SA PASSWORD from SQL Server Reports in TMG Threat Forefront Gateway
Dear friends.
I have a question and the technical support did not resolve it.
I need to know which is the SA password when you install the Forefront TMG because i need to made querys into the SQL Server management studio installed in the server.
Thankls
Hi,
AFAIK the SA password is controlled by TMG and the SQL authentication mode for MSFW is Windows authentication and for ISARS Mixed authentication, so you should be able to open the ISARS database with your Windows credentials that you use to administrate
Forefront TMG.
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3570
Similar Messages
-
Integrating Reports from SQL Server Reporting Services
Dear Experts,
I am given the URL to a report from SQL Server Reporting Services. The URL looks like
[http://<report_server_host>/ReportServer/Pages/ReportViewer.aspx?/<category>/<report>&<list_of_parameter_value_pairs>]
When this URL is executed, the user will be prompted for user name and password.
And I am given the following requirements:
- Integrate the report into SAP NetWeaver Portal
- The report has to be passed parameters with values generated at runtime and which must be hidden (because it is sensitive data)
Initially, I have been working on two options:
1. using Application Integrator (portal application: com.sap.portal.appintegrator.sap, portal component: Generic)
2. using URL iView
With the Application Integrator, however, I got the following error:
The operation you are attempting on item "/" is not allowed for this item type. (rsWrongItemType)
I cannot find the solution to this. It looks like the URL which contain "/" after "?" is not appropriate for the Application Integrator.
So I turn my focus away from the Application Integrator, but to using the URL iView instead. And in order to hide the parameters passed, I make the following settings in the URL iView:
Request Method = POST
Fetch Mode = Server-Side
But then I got the following error:
Failed to fetch the content. The response status was 401.
Message:
(I have defined an HTTP system and used it in the URL iView.)
Does anyone know how to fix the errors (either with the Application Integrator or the URL iView)?
Your answers will be much appreciated!
Regards
Sakprasat SumHi
Was a solution for this found?
I am trying to achieve the same thing, create an iView that links to an existing SQL Reporting Services report.
Cheers,
Andrew -
Migration from SQL Server Reporting Services to Oracle Reports 10g
Hi,
I have few reports which have been created using the Microsoft Sql Server Reporting Services.Now i want to create similar reports using Oracle Reports 10g.
Will i need to start from scratch the creation or is there migration tool that would reduce the efforts for the same.
Thanks in advance.Note there's a lot of useful info on sqldev's homepage (Learn More tab): migration docs and examples.
Regards,
K. -
Connecting to Amazon Redshift from SQL Server Reporting Services
Hey all,
Just a general question for now as the company I work for is looking to migrate our current data warehouse from SQL Server 2008R2 to Amazon Redshift. Currently all of our reports on our intranet are SQL Server Reporting Services reports and
I have been tasked with finding out whether or not we can connect SSRS to Amazon Redshift. I see that Amazon Redshift is a SQL data warehouse and uses industry standard ODBC and JDBC connections and PostgreSQL drivers so many popular software vendors
are certifying Amazon Redshift with their offerings to enable tools to still access RedShift.
If SSRS can connect to Amazon Redshift, can you also advise me on how this can be done so I can begin playing around with it.
CheersHi there,
You might want to try the Windows AMIs.
http://aws.amazon.com/windows/amis/
For local access, you'll probably need to install 32-bit & 64 bit Postgres drivers on the server & developer machines.
http://stackoverflow.com/questions/17323590/redshift-with-ssis-ssdt
http://michaeljswart.com/2013/03/checking-out-amazon-redshift/
Then you'll need to configure connection strings in your data source and test.
http://docs.aws.amazon.com/redshift/latest/mgmt/configuring-connections.html
cheers,
Andrew
Andrew Sears, T4G Limited http://www.performancepointing.com -
Encrypt Excel Export from SQL Server Reporting Services prior to attaching to e-mail
Does SSRS 2012 have a secure e-mail Delivery Extension that would allow the Excel document to be encrypted?
