RV082 DUAL WAN with the same Provider
Hello,
I have bought the RV082 Router. Till today we use one WAN port and connect to DSL from T-Online here in Germany.
Now there is a second T-Online connection in the office. In the past it was used from our partner, but now it's free.
So it is possible to connect the second WAN port to this T-Online connection and sharing the bandwidth?
Thank you for helping
best regards
Frank
i very much doubt that getting a phoneline and an internet connection at the same time is the issue here.Since your internet connection is dropping on the wireless only.Now if the phoneline was indeed interfering, you would be losing connections on the wired PC's as well.
As you already have the latest firmware installed, try and change a few wireless settings, like diff channels , enable 64 bit WEP . check what happens.
Similar Messages
-
How do i create more than one account in Mail with the same isp?
I am using suddenlink and have set up one account for Mail. It seems to work ok. I want to set up two others with the same provider but can't.
Let's call the first account, account1
It works.
I set up another and call it account2.
It is using the same provider which already has the account set up on their end, but how do I set it up to work on my end? Does it need to use the same username as account1 or can it use the user name for account2? I hope this makes sense.
I just want to use three email addresses from the same provider with mail. I need some help. Please?Initially you need to configure via the provider's own web based control panel multiple e-mail accounts. If they don't have one, work it out with their customer support to have three distinct mail accounts. Then you can setup multiple logins by adding new accounts to mail. Since mail checks all accounts per Mac OS X user account simultaneously, it probably is best to use different usernames on the same internet provider. If you don't want mail to show all the information from all three mail accounts simultaneously, configure Apple menu -> System Preferences -> Accounts to have multiple users on your computer, and configure each of the internet service provider accounts for each separaet user on Mac OS X.
Message was edited by: a brody -
I am facing this problem while start debugging the Provider-Hosted app through VS2013. I want to deploy the app with same version. So please let me know any solution
to remove the app instance from office365 online, so that I can deploy the same app with same version on the specified "Developer Site".
Note: If I change the version in AppManifesst.xml file then this problem/error gets resolved. But I want to deploy with the same version as
per my business requirement.
The actual error renders while I click to "Start" button of the Visual Studio 2013 to deploy the provider-hosted app, for the sake
to deploying it on say "ABC" site collection (i.e. developer site). I work on office365 online. Therefore, request you to please provide the solution for SharePoint online office 365. The occurrences is:
"Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the
same version and product ID."
Please assist me anyone. It will be so kind of you.....
Naveen Kumar
Steria India Ltd.Did you updated the AppManifest.xml file
and change the version.
If this helped you resolve your issue, please mark it Answered -
I installed Adobe FlashPlayer version 13.0 however I am getting an error message "Plug in error". Can anybody provide an answer. I already uninstall the version and install it again with the same results. Thanks.
Adobe admits to a Flash problem here:
http://forums.adobe.com/message/6285851#6285851
YOu can apply the fix they show and tehn wait for them to fix the problem -
I have an OS X 10.6.8 and have had problems with my mail. I have changed my account settings with my mail provider, but they suggest I now delete my account and add a new account with the same email address. Will this delete my email history? Can anyone please advise?
I have the same problem as the emails go to my iCloud account that I cannot access!!! I cannot answer the security questions as someone else must have set up my iCloud account. Nothing seems to work. It would be great if someone has some ideas as what can be done to recover the situation?
-
Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?
Roamingnome, thanks for your response. Although I have been a Bell (Canada) customer for my WiFi signal for years, the 5c and its necessary mobility plan, is very recent. Some years ago, Bell supplied its own ‘router’ for my computer, and claimed that it was possible to get their WiFi signal only with the router they supplied. When I recently received the 5c, I wondered if the plan it requires, which is within the much wider, overall Bell zone, could be used somehow to get my Air online - some sort of tethering? - that allows me to give up the Air WiFi service and router all together, but still get the Air connected. Here in Canada, Bell Mobility and other Bell services are very separate. Any suggestions appreciated.
