Runtime Errors " UNCAUGHT_EXCEPTION ...... While loading data
Hi Gurus: Need yoyur help to resolve the loading issue (Data Mart)
Scenario:
Loading data from BW layer to BI layer - Cube to Cube loading of data.
Data loaded in DW layer cube with no issues. However, gives the following error when loading to
BI layer cube (It is 1:1 mapping excpt for couple of convesrion routines on satndard objects such
as Material Division, periods and Unit).
Message:
*Runtime Errors UNCAUGHT_EXCEPTION*
*Exception CX_RSR_X_MESSAGE*
This happens in Program - 'SAPLRRMS'; Include -"LRRMSU13"
What happened?
The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
along the calhierarchy Since exceptions represent error situations and this error was
not adequately responded to, the running ABAP program 'SAPLRRMS' has to be
terminated.
We are aware of the following 2 OSS notes reference:
855424 - Error in Formula Compiler
872193 - Run Time Error 'UNCAUGHT_EXCEPTION' during upload
Any other solution for this? please let me know.
Thanks.......SMaalya
please replicate DM system.
-- sameer
Similar Messages
-
Hi,
Ours is a fresh installation..
When i am loading for the first time till PSA it is successful..
As HR data sources are 3.5 datasources, i am loading cube via infopackage..
When i start the load to cube it is giving me dump with exception CX_RSR_X_MESSAG.
i checked note 615389 which talks about "buffering of number range object BIM9999998". the 0REQID is not buffered, but it does not throw any error msg in RSRV to correct the error..
and one more note 1157796 which talks about patches with version BI 7.0.
Now we are in BI 730 with heighest level 0005.
Not sure how to solve this error
Any ideas?S Simran wrote:
Hi,
>
> Ours is a fresh installation..
>
> When i am loading for the first time till PSA it is successful..
>
> As HR data sources are 3.5 datasources, i am loading cube via infopackage..
>
> When i start the load to cube it is giving me dump with exception CX_RSR_X_MESSAG.
>
> i checked note 615389 which talks about "buffering of number range object BIM9999998". the 0REQID is not buffered, but it does not throw any error msg in RSRV to correct the error..
>
> and one more note 1157796 which talks about patches with version BI 7.0.
>
> Now we are in BI 730 with heighest level 0005.
>
> Not sure how to solve this error
>
> Any ideas?
What's your SP? Are you having any master data updates left unattended? Check the Master data objects, check the flows. Related SAP Notes : 914304 / Check 967202(SP10) and 998673(SP11), 1157796, 763203 and 615389
Edited by: Arun Bala G on Feb 12, 2012 9:50 PM -
Error message while loading data from data mart
Please can some one help on this.
While loading data from one cube to another (I am actually creating a backup of original cube) for 1 record I am getting the error message " internal error occured with time split" The long text of error message says Message no. RSAU101Take a look at this thread:
Internal error occured with time split
Hope it helps,
Gilad -
Error encountered while loading data into an Essbase cube from oracle DB
Hi All,
I am trying to load data into an Essbase cube from Oracle db. Essbase is installed in an 64 bit HP-UX machine and oracle database on HP -UX 11.23 B server. While performing the above I am getting the below error messages:
K/INFO - 1021013 - ODBC Layer Error: [08001] ==> [[DataDirect][ODBC Oracle Wire Protocol driver][Oracle]ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directory].
OK/INFO - 1021014 - ODBC Layer Error: Native Error code [1034] .
ERROR - 1021001 - Failed to Establish Connection With SQL Database Server. See log for more information.
Can you please help me out in identifying the issue, as why it could have occured , because of network problem or is there anything related to databse?
Regards,
PriyaThe error is related to Oracle, I would check that it is all up and running
ORA-01034: ORACLE not available
Cheers
John
http://john-goodwin.blogspot.com/ -
Unexpected Essbase error 1090004 while loading data into EssBase
Hi Friends,
am tring to load data into Essbase the following error am getting..
"Unable To Open File [C:\WINDOWS\TEMP\tempfile6051912_1.txt]
Unexpected Essbase error 1090004"
but there is no such file("tempfile6051912_1.txt") in that file path
Can anybody help inthis..
Thanks in Advance...
Edited by: Rakesh on Jul 24, 2012 6:03 PM
Edited by: Rakesh on Jul 24, 2012 6:04 PMHi sukhi...
Am loading data with out selecting any rule file as it's the data file which is extracted from Prod envirement and loading into QA.
