Runtime exception occurred during application mapping "EXCEPTION_DURING_EX"

Hi Gurus,
I am getting following error in MONI:
SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_MDM_CMS_Backfeed_Group_</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.MessageMappingExceptio</SAP:P2>
<SAP:P3>n: Runtime exception when processing target-field</SAP:P3>
<SAP:P4>mapping /ns0:BackfeedGroup/group/MasterId; root m~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_MDM_CMS_Backfeed_Group_; com.sap.aii.mappingtool.tf7.MessageMappingException: Runtime exception when processing target-fieldmapping /ns0:BackfeedGroup/group/MasterId; root m~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have tried to refresh the mapping cache and restart the message but stil this message persists.
For me it seems an issue with a wrong mapping or some wrong value in the inbound scenario.
Please suggest if any one of you had come across this error before.
With Reg,
Vikash

Hi Vikash
Whenever you have a problem in your mapping you will get this kind of error in monitoring
According to your log the problem is in parameter /ns0:BackfeedGroup/group/MasterId
First of all check your mapping. If it is fine than check the value of this parameter from your payload.
Also try to copy your xml and test the mapping in IR. Check wether you are getting same error there .
If same error comes than try to manipulate the value of that field and try the same test again
Regards,
Shradha

Similar Messages

Reg: Runtime exception occurred during application mapping

Dear SAP Gurus,
This is Amar Srinivas Eli working currently on SOAP to SOAP Scenario on PI 7.1 Server.
I Would like to inform you that I have done all steps regarding DESIGN and CONFIG and also regarding SERVICE REGISTRY part successfully.
While Testing the data in the WS Navigator by giving the input parameters I am getting an error that
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_HRS_LISTReferral_Response_MM_</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns1:PI_ListRefer</SAP:P3>
<SAP:P4>ral_Response_MT. Values missing in queue context.~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_HRS_LISTReferral_Response_MM_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns1:PI_ListReferral_Response_MT. Values missing in queue context.~</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
These are the steps I did while implementing..
1. Importing the XSD's successfully
2. Developed the design and config part and also checked nearly 3-4 times regarding both REQ and
    RESPONSE Mappings.
3. I already checked the link of WSDL once again...
4. Even I found REsponse Interface once again...
Still I am not getting where the error was ? Please guide me in detail in a right way in this issue.
Regards:
Amar Srinivas Eli
Edited by: Amar Srinivas Eli on Jan 13, 2009 7:53 AM

Hello,
I already checked all those queues and context fields////
Based on my Observation I found
1) As I am unable to view the SOAP BODY I increased the RUN TIME Trace Level to 3 and LOG_VAlue to 3
2) ANother most Important that I found later doing these settings are....
    I found Receiver Pay LOAD and I copied that entire pay load and pasted it in
    REceiver Message Mapping> Test Tab and Code->PASTED...and compared all those parameters
    in the TEST TAB and DEFINITION TAB in Tree View whether all the mandatory receiver mapped
    elements are coming I mean passing from source or not...
OBSERVATION::
I found that for nearly 3 fields there is a difference when I compared on Tree View in DEFINITION TAB and also parallely in the TEST TAB Tree View which I got by copied from MONI,,,,
see for example ::
CENTRE <----
> DISCHARGE DATE..
For going to CENTRE..here I found that in DEfiniition TAB...
Control Act Event-->Subject->document-->Component>Structured body> component> Section>Component>PatientCareProvisionEvent->EffectiveTime-->CENTRE
But immediately I have gone to TEST TAB and TREE VIEW and I found that respective field CENTRE is posting I mean passing any value or parameter to Discharged Date or not...
But I found that...
Control Act Event-->Subject->document-->Component>Structured body> component> Section>Component-->_PatientCareProvisionEvent_
This Implies that Effective Time and Centre are missing in the XML and I mean no values are passing to receiver right..
In PI XSD 's it is there but in I think after Compiling REQUEST MAPPING and while in returning to RESPONSE MAPPING I mean whenever the Response is posting to SOAP WEBSERVICE it is unable to found those target elements and I think due to this...
Am I Correct ?
If that is the case...Let me know where the issue is whether in the data present in the WEBSERVICE created on target side or in PI Side..any issue...
Regards:
Amar Srinivas Eli
Edited by: Amar Srinivas Eli on Jan 13, 2009 10:00 AM