-
Here's the situation:
Upgrading a SharePoint Server 2010 Search Service Application dB to our SharePoint 2013 SP 1 development environment, using the Management Shell
Running the following commands:
$applicationPool= Get-SPServiceApplicationPool -Identity 'SearchService_AppPool'
$searchInst = Get-SPEnterpriseSearchServiceInstance -local
Restore-SPEnterpriseSearchServiceApplication -Name 'SearchServiceApplication' -applicationpool $applicationPool -databasename 'SearchServiceApplicationDB' -databaseserver SERVERNAME -AdminSearchServiceInstance $searchInst
Creates the search dBs (crawl, links, analytics) successfully; however, in the end, I get....
"Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed."
Looking at the ULS logs, I find the following:
Inner Exception: An item with the same key has already been added.
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add) at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.FindAndFixExistingManagedProperties() at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.InstallManagedProperties(Boolean
upgrade) at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.Upgrade() at Microsoft.Office.Server.Search.Upgrade.UpdateAllOOTBProperties.Upgrade() at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed.
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade() at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.Upgrade() at Microsoft.Office.Server.Search.Upgrade.SearchDatabaseSequence.Upgrade() at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object
o, Boolean bRecurse)
Anyone encounter anything like this during their search upgrade process? I'm not honestly even sure what duplicate value to look for at this point, if I were to run a SELECT Id, ClassId, ParentId, Name, Status, Version, Properties FROM Objects on
"SharePoint_Config" in SSMS. Any insight or opinions on the matter are welcome; and thanks to those who choose to reply to this, in advance.Hi ,
You can enable the ULS log on verbose level (note, remember to reset to default level after finished troubleshooting) for more information per the following article, then check there should be more useful message for helping solve the issue.
http://www.brightworksupport.com/enabling-verbose-logging-to-compare-against-c/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/12c99279-d3aa-46de-bc57-d5d250692ff0/upgrade-of-search-service-application-from-2010-to-2013-failure?forum=sharepointadmin
https://www.simple-talk.com/blogs/2014/04/22/sharepoint-2010-to-2013-search-service-application-upgrade-issueaction-15-0-80-0-fails/http://blogs.msdn.com/b/biyengar/archive/2009/10/27/psconfig-failure-with-error-an-item-with-the-same-key-has-already-been-added.aspx
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support -
So, the problem is,
I used these school Macs right? They're school handed and stuff. Then one day I decided I want admin so I do this thing where I "reset" everything on the Macbook using this Video (at the bottom) http://www.wikihow.com/Reset-a-Lost-Admin-Password-on-Mac-OS-X
Then I do it, it takes me to the new User. That's not what I want so I shut down, then made an account with the same name as my current account (let's call it Y). Then I delete Y on purpose. I deleted it because I didn't want my school to know I had this account. Realise I wanted it again so I made an account, let's call it X then when I have X I deleted Y. Then I realised my AirDrop name said X so then I made a new account, this time let's call it Z, with Z I delete X and then I deleted Z because I don't want my school to know I have Z but then Z is also the same name as my main/current account. Somehow or something I delete my current account leaving me with Z. Now I can see my account and stuff but don't know how to restore it.
Picture will be provides later.
PLEASE PLEASE PLEASE HELP ME. I HAVE SCHOOL TOMORROW AND I DON'T WANT MY PARENTS TO FIND OUT.It is a bad idea to hack computer passwords when you don't own the computer
Good luck with the school and the parents. -
I have a Problem with Romming Between SSIDs withing the same WLC but with deferent VLAN .
HI All,
I have a Problem with Romming Between SSIDs withing the same WLC but with deferent VLAN . the WLC are providing the HQ and one of the Branches the Wireless services .
Am using all the available 9 SSIDs at the HQ , and am using only 4 of it at the Brnche.
The problem that i have are happening only at the Branch office as i cant room between the SSIDs within Diferent VLANs but i can do it with the one that pointing to the same VLAN. Once the client ( Laptop/Phone ) connected to one of the SSIDs. it imposiible to have him connected to the other ones with Different VLAN. meanwhile, It says its connected to the other SSID but its not getting IP from that pool.
here is the Show Run-Config from my WLC .. and the Problem happening between the SSID AMOBILE and ASTAFF. i have the Debug while am switching between the SSIDs if needed .
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.11.04 10:20:47 =~=~=~=~=~=~=~=~=~=~=~=
show run-config
Press Enter to continue...