I have followed your procedure as i kept data file in (E:\Hyperion\products\Essbase\eas) ,because there no analyticalservices folder as we are using 11.1.1.3 version of hyperion.
still am getting the following error"Unable To Open File [C:\WINDOWS\TEMP\tempfile605252012.txt]
Unexpected Essbase error 1090004"
Thanks for your answer and can u help me in this....... -
Error Occures while loading data from Source system to Target ODS
Hi..
I started loading Records From source system to target ODS.while i running the job i got the following errors.
Record 18211 :ERROR IN HOLIDAY_GET 20011114 00000000
Record 18212 :ERROR IN HOLIDAY_GET 20011114 00000000
sp Please help me in these following Errors..
Thanks in advance,Hello
How r u ?
I think this problem is at the ODS level, ZCAM_O04 is ur ODS Name.
Could u check the ODS Settings, and the Unique Data Records is Checked or Not ?
Best Regards....
Sankar Kumar
+91 98403 47141 -
Hi ,
When i tried to load data into my standard cube the following short dump error occure.
The data was updated to PSA but while updating to further data target (my standard cube) the following error occured:
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RSR_COB_PRO_NOT_FOUND
Date and Time 2010.12.13 10:20:48
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_RSR_COB_PRO_NOT_FOUND' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RSR========================CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_COB_PRO_NOT_FOUND', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
0REQUEST is not a valid characteristic for InfoProviderPlease check the infoobject 0REQUEST, whether it is in active state, if not acivate it.
Check for 0REQUEST Object in Infocube level at characteristics tab, if it is not available try to add this characteristic to cube.
if 0REQUEST is not available, install it from the content and include it in the cube.
rgds, Ghuru -
Runtime Error : UNCAUGHT_EXCEPTION
Hi Solman Experts,
While downloading softwares through Maintenace Optimizer ( Solution Manager ),I am getting below error..
First Error :
Function module /SDF/AL_MAP_TRANSID_LOGH does not exist.
The Maintenance Optimizer can automatically determine which files you require to update the ABAP and Java software components of your systems.
The search is performed for all instances of the selected systems flagged as relevant.
I have already checked in service market place and apply the SAP note 1135893 and we have activate the some components (BC Set)
See Note 898614 after that i am getting big problem.
Second Error : ( ABAP Dump )
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_SOCM_NOT_IMPLEMENTED
Date and Time 31.03.2008 15:04:31
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_SOCM_NOT_IMPLEMENTED' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_CHM1_CHANGE_REQU_INSTANCE==CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_SOCM_NOT_IMPLEMENTED', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
An exception occurred
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
*"UNCAUGHT_EXCEPTION" "CX_SOCM_NOT_IMPLEMENTED"
"CL_CHM1_CHANGE_REQU_INSTANCE==CP" or "CL_CHM1_CHANGE_REQU_INSTANCE==CM009"
"IF_EX_SOCM_CHECK_CONDITION~CHECK_CONDITION"*
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "ALBE0510"
Network address...... "10.201.180.10"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "ALBE0510"
Database type..... "MSSQL"
Database name..... "SP0"
Database user ID.. "sp0"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Oct 23 2007 00:33:51"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 133
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 41898400
Heap.... 0
Page.... 40960
MM Used. 33604960
MM Free. 4099184
User and Transaction
Client.............. 001
User................ "KONS222"
Language key........ "E"
Transaction......... "DSWP "
Transactions ID..... "AE21FFDCBA44F199AB15005056836080"
Program............. "CL_CHM1_CHANGE_REQU_INSTANCE==CP"
Screen.............. "RDSMOP_MAIN 0100"
Screen line......... 5
Information on where terminated
Termination occurred in the ABAP program "CL_CHM1_CHANGE_REQU_INSTANCE==CP" -
in "IF_EX_SOCM_CHECK_CONDITION~CHECK_CONDITION".
The main program was "RDSMOP_MAIN ".
In the source code you have the termination point in line 612
of the (Include) program "CL_CHM1_CHANGE_REQU_INSTANCE==CM009".
Source Code Extract
Line
SourceCde
582
conditions_ok = cl_socm_integration=>false.
583
ENDIF.
584
ENDIF.
585
586
WHEN 'S_USER_CHECK'.
587
conditions_ok = cl_socm_integration=>true.
588
CALL METHOD cl_sm_base_sender=>get_assigned_suser
589
EXPORTING
590
i_no_dialogue = 'X'
591
IMPORTING
592
e_suser = e_suser
593
e_partner_no = lv_parnr
594
EXCEPTIONS
595
no_user_assigned = 1
596
no_customer_number = 2
597
OTHERS = 3.
