Safari, dashboard & help not working after 10.4.9

I have loved my iBook since day 1, until 10.4.9. This is my first Apple computer and I was very close to being a convert. I updated through sys prefs to 10.4.9 and now: Safari opens for a split second then closes with kernel errors (or I least I assume from the crash log), no more widgets and dashboard does not work and help files do not work. What gives? I tried downloading the combo update but it was a .exe file. Forgive my lack of tech know how, I know some, enough to get me in trouble evidently. Any help would be greatly appreciated. I have tried booting into safe mode, Safari does the same thing, I have tried repairing permissions in safe mode and in regular mode as admin, nada. HELP!

I originally updated through sys pref and just let it go. One day later things stopped working. Repairing permissions etc did nothing. Applied the combo update, verified the disk before hand, repaired permissions after the update and reboot, now things are back to normal as far as I can tell, better even in some areas. Hope this can help others with similar problems.

Similar Messages

  • Java Desktop Overview (jds-help) not working after upgrade to jdk6u1

    Hello,
    I am running Sol 10 11/06 for sparc on a Sun Blade. I just upgraded to jdk6u1 from jdk5. I installed all required j6 packages, and then installed patches for j6u1. Java seems to be working fine. I then used pkgrm to remove all jdk5-related packages (I searched for all packages starting with SUNWj5 and then removed them).
    Now, my Desktop Overview and other java-related help functions do not work. I get this error:
    # jds-help ghelp:jdsoverview
    ** (jdshelp:826): WARNING **: An exception occured 'Unknown CORBA exception id: 'IDL:omg.org/CORBA/COMM_FAILURE:1.0''
    Maybe I removed a j5 package I shouldn't have. Which j5 packages are related to the operation of jds-help? Any ideas as to what is causing my problem with jds-help?
    Thank you...