Or is there sample code?
Or is the best approach to consider a Microsoft Partner product such as Database Potential, Inc.'s "Secure Delivery Pack for SQL Server Reporting Services"?
http://www.databasepotential.com/product-p/sdp.htm
Thanks in advance for any thoughts or feedback regarding this topic.
BoydHi Boyd,
Currently, it’s not supported a delivery extension that encrypts documents before sending them in Reporting Services. If you have the SQL Server Integration Services (SSIS) environment, you can use the following workaround:
1. Using SSIS Script Task to encrypt the report before exporting it to the Excel file.
2. Add a Send Mail Task to send the Excel files to the recipients.
For the details, please refer to the document below:
http://microsoft-ssis.blogspot.in/2011/10/encrypt-files-in-ssis.html
In addition, we can try to use .NET API approach. In this scenario, we need capture the Excel file using the WQL Query of FileWatcher, and then encrypt the file, finally email the Excel File.
For the details, please refer to the blog as shown below:
http://microsoft-ssis.blogspot.in/2010/12/continuously-watching-files-with-wmi.html
If you need more assistance, please feel free to contact me.
Regards,
Heidi Duan
If you have any feedback on our support, please click
here.
Heidi Duan
TechNet Community Support -
Decrypt the hashed password in SQL Server 2008
Hello all,
I have used HASHBYTES to decrypt the password of the user using SHA1, so now there is a requirement to decypt back the password to its original form,
for eg
Pass word is 'Jhon' so after applying HASHBYTES('SHA1','Jhon') it gices the output as "0xB13B42158655F36814F3C4541C6457F7CAD0F719"
Now i want back to get Jhon from the encypted value.
Please suggest an idea to do so.
Thanks for advance.
Pankaj Kumar Yadav-To expand on what Dan says above, one can use pwdencrypt/pwdcompare from SQL but in a different context (http://stackoverflow.com/questions/173329/how-to-decrypt-a-password-from-sql-server).
The context would be more like the one that is used to determine whether your user passes a CORRECT password. In this case, the hash value saved in the database must be the same as the hash value of the password being passed in. In this
manner, while you can't decrypt, you can determine whether the user knows the password or not without storing the password. Not the best way to enable a password, but a workaround for sure. Similar to Dan's method above but may provide a bit more
detail as to the why's and wherefore's using the examples listed there.
R, J -
Hello,
We have configured SharePoint site and SSRS for a team project.
Foll. is the SharePoint site for the team project. When we click on the REPORTS link, it redirects us to the SQL Server Reporting Services website.
My question is: How can I show or publish the reports from SQL Server Reporting Services into SharePoint so that I can view the reports on SharePoint dashboard rather than having to go to the SSRS URL?Hi Nachiket,
If you configure Reporting service for your TFS, then you can view the reports in report manger site when you click click report on Team Explorer. And SharePoint is a collaboration website product that offers deep integration with Office products like Word,
Outlook, and Excel. You can save your team project related files in your SharePoint site. Check this
page for more details.
If you want to view reports that generated by reporting service on your SharePoint site, you might need to save the report in Excel and upload it to SharePoint site.
Best regards, -
Hi team,
I got below error message in SQL Server 2005 reporting service.
''The report server is not responding. Verify that report server is running and can be accessed from this computer'
also in reports, i am getting below error:
"The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
Get Online Help
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Get Online Help "
Please find below log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
<SystemName>MFLDDDBS04</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration
file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
Win32 error:13;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
--- End of inner exception stack trace ---Hi Vivek,
In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
we can know that it relates to the domain account for report server connection.
To fix this issue, we can refer to the following steps:
Log in to SQL Server Database Engine in SQL Server Management Studio.
Under Security folder, give sufficient permissions for your domain account.
Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
Restart the Report Server services.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
"URl has already been reserved".
