S.M.A.R.T. status depends on program?

Hi,
The last couple of days I've had problems with my Macbook Pro (OS X 10.6), which seems to be a harddisk (Toshiba MK3255GSXF Media) related problem.
When I run Disk Utility (Programs -> Utilities -> Disk Utility) it says that there is a hardware issue and that "S.M.A.R.T.-status: failing" - I've read numerous topics online, and I have now tried both Drive Genius and Disk Warrior.
Now Drive Genius says: "S.M.A.R.T verified" which I thought was a good thing - but Disk Utility still says that there is a problem with the S.M.A.R.T status.
So now I'm kind of confused - which program is lying and what can I do about it?
*Edit* After checking again, Disk Warrior now says:
"This hard drive's built-in S.M.A.R.T. diagnostics indicate a failure of pending failure that could result in loss of data" - However, I'm not aware of if it's just relying on information from Disk Utility or some information it get itself - it's still confusing having different programs saying different thing on the same topic!

EDS513 wrote:
Any suggestions?
(1) I have trouble following you. Try to explain your problem in a more orderly fashion.
(2) Are you sure your problem is the same as the OP's, in a 2-months-old thread?
(3) If you're talking about the SMART status of an external drive, you need to be aware that that feature is not supported by Mac OS X.

Similar Messages

  • How do I restore my Admin status for a program in Applications using 10.6.8

    How do I restore my Admin status for a program in Applications using 10.6.8?

    Is this the file that does not have the desired priveleges? I think that's correct. If so, then open Terminal in the Utilitie folder. At the prompt enter:
    sudo chown -Rf root:admin [dragged file goes here]
    Leave a space after "root:admin" and drag the file you need to change into the Terminal window. Press RETURN. You will be asked to enter your admin password. It will not be echoed to the screen so type carefully. Press RETURN again.
    This will change the priveleges of the file to the default for the Applications folder.

  • What is the use of GUI status in Dialog programming

    what is the use of GUI status in Dialog programming,, how can it be used there,, as screen are alredy defined..

    Hi,
    The use of GUI Status is that when we have to change some thing in Menu Bar, Toolbar and Function Keys. Say For Example we have to create any Custom Button in the application toolbar etc.
    It can be used in Dialog Programming via defining the Status in the PBO module of the screen.
    eq. created a screen 9000
              on clicking it->
                                   PROCESS BEFORE OUTPUT.
                                             MODULE status_9000.
    On double clicking on this "Module status_9000" - you can write "SET PF-STATUS 'STATUS_9000'".
    Now u can create GUI staus with name "'STATUS_9000'".
    Let me know in case you have any further doubts.
    Thanks

  • Adapter status determination by program

    Dear all,
    Is there any possibility to determine an adapter status by a program?
    I mean, if there is any API, or BAPI, or RFC, or tables, whatever, to read into an ABAP program the adapter status - specifically the informations which are displayed on the corresponding Runtime Workbench page (active/inactive/stopped, perhaps the status of last processed messages).
    The ABAP cache holds all the adapters (definitions), but no dynamic status, so it's useless. The message table does not contain any information about the adapter, so it's useless too.
    The ideal would be to retrieve such data into an ABAP program, but any other help would also be useful.

    Hi
    These table contains XI information, might help u
    Interesting ABAP tables in XI – Part I

  • GUI status of std. program

    Hi,
       Can somebody tell me how to get the GUI statuses i.e. All the Function Codes used mentoined in a GUI status of standard program.
    I have checked the program SAPMSEUK & Function Module RS_CUA_INTERNAL_FETCH. But its not giving the GUI_STATUS till the bottom Function Codes level.
    Please suggest some solution...
    Regards,
    Rushikesh

