2ee\cluster\server<Server No.>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.portal.appintegrator.sap\property\Transaction
    and see the content of the 'WebGuiSSOLayer.properties' file.
    One of the entries is ''ClassName'. The value on a 'valid' portal is: com.sapportals.portal.sapapplication.itsdetection.ITSDetectionLayer
    If it's not the case, then go to:
    <Drive>\usr\sap\<SID>\JC<Instance No.>\j2ee\cluster\server<Server No.>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
    rename the file 'com.sap.portal.appintegrator.sap.par.bak' to 'com.sap.portal.appintegrator.sap.par' open the par file and edit the file ''WebGuiSSOLayer.properties' (add the relevant entry for ClassName).
    Save the file (still with the par extension)
    Restart the portal (if everything is OK then the bak extension will be added to the filename).
    Just try this, hope it works.
    Reward points if helpful
    Regards,
    Shailesh Nagar
    Edited by: Shailesh Kumar Nagar on Jan 22, 2008 7:16 AM

  • Runtime error while opening the main window in form.

    Hi,
    i am getting this run time error when i am copying the standard script j_2i_pla and opening text element for changes even same problem with with standard form also below is the dump error
    Runtime Errors         DATA_LENGTH_TOO_LARGE
    Except.                CX_SY_RANGE_OUT_OF_BOUNDS
    Date and Time          28.10.2009 10:44:20
    Short text
         Invalid partial field access: Length is too large
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLSTXK" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
          caught in
         procedure "TOKEN_COMMENT" "(FORM)", nor was it propagated by a RAISING clause.
         Since the caller of the procedure could not have anticipated that the
         exception would occur, the current program is terminated.
         The reason for the exception is:
         In the executed program "SAPLSTXK", the system attempted to access the field
         "ITF_TOKEN" of the type "C" and with the length 255 using the length 273.
         However, a partial field access with a length specification that is
         larger than the field length is not allowed.

    Hello,
    Please check the Character formats / Text stlyes/Paragarph defined within Main window, The error is because of some inconsistency withinthe layout component.
    Regards,

  • Error while opening the receipt entry form in AR module.

    Error while opening the receipt entry form in AR module. We have created one new responsibility of Receivables for new operating unit . When we open the corresponding
    forms , we are getting the error message as :
    NO_DATA_FOUND
    FRM-40735: PRE-FORM trigger raised unhandled exception ORA-20002.
    Kindly help in resolving.
    We have ERP version of 11.5.10.2

    Please also see the following docs.
    Transactions Workbench Error: Listing of ORA Errors [ID 1336495.1]
    FRM-40735 ERROR OPENING LIFE EVENT REASONS FORM BENLEVRS [ID 1517593.1]
    APP-AR-96996: The Defined Sales Representatives Have Incorrect Id'S [ID 437107.1]
    ARXSUDRC Receipt Classes Errors With APP-AR-96994: Please Define Sales Representatives [ID 357454.1]
    Thanks,
    Hussein

  • Error Message "Error while Opening the Document"

    Hi Friends,
    I have a problem while opening the SFP transaction and Clicking on the Layout Tab the SAP System is giving an error message saying "Error while Opening the Document".
    I have tried testing on several systems like IDES, ERP, Retail systems. But it is giving me same error. Is this the problem with ADOBE LIVECYCLE DESIGNER?
    And when I click on the Performance Assistant it has given me some information:
    Error while opening document
    Message no. SOFFICEINTEGRATION143
    Diagnosis
    An error occurred in the desktop application while opening a document.
    Friends can you help me in solving this problem.
    Thanking yoy in Advance
    Pradeep Goli

    Pradeep,
    Maybe Live Cycle Designer has not been uninstalled correctly from your system. So goto the following lcaotions and remove the Designer folder if you find them:-
    C:\Program Files\Adobe
    C:\Documents and Settings\<your-username>\Application Data\Adobe\
    Alternatively try installing Live Cycle Designer on some other machine in your network and see if you encounter the same error.
    Similar thread for reference :  Error - Adobe Live Cycle designer
    Chintan

  • Runtime Error While executing the WebDynpro Application

    I am getting the Runtime Error While executing the WebDynpro Application. The error message is "TSV_TNEW_OCCURS_NO_ROLL_MEMORY".
    It says like "
    Short text
        No roll storage space of length 9728 available for OCCURS area.
    What happened?
        Each transaction requires some main memory space to process
        application data. If the operating system cannot provide any more
        space, the transaction is terminated.
    But while executing some other Web Dynpro Applications, i am not facing this problem.