Runtime exception occurred during application mapping

Hi All,
Please find the error message which we are getting:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_CRM_COD_ProductCategoryHierarchy_R~</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns0:ProductCateg</SAP:P3>
<SAP:P4>oryHierarchyMassReplicationRequest/ProductCategor~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_CRM_COD_ProductCategoryHierarchy_R~; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:ProductCategoryHierarchyMassReplicationRequest/ProductCategor~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please give your expert Advice on the same.
Regards
RK

Dear Rableen,
As Muniyappan and peter told about the mandatory field value is missing for the target element
"/ns0:ProductCategoryHierarchyMassReplicationRequest/ProductCategor", I am able to see other fields are also not getting input data.
as below
"Cannot create target element /ns0:ProductCateg"
Request you to test with the payload in message mapping and activate the message mapping first and then edit your operation mapping and call the same message mapping in your operation mapping and activate all your objects.
Thank you!
Regards
Hanumantha Rao

Runtime exception occurred during application mapping in SAP PI

Hi Team,
Please help me regarding this issue is very urgent:
Runtime Error in configuration part:
Here i test the XML message in Receiver Determintion:
Below i am getting error:
Runtime exception occurred during application mapping com/sap/xi/tf/_MaterialStockUpdate_Multi_AllPlant~; com.sap.aii.utilxi.misc.api.BaseRuntimeException:The processing instruction target matching "[xX][mM][lL]" is not allowed
SXMB_MONI:
I am getting below error:
Runtime exception occurred during application mapping

Hi,
Actually my problem is what i am getting,I am trying to test the data in runtime workbench and configuration part copied from inbound payload XML structure .
I already sent the screenshots of above errors,
Configuartion:
Runtime workbench:
This the error i am getting below in "Runtime Workbench"
Error While Sending Message: Additional error text from response: com.sap.engine.interfaces.messaging.api.exception.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=MHEPL_Sandbox_100;TS=;AN=MaterialStockUpdate_Multi_AllPlants_N;ANS=http://www.manipalhospitals.com/his/mm; in the current context [Unknown].

Cannot create target element(Runtime exception occurred during application

Hi ,
this is IDOC TO HTTP Scenario. in error description it is shoein g below error.
Runtime exception occurred during application
Cannot create target element (inbound)
please advice
thank you.

Copy the payload from sxmb_moni and test it in the mapping tool using debug mode. I suspect some mandatory elements in target structure requires value but it is missing during mapping. Sometime sender data structure due to values are not getting at runtime does not create target structure element. Check all the individual fields in the mapping tool.

Exception occurred during XSLT mapping of the application

Hi
While Developing XSLT mapping i got the error message as
<SAP:Code area="MAPPING">TRANSFORMER_EXCEPTION</SAP:Code>
<SAP:P1>OTA_VehAvailRateRQ_XSLT</SAP:P1>
<SAP:P2>http://kcdata.com/OTA_VehAvailRate</SAP:P2>
<SAP:P3>b5351710-4911-11dd-a7f7-ed57ac1600cf</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Exception occurred during XSLT mapping of the application</SAP:Stack>
please provide me your help

Hi all,
The Problem is solved as we later realised the actual problem is with the input XML file provided to us.
We tried using a different XML file which was processed succesfully earlier ..and its working all fine now.
Thanx all,
take care