System Inventory
NAME: "Chassis" , DESCR: "Cisco 5500 Series Wireless LAN Controller"
PID: AIR-CT5508-K9, VID: V01, SN: FCW1535L01G
Burned-in MAC Address............................ 30:E4:DB:1B:99:80
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 12
Press Enter to continue or <ctrl-z> to abort
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.235.0
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27
Build Type....................................... DATA + WPS
System Name...................................... WLAN Controller 5508
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
IP Address....................................... 10.125.18.15
Last Reset....................................... Software reset
System Up Time................................... 41 days 5 hrs 14 mins 42 secs
System Timezone Location......................... (GMT -5:00) Eastern Time (US and Canada)
Current Boot License Level....................... base
Current Boot License Type........................ Permanent
Next Boot License Level.......................... base
Next Boot License Type........................... Permanent
Configured Country............................... US - United States
--More or (q)uit current module or <ctrl-z> to abort
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +36 C
External Temperature............................. +20 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 10
Number of Active Clients......................... 61
Burned-in MAC Address............................ 30:E4:DB:1B:99:80
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 12
Press Enter to continue or <ctrl-z> to abort
AP Bundle Information
Primary AP Image Size
ap3g1 5804
ap801 5192
ap802 5232
c1100 3096
c1130 4972
c1140 4992
c1200 3364
c1240 4812
c1250 5512
c1310 3136
c1520 6412
c3201 4324
c602i 3716
Secondary AP Image Size
ap801 4964
c1100 3036
--More or (q)uit current module or <ctrl-z> to abort
c1130 4884
c1140 4492
c1200 3316
c1240 4712
c1250 5064
c1310 3084
c1520 5244
c3201 4264
Press Enter to continue or <ctrl-z> to abort
Switch Configuration
802.3x Flow Control Mode......................... Disable
FIPS prerequisite features....................... Disabled
secret obfuscation............................... Enabled
Strong Password Check Features:
case-check ...........Enabled
consecutive-check ....Enabled
default-check .......Enabled
username-check ......Enabled
Press Enter to continue or <ctrl-z> to abort
Network Information
RF-Network Name............................. OGR
Web Mode.................................... Disable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Enable
OCSP........................................ Disabled
OCSP responder URL..........................
Secure Shell (ssh).......................... Enable
Telnet...................................... Disable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
AP Multicast/Broadcast Mode................. Unicast
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Enabled
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Disable
Mgmt Via Dynamic Interface.................. Disable
--More or (q)uit current module or <ctrl-z> to abort
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Web Auth Proxy Redirect ................... Disable
Fast SSID Change ........................... Enabled
AP Discovery - NAT IP Only ................. Enabled
IP/MAC Addr Binding Check .................. Enabled
Press Enter to continue or <ctrl-z> to abort
Port Summary
STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE SFPType
1 Normal Forw Enable Auto 1000 Full Up Enable N/A 1000BaseTX
2 Normal Disa Enable Auto Auto Down Enable N/A Not Present
3 Normal Disa Enable Auto Auto Down Enable N/A Not Present
4 Normal Disa Enable Auto Auto Down Enable N/A Not Present
5 Normal Disa Enable Auto Auto Down Enable N/A Not Present
6 Normal Disa Enable Auto Auto Down Enable N/A Not Present
7 Normal Disa Enable Auto Auto Down Enable N/A Not Present
8 Normal Disa Enable Auto Auto Down Enable N/A Not Present
Press Enter to continue or <ctrl-z> to abort
AP Summary
Number of APs.................................... 8
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
KNOWLOGY_DC01 2 AIR-LAP1131AG-A-K9 00:1d:45:86:ed:4e KNOWLOGY_DC_Serv 1 US 1
KNOWLOGY_DC02 2 AIR-LAP1131AG-A-K9 00:21:d8:36:c5:c4 KNOWLOGY_DC_Serv 1 US 1
KN1252_AP01 2 AIR-LAP1252AG-A-K9 00:21:d8:ef:06:50 Knowlogy Confere 1 US 1
KN1252_AP02 2 AIR-LAP1252AG-A-K9 00:22:55:8e:2e:d4 Server Room Side 1 US 1
Anham_AP03 2 AIR-LAP1142N-A-K9 70:81:05:88:15:b5 default location 1 US 1
ANHAM_AP01 2 AIR-LAP1142N-A-K9 70:81:05:b0:e4:62 Small Conference 1 US 1
ANHAM_AP04 2 AIR-LAP1131AG-A-K9 00:1d:45:86:e1:b8 Conference room 1 US 1
ANHAM_AP02 2 AIR-LAP1142N-A-K9 70:81:05:96:7a:49 Copy Room 1 US 1
AP Tcp-Mss-Adjust Info
AP Name TCP State MSS Size
KNOWLOGY_DC01 disabled -
KNOWLOGY_DC02 disabled -
--More or (q)uit current module or <ctrl-z> to abort
KN1252_AP01 disabled -
KN1252_AP02 disabled -
Anham_AP03 disabled -
ANHAM_AP01 disabled -
ANHAM_AP04 disabled -
ANHAM_AP02 disabled -
Press Enter to continue or <ctrl-z> to abort
AP Location
Total Number of AP Groups........................ 3
Site Name........................................ ANHAM8075
Site Description................................. ANHAM 8075 Location
WLAN ID Interface Network Admission Control Radio Policy
1 knowlogy_ogr Disabled None
6 knowlogy_ogr Disabled None