    Generally this error is a result of an infinite loop on internal table or select endselect statement where by severs  temporary memory gets full. With no memory to insert new records in temporary memory system generates the dump.
    Check your application or ask basis consultant to look at the memory parameters in instance profile.
    Regards
    Rohit Chowdhary

  • Error while opening the backup information fom Maxdb

    Hello All,
    I am getting the below error while opening the backup information from Maxdb.
    Backup history file /sapdb/data/wrk/<sid>/dbm.knl corrected in line <xxxx> ; 2012-02-21 07:30:25 can not be convert in to a signed 32 bit integer value
    The full line is as below from the dbm.knl file:
    4F4337C5014C|LOG_000030571|SAVE WARM|2012-02-21 07:16:03|2012-02-21 07:20:49|2012-02-21 07:20:53|2012-02-21 07:21:04|2605155691|2605244F433A01014E|LOG_000030573|SAVE WARM|2012-02-21 07:26:09|2012-02-21 07:30:24|2012-02-21 07:30:25|2012-02-21 07:30:41|2605326357|2605411689|   |<SID>_LOG                                                         |     85344|         0|         0|                                        |
    I am able to open and check this line in the file dbm.knl ; But, i am not getting why this error is occurring while opening the backup information from Maxdb. I am able to view the backup logs through LC10.
    Currently i am getting this error and when i am click on cancel (or ok) getting the blank page.  I am not able to view the backup logs form Maxdb.
    Please give me some hint to resolve this.
    Regards,
    Nagendra.

    Hi,
    Use below procedure
    1. Go to /sapdb/SRD/data/wrk
    2. cp -rp dbm_knl dbm_knl_OLD
    3. vi +<Line in which the corruption occured> dbm.knl
    see there must be a corruption in the given line and it will specified with a green color
    delete that part and make the format as per the above line
    4. save the file
    5. execute the procedure again from Database studio or Database Manager
    (Note: Make sure that you have taken the backup first of dbm.knl file Because any extra entry may cause another corruption)
    (FYI : This file is only log file of successful backups and returns the return-code)
    Regards,
    Paramvirsinh Jetawat
    SAP BASIS Consultant

  • Error while opening the BO report

    Dear Experts,
    Am getting following error while opening the reports through Xcelsius.You cannot amke a connection to the BusinessObjects web service ( LO 02010)
    Failed to get the document information. (LO 26315)
    Some objects are no longer available in the universe .See your BO admin ( Error : WIS 00001)
    Actually am the BO administrator , Yesterday I 've changed license key for Xcelsius and BO Enterprise...

    Hi ,
    You can view the following URl ,which may be helpful for you.
      Live office excel error
    -Thanks,

  • Error while opening the application help

    Hello,
    We are trying to open the application help from the R/3. It is giving
    us the follwoing error.
    This is linked to the knowledge warehouse server 6.20.
    Error:
    SAP Internet Knowledge Server
    The IKS cannot display the page you asked for.
    Please contact the administrator if this problem persists.
    Additional infomation:
    RFC Error: System exception raised, connection closed (SIW_IKS_VAR_GET)
    RfcRc: <3>, ErrorInfo:
    The confuguration looks fine as per the note # 381266.
    The help is working fine previously.
    Thanks in advance.
    Best regards,
    Madhav.

    Hi Arun,
    Error due to incorrect installation of life cycle designer.
    check the below links for solution.. ( same issue ).
    Error Message "Error while Opening the Document"
    Error - Adobe Live Cycle designer
    Regards
    Srinivas

  • Error while opening the file store file "WLS_DIAGNOSTICS000000.DAT".....

    I have a WL 9.2.1 running on Sun solaris o/s .....it is failing to start thowing the following exception
    <Mar 19, 2009 5:21:17 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    weblogic.diagnostics.lifecycle.DiagnosticComponentLifecycleException: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was a
    n error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
    at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:44)
    at weblogic.diagnostics.lifecycle.DiagnosticFoundationService.start(DiagnosticFoundationService.java:107)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    Caused by: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS0
    00000.DAT"
    at weblogic.store.io.file.Heap.open(Heap.java:166)
    at weblogic.store.io.file.FileStoreIO.open(FileStoreIO.java:85)
    at weblogic.store.internal.PersistentStoreImpl.open(PersistentStoreImpl.java:350)
    at weblogic.store.PersistentStoreManager.createFileStore(PersistentStoreManager.java:202)
    at weblogic.diagnostics.archive.DiagnosticStoreRepository.getStore(DiagnosticStoreRepository.java:61)
    at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:42)
    ... 4 more
    Caused by: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
    at weblogic.store.io.file.StoreDir.throwIOException(StoreDir.java:213)
    at weblogic.store.io.file.StoreDir.open(StoreDir.java:103)
    at weblogic.store.io.file.Heap.open(Heap.java:164)
    ... 9 more
    Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11
    at weblogic.store.io.file.direct.DirectIONative.open(Native Method)
    at weblogic.store.io.file.direct.DirectFileChannel.<init>(DirectFileChannel.java:51)
    at weblogic.store.io.file.direct.DirectIOManager.open(DirectIOManager.java:138)
    at weblogic.store.io.file.StoreFile.openInternal(StoreFile.java:112)
    at weblogic.store.io.file.StoreFile.open(StoreFile.java:142)
    at weblogic.store.io.file.StoreDir.open(StoreDir.java:95)
    ... 10 more
    i went ahead and checkd the file and the privs on the file they look correct -rw-r--r-- ...but when i just restart it ..it starts with no errors the next time......What could be the issue.....please help
    Then only reason i could think of is the size of the file is 35MB now...is this the problem....if yes....is there a way to automaticaly rotate this file ....