Runtime exception occurred during execution of application mapping program

Hi all
while testing intergase mapping i am getting this error----->
com/sap/xi/tf/_XI_FI_BAPI_CC_DOCUMENT_POST_REQ_MM:
com.sap.aii.utilxi.misc.api.BaseRuntimeException;RuntimeException in Message-Mapping transgormation:Runtime exception during processing target field mapping
/ns1:BAPI_ACC_DOCUMENT_POST/DOCUMENTHEADER/HEADER_TXT. THE message is:Exception:[java.lang.NullPointerException] in class com.sap.aii.mappingtool.flib3.TextFunction s method substring [null,com.sap.aii.mappingtool.tf3.rt.Context@2388897239]
I had used in the message mapping two user defined function scan you please look into the user defined functions, getPriviousMounthLastDate and FileName in the mapping for the target DocDate field
ihave used even this getPriviousMounthLastDate user defined function before using FileName
this is the code of userdefined function getPriviousMounthLastDate
Calendar cal = Calendar.getInstance();
SimpleDateFormat output = new SimpleDateFormat("yyyyMMdd");
cal.add(Calendar.MONTH,1);
cal.set(Calendar.DAY_OF_MONTH,1);
cal.add(Calendar.MONTH,-1);
cal.add(Calendar.DATE,-1);
StringBuffer dateBuffer = new StringBuffer();
output.format(cal.getTime(),dateBuffer,new FieldPosition(0));
return dateBuffer;
this is the code of userdefined function FileName
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
"http://sap.com/xi/XI/System/File",
"FileName");
String valueOld = conf.get(key);
return valueOld;
thanks sandep
Edited by: sandeep pendyala on Feb 6, 2008 6:52 AM

Hi Sandeep,
                 please check the trace file in SXMB_MONI,
                 which is avialble in response node.
                  if you analyze the trace, u can find-out....
                 error happend because of ehich field.
                first copy the inbound xml from MONI and test it at message mapping.
                 then also, u can find-out the error.
regards
mahesh.