Reporting services for port 80 and 443 works fine both for reports and reportingserver on SQL server 2008 R2. But when I try to upgrade from SQL server 2008 R2 to 2012 this error pops up. How to make sure before upgrading regarding reporting services that
URL reserves and SSL are fine or how to fix reporting services are upgrade like repair install.
ThanksHi yashmitl,
In your case, please running the following command to check the current URL reservations on http.sys.
netsh http show urlacl
Then, please delete the URL reservation by executing the following command try to resolve the issue.
netsh http delete urlacl <url>
There is a similar issue, you can refer to it.
http://social.technet.microsoft.com/Forums/en-US/d5204dd3-e26d-4592-8ef0-a94005fc46a5/the-url-has-already-been-reserved?forum=sqlreportingservices
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
Calling/starting a report from Sql Server
Hello.
I have to get a storage movement starting from a Sql Server Platform.
I found out the function BAPI_GOODSMVT_CREATE which, getting the main data from an internal
table, could create a movement in MSEG/MKPF (I suppose, I haven’t used it yet).
But if I create a report using BAPI_GOODSMVT_CREATE which gets the data from an internal table
(filled by a Sql Server table), how can I tell to Sap to execute it?
Is it the only way to schedule this report in SAP every (i.e.) 5 minutes reading if there are
data in Sql Server?
Isn’t there a “trigger” to start a report in SAP from Sql Server/Windows?Hello,
It depends on what method you use to read data i.e. Data Context class, Entity Framework for SQL-Server we can get data directly from the database easily.
The following has two very simply examples using data context classes and the same came be done with Entity Framework which has an even more powerful version of data context implementation under 6 and above
Dim db As New DataClasses1DataContext
Dim theCustomer As Customer = db.Customers.Where(Function(c) c.CustomerID = 999).FirstOrDefault
If theCustomer IsNot Nothing Then
' use theCustomer which contains all columns
Else
' do not use, customer not located
End If
Dim theCustomer1 As Customer =
From c In db.Customers
Where c.CustomerID = 999
Select New Customer With
.CompanyName = c.CompanyName,
.ContactName = c.ContactName,
.Orders = c.Orders
).FirstOrDefault
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. -
Verify that SQL Server Reporting Services is installed properly and that it is running.
I am trying to install DPM 2010 on Windows 2008 R2. Running through installation and the server that I'm installing DPM to will also host the SQL instance and Reporting instance. Pretty much choosing all the defaults.
Installation gets to reporting portion and fails. It says that I need to verify that Reporting Services is running. The exact error is:
Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components copied during installation.
For details, click the Error tab.
DPM Setup has not configured Reporting Services to use Secure Sockets Layer. For more information on how to configure the Report Server for Secure Sockets Layer (SSL) connections, see Configuring Report Server for Secure Sockets Layer (http://go.microsoft.com/fwlink/?LinkId=178289)
Report configuration failed.
Verify that SQL Server Reporting Services is installed properly and that it is running.
ID: 812
It is running and working, I can go to the URL and see Reports installed. It grabbed a server certificate which is valid and binds that to 443. I have tried this as well with the certificate removed.
Here is the relative portion of the DPM 2010 log:
[6/25/2010 10:30:01 AM] * Exception : => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException: Exception of
type 'Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException' was thrown.
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException.UnableToConfigureAccount(ErrorCode errorCode)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateUserAccount(String server, String password, Boolean create)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.SetReportingPassword(String password, String server, String instanceName, String dbConnectionString)
*** Mojito error was: PasswordTooShort; 0; None
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
[6/25/2010 10:30:01 AM] * Exception : => Report configuration failed.Verify that SQL Server Reporting Services is installed properly and that it is running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception --->
Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException: exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException:
Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException' was thrown.