598
IF sy-subrc = 1 OR sy-subrc = 3.
599
conditions_ok = cl_socm_integration=>false.
600
ENDIF.
601
WHEN 'NO_CRTCL_OBJ'.
602
conditions_ok = me->check_crtcl_obj( ).
603
WHEN '0NO'.
604
conditions_ok = cl_socm_integration=>false.
605
WHEN '0YES'.
606
conditions_ok = cl_socm_integration=>true.
607
WHEN '0BREAK'.
608
BREAK-POINT. "#EC NOBREAK
609
WHEN space.
610
avoid exception since it is the default in table TSOCM_COND_MAPP
611
WHEN OTHERS.
>>>>>
RAISE EXCEPTION TYPE cx_socm_not_implemented.
613
ENDCASE.
614
615
ENDMETHOD.
Please suggest. Thanks in Advance...
Regards,
Suresh KumarHi Ruben,
I have Implemented both notes now i am getting differt error...
Error is : Error No customer numbers in transaction AISUSER ...
Message Number: SOLMAN_SAP_BACKEND016
Diagnosis
There are no entries with a customer number in the 'Customer Number' field in the table AISUSER.
System Response
You cannot get customer number-specific RFC destinations.
Procedure
Maintain these entries manually or start the report
SMBI_AISUSER_VAR_MIG to copy any existing customer number from the table AISDK_CF_OSS_USR.
Please suggest..
Thanks in Advance..
Regards,
Suresh Kumar
Edited by: suresh k on Apr 15, 2008 3:15 PM -
Hi All,
I am getting this error message while loading data in BW. The eeror message is below:
Data not received in PSA Table.
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump.
When I checked the short dump it is as below.
ShrtText
An SQL error occurred when accessing a table.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer termination messages, especially those beyond their normal deletion date.
How to correct the error
Database error text........: "ORA-14400: inserted partition key does not map to any partition"
Internal call code.........: "[RSQL/INSR//BIC/B0000541000 ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search criteria:
How to correct the error
Database error text........: "ORA-14400: inserted partition key does not map to any partition"
Internal call code.........: "[RSQL/INSR//BIC/B0000541000 ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"GP12DW003276UZE34XM7O2QXLER" or "GP12DW003276UZE34XM7O2QXLER"
"INSERT_ODS"
Can someone suggest me what should I check?
Thanks in advance.Thanks a lot Manga. I did what you told and it gave me this error message.
Inconsistency: High value for table /BIC/B0000541000: 0002 ; PARTNO value in RSTSODS: 0022
So you mean to say once I click on correct error button, it should be good. So after that if do the loading, it should not give me this problem if I am right.
But can you tell me what exactly does that error message mean? Also is this not an table space issue. I have to wait to correct that error as DBA is currently looking into it.
Assigned points. Will assign more points if the issue resolves. -
Dear Friends,
i am getting error message while loading data in the cube, yesterday i got the same error message while loading ODS
the error message is as follows:
Value '差旅费 - ERIC BADEN - MEETING WITH E&Y & AYKIM ' (hex. '5DEE65C58D390020002D002000450052004900430020004200') of charac.
Thank you
Mohammad RiazHi
It seems that some updates were done on the source system side and whicle entering the value so character has been enetered which is not identifed by the Bw system.
The data has to be corrected in the source system, you will have to confirm it with your client that what the data should be and for the tiem being you can load it till PSA and correct the data in PSA, and push it manually.
Give the PSA details to your client, it will conatin the data in source system format, and they will know what value has to be changed.
Hope this helps
Regards
Shilpa -
Runtime error while loading data in BI 7.0
Hi All,
While loading data in BI 7.0,
I am getting Runtime Errors "TSV_TNEW_PAGE_ALLOC_FAILED" . No more space available for extending internal table.
As per SAP BASIS SUPPORT comments:
"This is NOT a space problem but rather a huge memory resource consumption one, as you're trying to hold excessive amount of data in Memory, and that's when you get the short dump; I know that SAP sometimes is not clear in explaining the issue (ie "No more storage space available...."), but this refers to memory requirement, not disk storage space per se.
So, please try to break down your data load in smaller sets and this will work OK"
How to proceed with the above comments? How to break down data load in to smaller sets?
Please helpme....there could be various ways -
using selections / filters in Infopackage / DTPs based on may be some period or some other char you could identify based on your data.