Exception occuring during Application exit.Help needed fast

The Error attached is printed on the console when I exit my Application.My Application is Swing application which reads two or more xml schemas at a time from a local directory and displays the schemas in Tree like structure using JTree,so that mapping can be done using java drag-n-drop apis.
But during System.exit(1) (on Application Close) the exception Attached gets printed.I have invoked Syste.gc() to enforce garbage collection but to no effect.Please help to solve this problem.
Thanks
Pallav
--ERROR printed on console
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x0
Function name=(N/A)
Library=(N/A)
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
     at sun.awt.windows.WToolkit.eventLoop(Native Method)
     at sun.awt.windows.WToolkit.run(WToolkit.java:183)
     at java.lang.Thread.run(Thread.java:479)
Dynamic libraries:
0x00400000 - 0x00405000      S:\software\jdk1.3.1_06\bin\java.exe
0x77F80000 - 0x77FF9000      C:\WINNT\System32\ntdll.dll
0x77DB0000 - 0x77E0A000      C:\WINNT\system32\ADVAPI32.dll
0x77E80000 - 0x77F36000      C:\WINNT\system32\KERNEL32.DLL
0x77D40000 - 0x77DAF000      C:\WINNT\system32\RPCRT4.DLL
0x78000000 - 0x78046000      C:\WINNT\system32\MSVCRT.dll
0x6D420000 - 0x6D4F9000      S:\software\jdk1.3.1_06\jre\bin\hotspot\jvm.dll
0x77E10000 - 0x77E75000      C:\WINNT\system32\USER32.dll
0x77F40000 - 0x77F7C000      C:\WINNT\system32\GDI32.DLL
0x77570000 - 0x775A0000      C:\WINNT\System32\WINMM.dll
0x6D220000 - 0x6D227000      S:\software\jdk1.3.1_06\jre\bin\hpi.dll
0x6D3B0000 - 0x6D3BD000      S:\software\jdk1.3.1_06\jre\bin\verify.dll
0x6D250000 - 0x6D266000      S:\software\jdk1.3.1_06\jre\bin\java.dll
0x6D3C0000 - 0x6D3CD000      S:\software\jdk1.3.1_06\jre\bin\zip.dll
0x6D020000 - 0x6D12A000      S:\software\jdk1.3.1_06\jre\bin\awt.dll
0x77800000 - 0x7781D000      C:\WINNT\System32\WINSPOOL.DRV
0x75E60000 - 0x75E7A000      C:\WINNT\System32\IMM32.dll
0x77A50000 - 0x77B45000      C:\WINNT\system32\ole32.dll
0x6D1E0000 - 0x6D21B000      S:\software\jdk1.3.1_06\jre\bin\fontmanager.dll
0x10000000 - 0x10007000      D:\Program Files\Yahoo!\Messenger\idle.dll
0x72800000 - 0x72846000      C:\WINNT\System32\ddraw.dll
0x728A0000 - 0x728A6000      C:\WINNT\System32\DCIMAN32.dll
0x0D4F0000 - 0x0D503000      D:\PROGRA~1\INCRED~1\bin\ImHook.dll
0x779B0000 - 0x77A45000      C:\WINNT\system32\OLEAUT32.dll
0x6D340000 - 0x6D348000      S:\software\jdk1.3.1_06\jre\bin\net.dll
0x75050000 - 0x75058000      C:\WINNT\System32\WSOCK32.dll
0x75030000 - 0x75044000      C:\WINNT\System32\WS2_32.DLL
0x75020000 - 0x75028000      C:\WINNT\System32\WS2HELP.DLL
0x77840000 - 0x7784C000      C:\WINNT\System32\rnr20.dll
0x77980000 - 0x779A4000      C:\WINNT\System32\DNSAPI.DLL
0x777E0000 - 0x777E8000      C:\WINNT\System32\winrnr.dll
0x77950000 - 0x77979000      C:\WINNT\system32\WLDAP32.DLL
0x777F0000 - 0x777F5000      C:\WINNT\System32\rasadhlp.dll
0x77830000 - 0x7783E000      C:\WINNT\System32\RTUTILS.DLL
0x74FD0000 - 0x74FE1000      C:\WINNT\system32\msafd.dll
0x75010000 - 0x75017000      C:\WINNT\System32\wshtcpip.dll
0x6D2C0000 - 0x6D2DB000      S:\software\jdk1.3.1_06\jre\bin\jpeg.dll
0x77920000 - 0x77942000      C:\WINNT\system32\imagehlp.dll
0x72A00000 - 0x72A2D000      C:\WINNT\system32\DBGHELP.dll
0x690A0000 - 0x690AB000      C:\WINNT\System32\PSAPI.DLL
Local Time = Thu May 29 17:43:20 2003
Elapsed Time = 396
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.3.1_06-b01 mixed mode)

to bbritta,
Sorry it did not help.By the way i am using windows 2000 Server.Application Server is Weblogic 7.0.No exception is shown in the Weblogic console also.
There is no problem in drawing of maps.Drag-n-Drop is working perfectly.But during application exit this errors occuring.
Thanks for your attempt.
Pallav

Java.lang.NullPointerException thrown during application mapping

HI Experts,
Iam geeting the following Error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = BC6</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-10-24T11:58:13Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 6620A370822811DC97A800132165C741</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0003</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0003</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = BC6</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-10-24T11:58:14Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO90__0002</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = BC6</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-10-24T11:58:14Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
<Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV" />
- 
<Trace level="1" type="T">Interface Mapping http://atmel.com/xi/ModelN_IntegrationScenarios IM_QUOT_CRE</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_MM_QUOT_CRE_</Trace>
<Trace level="1" type="T">java.lang.NullPointerException at com.sap.aii.mappingtool.tf3.AMappingProgram.exceptionCaught$(AMappingProgram.java:59) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:182) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:170) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor423.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy149.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7701) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2376) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1700) at com.sap.mw.jco.JCO$Server.listen(JCO.java:8061) at com.sap.mw.jco.JCO$Server.work(JCO.java:8181) at com.sap.mw.jco.JCO$Server.loop(JCO.java:8128) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:124)</Trace>
<Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_QUOT_CRE_: java.lang.NullPointerException; null</Trace>
<Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_QUOT_CRE_: java.lang.NullPointerException; null at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor423.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy149.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7701) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2376) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1700) at com.sap.mw.jco.JCO$Server.listen(JCO.java:8061) at com.sap.mw.jco.JCO$Server.work(JCO.java:8181) at com.sap.mw.jco.JCO$Server.loop(JCO.java:8128) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:124) Root Cause: java.lang.NullPointerException at com.sap.aii.mappingtool.tf3.AMappingProgram.exceptionCaught$(AMappingProgram.java:59) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:182) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:170) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor423.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy149.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7701) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2376) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1700) at com.sap.mw.jco.JCO$Server.listen(JCO.java:8061) at com.sap.mw.jco.JCO$Server.work(JCO.java:8181) at com.sap.mw.jco.JCO$Server.loop(JCO.java:8128) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:124)</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
Plz Send solution
Regards,
venky