9 knowlogy_ogr Disabled None
7 knowlogy_ogr Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
Anham_AP03 2 AIR-LAP1142N-A-K9 70:81:05:88:15:b5 default location 1 US 1
ANHAM_AP01 2 AIR-LAP1142N-A-K9 70:81:05:b0:e4:62 Small Conference 1 US 1
ANHAM_AP04 2 AIR-LAP1131AG-A-K9 00:1d:45:86:e1:b8 Conference room 1 US 1
ANHAM_AP02 2 AIR-LAP1142N-A-K9 70:81:05:96:7a:49 Copy Room 1 US 1
Site Name........................................ Knowlogy_DC
--More or (q)uit current module or <ctrl-z> to abort
Site Description................................. DC Center Access points
WLAN ID Interface Network Admission Control Radio Policy
2 knowlogy_ogr Disabled None
4 knowlogy_ogr Disabled None
3 knowlogy_ogr Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
KNOWLOGY_DC01 2 AIR-LAP1131AG-A-K9 00:1d:45:86:ed:4e KNOWLOGY_DC_Serv 1 US 1
KNOWLOGY_DC02 2 AIR-LAP1131AG-A-K9 00:21:d8:36:c5:c4 KNOWLOGY_DC_Serv 1 US 1
Site Name........................................ OGR
Site Description................................. 1934 OGR Office
WLAN ID Interface Network Admission Control Radio Policy
1 knowlogy_ogr Disabled None
2 knowlogy_ogr Disabled None
4 knowlogy_ogr Disabled None
6 knowlogy_ogr Disabled None
--More or (q)uit current module or <ctrl-z> to abort
7 knowlogy_ogr Disabled None
9 knowlogy_ogr Disabled None
8 knowlogy_ogr Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
KN1252_AP01 2 AIR-LAP1252AG-A-K9 00:21:d8:ef:06:50 Knowlogy Confere 1 US 1
KN1252_AP02 2 AIR-LAP1252AG-A-K9 00:22:55:8e:2e:d4 Server Room Side 1 US 1
Site Name........................................ default-group
Site Description................................. <none>
WLAN ID Interface Network Admission Control Radio Policy
1 knowlogy_ogr Disabled None
2 knowlogy_ogr Disabled None
3 knowlogy_ogr Disabled None
4 knowlogy_ogr Disabled None
5 knowlogy_ogr Disabled None
6 knowlogy_ogr Disabled None
7 knowlogy_ogr Disabled None
8 knowlogy_ogr Disabled None
--More or (q)uit current module or <ctrl-z> to abort
9 knowlogy_ogr Disabled None
10 management Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
Press Enter to continue or <ctrl-z> to abort
AP Config
Cisco AP Identifier.............................. 6
Cisco AP Name.................................... KNOWLOGY_DC01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:1d:45:86:ed:4e
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.100
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................ wireless.knowlogy.com
Primary Cisco Switch IP Address.................. 10.125.18.15
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or <ctrl-z> to abortIP Address.................. 10.125.18.15
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
--More or (q)uit current module or <ctrl-z> to abort
Reset Button..................................... Enabled
AP Serial Number................................. FTX1134T0QG
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 22
WLAN 2 :........................................ 21
WLAN 4 :........................................ 25
WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 48 days, 20 h 19 m 18 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:33 2013
Join Taken Time.................................. 0 days, 00 h 10 m 47 s
--More or (q)uit current module or <ctrl-z> to abort
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211b
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 3
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:1d:71:09:8f:90
Operation Rate Set
1000 Kilo Bits........................... MANDATORY
2000 Kilo Bits........................... MANDATORY
5500 Kilo Bits........................... MANDATORY
11000 Kilo Bits.......................... MANDATORY
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
--More or (q)uit current module or <ctrl-z> to abort
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 11
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
--More or (q)uit current module or <ctrl-z> to abort
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy DSSS parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 11
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
Current CCA Mode .......................... 0
ED Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
--More or (q)uit current module or <ctrl-z> to abort
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Cisco AP Identifier.............................. 6
Cisco AP Name.................................... KNOWLOGY_DC01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:1d:45:86:ed:4e
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.100
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
--More or (q)uit current module or <ctrl-z> to abort
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................ wireless.knowlogy.com
Primary Cisco Switch Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
--More or (q)uit current module or <ctrl-z> to abort
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
AP Serial Number................................. FTX1134T0QG
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 22
WLAN 2 :........................................ 21
WLAN 4 :........................................ 25
WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
--More or (q)uit current module or <ctrl-z> to abort
AP Up Time....................................... 48 days, 20 h 19 m 18 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:33 2013