    Hi,
    if you don't want them programatically, call the transaction in question and click on system->status. Double click on the field gui status. This will lead you to the definition of all function codes (ok codes) of the screen.
    If you want programatically, try using the function module.....
    data: irsmpe_funl type table of rsmpe_funl with header line.
    call function 'RS_CUA_GET_FUNCTIONS'
      exporting
      LANGUAGE                = ' '
        program                 = <program_name>
    IMPORTING
      MASTER_LANGUAGE         =
      tables
        function_list           = irsmpe_funl
    EXCEPTIONS
      MENU_NOT_FOUND          = 1
      PROGRAM_NOT_FOUND       = 2
      OTHERS                  = 3
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    regrads
    navjot
    reward if helpfull

  • Status ARCHIVE_CONTENT in program SAPLOCS_UI is missing

    Hi, SAP expert,
         I just install minisap 4.6D recently. I try to play around to upgrade the support package via transaction code SPAM.
         When I upload the support package (e.g.: SAPKA46D01.CAR) from the frontend (local PC), it shown a dialog screen for this package info. But at bottom (main screen) it prompt a message 'Status ARCHIVE_CONTENT in program SAPLOCS_UI is missing'.
         May I know, is it a miniSAP bug or there is any patch to fix it ?
         Kindly advise. 
    Thanks and Best Regards
    Wong Hock Lin

    HI Sunny,
    you are correct. Basically my issue was with the Tablespace PSAPSR3701, it was 100% full. So support package stuck. After adding space to the tablespace,  I follow the below process. 
    ================================
    If your problem is not solved still, then you can do the following, however please verify with SAP support first:
    1. Take a full offline backup of you solution manager server. So that you can revert back to the same point in case. Then start SAP system, and ensure you have tp and R3trans latest.
    2.Pls make sure that you have NOT made any changes to import
    buffer, use the command to verify
    tp showbuffer <SID> tag=spam pf=<...transport profile>
    3. check at OS level to see if there are any tp or R3trans still
    running; if yes stop them.
    4. The TRBAT and TRJOB tables should be empty, if there are any
    entries take a backup of the table, and delete the entry, manually if
    neccesary at database level
    4. Pls issue the following tp command to manually import SP
    tp R3I SAPKB70012 <SID> pf=/usr/sap/trans/bin/<Your TP_DOMAIN_SID.PFL>
    -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8
    -Dsourcesystems= tag=SPAM
    The return code for this tp call must be 0 or 4.
    it will ask for modification adjusment then GOTO --> STATUS --> QUEUE --> Confirm Queue to get out  from the error (spam_confirm_patch wrong_status:R)
    It might ask for SPAU_RUN. continue if you have done before.
    then click confirm under the support package tab.
    ===========================================================

  • How to copy pf-status from one program to another program

    Hi Gurus,
    Can any one tell me the procedure how to  copy pf-status of one program to another program .if i want to copy pf-status which is in production server to development server how can i do this.pls help me out.
    Regards.

    Hi,
    GO TO  SE41,
    Select Status,
    In from u can give  ur old pgm and staus name
    In To u can ur new one .
    Save and activate.
    Regards,
    S.nehru.

  • Hw to find out the status of the program...? like active / inactive?

    Hi kindly let me know how to find out the status for the programs (like active / inactive).
    I have 100’s of zprograms; I want to know at a time which are all active and which are all inactive.
    I heard some table is there, but don’t know exactly, let me know if you have any idea…
    Akshitha.

    Hi akshitha,
    1. Active and Inactive status is stored in table REPOSRC.
    2.  Just goto that table in SE11/SE16,
         and enter (copy/paste) the list of your 100 programs.
    3. <b>In that there is a field R3STATE
       Where A= Active
                 I = Inactive</b>
    From there u can filter as per ur requirement.
    regards,
    amit m.

  • Approval preview showing diferent status depending on transaction used.

    Dear Gurus,
    -SRM4.0
    -N step approval BADI implemented ( up to three levels)
    We are facing next issue:
    To reproduce the error: Create a SC that requires three levels of approving. Next approver level 1 completes the SC. SC goes to approveru2019s level 2 inbox. Approver level 2 is out of office and outlook mails back automatically as u201C I am out of officeu201D.
    -By cheking swi6 SC shows the correct status: approved by approver level 1 and awaiting approval of the other 2 ones.
    -By checking SC via u201C check status>Approval previewu201D:  SC shows the correct status: approved by approver level 1 and awaiting approval of the other 2 ones.
    -By checking SC via u201C Monitoring SC> Approval preview: SC shows the SC as approved by approver level 2.
    Any ideas about why approval preview differs depending on the tx used?
    Thanks and Regards,
    Abraham

    Issue due to ITS. Using ITS external instead of Internal one.