    Here is the error log:
    "hs_err_pid1338.log" [Read only] 215 lines, 9100 characters
    # An unexpected error has been detected by Java Runtime Environment:
    # SIGSEGV (0xb) at pc=0xfc94dd6c, pid=1338, tid=1
    # Java VM: Java HotSpot(TM) Client VM (1.6.0_01-b06 mixed mode, sharing)
    # Problematic frame:
    # V [libjvm.so+0x14dd6c]
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    --------------- T H R E A D ---------------
    Current thread (0x000a6400): JavaThread "main" [_thread_in_vm, id=1]
    siginfo:si_signo=11, si_errno=0, si_code=1, si_addr=0x00000000
    Registers:
    O0=0xffbfe5b4 O1=0x000a6400 O2=0x00000000 O3=0x00000000
    O4=0x000000b5 O5=0xffbfe5e0 O6=0xffbfe550 O7=0xfc94dd24
    G1=0x00010c8c G2=0x00010c00 G3=0x00010ce8 G4=0x00010c00
    G5=0x00000000 G6=0x00000000 G7=0xfc532000 Y=0x00000000
    PC=0xfc94dd6c nPC=0xfc94dd70
    Top of Stack: (sp=0xffbfe550)
    0xffbfe550: fce14154 fcdfe000 fce1238c 00000000
    0xffbfe560: fce0ece8 ffbfe5b4 fce0ec8c 0000cf44
    0xffbfe570: 000a64e8 00000000 00000000 000a6400
    0xffbfe580: 00000000 fce0af44 ffbfe5f0 00014410
    0xffbfe590: 00000000 00000000 00000000 00000000
    0xffbfe5a0: 00000000 00000000 00017254 00000000
    0xffbfe5b0: 00000000 fce0ece8 0001c4a4 00000000
    0xffbfe5c0: ffbfe5f0 000143ac 001174f0 ffbfe66c
    Instructions: (pc=0xfc94dd6c)
    0xfc94dd5c: ac 04 40 01 aa 10 00 08 92 10 00 1b e8 27 bf c4
    0xfc94dd6c: de 06 a0 00 e6 03 e0 08 d6 03 e0 0c da 14 e0 26
    Stack: [0xff400000,0xffc00000), sp=0xffbfe550, free space=8185k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    V [libjvm.so+0x14dd6c]
    C [jdshelp-server+0x4418]
    C [jdshelp-server+0x590c] ORBITskel_small_JDS_OnlineHelp_Viewer_display+0x54
    C [libORBit-2.so.0.0.0+0x228b4] ORBit_small_invoke_adaptor+0x43c
    C [libORBit-2.so.0.0.0+0x35338]
    C [libORBit-2.so.0.0.0+0x35518]
    C [libORBit-2.so.0.0.0+0x35af4]
    C [libORBit-2.so.0.0.0+0x3ac54] ORBit_handle_request+0x58
    C [libORBit-2.so.0.0.0+0x1e33c] giop_connection_handle_input+0x288
    C [libORBitCosNaming-2.so.0.0.0+0x7e94]
    C [libglib-2.0.so.0.400.1+0x55ad0]
    C [libglib-2.0.so.0.400.1+0x57004] g_main_context_dispatch+0xa4
    C [libglib-2.0.so.0.400.1+0x574d0]
    C [libglib-2.0.so.0.400.1+0x57c4c] g_main_loop_run+0x350
    C [libbonobo-2.so.0.0.0+0x24154] bonobo_main+0x74
    C [jdshelp-server+0x4d14] main+0xe4
    --------------- P R O C E S S ---------------
    Java Threads: ( => current thread )
    0x00113400 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=7]
    0x00111800 JavaThread "CompilerThread0" daemon [_thread_blocked, id=6]
    0x00110800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=5]
    0x000ce000 JavaThread "Finalizer" daemon [_thread_blocked, id=4]
    0x000cd000 JavaThread "Reference Handler" daemon [_thread_blocked, id=3]
    =>0x000a6400 JavaThread "main" [_thread_in_vm, id=1]
    Other Threads:
    0x000c3c00 VMThread [id=2]
    0x00115400 WatcherThread [id=8]
    VM state:not at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: None
    Heap
    def new generation total 1984K, used 208K [0xd0400000, 0xd0620000, 0xd0b10000) eden space 1792K, 11% used [0xd0400000, 0xd0434398, 0xd05c0000)
    from space 192K, 0% used [0xd05c0000, 0xd05c0000, 0xd05f0000)
    to space 192K, 0% used [0xd05f0000, 0xd05f0000, 0xd0620000)
    tenured generation total 4096K, used 0K [0xd0b10000, 0xd0f10000, 0xd4400000)
    the space 4096K, 0% used [0xd0b10000, 0xd0b10000, 0xd0b10200, 0xd0f10000)
    compacting perm gen total 12288K, used 27K [0xd4400000, 0xd5000000, 0xd8400000) the space 12288K, 0% used [0xd4400000, 0xd4406d98, 0xd4406e00, 0xd5000000)
    ro space 8192K, 80% used [0xd8400000, 0xd8a6f968, 0xd8a6fa00, 0xd8c00000)
    rw space 12288K, 59% used [0xd8c00000, 0xd93298a8, 0xd9329a00, 0xd9800000)
    Dynamic libraries:
    0x00010000 /usr/lib/jdshelp-server
    0xff370000 /usr/lib/libORBitCosNaming-2.so.0
    0xff280000 /usr/lib/libgnomeui-2.so.0
    0xff250000 /usr/lib/libSM.so.6
    0xff210000 /usr/lib/libICE.so.6
    0xff190000 /usr/lib/libbonoboui-2.so.0
    0xff000000 /usr/lib/libxml2.so.2
    0xff3ec000 /lib/libpthread.so.1
    0xff330000 /usr/lib/libz.so.1
    0xfefb0000 /usr/lib/libgnomecanvas-2.so.0
    0xff150000 /usr/lib/libgnome-2.so.0
    0xfef90000 /usr/lib/libpopt.so.0
    0xfef60000 /usr/lib/libart_lgpl_2.so.2
    0xfef20000 /usr/lib/libpangoft2-1.0.so.0
    0xfec00000 /usr/lib/libgtk-x11-2.0.so.0
    0xfeb00000 /usr/lib/libgdk-x11-2.0.so.0
    0xfebd0000 /usr/lib/libatk-1.0.so.0
    0xfeba0000 /usr/lib/libgdk_pixbuf-2.0.so.0
    0xfd800000 /usr/lib/libmlib.so.2
    0xfeae0000 /usr/lib/libpangoxft-1.0.so.0
    0xfeac0000 /usr/lib/libpangox-1.0.so.0
    0xfd7b0000 /usr/lib/libpango-1.0.so.0
    0xfd730000 /usr/lib/libbonobo-2.so.0