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException.UnableToConfigureAccount(ErrorCode errorCode)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateUserAccount(String server, String password, Boolean create)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.SetReportingPassword(String password, String server, String instanceName, String dbConnectionString)
*** Mojito error was: PasswordTooShort; 0; None
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.ConfigureReporting(String reportserverConfigFilePath, Boolean existingDB, Boolean isOemSetup, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
*** Mojito error was: ReportDeploymentFailed; 0; None
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.ConfigureReporting(String reportserverConfigFilePath, Boolean existingDB, Boolean isOemSetup, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.ConfigureReporting(Boolean isRemoteDb)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: ReportDeploymentFailed; 0; None
[6/25/2010 10:30:07 AM] *** Error : Report configuration failed.
Verify that SQL Server Reporting Services is installed properly and that it is running.
ID: 812
[6/25/2010 10:30:07 AM] Information : Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components
copied during installation.
For details, click the Error tab.
DPM Setup has not configured Reporting Services to use Secure Sockets Layer. For more information on how to configure the Report Server for Secure Sockets Layer (SSL) connections, see Configuring Report Server for Secure Sockets Layer (http://go.microsoft.com/fwlink/?LinkId=178289)Hello,
The real problem is the error UnableToConfigureAccount and *** Mojito error was: PasswordTooShort; 0; None
The reason is due to the new password complexity on Windows 2008 which states the following:
Password must meet complexity requirements
This security setting determines whether passwords must meet complexity requirements.
If this policy is enabled, passwords must meet the following minimum requirements:
Not contain the user's account name or parts of the user's full name that exceed two consecutive characters
Be at least six characters in length Contain characters from three of the following four categories:
English uppercase characters (A through Z)
English lowercase characters (a through z)
Base 10 digits (0 through 9)
Non-alphabetic characters (for example, !, $, #, %)
Complexity requirements are enforced when passwords are changed or created.
Default:
Enabled on domain controllers.
Disabled on stand-alone servers.
Note: By default, member computers follow the configuration of their domain controllers.
Please use a more secure password adhering to the above criteria and DPM should install fine.
Regards, Mike J [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights. -
Reg. Migrating data from SQL Server 2000 to Oracle
Hi All,
I need to migrate a same data from SQL Server 2000 to Oracle 9i.In sql server Export option is there, but the problem is some 30 tables have More than one LONG datatype column in a table. That's why oracle not allow to import.
Could you guys find any tool for the same.
Please do the needful.
Thanks & Regards,
Prathaphi dermot,
it's very urgent now. Can you please give any solution for this.
and also i tried the SQL developer tool. But i got an below error,
Error starting at line 2 in command:
CREATE USER dbo_testdatalatest IDENTIFIED BY dbo_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:2 Column:45
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause: An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action: Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 3 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO dbo_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause: An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action: Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 4 in command:
CREATE USER epm_testdatalatest IDENTIFIED BY epm_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:4 Column:45
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause: An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action: Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 5 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO epm_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause: An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action: Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 6 in command:
CREATE USER lportal_testdatalatest IDENTIFIED BY lportal_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:6 Column:49
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause: An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action: Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 7 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO lportal_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause: An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action: Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 8 in command:
connect dbo_testdatalatest/dbo_testdatalatest;
Error report:
Connection Failed
Commit
Regards,
Prathap.R -
I got the error "The request failed with HTTP status 401: Unauthorized." when I call the Reporting Service Web Service.
The code is very simple:
// Initialise the reporting service Web Service
this.RSWebService = new ReportingService2010();
// Pass windos authentication credentials to Web Service
this.RSWebService.Credentials = System.Net.CredentialCache.DefaultCredentials;
// List children
List<CatalogItem> reports = this.RSWebService.ListChildren(folder, false).ToList();
The SQL Server is installed on a different machine (say server A) from the Web server (say server B). We are using Windows Server 2003.
The code work fine for all the scenario below:
i) Run locally (XP) to call the web service on the sql server
ii) Provide the Network Credentials with the username, password, and domain when calling the web service
iii) If the web server and sql server is using same server (i.e. not distributed)
I'm using windows authentication and impersonation. Any idea?Hi Raymond,
If I understand correctly, the issue only happens in the environment that the web server is different with the SQL Server Reporting Services server. This means the web server is a remote server of the Report Server. Windows Integrated authentication is used
in this case. When running the web page, the 401 error occurs.
