Safari audio goes through built in speakers

I am using an Edirol FA-66 audio interface and the default audio output is set to this, however recently the audio from safari (and firefox if used) comes through my built in speakers (as does the bbc radio widget) and volume is not controllable with the mute button and volume controls on my keyboard, it is only controlable from the audio midi setup internal audio volume slider. All other apps (iTunes, logic, vlc etc. etc.) come out via my interface. Its obviously a hassle.
Any ideas as to what has caused this and how i can resolve the issue?
iMac G5   Mac OS X (10.4.8)   2GHz, 512 RAM

Most apps that have an equalizer tap into the digital stream and introduce a noticeable delay into the audio. If you need to keep some video in synch with the audio, then an app such as airfoil, which I use won't work. Just to let you know when you search.
Here are some that seem to fit your requirements
http://mac.softpedia.com/downloadTag/audio+equalizer

Similar Messages

  • No sound through built-in speakers

    The only output device listed in System Preferences > Sound is Name: "Digital Out" ; Type: "Headphone port" and can't get sound  through the built-in speakers unless earphones are plugged in. How can I change this to the correct output device?

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers / Headphones
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • No sound through built-in speakers (dv7-1243c​l)

    There is no sound through the built in speakers. The mute button on the touchbar under the screen is lit up red but the icon on the screen shows that it is unmuted. Whenever I try to disengage the mute on the bar, the light stays red but the volume icon changes. I'm pretty sure that its muted through the touchbar, is there specific software to re-install the touchbar?

    Hi,
    Download but don't install:
    IDT audio sp45073
    Disconnect from Internet.
    Uninstall from your system IDT audio drivers.
    Resources:
    Uninstalling Software in Windows 7
    Uninstall or change a program in Windows 7
    How to uninstall or change a program in Vista
    Restart your system:
    On boot press ' F8 ' and choose ' Safe mode '.
    Go to:
    Control Panel -> Devices Manager -> Audio, Video and Games Controllers
    and find there IDT audio card. Click on it with right button of your mouse and choose uninstall driver.
    Restart your system and this time start it in normally.
    Install this audio driver which You already downloaded.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • No sound only through built in speakers!!!!!!!!!!!!

    I have just had the ipod nano 5th generation but cant get no sound! The sound is coming through the built in speakers. Ive tried the headphones and on the dock but still no sound!!! Ive gone through all the settings and sound checks and theres nothing in the manual does any one know how to fix this????

    Yes, make a Genius Bar appointment at your nearest Apple Store to have it replaced, or take it back to where you bought it and exchange it.

  • Blu-Ray audio only through TV internal speakers...not surround.

    Just got a Toshiba 50L1400U. Two issues here......
    1) When the HDMI cable from the Panasonic smart Blu-Ray player is connected to the HDMI port #2 on the TV audio only comes from the internal speakers and not out of the surround. The cable box currently functions fine as did the Blu-Ray HDMI connection with our old Toshiba TV with audio coming from the surround. Suggestions?
    2) Is there a way to turn off the bar at the top of the TV screen to not show when it switches between 2 HD screens while changing stations? Meaning some stations are in 480p with most being in 1080p but the bar shows when swtiching between the 2.
    Thank you for any help.

    I don't believe there's a way to disable that bar.
    As for the sound, you might want to call customer support.
    - Peter

  • Safari keeps going through my RAM and CPU

    Hello, I have the up-to-date (5.1) version of Safari running on my OS X Lion. Despite the update, I'm still experiencing RAM and CPU downfalls because of the process "Safari Web Content", most of all when I surf the Facebook website (sometimes it reaches 75% CPU and 1.7GB RAM levels).
    Do I simply have to wait another Safari update to fix this or is this completely normal? Before the Lion update I did not experience this bug, as I remember.
    Thanks in advance.
    Giovanni

    The problem evolved. Thanks to another question, I realized some Safari extension could make the RAM collapse, like 1Password extension. But now if I want to disable them, the Extension tab in preferences just remains blank!

  • Stereo audio too far right on built in speakers?

