Safari 4 - Loses Custom toolbar settings after restart

After adding for a example a "Home" Button to the toolbar, all worked great. Next time i start Safari this settings are gone.
Safari Version 4.0 (5530.17)

Delete the com.apple.Safari.plist from Users/your username/Library/Preferences.

Similar Messages

  • WRV210 loses port forwarding settings after reboot

    Along with wireless problems that have already been documented about this device I am having problems with port forwarding where it will lose all its settings after losing its power.  I then try to go into the management for port forwarding and am not able to put the settings back in as every time I hit 'Save' it just loads the page back up with no settings applied.  Another strange thing is that the protocol comboboxes only have options for UDP or Both. 
    I then reapply the latest firmware and am able to enter the settings again.
    Any help would be greatly appreciated as I'm at my wits end with this one.
    Thanks,
    Paul

    Dear Paul,
    Thank you for reaching the Small Business Support Community.
    If you are already running the latest firmware release version 2.0.1.5, all I can suggest you is to contact the Small Business Support Center directly to determine if this is a hardware related problem, notice this product is already End of Life/End of Support and therefore the support is subject to warranty or contract terms and conditions;
    https://supportforums.cisco.com/community/netpro/small-business/sbcountrysupport
    Please do not hesitate to reach me back if there is any further assistance I may help you with in the meantime.
    Kind regards,
    Jeffrey Rodriguez S. .:|:.:|:.
    Cisco Customer Support Engineer
    *Please rate the Post so other will know when an answer has been found.

  • I lost safari from home screen and settings after updating to iOS 7.0.2 on Iphone 5

    Lost safari from home screen and settings after updating to iOS 7.0.2 on Iphone 5

    Settings > General > Reset > Reset Home Screen Layout
    If no joy, check whether you have Restrictions set.

  • Lose airport settings after restart

    After restarting powerbook, airport settings are changed and can no longer use bonjour printer or see airport express. As instructed by Apple, if I throw out system configuration folder and restart computer, it works fine again until it is shut down, then same problem. There must be a better answer!

    I'd love an answer to this, I've had this problem for a while now

  • How do I stop safari from reopening previous sessions even after restart?

    Finally made the leap to Lion.
    WHY does safari insist on starting up and restoring the previous session, all tabs and everything even after a restart.  I've looked in preferences and for the life of me cannot find how/where to turn this off.  I just want Safari to start with a blank page, not reloading the previous page/tabs I had open the last time I used it!

    Thanks QuickTimeKirk for the solution to this - have hated this feature as the default. It is useful if you want to return to something specific, but I reckon the majority of users would rather have the defaults the other way around - homepage as default for new Safari sessions and using the shift key when opening to return to last viewed pages/tabs.

  • MacOSX forgetting Magic Mouse settings after restart

    Hello together,
    since today my MacOS X (MacBook Pro, 10.6.6, early 2011) seems to forget my Magic Mouse movement settings every time I restart OSX and after waking up from sleep mode. The settings are always put to minimum automatically.
    Every time I have to fix it in the System settings.
    I have already repaired the HDD access rights and set the Magic Mouse to Favorite. Without effect to the problem.
    Does anybody have an idea what could be the reason for this problem and how to solve it?
    Thanks and Regards
    Manuel

    Manuel,
    Try going into System Prefs->Accounts. Unlock it. Look in "Login Items" and delete MagicPrefs application. Restart your computer. It worked for me...

  • Loses date and time after restart

    It seems as if my MacBook has gotten a bit more sluggish and so I rebooted it. After the reboot the date/time went back to the year 2000. This is not normal. I am not sure if I have a hardware issue or a software issue. I have 2GB's of RAM which is not great, but should be enough for SL. The Mac gets sluggish when more apps are open which is expected with only 2GB's of RAM. But I just wonder if I am having a motherboard issue like I did the last time I had these slowness symptoms on my then Ibook G4.
    John

    Mine just did the same thing. I did a complete shutdown and when I restarted, I had the wrong date and time plus the system had lost my WIFI network password.