  • Set a User Status depending on System Status

    Hi,
    I would like to activate a user status of the sales document depending on the Rejection Status.
    Do you know how this could be done?
    Thanks
    Edited by: mforman on Feb 25, 2011 11:54 AM

    I've created a Status Profile with the Object Types: Sales Order header and Sales Order item.
    But I don't know which Business Transaction I should allow/set in order to get this status set once a rejection reason is assigned to an item.
    Any suggestion? Or workaround?
    Thanks

  • Status-dependent Acitivies: C_DRAW_TCS vs C_DRAW_TCD

    Hello,
    I would like to achive the following system behaviour in transaction CV02N:
    We are using a document status. Depending on the status it should be possible for the user to display the originals or not. From the SAP help files I thought that authorization object C_DRAW_TCS allows me to do that. If fact, the system always requests a C_DRAW_TCD (status-independent) authorization.
    Could anyone explain to me how to use C_DRAW_TCS, please?
    Thanks a lot
    Marcus.

    Hi Marcus
    Suppose there are three status Create(CR) ,checked (CD) , Released (RE).for Document Type DRW
    Consider user US1, US2, US3.
    If you want US1 to  create document in CR status Assign him C_DRAW_TCS with Activity 01 Create
    and status CR.So he will be able to log in CR status and can only create DIR for Dco.Type DRW
    So US1 Creates Document.
    US2 checks the document but he will not allowed to change Document So Authorization object C_DRAW_TCS with Activity 03 Display and status CR.
    US3 will Release the DIR So he will have Display as well as Change right for DWD and Authorization Object will be C_DRAW_TCS with Activity 02 & 03 Create and status CD.He can release the document.
    The status value tell that he can log into that status only.Please get back if any more query.
    With Regards
    Mangesh Pande

  • Change the Status depending on the value selected in Sales stage

    I want to change the status in opportunity, depending upon what is entered in sales stage.
    I tried to find an appropriate BADI for the same purpose, but couldn't figure out any.
    I was thinking of changing the method do_prepare_output and including the code to get the value of sales stage and set the status. Is this feasible?

    Alternatively, you can enhance the SET method of the sales status and add the logic for status update as well.
    Regards, Kathirvel

  • How to control field status depending on input parameter to screen?

    Hi,
    I'm sure I met the solution somewhere, but can't find it. Here is the situation:
    I have Screen sequence - my scr.100 calls 110 (detailed screen). I would like to achieve creation or modification of a detailed item depending on an input parameter (ok_code), which I know how, but whould also like to set some fields for input/output or for output only depending on the same parameter.
    Could anyone help me with piece of code or describing what should I do to achieve this (in an example of 1 field)?
    Possible variant is to create another screen - for modify mode, which is not so elegant for me, and yes, I know how to do that.
    Many thanks in advance.
    Ivaylo Mutafchiev

    Try this.....
    LOOP at Screen.
    if screen-name = 'YOURFIELD'.
    screen-input = '0'.
    modify screen.
    endif.
    endloop.
    Regards,
    Rich Heilman

  • Changing system status depending on user status

    Hello All,
    What I need to do is, when the user sets the user status to, let's say, "Finished", I have to detect it and change the system status to "Concluded".
    Does anybody have any idea about how could I manage this situation?
    Thanks in advance.

    If you set the system status from within the transaction online, the solution by Richard is indeed correct. However, if you change a user stauts using an action, you have to perform two actions: set the user status (FM CRM_STATUS_CHANGE_EXTERN) and set the system status (FM CRM_STATUS_CHANGE_INTERN) as well.
    In this case, you also must check if you have to set this status only on header level, or also on item level, but a good developer can help you out on this one.
    Hope this helps you.