Join Taken Time.................................. 0 days, 00 h 10 m 47 s
Attributes for Slot 1
Radio Type................................... RADIO_TYPE_80211a
Radio Subband................................ RADIO_SUBBAND_ALL
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 3
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:1d:71:09:8f:90
Operation Rate Set
6000 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
9000 Kilo Bits........................... SUPPORTED
12000 Kilo Bits.......................... MANDATORY
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... MANDATORY
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 36
Number Of Channels ........................ 20
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
--More or (q)uit current module or <ctrl-z> to abort
Tx Power
Num Of Supported Power Levels ............. 7
Tx Power Level 1 .......................... 15 dBm
Tx Power Level 2 .......................... 14 dBm
Tx Power Level 3 .......................... 11 dBm
Tx Power Level 4 .......................... 8 dBm
Tx Power Level 5 .......................... 5 dBm
Tx Power Level 6 .......................... 2 dBm
Tx Power Level 7 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 44
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
......................................... 104,108,112,116,132,136,140,
......................................... 149,153,157,161
TI Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
--More or (q)uit current module or <ctrl-z> to abort
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 16 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Press Enter to continue or <ctrl-z> to abort
Cisco AP Identifier.............................. 3
Cisco AP Name.................................... KNOWLOGY_DC02
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:36:c5:c4
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.101
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
--More or (q)uit current module or <ctrl-z> to abort
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
--More or (q)uit current module or <ctrl-z> to abort
AP Serial Number................................. FTX1230T24F
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 22
WLAN 2 :........................................ 21
WLAN 4 :........................................ 25
WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 48 days, 20 h 24 m 41 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:35 2013
Join Taken Time.................................. 0 days, 00 h 10 m 48 s
--More or (q)uit current module or <ctrl-z> to abort
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211b
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 3
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:22:55:a5:0c:30
Operation Rate Set
1000 Kilo Bits........................... MANDATORY
2000 Kilo Bits........................... MANDATORY
5500 Kilo Bits........................... MANDATORY
11000 Kilo Bits.......................... MANDATORY
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
--More or (q)uit current module or <ctrl-z> to abort
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 11
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
--More or (q)uit current module or <ctrl-z> to abort
Current Tx Power Level .................... 1
Phy DSSS parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 1
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
Current CCA Mode .......................... 0
ED Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
Coverage exception level................... 25 %
--More or (q)uit current module or <ctrl-z> to abort
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Cisco AP Identifier.............................. 3
Cisco AP Name.................................... KNOWLOGY_DC02
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:36:c5:c4
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.101
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
--More or (q)uit current module or <ctrl-z> to abort
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
--More or (q)uit current module or <ctrl-z> to abort
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
AP Serial Number................................. FTX1230T24F
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 22
WLAN 2 :........................................ 21
WLAN 4 :........................................ 25
WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
--More or (q)uit current module or <ctrl-z> to abort
AP Up Time....................................... 48 days, 20 h 24 m 41 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:35 2013
Join Taken Time.................................. 0 days, 00 h 10 m 48 s
Attributes for Slot 1
Radio Type................................... RADIO_TYPE_80211a
Radio Subband................................ RADIO_SUBBAND_ALL
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 3
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:22:55:a5:0c:30
Operation Rate Set
6000 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
9000 Kilo Bits........................... SUPPORTED
12000 Kilo Bits.......................... MANDATORY
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... MANDATORY
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 36
Number Of Channels ........................ 20
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