  • MacBook forgetting settings after restart

    Hi. I have a very annoying problem with my MacBook Pro 2012 model. Since I updated the MacBook to OSX Mavericks, It has been acting wierd. Every time I restart it, the trackpad and the dock settings resets theirselves. So for example if I add a program or move around some icons in the dock, it resets when I restart the computer. Same with the magic trackpad. Every time I restart the computer, all settings resets. I'm pretty sure it has something to do with me not having the proper file permissions. I have reinstalled OSX and I have tried the disk repairing tool but neither of it worked. Anyone have any ideas? I'm willing to try anything. This is so annoying!

    It seems nobody in the world got this problem...

  • Safari 6 not using cached resources after restart

    I am trying to debug a strange cache control issue that appears to only affect Safari 6. I have been unable to replicate it using Safari 5, or other browsers such as Chrome, Firefox and IE8. I am using Safari 6.0.3 on MacOS 10.8.3
    Starting with a completely cleared cache, I make a request to a website. All the html and images etc are sucked down as normal. All images have a max age of 1 day in their cache control header.
    If I then make another request to the same page, everything works as expected. It pulls down only the html file, and uses the cached images.
    I then close Safari and re-open it, and make a request to the same page. This time, for some reason, it ignores the cache control directives of some of the images (seemingly randomly selected) and pulls down new versions. I have confirmed this by monitoring the apache access log of the website. I can also confirm that the images still exist in the cache (using SafariCacheExplorer), it's just that Safari decides not to use them. I've tested it on multiple websites, including apple.com.
    Has anyone else experienced this? Any help would be greatly appreciated.

    I haven't mucked about with SafariCacheExplorer, but this is a continuing problem on my end.  It's happening persistently on a forum that I run, but I've run it with other browsers on this machine and with other forum users on the same browser/OS, and I'm the one having problems.  I've disabled most of my extensions, but the issue persists.  It's a wee bit maddening.
    GFM

  • Bookmarked pages and custom toolbar disappear after firefox crash?

    There is no way to restore pages and you have to manually re-drag all the buttons onto the toolbar!
    It also seems that if the download window is open, the download time counter messes up your dragging, LOL! Like it updates the time and speed every second, and that resets the position of the item you are dragging, lol! (you wont be able to position the item in just 1 second).
    AND - i also cant drag links from address bar to bookmark folders - it just wont "allow" them in... already tried a clean firefox install with folder deletions etc, but its still the same...
    Something goes wrong during the import??
    firefox version 4.0.1
    windows xp, i7 cpu, 3gigs of ram etc...

    For both part 1 and 2 of your problem, see
    * '''Corrupt localstore.rdf''' - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Corrupt_localstore.rdf
    Rather than dragging bookmarks the following would things easier for you
    * '''Add Bookmark Here ²''' :: Add-ons for Firefox<br>https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
    *http://dmcritchie.mvps.org/firefox/addbookmarkhere2.txt
    For help working with your '''bookmarks and history''' see
    * '''Bookmarks''' - MozillaZine Knowledge Base -- http://kb.mozillazine.org/Bookmarks
    * '''Sorting and rearranging bookmarks''' - Firefox - MozillaZine Knowledge Base -- http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
    * '''Viewing the browsing history''' - Firefox - MozillaZine Knowledge Base -- http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox

  • Why wont my ibook save my settings after restart?

    i have a snow ibook g3 power pc 500mhz, 256mb of ram, 15gb hdd, os x tiger. this is my first mac, i plan on using it as training wheels before i go out and get a macbook air. i have tis problem where i make changes to the dock, short name, time and date, and my wallpaper. every time i restart all of my changes get reseted to what they were before. the only thing that doesnt change is my account name, and when i try to change my short name in finder next to that house thing, it tells me "this name is already in use" though there is no other account. this is really frustrating because i plan on using this wonderful machine when i go back to school, but i want it to be perfect; or very close to. im some what computer savvy, but not when it comes to os x. im using a windows 7 hp and i want to make the switch but i need help.