    0xfd6e0000 /usr/lib/libgconf-2.so.4
    0xfd660000 /usr/lib/libgnomevfs-2.so.0
    0xfd630000 /usr/lib/libbonobo-activation.so.4
    0xfd5c0000 /usr/lib/libORBit-2.so.0
    0xfd540000 /usr/lib/libgobject-2.0.so.0
    0xfd4e0000 /lib/libresolv.so.2
    0xfd400000 /lib/libnsl.so.1
    0xfd3d0000 /lib/libsocket.so.1
    0xfd300000 /lib/libm.so.2
    0xfd4c0000 /usr/lib/libgmodule-2.0.so.0
    0xfd2e0000 /usr/lib/libgthread-2.0.so.0
    0xfd200000 /usr/lib/libglib-2.0.so.0
    0xfc800000 /usr/java/jre/lib/sparc/client/libjvm.so
    0xfd000000 /usr/java/jre/lib/sparc/libawt.so
    0xfce80000 /usr/java/jre/lib/sparc/libmlib_image.so
    0xfd1c0000 /usr/java/jre/lib/sparc/libjava.so
    0xfcfd0000 /usr/java/jre/lib/sparc/libverify.so
    0xff3a8000 /lib/libthread.so.1
    0xfc700000 /lib/libc.so.1
    0xfcfb0000 /usr/lib/libgnome-keyring.so.0
    0xfd1a0000 /usr/lib/libgailutil.so.17
    0xfce40000 /usr/lib/libjpeg.so.62
    0xfc600000 /usr/lib/libX11.so.4
    0xfc6c0000 /usr/lib/libXft.so.2
    0xfc5d0000 /usr/sfw/lib/libXrender.so.1
    0xfc570000 /usr/lib/libfontconfig.so.1
    0xfc480000 /usr/sfw/lib/libfreetype.so.6
    0xfc550000 /usr/lib/libesd.so.0
    0xfc440000 /usr/lib/libaudiofile.so.0
    0xfc410000 /usr/X11/lib/libXrandr.so.2
    0xfc3e0000 /usr/lib/libXi.so.5
    0xfc390000 /usr/lib/libXext.so.0
    0xfc340000 /usr/sfw/lib/libssl.so.0.9.7
    0xfc200000 /usr/sfw/lib/libcrypto.so.0.9.7
    0xfc1e0000 /lib/libdl.so.1
    0xfc1c0000 /lib/librt.so.1
    0xff3a0000 /usr/lib/libsched.so.1
    0xfc1a0000 /lib/libm.so.1
    0xfc170000 /usr/lib/libCrun.so.1
    0xfc150000 /lib/libdoor.so.1
    0xfc120000 /lib/libaio.so.1
    0xfc100000 /lib/libmd5.so.1
    0xfa000000 /usr/lib/cpu/sparcv8plus+vis/libmlib.so.2
    0xfc548000 /platform/SUNW,Sun-Blade-100/lib/libc_psr.so.1
    0xfc0c0000 /usr/lib/iconv/UTF-8%8859-1.so
    0xfc080000 /lib/libmp.so.2
    0xf9fd0000 /lib/libscf.so.1
    0xf9fb0000 /lib/libuutil.so.1
    0xf9f50000 /usr/sfw/lib/libexpat.so.0
    0xf9f30000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/native_threads/libhpi.so
    0xf9f10000 /platform/SUNW,Sun-Blade-100/lib/libmd5_psr.so.1
    0xf9ed0000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libzip.so
    0xf9eb0000 /usr/lib/iconv/UTF-8%646.so
    VM Arguments:
    java_command: <unknown>
    Launcher Type: generic
    Environment Variables:
    JAVA_HOME=/bin/java
    PATH=/usr/sbin:/sbin:/bin:/usr/xpg4/bin:/usr/bin:/usr/local/bin:/opt/SUNWspro/bin:/usr/ccs/bin:/etc:/usr/etc:/usr/X11:/etc/X11:/usr/X11/bin:/usr:/usr/openwin/bin:.:/home/barnabyr:/usr/openwin/lib:/usr/dt/bin:/opt/sfw/lib/firefox:/opt/sfw/lib/thunderbird:/usr/ucb:/usr/X11/lib:/usr/sfw/bin:/usr/ucb
    LD_LIBRARY_PATH=/lib:/usr/lib:/usr/sfw/lib:/opt/sfw/lib:/usr/local/lib:/usr/X11:/usr/X11/lib:/usr/include/X11:/usr/dt/lib:/usr/openwin/lib:/space/spectral_progs/xforms/FORMS
    SHELL=/bin/csh
    DISPLAY=:0.0
    Signal Handlers:
    SIGSEGV: [libjvm.so+0x4e4710], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
    SIGBUS: [libjvm.so+0x4e4710], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
    SIGFPE: [libjvm.so+0x172a38], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
    SIGPIPE: [libjvm.so+0x172a38], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
    SIGILL: [libjvm.so+0x172a38], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
    SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
    SIGUSR2: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
    SIGHUP: [libjvm.so+0x415910], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
    SIGINT: [libjvm.so+0x415910], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
    SIGQUIT: [libjvm.so+0x415910], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
    SIGTERM: [libjvm.so+0x415910], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
    SIGQUIT: [libjvm.so+0x415910], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
    SIGTERM: [libjvm.so+0x415910], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
    SIG39: [libjvm.so+0x418438], sa_mask[0]=0x00000000, sa_flags=0x00000008
    SIG40: [libjvm.so+0x172a38], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
    --------------- S Y S T E M ---------------
    OS: Solaris 10 11/06 s10s_u3wos_10 SPARC
    Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
    Use is subject to license terms.
    Assembled 14 November 2006
    uname:SunOS 5.10 Generic_125100-06 sun4u (T2 libthread)
    rlimit: STACK 8192k, CORE infinity, NOFILE 65536, AS infinity
    load average:0.66 0.85 0.91
    CPU:total 1 has_v8, has_v9, has_vis1
    Memory: 8k page, physical 2097152k(1383752k free)
    vm_info: Java HotSpot(TM) Client VM (1.6.0_01-b06) for solaris-sparc, built on Mar 14 2007 01:17:32 by "" with unknown Workshop:0x580