    My stereo audio on the built in speakers is way off. Anyone else have this audio issue with their Macbook Pro 2.5 GHz i5, 4GB? The audio is pushed towards the right side way more. I've checked the system settings and the slider is right in the middle, but to get it so it sounds remotely balanced, I have to push it to about 25% from the left. So I checked this with my headphones and to my surprise, the headphones are properly balanced with the system settings sound in the center position.
    So that lead me to try this... using the built ins I slid the balance all the way over to the RIGHT side... left speaker goes silent. But when I slid the slider all the way to the LEFT, sound is still coming out the right speaker. So that is a bit of an inconvenience. Any insight?

    There's a "center channel" speaker for bass that's located towards the right side. That's probably where you're hearing the sound when you have the balance control set all the way to the left.

  • Problem with audio of my notebook. Audio works through pc speakers and earphones at the same time

    Hi all, 
    thanks in advance for your advices.
    I have a problem with my notebook (HP pavilion g6 2305 sl).
    The problem is that when I connect my earphones the audio of my pc don't stop, hence I can hear (music, film, ...) both by earphones and speakers at the same time.
    I tried to install again the latest driver audio, but nothing was changed.
    I tried to use another pair of earphones, but nothing.
    I have noted that if I connect the Jack at my pc, but not until the end, the audio stops from the speakers and goes through the earphones, but only if the jack is not completly inserted in the notebook.
    I read a lot of forum on the web but I'm not able to find a solution for my problem.
    (ps. the problem comes out suddenly, without any signal. I don't have installed any update or new software before the problem's start)

    Right click on speaker icon, lower right screen.
    Choose playback devices.
    Select "speakers and headphones" as your default.
    Disable "communications headphones".

  • After 10.6.4 update, some audio not going through

    After the 10.6.4 update I've been having trouble with some audio not going through the USB headset.
    Things that refuse to go through the headset:
    * Empty trash noises
    * Skype notification noises
    * iChat alert noises
    Things that are working:
    * Coloquy
    * iTunes
    I've tried toggling the System Preferences obviously. Unplugging speakers and USB headset and plugging back in a number of times (this seemed to fix some things, not others).
    Anyone else having the same issue?
    (Note to forum mods: you need to add 10.6.4 to your OS dropdown)

    Reseting the PRAM has solved this problem.
    http://support.apple.com/kb/ht1379

  • I was wondering if you could have one desktop audio playing through your speakers and the other one playing through your apple tv at the same time?

    i was wondering if you could have one desktop audio playing through your speakers and the other one playing through your apple tv at the same time?

    Problem here is you admit you cannot afford the service.
    And you want to blame Verizon for losing a job because you have no cell phone.
    If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
    No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
    Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
    Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
    Good Luck

  • ATV3 - I need to enable dolby digital for optical surround sound (netflix and home movies), but when I do this it stops audio coming through TV speakers

    I have a cinema sound receiver connected to Apple TV via optical cable.  When I have dolby digital set to Auto it doesn't come through as dolby digital when watching movies on netflix and iTunes (home movies).
    If I set Dolby Digital to ON it works as expected, but the sound stops working through normal TV speakers (via HDMI).  This is the same for netflix and home movies.
    I tried 16 bit setting, but it made no difference.
    Any advice on how I can get this working - meaning Dolby Digital always on for when I turn my surround sound on and sound through speakers for normal operation?
    Obviously I can change the setting when needed, its just a pain.
    Thanks in advance.

    Hello everyone, 
    here is the friendly and signed driver installation method to enable Dolby Digital Plus in your Encore internal speakers only. This is not an official driver, there is no control panel for Dolby Digital Plus or various sound effects, but tested and has much better and richer surround sound quality as before with factory driver. I guess, this driver tweak can work with any Bay Trail tablet also.
    How can you upgrade Encore sound drivers:
    1. Download signed driver package and extract.
    2. Open Device Manager.
    3. Upgrade your Sound, Video and game controllers
    - Intel SST Audio Device
    - Realtek I2S Audio Codec
    one by one with "Have a disk" method.
    4. Double click enabledolby.reg file and add to your registry.
    5. Restart, and enjoy better sound quality.
    Thanks.
    UPDATE: Official Toshiba Dolby Digital leaked, official driver attached: ToshibaDolby.zip
    - Encore with WimBoot -
    Attachments:
    EncoreDolby.zip ‏310 KB
    ToshibaDolby.zip ‏1310 KB