  • Monitoring the email send status (SOST) through program

    Hi All,
    I have send the smartform output to email addresses as attachment. But I am not able to monitor the status of those emails whether the mail address is correct or not. or whether the email have gone or not.
    How to check that?
    Is there any way so that I can access the data of SOST transaction
    Thanks in advance.
    Rgds,
    Madhuri

    Hi Madhuri,
    Please check the code below:
    *----- List of Users
      DATA: lt_user TYPE STANDARD TABLE OF str_agrs,
            lt_user_wa LIKE LINE OF lt_user.
    *----- For object data
      DATA: lt_obj_data    TYPE STANDARD TABLE OF sodocchgi1,
            lt_obj_data_wa LIKE LINE OF           lt_obj_data.
    *----- For receiver
      DATA: lt_rec TYPE STANDARD TABLE OF somlreci1,
            lt_wa  LIKE LINE OF           lt_rec.
    *----- For the text
      DATA:  lt_text_itab TYPE TABLE OF solisti1,
             lt_text_wa   LIKE LINE OF lt_text_itab.
    *----- Data Declaration for Email Address Get
      DATA: lv_email TYPE string,
            lv_subrc TYPE sy-subrc,
            lt_error TYPE STANDARD TABLE OF rpbenerr.
    *---- Get the users list
    CALL FUNCTION 'ESS_USERS_OF_ROLE_GET'
        EXPORTING
          role       = 'SAP_ALL'  "{color:green}Role can be anything depending on your requirement{color}
        TABLES
          role_users = lt_user.
    *----- Pack data inside the table
      READ TABLE lt_user INTO lt_user_wa INDEX sy-tabix.
    *----- Get the address using User ID
      CALL FUNCTION 'HR_FBN_GET_USER_EMAIL_ADDRESS'
        EXPORTING
          user_id       = lt_user_wa-uname
          reaction      = 'S'
        IMPORTING
          email_address = lv_email
          subrc         = lv_subrc
        TABLES
          error_table   = lt_error.
    *------ Receiver Details
      lt_wa-receiver = lv_email.
      lt_wa-rec_type = 'U'.
      lt_wa-com_type = 'SOTR'.
      APPEND lt_wa TO lt_rec.
      CLEAR  lt_wa.
    *------ Call method to send the mail
      CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
        EXPORTING
          document_data              = lt_obj_data_wa
          document_type              = 'RAW'
          commit_work                = 'X'
        TABLES
          object_content             = lt_text_itab
          receivers                  = lt_rec
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          OTHERS                     = 8.
      IF sy-subrc <> 0.
        <log>
    ENDIF.
    Try this,
    Regards,
    -Syed.
    Edited by: wahid hussain syed on May 14, 2009 8:55 AM

Maybe you are looking for

  • Java Support Pack Stack - what about additional patches?

    Hi Guys, I have applied Java SP stacks many times before so this is not a technical question as such. We download the entire SP Stack and apply it via JSPM. But this only updates the system to that stack with patch level 0. For instance, if I apply S

  • Some messages are not reaching my webmail INBOX

    I use an email forwarder so that my email address is [email protected] (It's not really xyzzy but you get the idea.) They redirect messages to my actual Verizon email address. In the past week, some emails sent to xyzzy are not getting to VZ. POBOX s

  • Winzip and email won;t work. It needs MAPI. ????

    Winzip has the option to zip a file or folder and email it by right clicking on the file or forder and chosing the procedure. However, when I do it gives the error message "MAPI not available" How do I get MAPI?

  • Can't remove Click to Call - causes issues in HTML...

    The new problem I'm having with Click to Call it is that if I'm working with an HTML editor (such as TinyMCE or a similar WYSIWYG editor) it adds the little click to call icon. In the source this equates to a ridiculously long string. You really need

  • Language for returned data

    Hi all; kindly I need to change the language for returned data where as I have oracle 10g on AIX server because I have a problem when I get arabic data it returns as "??????????" so please help me.