--More or (q)uit current module or <ctrl-z> to abort
Tx Power
Num Of Supported Power Levels ............. 7
Tx Power Level 1 .......................... 15 dBm
Tx Power Level 2 .......................... 14 dBm
Tx Power Level 3 .......................... 11 dBm
Tx Power Level 4 .......................... 8 dBm
Tx Power Level 5 .......................... 5 dBm
Tx Power Level 6 .......................... 2 dBm
Tx Power Level 7 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 36
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
......................................... 104,108,112,116,132,136,140,
......................................... 149,153,157,161
TI Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
--More or (q)uit current module or <ctrl-z> to abort
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 16 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Press Enter to continue or <ctrl-z> to abort
Cisco AP Identifier.............................. 5
Cisco AP Name.................................... KN1252_AP01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:ef:06:50
IP Address Configuration......................... DHCP
IP Address....................................... 10.125.18.101
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 10.125.18.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Enabled
Ssh State........................................ Disabled
Cisco AP Location................................ Knowlogy Conference Rooms Side
Cisco AP Group Name.............................. OGR
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or <ctrl-z> to abort
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.4.10.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. PoE/Medium Power (15.4 W)
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1252AG-A-K9
AP Image......................................... C1250-K9W8-M
IOS Version...................................... 12.4(23c)JA5
--More or (q)uit current module or <ctrl-z> to abort
Reset Button..................................... Enabled
AP Serial Number................................. FTX122990L5
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 118
WLAN 1 :........................................ 111
WLAN 2 :........................................ 111
WLAN 4 :........................................ 112
WLAN 6 :........................................ 112
WLAN 7 :........................................ 111
WLAN 9 :........................................ 112
WLAN 8 :........................................ 112
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 26 days, 00 h 24 m 39 s
--More or (q)uit current module or <ctrl-z> to abort
AP LWAPP Up Time................................. 26 days, 00 h 23 m 48 s
Join Date and Time............................... Wed Oct 9 10:59:07 2013
Join Taken Time.................................. 0 days, 00 h 00 m 50 s
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211n-2.4
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 7
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:22:55:df:a5:90
Operation Rate Set
1000 Kilo Bits........................... MANDATORY
2000 Kilo Bits........................... MANDATORY
5500 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
11000 Kilo Bits.......................... MANDATORY
MCS Set
MCS 0.................................... SUPPORTED
MCS 1.................................... SUPPORTED
MCS 2.................................... SUPPORTED
MCS 3.................................... SUPPORTED
MCS 4.................................... SUPPORTED
MCS 5.................................... SUPPORTED
MCS 6.................................... SUPPORTED
MCS 7.................................... SUPPORTED
MCS 8.................................... SUPPORTED
MCS 9.................................... SUPPORTED
MCS 10................................... SUPPORTED
MCS 11................................... SUPPORTED
MCS 12................................... SUPPORTED
MCS 13................................... SUPPORTED
MCS 14................................... SUPPORTED
MCS 15................................... SUPPORTED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
--More or (q)uit current module or <ctrl-z> to abort
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 11
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 ..........Well you need to understand the behavior of h-reap or what it's called now, FlexConnect. In this mode, the clients are still remembers on the WLC until the session timer/idle timer expires. So switching between SSID's in h-reap will not be the same when switching when the AP's are in local mode.
Take a look at the client when connected in FlexConnect in the WLC GUI monitor tab. Thus will show you what ssid and vlan the client is on. Now switch to a different ssid and compare this. It's probably the same because the client has not timed out. Now go back to the other ssid and look again. Now on the WLC, remove or delete the client and then switch to the other ssid at the same time. Or switch SSID's and then remove the client. The client will join the new ssid and in the monitor tab, you should see the info.
There is no need to have clients have multiple SSID's unless your testing. Devices should only have one ssid profile configured to eliminate any connectivity issues from the device wanting to switch SSID's.