hi venkatesh,
as far as i see.. i feel there is some mistake in the mapping or configuration part. to be frank, i am not sure of the problem.
i suggest you to please check your design and configuration with the help of the below links:
Any flat file to any IDoc
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?
path=/display/profile/2007/05/11/FileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
you can reply on the thread and would be there to help you

Why Application doesnt stop when a runtime exception occurs

Hi All,
When we are writing a program and if it throws a Runtime Exception occurs it halts. Right? But if we are deploying an application in any server and id the app throws a Runrime Exception, the application doesnt halts?
What is the logic behind this? What must be the appserver playing a role in this situation?
Regards
Naveen

It's up to the programmer. With a simple stand alone program there's generally no point in it continuing past a runtime error, because if there's a runtime error you need to fix the program and try again.
On the other hand a server is likely to be running a number of fairly independant activities. For example there may be a program error in one servlet, for one web page, but the rest of the site may be fine. So it's more sensible to log the error, report an error to the user, and continue.
Also with threading a runtime error typically kills only the one thread, not the rest of the application.
You can chose to catch any kind of exception (except for the very rare JVM errors).

Exception occurred during event dispatching:java.lang.NoSuchMethodError

Hello,
We have upgraded to the latest Oracle Application Server version 10.1.2.3.0 and the webutil version is 1.0.6.
But we face the following error while accessing the web link. Following message captured from Java Console.
Please suggest if you have any solutions/idea about this error. Thanks !
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
Maximum size: 50 MB
Compression level: 0----------------------------------------------------
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Downloading http://si02938.in.irt.com:7778/forms/java/frmall_jinit.jar to JAR cacheDownloading http://si02938.in.irt.com:7778/forms/java/frmwebutil.jar to JAR cacheDownloading http://si02938.in.irt.com:7778/forms/java/jacob.jar to JAR cacheDownloading http://si02938.in.irt.com:7778/forms/java/FileInformation.jar to JAR cacheDownloading cacheproxyHost=nullproxyPort=0connectMode=HTTP, native.
Forms Applet version is : 10.1.2.3
Exception occurred during event dispatching:java.lang.NoSuchMethodError at oracle.forms.webutil.common.VBeanCommon.init(VBeanCommon.java:281) at oracle.forms.handler.UICommon.instantiate(Unknown Source) at oracle.forms.handler.UICommon.onCreate(Unknown Source) at oracle.forms.handler.JavaContainer.onCreate(Unknown Source) at oracle.forms.engine.Runform.onCreateHandler(Unknown Source) at oracle.forms.engine.Runform.processMessage(Unknown Source) at oracle.forms.engine.Runform.processSet(Unknown Source) at oracle.forms.engine.Runform.onMessageReal(Unknown Source) at oracle.forms.engine.Runform.onMessage(Unknown Source) at oracle.forms.engine.Runform.processEventEnd(Unknown Source) at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source) at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source) at java.awt.Component.dispatchEventImpl(Unknown Source) at java.awt.Container.dispatchEventImpl(Unknown Source) at java.awt.Component.dispatchEvent(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source)
Edited by: user12233243 on Nov 16, 2009 10:28 PM
Edited by: user12233243 on Nov 16, 2009 10:29 PM