If so, it is actually a double hop issue. The double-hop problem will usually only be an issue to those of you who write some sort of web-based code (a web application or web service) that uses impersonation.
To fix the issue, we can configure kerberos authentication for the web application and the SQL Server Reporting Services.
Below is a great article that has delivered many solutions to fix the issue you met:
http://odetocode.com/articles/216.aspx
Additionally, you can read the following article to know more about double-hop:
http://blogs.technet.com/b/askds/archive/2008/06/13/understanding-kerberos-double-hop.aspx
http://blogs.msdn.com/b/knowledgecast/archive/2007/01/31/the-double-hop-problem.aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT
Thanks Jin. I believe this is the cause of the problem as well.
I tried to register the SPN but unfortunately it still doesn't work. I'm not sure whether I'm using the correct SPN name.
I have 3 reporting server instance on the SQL box. So the Web Service URL is like
http://Server:80/VirtualDirectoryDev,
http://Server:80/VirtualDirectoryTest and
http://Server:80/VirtualDirectoryStaging .
What's the SPN I need to register?
I tried
Setspn -a http/Server:80/VirtualDirectoryDev domain\account
and
Setspn -a http/aerver:80 domain\account.
But both of them are not working :( -
QSUF (Query string url filter) and SQL Server reporting services report viewer parameters
Hi,
this is my issue:
I have a SQL Server reporting services web part on a page with a report with 1 parameter, lets say it's a client list
Then i have a QSUF that will be used to filter the clients list through the URL
However, once i connect the filter and the report viewer web part, the parameter goes away and is no longer accessible
I'd like to somehow keep the parameter visible, in case there is no parameter sent through the URL, i would like the user to be able to choose a client from the parameter drop down list
I saw that there is a "send empty if no values are passed" option, but i can't seem to get this working properly and i don't know if this option will make the parameter visible again
Any help would be appreciated
Thanks.Hi,
According to your post, my understanding is that the query string url filter web part not worked well with SQL server reproting services web part.
Did you use the Wiki page layout in your environment?
You can change the page to a web part page, then check whether it work.
There is a similar thread for your reference.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/4d7584e3-8e1a-48bf-9346-32f8cb480dd1/query-string-url-filter-web-part?forum=sharepointgeneralprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
SQL Server Reporting Services Configuration Error(Subscription)
I have just deployed a new project on the server and i can successfully run report from the BI Site; [Server Name]\Reports and no issue there. But when i try to create Subscription for the same report; I am trying File Share and it throws error as given
below. Do i have to configure anything for subscription in the Reporting Services Configuration Tool???
I also have few questions regarding Configuration;
What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
Here is the error I am getting in the log file..
ReportingServicesService!library!b!06/17/2010-09:35:04:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for
more information., AuthzInitializeContextFromSid: Win32 error: 110;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
ReportingServicesService!library!b!06/17/2010-09:35:04:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties.