Sent from Cisco Technical Support iPhone App -
How to create reports servers with the same name in two nodes in Reports
Greetings
We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
Thanks
Ramiro Ortiz.Hello.
I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
osfind: Found 2 agents at port 14000
HOST: SNMVBOGOAS10.sena.red
HOST: SNMVBOGOAS09.sena.red
osfind: There are no OADs running on in your domain.
osfind: There are no Object Implementations registered with OADs.
osfind: Following are the list of Implementations started manually.
HOST: SNMVBOGOAS10.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep2
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep2
HOST: SNMVBOGOAS09.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep
Any Ideas? -
Crawl Error GetVirtualServerPolicyInternal - An item with the same key has already been added
Hi,
I did an index reset and now I can't start any crawl. It's complaining "An item with the same key has already been added". Exception seems to from Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicyInternal.
What should I check? Thanks.
The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: 9e69ff9c-f925-50bf-5110-d1b0e74c77bc; SearchID = 522CB441-0028-4E7D-BED4-4230D7ADD14B
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dm1k Medium Exception Type: System.ArgumentException *** Message : An item with the same key has already been added. *** StackTrace: at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean
add) at Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicyInternal(String strStsUrl, WssVersions serverVersion, sPolicyUser[]& vUsers, sPolicyUser& anonymousUser, String&
strVersion, String[]& vServerWFEs, Boolean& fIsHostHeader, Boolean& fIsAllUsersNT, Boolean& fIncludeSiteIdInCompactURL) at Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicy(String
strStsUrl, sPolicyUser[]& vUsers, sPolicyUser& anonymousUser, String& strVersion, String[]& vServerWFEs, Boolean& fIsHostHeader, Boolean... 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93* mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dm1k Medium ...& fIsAllUsersNT, Boolean& fIncludeSiteIdInCompactURL) 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
fsa0 Monitorable GetVirtualServerPolicy fail. error 2147755542, strStsUrl
http://serverurl 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvt6 High SetSTSErrorInfo ErrorMessage = Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7 hr = 80042616 [sts3util.cxx:6988]
search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvi3 High Couldn't retrieve server
http://serverurl policy, hr = 80042616 [sts3util.cxx:1865] search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvu0 High STS3::StoreCachedError: Object initialization failed. Message: "Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7"
HR: 80042616 [sts3util.cxx:7083] search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvg4 High Server serverurl security initialization failed, hr = 80042616 error Message Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7
[sts3util.cxx:1591] search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dv5x High CSTS3Accessor::InitServer: Initialize STS Helper failed. Return error to caller, hr=80042616 [sts3acc.cxx:1932] search\native\gather\protocols\sts3\sts3acc.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dv3t High CSTS3Accessor::InitURLType fails, Url
http://serverurl, hr=80042616 [sts3acc.cxx:288] search\native\gather\protocols\sts3\sts3acc.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvb1 Medium CSTS3Accessor::Init fails, Url
http://serverurl, hr=80042616 [sts3handler.cxx:337] search\native\gather\protocols\sts3\sts3handler.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvb2 Medium CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80042616 [sts3handler.cxx:355] search\native\gather\protocols\sts3\sts3handler.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Crawler:FilterDaemon
e4ye High FLTRDMN: URL
http://serverurl Errorinfo is "Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7" [fltrsink.cxx:566] search\native\mssdmn\fltrsink.cxx
04/22/2015 19:37:10.93 mssearch.exe (0x1118) 0x0628 SharePoint Server Search Crawler:Gatherer Plugin
cd11 Warning The start address http://serverurl cannot be crawled. Context: Application 'Enterprise_Search_Service_Application', Catalog 'Portal_Content' Details: The SharePoint item being
crawled returned an error when requesting data from the web service. (0x80042616)
04/22/2015 19:37:10.99 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:10.99 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:10.99 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.03 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. 58d54385-497b-466d-9f02-aeba664bc1b6
04/22/2015 19:37:11.03 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. 58d54385-497b-466d-9f02-aeba664bc1b6
04/22/2015 19:37:11.03 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. 58d54385-497b-466d-9f02-aeba664bc1b6Hi,
For troubleshooting your issue, please take steps as below:
1. Try to crawl your content source using farm admin account.
2.