hi
read the following configuration i hope it will help u.
How to get up and running with WebUtil 1.06 included with Oracle Developer Suite 10.1.2.0.2 on a win32 platform
Solution
Assuming a fresh "Complete" install of Oracle Developer Suite 10.1.2.0.2,
here are steps to get a small test form running, using WebUtil 1.06.
Note: [OraHome] is used as an alias for your real oDS ORACLE_HOME.
Feel free to copy this note to a text editor, and do a global find/replace on
[OraHome] with your actual value (no trailing slash). Then it is easy to
copy/paste actual commands to be executed from the note copy.
1) Download http://prdownloads.sourceforge.net/jacob-project/jacob_18.zip
and extract to a temporary staging area. Do not attempt to use 1.7 or 1.9.
2) Copy or move jacob.jar and jacob.dll
[JacobStage] is the folder where you extracted Jacob, and will end in ...\jacob_18
cd [JacobStage]
copy jacob.jar [OraHome]\forms\java\.
copy jacob.dll [OraHome]\forms\webutil\.
The Jacob staging area is no longer needed, and may be deleted.
3) Sign frmwebutil.jar and jacob.jar
Open a DOS command prompt.
Add [OraHome]\jdk\bin to the PATH:
set PATH=[OraHome]\jdk\bin;%PATH%
Sign the files, and check the output for success:
[OraHome]\forms\webutil\sign_webutil [OraHome]\forms\java\frmwebutil.jar
[OraHome]\forms\webutil\sign_webutil [OraHome]\forms\java\jacob.jar
4) If you already have a schema in your RDBMS which contains the WebUtil stored code,
you may skip this step. Otherwise,
Create a schema to hold the WebUtil stored code, and privileges needed to
connect and create a stored package. Schema name "WEBUTIL" is recommended
for no reason other than consistency over the user base.
Open [OraHome]\forms\create_webutil_db.sql in a text editor, and delete or comment
out the EXIT statement, to be able to see whether the objects were created witout
errors.
Start SQL*Plus as SYSTEM, and issue:
CREATE USER webutil IDENTIFIED BY [password]
DEFAULT TABLESPACE users
TEMPORARY TABLESPACE temp;
GRANT CONNECT, CREATE PROCEDURE, CREATE PUBLIC SYNONYM TO webutil;
CONNECT webutil/[password]@[connectstring]
@[OraHome]\forms\create_webutil_db.sql
-- Inspect SQL*Plus output for errors, and then
CREATE PUBLIC SYNONYM webutil_db FOR webutil.webutil_db;
Reconnect as SYSTEM, and issue:
grant execute on webutil_db to public;
5) Modify [OraHome]\forms\server\default.env, and append [OraHome]\jdk\jre\lib\rt.jar
to the CLASSPATH entry.
6) Start the OC4J instance
7) Start Forms Builder and connect to a schema in the RDBMS used in step (4).
Open webutil.pll, do a "Compile ALL" (shift-Control-K), and generate to PLX (Control-T).
It is important to generate the PLX, to avoid the FRM-40039 discussed in
Note 303682.1
If the PLX is not generated, the Webutil.pll library would have to be attached with
full path information to all forms wishing to use WebUtil. This is NOT recommended.
8) Create a new FMB.
Open webutil.olb, and Subclass (not Copy) the Webutil object to the form.
There is no need to Subclass the WebutilConfig object.
Attach the Webutil.pll Library, and remove the path.
Add an ON-LOGON trigger with the code
NULL;
to avoid having to connect to an RDBMS (optional).
Create a new button on a new canvas, with the code
show_webutil_information (TRUE);
in a WHEN-BUTTON-PRESSED trigger.
Compile the FMB to FMX, after doing a Compile-All (Shift-Control-K).
9) Under Edit->Preferences->Runtime in Forms Builder, click on "Reset to Default" if
the "Application Server URL" is empty.
Then append "?config=webutil" at the end, so you end up with a URL of the form
http://server:port/forms/frmservlet?config=webutil
10) Run your form.
If its Correct/Helpful please mark it thanks.
Sarah