  • [solved] HDMI audio only through laptop speakers

    I am running archlinux on an original surface pro with alsa. All sound works fine except that with an hdmi cable plugged in the audio still routes through the surface speakers and never through the tv or lcd projector. I have googled a plenty, but not found a fix. Any advice for what I should be trying would be appreciated.
    Here is what aplay -L shows
    britt@superman ~ $ aplay -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    sysdefault:CARD=PCH
    HDA Intel PCH, ALC280 Analog
    Default Audio Device
    front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC280 Analog
    Front speakers
    surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC280 Analog
    2.1 Surround output to Front and Subwoofer speakers
    surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC280 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC280 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC280 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC280 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC280 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, HDMI 0
    HDMI Audio Output
    I notice the front and HDMI card,device specification seems to be the same.
    Thanks in advance, Britt
    Last edited by brittanderson (2015-01-09 21:33:04)

    Finally found the right page. My problem was solved by editing ~/.asoundrc as described here:
    https://wiki.archlinux.org/index.php/Ad … s_not_work

  • My sound is coming from my built in speakers instead of through the headphone jack.

    I have an Envy 15 1270ca and last night it froze while I was listening to music, forcing me to manually shut it off by holding down the power button. When the computer came back on, my sound was coming out of my built-in speakers instead of my external speakers through the headphone jack. I checked the speakers through my mp3 player, so I know that they are working, so it seems to be the jack which is not working.
    Any help is appreciated!
    This question was solved.
    View Solution.

    Please Reinstall the sound Drivers and Make sure that the no ear phones are plugged in when we reinstall the sound drivers, this should work even after doing this if its not working then please set the BIOS to defaults this should work
    I am an HP employee

  • Could you play a live stream from safari to apple tv without going through itunes?

    could you play a live stream from safari to apple tv without going through itunes?

    There is no way to stream Safari content, with or without iTunes, to your AppleTV.
    The only way would be to use a mirroring feature given that you have an AppleTV 2nd gen or newer and a 2011 or newer MBP running mountain lion.
    If not, some third party software like AirParrot can also gives you way to mirror your MBP display on the TV.

  • HP Pavillion dv5-1235dx laptop - No audio from built in speakers of recently purchased laptop

    I purchased my laptop (HP Pavillion dv5-1235dx laptop) from best buy on Saturday, May 9th, less then a week ago. Yesterday the audio/sound stopped working completely - from the built-in speakers.  I can hear ALL sound just fine from headphones.  Only the internal speakers aren't funcioning.  I did online troubleshooting, and also chatted with a technician, and I still have the same problem.  I ran all updates, the status on the sound driver says it is funcioning properly.  Even the little fluctuating green bars (on the volume control) SHOW that sound is coming out, but still unless I have headphones in, no sound comes out.  The HP monitering software DID pop up and say there were critical errors and the computer needed to be updated yesterday, but I don't know if that was related because once I did all the updates, the audio still had the same problem.  Please help me out.
    Thanks,
    Kalli

    If it is less then a week, just return it to bestbuy. You may have a loose connection in speaker jack.
    Have you try to use recovery DVD? try to install it to the factory setting.
    If it does not work, definitely you have a hardware problem.
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Maybe you are looking for

  • IPhone 4 voice call problems on 3G

    I noticed at the weekend that my iPhone 4 was having trouble with voice calls. Incoming calls would sometimes hang up when I answered them, outgoing calls would take a very long time to connect (or freeze), and when I did get through to someone the c

  • HeHelp! I just synced my husbands iphone and it copied all of my data onto his phone...How do I put it back the way it was before I synced it???

    Help!!!  I just synced my husbands iphone and it copied all of my data onto his iphone, such as Apps and my Phone numbers.  How do I reset it to back where it was before I synced it???? Thanks, Jerri

  • Can't put image into the body of Yahoo Email.

    Although easily done using I.E or Outlook, any attempt to paste an image into the body of a Yahoo Mail results in nothing happening when using Firefox. I do NOT want to use I.E. This is a major problem. Attachments are no solution. In many industries

  • Support for DNG files from Odyssey7Q.

    Just upgraded my Odyssey7Q to capture 4K RAW from the FS700. Importing the DNGs into Premiere yields an extremely purple image. The DNGs import fine in After Effects. Any chance to get this addressed in a Premiere update?

  • FTP SERVER DOUBT

    hi this is giri. i have one doubt. if my scenario is file to idoc.iam having legacy system, ftp server, xi server and sap r/3.now 1.how can i pull a specific file from legacy system to FTP server. is there any doc means please farward it to me .... t