Hope it helps
Vikash -
While loading data Runtime error MOVE_TO_LIT_NOTALLOWED_NODATA
Dear Masters
While loading data from r/3 to PSA only, I am getting below error
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
There is no long text, when I clicked Error message, I got below message only
<b> Job terminated in source system > Request set to red</b>
In r/3 side in st22, I got below runtime errors
Runtime Errors <b>MOVE_TO_LIT_NOTALLOWED_NODATA</b>
Short text
Error at assignment: Overwritten protected field.
any other sap notes to fix this issue
Please help me to resolve below issue
Thanks in advance
Raja SHi Raja,
Your error message suggests that there is some overlapping of the filed while you have done the mapping and at the time of extraction this particular field is being tried to be overwritten by some other mapping which is not possible.
Check in your mappings again and load it.
Cheers!
Amit -
Integration Error in ODI while loading data to HFM application
Hello All,
I am performing a integration from source(Flat file) i.e example.csv to classic HFM application I have created an Integration and while loading the data with the all options provided, and if you see these Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory,which is getting as error as properties are not set
these properties are(as a options) is given in the IKM SQL to Hyperion Financial MetaData, but here I am using IKM SQL to Financial Management Data.
I get the following error:-
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 3, in <module>
at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory.
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
Caused by: Traceback (most recent call last):
File "<string>", line 3, in <module>
at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory.
at org.python.core.PyException.fillInStackTrace(PyException.java:70)
at java.lang.Throwable.<init>(Throwable.java:181)
at java.lang.Exception.<init>(Exception.java:29)
at java.lang.RuntimeException.<init>(RuntimeException.java:32)
at org.python.core.PyException.<init>(PyException.java:46)
at org.python.core.PyException.<init>(PyException.java:43)
at org.python.core.Py.JavaError(Py.java:455)
at org.python.core.Py.JavaError(Py.java:448)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:177)
at org.python.core.PyObject.__call__(PyObject.java:355)
at org.python.core.PyMethod.__call__(PyMethod.java:215)
at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
at org.python.core.PyMethod.__call__(PyMethod.java:206)
at org.python.core.PyObject.__call__(PyObject.java:397)
at org.python.core.PyObject.__call__(PyObject.java:401)
at org.python.pycode._pyx15.f$0(<string>:6)
at org.python.pycode._pyx15.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java:165)
at org.python.core.PyCode.call(PyCode.java:18)
at org.python.core.Py.runCode(Py.java:1204)
at org.python.core.Py.exec(Py.java:1248)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
... 19 more
Caused by: com.hyperion.odi.common.ODIHAppException: Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory.
at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
... 33 more
Caused by: com.hyperion.odi.common.ODIHAppException: Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory.
at com.hyperion.odi.hfm.ODIHFMUtil.validateRequiredProperties(ODIHFMUtil.java:87)
at com.hyperion.odi.hfm.ODIHFMMetadataLoader$OptionsMetadataLoad.validate(ODIHFMMetadataLoader.java:66)
at com.hyperion.odi.hfm.ODIHFMMetadataLoader.validateOptions(ODIHFMMetadataLoader.java:188)
at com.hyperion.odi.hfm.ODIHFMAppStatement.validateLoadOptions(ODIHFMAppStatement.java:168)
at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:195)
... 38 moreHi Ujjwal,
I remember Pratik had same issues and he resolved it.
Re: ODI Error while loading data to Classic HFM Application
Hope that fix your issue.
Bhabani -
I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
1. The C2WTS Windows service and C2WTS SharePoint service are both running.
2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support -
An error occurred while loading the model for the item or data source 'EntityDataSource'.
Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan KumarI'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!
Maybe you are looking for
-
Adjustment of inventory between SAP and Legacy system
Hi Gurus, Here is the scenario: 1) One plant within a company code is in SAP and the other plant in a same company code is still in legacy. Since both of them are Not in SAP, I cannot do an STO. But, ROH materials need to be moved from the legacy pl
-
Anytime that a new window is opened (such as when sending an email message or opening a pdf) I am unable to click on the new window. I can't click send or click on the scroll bars of the new window. If I attempt to click on the window it clicks on wh
-
Purchasing Group control - PO and PR - Best Practices?
Hi experts, My client need to implement in the same plant, purchasing group for POs and indirect PRs. They currently have around 5-6 plants in Asia and the design is to group the purchasing group for the plant at the prefix level. Example A01 to
-
Displaying metadata on Mobile Me Web Galleries
Is there way to control what meta data is shown in Mobile ME Galleries. For example I would like to have captions shown in the galleries, but currently only shows master file name.
-
Why PO number is there in Sales Documents? What for we have that field?