Exception occured during invocation of JCA binding ORA-01403: no data found ORA-06512: at line 1

Dear Legends,
My requirement is to call store procedure from BPEL. So for I created a BPEL with 2 assign activity and 1 Invoke activity to Invoke the DB adapter. After Deploying I tested the process but it shows the following error:
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DB_SBL_SPROCS1' failed due to: Interaction processing error.
Error while processing the execution of the SIEBEL.PORTAL_SPROCS.ACP_CONREGISTRATIONLOOKUP_WRAP API interaction.
An error occurred while processing the interaction for invoking the SIEBEL.PORTAL_SPROCS.ACP_CONREGISTRATIONLOOKUP_WRAP API. Cause: java.sql.SQLException: ORA-01403: no data found
ORA-06512: at line 1
Check to ensure that the XML containing parameter data matches the parameter definitions in the XSD. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-1403" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary></part><part name="detail"><detail>ORA-01403: no data found
ORA-06512: at line 1
</detail></part><part name="code"><code>1403</code></part></bindingFault></bpelFault></fault><faultType>
<message>0</message></faultType></messages></details></event><event sid="BpPrc0.1" cat="2" n="16" date="2013-08-08T05:39:39.121-04:00" type="4"><message>"BPELFault" has not been caught by a catch block.</message></event><event sid="BpPrc0.1" cat="2" n="17" date="2013-08-08T05:39:39.270-04:00" type="3"><message>The transaction was rolled back. The work performed for bpel instance "960968" was rolled back, but the audit trail has been saved for this instance.If this is a sync request, please resubmit the request from the client. If it is an async request, please recover from the recovery console by resubmitting the invoke message.</message></event></audit-trail>
What does the above error says?
1. Whether concern Grant or Execute Privileges is not properly provided to the user?
2. Is there any Dangling Privileges are prevailing?
3. Is that the Store Procedure to be Handled with an Error Handling by means of Exception?
4. Is that I have been giving wrong test data?
5. Is that No data being existing in the Procedure?
6. Is that anything related to XA and NON-XA Data Source?
Any kind of help would be much appreciated. Thanks in Advance.
Thanks,
Karthik

Can you check the following ?
a. Hopefully the when you execute the procedure using sql tool it works fine and returns data.
b. Is there any input parameter available for procedure ?
c. IF yes, is the parameter is mapped with the procedure parameter and populated with value before calling the procedure ?
d. In the audit trial, you can see from the invoke activity to see whether the parameter is populated with value or not ?
e. Check the input parameter by executing the procedure with sql tool to see whether this request is receiving any data in return or not ?
Thanks,
Vijay

SQL exception occurred during PL/SQL upload (Web ADI)

Hi,
I am having issue loading data using Web ADI, I am getting "SQL exception occurred during PL/SQL upload" error, I tried to restart Apache, also looked into the BNE.log file for the exact error but I am still not sure about this exception, can anyone please help?
bne:text="SQL exception occurred during PL/SQL upload."
bne:cause="Database insert error"
RDBMS: 11.2.0.3.0
Oracle Applications: 12.0.6
Thanks,
Bharat