    Hi, and welcome to Apple Support Communities.
    Changing your short user name via the Finder is a no-no and can cause numerous problems. Use this utility instead:
    http://www.macupdate.com/app/mac/16620/changeshortname

  • Tiger reverts to orginal dock and settings after restart

    Every once in awhile Tiger reverts the dock and all my icons back to the original sizes and items. It also makes the icons the default size and bugs the crap out of me. What the heck is going on?

    The dock reverts when I have to force restart it (by holding the
    power button for 5 seconds.) So...
    A hard computer shut down or restart is not good for a hard drive under any platform and having to do so with OS X should be rare. I can't remember the last time I was forced to perform a hard shut down or restart with my PB.
    As a first step, I suggest Resolving Disk, Permission, and Cache Corruption for system troubleshooting procedures and when doing so, follow all steps/instructions in the order provided.

  • Re: MSI Gaming 5 motherboard loses its BIOS settings after power outage.

     Yup, it could be a short causing CMOS to clear whenever MB loses power for whatever reason. Also check JBAT1 (clear CMOS jumper) and insure there is no jumper or no bent pin(s) there. Check this 1st before going to the trouble of removing MB for testing.

    Quote from: dmcconnaughie on Today at 21:37:53I have been wondering the same thing. I have a corsair hx750i and have connected to the CPU with the 8 pin connector. I don&#39;t have a 4 pin connector but the psu also d...

  • Display loses brightness after restarts

    I have a question that I can't seem to find the answer to. Since some update (can't remember which one), my MacBook Pro will lose it's brightness after restarting. But here's the funny part, it doesn't lose it "quickly" after a restart. For instance, I use cocktail to run at night. When my MacBook Pro restarts, the brightness is perfect. But... if I leave it at the login-screen (I use username/password to enter desktop), it eventually will turn off the brightness. I can't tell you how long after restart since I never timed it or saw it do it. It's just that every morning, my mac is sitting with no brightness on the login screen. Then I have to hit the brightness button.
    Any suggestions? I've reset the NVRAM and reset the PRAM. I guess I should take it off the login and see if it dims the desktop after logging in after a restart.
    Bryan

    You might check "Options" under Energy Saver and see if the box is checked that says "Automatically reduce the brightness of the display before display sleep". I don't know if this is relevant, but you could uncheck it and see if it makes a difference.
    Good luck!

  • After upgrading to 5.1 safari cannot connect to any server, after upgrading to 5.1 safari cannot connect to any server

    I have upgraded to safari 5.1 through auto update
    After restart the safari does not connect to any server saying it cannot find them
    other browsers such as Minefield work fine and the internet connection works fine
    The computer is connected via airport to a router, firewall is active.
    Safary 5.06 worked without any glitch
    any ideas?

    I have the same problem but im on Lion, All my web browsers seem to work perfect but not Safari. : (

Maybe you are looking for

  • Portal 309 does not work ...

    gurus, i've installed 9iAS 10220 on windows 2000 with 817 database. i have the following problems - 1. apache would crash in couple of seconds after etting started - fixed it by commenting the following in oracle_apache.conf - # include "D:\ORACLE\or

  • Blog entry without photo

    Is there an easy way to add a blog entry without a photo? It defaults to the page with the photo. I deleted the photo, but then the text remains in the same place with a large blank space between the top of the page and the text. This seems cumbersom

  • How do I Add a Picture Frame Around a Flash Video?

    I tried searching for this but "frame" has too many meanings. I have flv videos inserted in several web pages, but they look dull without some sort of fancy border or frame around them. Maybe a picture frame. Maybe the image of a flat screen TV surro

  • Query to retrieve next valid record

    Hi All I have a strange requirement to write a query/logic to achieve the following. I have a table which has a date column and a field which signifies whether it is a valid date or not Date Valid 11/01/2010 Y 12/01/2010 N 13/01/2010 N 17/02/2010 Y 1

  • Going from LAN to the Internet...

    Hello, I have little to no experience with networking... but what I am attempting to do is allow users to connect to a Server I have running on my home computer from "anywhere" instead of just inside my house connected to the LAN. I've tried to searc