Disable loopback check .
3.Add reference SPS3s://WEB into your content source start addresses.
For more information, please refer to these blogs:
http://sharepoint.stackexchange.com/questions/5215/crawling-fails-with-404-error-message-but-the-iis-log-tell-a-different-story
http://www.cleverworkarounds.com/2011/07/22/troubleshooting-sharepoint-people-search-101/
http://blogs.msdn.com/b/biyengar/archive/2009/10/27/psconfig-failure-with-error-an-item-with-the-same-key-has-already-been-added.aspx
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
I have an iPhone 5s running iOS8 and an iPad, up to date. I have recently changed my mail server but not my email address. My "old" mail account is an Exchange account and I have also set up a "new" Exchange account with the same address but with the new mail server details. When I receive outside, third party emails they are routed correctly to the "new" Exchange account but when I bcc myself or receive other emails from any account with my domain name the emails are routed to my "old" Exchange account. I have changed the default account settings to the "new" Exchange account. Also, if I send myself an email from my laptop, through the new mail service provider, it is routed correctly on my laptop but incorrectly on my iPhone and iPad. It appears as though the Apple products have cached my email address and routing and won't look to pick up the new mail server details. I don't see anything in the mail account settings or contacts that allows me to refresh or clear the cache. The result is I now have mail in 2 accounts. If I can get the misdirected mail from the odl account to the new one I will then make the old account inactive. Anyone have any ideas on this one?
Thanks in advance for your time and ideas,
DAACan you set up a rule in your old account to forward mail to your new account and then delete it from the old account?
(1012) -
I have an iMac, an iPhone, and a MacBook Pro. My full iTunes library is on the iMac and iPhone, but only a handful of songs are on my MacBook. They are all associated with the same Apple ID. When I try to sync, I get a warning message stating that I will lose songs on my phone which aren't on the laptop. How transfer my music from my phone to the laptop?
Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Itunes match with two different libraries on two different computers with the same apple ID? How?
I have a work PC that I synch with my itunes library and it works totally fine. I also have a macbook at home with a different library on it. Both compuers share the same apple id. will itunes match synch all the devices with the same library? If so do I only need one itunes match purchase or do I need one for each computer? The apple help desk (phone support) and apple store I recently visited were unable to provide me with answers to my questions.
Just create a new account. On one iPod go to Settings>iTunes and App stores and sing out and sign in with other account. Same for Settings>iCloud and Settings Messages. Also go to Settings>Face time and add the new iD email addrss as the Caling email address and delete the other one.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account. -
I have a IPhone 5 and Iphone 5s, each phone is activited with a different service provider. Both are set up with the same account ID and running IOS 8.0.2. When the phones are connected to the same Wifi at home, both phones will ring when someone call in to one of the phone. Hence you do not know exactly which line the caller called. If you answered using the wrong phone, then anyone calling the other number will not get through. Anyway to solve this problem?
Hey David Koh TP,
Thanks for the question. It sounds like your devices are set up to use continuity together. Specifically, it sounds like you are signed into the same Apple ID in FaceTime, and have iPhone Cellular Calls enabled. To resolve your issue, simply disable this setting:
Connect your iPhone, iPad, and iPod touch using Continuity
http://support.apple.com/kb/HT6337
Turn off iPhone cellular calls
To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.
Thanks,
Matt M.
Maybe you are looking for
-
I found this (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could on
-
Trigger with sequence question
figured it out Edited by: Jay on Apr 24, 2012 9:49 AM
-
RMAN-01009: syntax error: found "cancel"
Hi! I am playing with rman on my test machine and I encountered error that I can't resolve. I've tried to restore/recover datafiles executing this commands: $ sqlplus "/as sysdba" SQL>startup mount RMAN> restore database (everything went well) RMAN>
-
Flickr Export does not manage color porfiles
You can look at these two pictures. Identical photos, one was exported with the "flickr" button and the other by export -> version -> manual upload. Anyone else experiencing this? http://www.flickr.com/photos/46081098@N08/sets/72157625974089915/with/
-
LWAP not joining controller, but has downloaded software
Hi All, I have four APs that when I powered on individually, they went into the downloading state and rebooted, now have the mac address APxxxx.xxxx.xxxx.cisco.com and can see this on my switch and cdp is working, but has not joined the controller? I