I am having issue loading data using Web ADI, I am getting "SQL exception occurred during PL/SQL upload" error, I tried to restart Apache, also looked into the BNE.log file for the exact error but I am still not sure about this exception, can anyone please help?Please rename the log file, reproduce the issue and check the log file then.
bne:text="SQL exception occurred during PL/SQL upload."
bne:cause="Database insert error"Please see these docs.
R12 Uploading Intercompany Transactions Shows SQL Exception Occurred During PL/SQL Upload [ID 1234063.1]
Batch Element Entry (BEE) Spreadsheet Interface > 10 Rows Fails with Error: 'SQL exception occured during PL/SQL Upload.' [ID 388012.1]
How Do You Setup An AGIS Transaction That Has Several Transaction Lines For The Same Transaction [ID 946499.1]
FCH: Error: "The upload process has completed with errors. Please Close to return to the document and fix the errors. - No rows uploaded - <999> rows were invalid" During WebADI Data Upload [ID 553025.1]
R12: Legal Entity Name must be < 31 characters. [ID 472505.1]
Oracle Payroll 'Batch Element Entry ( BEE )' Frequently Asked Questions ( FAQ ) [ID 1353021.1]
Thanks,
Hussein

SQL exception occurred during PL/SQL upload in WEB ADI Upload

Hi All,
I created Custom Integrator with META DATA as Update. This Integrator Downloads the data and will update the date. Once it is updated, I am uploading the same. For Quite Some Time, Everything is working fine and no issue.
All of Suddenly , I am getting the error message 'SQL exception occurred during PL/SQL upload.' When I am trying to update and upload the values in the same custom integrator.
My Oracle Apps and DB Version are
RDBMS : 11.1.0.7.0
Oracle Applications : 12.1.3
Any Help is appreciated.

I found the issue. If you check read only check box for the mandataory parameters that Package is using, then we get this issue. Try to avoid read only check box for mandatory parameters in th epackage.
For Example.
I am using hr_person_extra_info_api.update_person_extra_info API in my custom package, In this API, p_person_extra_info_id is the mandaory parameter.
I am trying to download the data and updating the data and uploading the values with the custom WEB ADI. In the custom layout, I checked ready only box to parameter 'p_person_extra_info_id '. With this I am getting issue 'SQL exception occurred during PL/SQL upload in WEB ADI Upload'.
again I unchecked the read only button to this 'p_person_extra_info_id ' Parameter. It is uplaoding and working with no issues.
Thanks Guys for all your help.

EJB Exception occurred during invocation from home or business:

Friends,
I have ejb application deployed in weblogic 10.3 with cluster environment. I have configured the following ejb-jar.xml
<session>
<ejb-name>PartSL</ejb-name>
<home>com.gm.tm.ejb.session.part.PartSLHome</home>
<remote>com.gm.tm.ejb.session.part.PartSL</remote>
<ejb-class>com.gm.tm.ejb.session.part.PartSLBean</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
<ejb-ref>
<ejb-ref-name>ejb/PartBM</ejb-ref-name>
<ejb-ref-type>Entity</ejb-ref-type>
<home>com.gm.tm.ejb.entity.partbm.PartHome</home>
<remote>com.gm.tm.ejb.entity.partbm.Part</remote>
<ejb-link>PartBM</ejb-link>
</ejb-ref>
<resource-ref>
<description></description>
<res-ref-name>jdbc/ToolMoveDS</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</session>
Sometimes when user doing some manupulation, this object getting disapper and getting the error as EJB Exception occurred during invocation from home or business: com.gm.tm.ejb.session.part.PartSL_ex1s88_HomeImpl@175f214 threw exception: javax.ejb.EJBException: nested exception is: javax.naming.LinkException: [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'PartBM'. Resolved '' [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'PartBM'. Resolved '']; remaining name 'PartBM']; Link Remaining Name: 'PartBM'>
JNDI tree is clusterable but is incompatible. Make sure all the servers in the cluster use the identical copy of object.
Pls let me know if anyone know the root cause and i am new to EJB too. So pls help if anyone know better solution for this

Yes exactly..Let me explain clearly. assume its deployed now and user started using that particular module. It works fine. Later point time like after few days or after few simultenous navigation of that particular ejb jndi object from the application, this exception comes. So for the short time fix, i restart the server and it will work fine and then after few hours/days , this exception comes and i need to restart again. So i need a permanent solution to avoid this issue.

Runtime exception occurred during application mapping "EXCEPTION_DURING_EX"

Similar Messages

Maybe you are looking for