  • Safari on dock not working after update

    I just updated my macbook pro with the updates that came out on OCT22 and now safari on my dock doesn't work. Why? Everything else on my dock is working.

    As a starting point drag the icon off the dock (it should vanish in a puff of smoke)
    Then go to the applications folder and try to open Safari, if it opens then the application if fine. Close it, then go to applications folder and drag the application to the dock and drop it there, this will create a new short cut. (maybe the old was corrupted)

  • Safari and iTunes not working after 10.7.1 update

    Has anyone else out there had the same experience?

    The thing is that sometimes software updates cause more problems than good. Now roll back to the previous version. This is my advice.

  • Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

    Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

    ejwoodall wrote:
    It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
    Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
    I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
    The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
    If your machine performs flawlessly, it may be a router issue.
    If your machine has connectivity issues there, it may be a hardware problem with your machine.
    There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
    But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
    In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

  • TS1702 My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem?

    My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem? Can somebody help me please?

    The App store is a problem for many and I have not seen a solution.
    What is "wrong" with your Apple ID?
    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.

  • Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Hey there sarunelis,
    It sounds like after updating to 10.9 the zoom function is not functioning at all. It sounds like you may need to check for 3rd party plugins. This article will help you check for that.
    Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    http://support.apple.com/kb/ts3230
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Dashboard widgets not working. I trash the dashboard .plist and redo all widgets then after a restart. Widget not working again.

    Dashboard widgets not working. I trash the dashboard .plist and redo all widgets then after a restart. Widget not working again.

    Yes hello,
    My widgets are not working as well, i looked on forms and it seams that the 10.5 update fix there problems. I also did an archive and install from 10.4... One of the major reasons i purchased the upgrade was to use widgets to clip parts of safari, i'am totaly bummed because all forums i find end with the question un answered. i'am a little bummed becuase there are a couple of things that worked with 10.4 that are not working in 10.5 (like some meg moives not playing.
    i do not wish to create a new account because i do not want to reinstall all my software, photoshop, final cut, dvd studio pro.. etc.
    i hope to find the fix some how.
    I have opened up the console application and when i select widgets load or delete them i see no activity in the console. I'am not familiar with the console app. or command lines.
    is there any more info on this matter? is there any support from apple?
    Thankyou

  • My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

    My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

    Please let me know , How we can reinstall apple mail ? .
    1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
    2.  After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
             a)Not showing any SMTP connection in TCP trace ,
             b) Connection docter every time Says "Connecting to the server "
    3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
    Please help me .
    Thanks,
    Ranesh..