ReportingServicesService!subscription!b!06/17/2010-09:35:04:: Microsoft.ReportingServices.Diagnostics.Utilities.RSException: The report server has encountered a configuration error. See the report server log files for more information. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
at Microsoft.ReportingServices.Authorization.Native.GetAuthzContextForUser(IntPtr userSid)
at Microsoft.ReportingServices.Authorization.Native.IsAdmin(String userName)
at Microsoft.ReportingServices.Authorization.WindowsAuthorization.IsAdmin(String userName, IntPtr userToken)
at Microsoft.ReportingServices.Authorization.WindowsAuthorization.CheckAccess(String userName, IntPtr userToken, Byte[] secDesc, ReportOperation requiredOperation)
at Microsoft.ReportingServices.Library.Security.CheckAccess(ItemType catItemType, Byte[] secDesc, ReportOperation rptOper)
at Microsoft.ReportingServices.Library.RSService._GetReportParameterDefinitionFromCatalog(CatalogItemContext reportContext, String historyID, Boolean forRendering, Guid& reportID, Int32& executionOption, String& savedParametersXml,
ReportSnapshot& compiledDefinition, ReportSnapshot& snapshotData, Guid& linkID, DateTime& historyOrSnapshotDate, Byte[]& secDesc)
at Microsoft.ReportingServices.Library.RSService._GetReportParameters(ClientRequest session, String report, String historyID, Boolean forRendering, NameValueCollection values, DatasourceCredentialsCollection credentials)
at Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters)
at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames)
at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute()
at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]&
secondaryStreamNames)
at Microsoft.ReportingServices.Library.ReportImpl.Render(String renderFormat, String deviceInfo)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.SaveReport(Notification notification, SubscriptionData data)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.Deliver(Notification notification)
I also get following error when I try to create email Subscriptoin
w3wp!processing!6!6/17/2010-09:58:53:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'. ---> System.Data.SqlClient.SqlException: Could not obtain information about Windows NT group/user 'THRY\RPUser',
error code 0x6e.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.ImpersonateUser()
at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.Open()
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.ReportRuntimeDataSourceNode.OpenConnection(DataSource dataSourceObj, ReportProcessingContext pc)
--- End of inner exception stack trace ---
Thanks,
RPHi RP,
For your first issue "cannpt create subscriptions", after analyzing the error logs, it seems to be caused to the service account for the Reporting Services service does not have proper permissions to invoke the WIN32 API.
The SQL Server Reporting Services invokes the Win32 API to impersonate user's permissions to write files to shared folder or call COM+ components.
In this case, we can change the service account to a account has permissions to invoke the Win32 API to solve the issue. For example, we can change the account to be NetworkService or LocalSystem:
1. Backup the encryption key using Reporting Serivces Configuration Manager.
2. Change the service account using Reporting Serivces Configuration Manager.
3. Restore the encryptiong key using Reporting Serivces Configuration Manager.
For your others questions, please see the following inline reply:
--What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
The account should be a Windows account or the SQL Server account, that has read permissions in the source data base at least.
--What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
The account must be a Windows user account. For best results, choose an account that has read permissions and network logon permissions to support connections to other computers. It must have read permissions on any external image or data file that you
want to use in a report. Do not specify a local account unless all report data sources and external images are stored on the report server computer. Use the account only for unattended report processing.
--What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
You are right. It must be a Windows account, which has permissions to access and write files to the shared folder.
For more information, please see:
Configuring the Report Server Service Account:
http://msdn.microsoft.com/en-us/library/ms160340.aspx
Execution Account (Reporting Services Configuration):
http://msdn.microsoft.com/en-us/library/ms181156.aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT
Maybe you are looking for
-
I'd like to write a wiki for the WICD wifi tool, but...
I'd like to write an Arch wiki for the new python-based wicd utility in AUR, but I can't get some of the basic features working. If someone can provide some Arch-specific info, we can get a detailed HOW-TO going for others... So far, I've installed
-
ORA-02287 sequence number not allowed here
Hello Could someone tell my why I get this error with the following select? create sequence dt_test_seq start with 1 increment by 1; create table dt_test_tab (col1 number,col2 number, col3 number); insert into dt_test_tab values(1,1,1); insert into d
-
Elements 10-recvd disc from Adobe for Elements 11??
But Adobe doesn't seem to trying to fix or suggest solutions to those of us that have purchased both 10 and premier 10... other than a discount for 11... However, what's to say that 11 won't do the same thing??
-
*** Import FAILED *** NI-VISA: error code 0x80004001
Hello! What this error mean? I got it when I tried to import .nce file in MAX.
-
Recommended storage profile on Axion Pillar 600 for Ms SQL Server
Hi, I've just read the admin guide for the Pillar SAN and it has down the following recommendations for storage profiles with Ms SQL Server: backup files- raid 5 quorum disk- raid 5 system db- raid 5 temp db- distributed raid data- raid 5 logs - raid