    The root cause appears to be right in the stack trace:
    Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11I think this indicates that either the file was either locked (because another instance of WebLogic had it opened), or that the file was unavailable for some reason. WebLogic locks files as a safety precaution to prevent misconfigured setups (multiple domains sharing the same directory and store name) from attempting to share the same file.
    I don't think that this message necessarily means there is a file corruption.
    As for rotation, the file store automatically adds new files as needed (I think its 1 file for every 2GB of data). The "diagnostics" file store is generated by the optional diagnostics feature, and I think that this feature has options for controlling the amount of stored data.
    Tom

  • Error while resubmit the transaction in Oracle 10g B2B

    Hi All,
    I am facing the below error while resubmitting the transactions
    bash-3.00$ java oracle.tip.adapter.b2b.data.ReSubmit
    Exception in thread "main" java.lang.NoClassDefFoundError: oracle/tip/adapter/b2b/data/ReSubmit
    bash-3.00$
    Regards
    sekhar

    Hi Sekhar,
    Make sure that you are setting the environment first by running Midtier_Home\ip\install\setenv.bat OR Midtier_Home\ip\install\setenv.sh (according to your OS). Run the resubmit command after executing this setenv file.
    Regards,
    Anuj

  • Error while opening the database.--urgent---pls help...

    Hi,
    Got the below error while opening the database.
    Database version is :10.1.0.4.0
    database is in noarchive log mode.
    the database is coming in to no-mount state and mount state quite easily but not able to open the database.
    Got the below error while opening the database.
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    Mon Sep 29 15:32:39 2008
    Errors in file /xxx/udump/aaa_ora_18737.trc:
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    Mon Sep 29 15:32:41 2008
    DEBUG: Replaying xcb 0xc0000000350c1c18, pmd 0xc0000000353b21f0 for failed op 8
    Doing block recovery for file 2 block 9483
    No block recovery was needed.
    on Sep 29 15:34:01 2008
    Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    Mon Sep 29 15:34:04 2008
    Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    PMON: terminating instance due to error 472
    Instance terminated by PMON, pid = 18723
    Please help me....................

    Hi..
    This ORA-600 refers to a mismatch has been detected between Redo records and rollback (Undo) records.Is better to lock a call with oracle support.Secondly, apply latest patch on the DB.
    I had expereiced the same error, but my DB was in open mode, so i created a new undo tablespace and changed the undo_tablespace parameter and it worked.
    Anand

  • Getting error while opening the workbook

    Hi,
    I am getting one error while opening the workbook.
    Error: The Dependency "Join condition" is not found in EUL.
    Basically, the workbook was working fine. But we droped some joins and recreated new joins. After this change, our worknbooks starts giving this error.
    Please advice.
    Where i can get the dependency information in EUL?
    Thanks, rajesh

    This has to be one of the most 'pain in the butt' errors you can get (well ... 0000 - normal successful completion is another).
    Although I've seen this one for years, these days I'm finding many more examples that are happening to me with this (simply the environment I'm in) and in many cases, requires rebuilding the workbook again. For example, sometimes I put in the join that I think it's having a problem with, but the existing workbook simply won't run. Recreating the workbook exactly the same gets it to work properly. Maybe it's a 4.x thing (version I'm on these days) ... but just a warning that you may well have to rebuild.
    Russ

  • "The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file

    Hi Techys,
    can you give me the suugestions for below error in sharepoint 2010.
    Error: "The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file.
    User having the contribute permission.
    as a admin i can open the document without any error.
    user wants to open the document via online and VPN connection.
    while the user seeing the document info the below error is indicationg .
    Offline Copy, Work book is readonly Mode.
    The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file which was upto date.
    Many Thanks,
    Madhu

    Make sure that the user is able to access workstream from the site collection through VPN. If the user is able to access already, try to download the file locally and see if the data is getting loaded and upload again.
    --Cheers

  • Error When Opening the Transactions/Transactions Window

    Hi All,
    in Oracle E-Business Suite R12 Version
    Error When Opening the Transactions/Transactions Window
    ORA-06502: PL/SQL: numeric or value error
    ORA-06512: at "APPS.AR_MO_GLOBAL_CACHE", line 55
    ORA-06512: at "APPS.ARP_STANDARD", line 2912
    ORA-06512: at "APPS.ARP_GLOBAL", line 282
    FRM-40735: PRE-FORM trigger raised unhandled exception ORA-06502
    Can any body help about the error
    Thanks in advance.

    Did you go through the below notes:
    Note:125204.1, Note:153207.1 and Note:191306.1.

Maybe you are looking for