  • My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
    Have you tried deletting the plists for MAS?
    This page might help you out...
    http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
    Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
    Let me know how you get on?
    Thanks.

  • Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

    Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
    what cAN i do to make it work?please help

    Hi:
    If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

  • The sound in my IPad is not working after I downloaded the new iOS 7. I tried to reset the IPad to no avail. Could anyone be so kind to help me?

    The sound in my IPad is not working after I downloaded the new iOS 7. I tried to reset the IPad to no avail. Could anyone be so kind to help me?

    I"m going to make the presumption that you've checked the volume and that you don't have it muted. One thing some have suggested is to go into the settings and reset all settings.
    It is kind of a drag because you wil have to retweak everything but it's helped for some.

  • My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

    My printers are not working after mavericks install.
    The printer just PAUSE and can't be resumed.
    What can I do to fix - PLEASE HELP!
    It is my lifeline - we are a print shop!

    Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
    Then open System Preferences > Printers & Scanners > Print
    Select your printer on the left then click -  (minus)
    Then click + (plus) to add the printer.

  • TS3367 Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

    Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

    Was it just this one time?  Could be that you, or your mom, were experiencing network problems.  Try again at a later time.

  • Safari not working after reinstall

    Hi there,
    I had issues with my Safari (it woudn't start after the new upgrade), so I had to reinstall it (had to use AppDelete). The reinstallation worked fine, the program now starts (it used to get stuck at the beginning, with the icon bouncing on the dock and doing nothing), but now the browser doesen't seem to go on the internet anymore. All it does is waiting and timing out. Chrome,Opera and Firefox are working just fine. I am guessing the problem is the new installation, how can I fix this? I'm on the latest version of Lion, latest version of Safari downloaded from the official Apple site.
    Thanks in advance

    It is not very clear what you did, therefore difficult to recommend something. I understand you upgraded from SL to Lion, and Safari did not work AFTER that upgrade? Strange, does not seem plausible. Or what other upgrade did you do? Safari is a component of the system, and should NEVER be deleted via AppDelete or any other similar app.
    As I do not know what you exactly did, I would recommend to download the 10.7.2 combo update (a dmg, around 1 GB), reinstall it as a separate download. After restart, all should be again fine.
    How did you reinstall Safari after deleting it with AppDelete? You write ‘The reinstallation worked fine’, could you clarify what you did?

Maybe you are looking for

  • Mouse with PS/2 to USB adapter not working

    I recently got a laptop and decided to switch from Ubuntu to Arch Linux, and apart from not having 3D acceleration for my graphics card, most things are working quite fine. Because I don't have 3D acceleration, one of the few games I can play is Unre

  • Yosemite 10.10.1 update did not fix my wifi issue, did it fix yours??

    The discussion about wifi issues is nothing new since Yosemite came out.  Today I installed the latest update (10.10.1) which was to help with wifi issues such as your wifi dropping.  I have tried every remedy that has been posted and nothing has wor

  • Oracle Syntax for Update with Join

    Can anyone help with the Oracle Syntax on and update that includes a join? This is what I've got: Update (SELECT a.DOCUMENT_NO From DOCUMENT_CONTROL a, DOCNOTEST b where a.DOCUMENT_NO = b.DOCUMENT_NO) set a.PATH = NULL Everything I try leads to anoth

  • Playing SWF and corresponding FLV on standalone computer

    I have nice results encoding AVI's with Flash CS3 Video Encoder, and making SWF with embedded chapters, in Action Script 3 with Flash CS3 Professional. I put these SWF's and FLV's on DVD; they are nicely played on my computer, in the Adobe Flash Play

  • Load external XML file

    I am trying to write a test program. I have a program that is going to get it's data from an XML file when it is first loaded. That XML file is going to be a local file that sit's in same folder as the flex program (rather than online or through a ur