Safari does not display images

Yesterday - suddenly- Safari stopped displaying images on any web page. Fo example on Apple.com the picture of the large Apple does not come up and so on. Should I re-install Safari- download again? Just to check the images DO display in Explorer which I had to use to post this.
thank you.
j
G5 and 17 inch pb and 12 inch pb   Mac OS X (10.4.8)  

I had exactly the same trouble. I followed these instructions--emptied the cache and ditched the plist file, and when I restarted, they were all there again. I've been suffering with no images for a long time--I wish I would have done this sooner--it was easy!
Movable flat-screen iMac G4   Mac OS X (10.4.9)   1.25Ghz processor, 256 MB memory (DDR SDRAM)

Similar Messages

  • Safari on my account does not display images when you open a picture.

    I have Snow Leopard 10.6.8 installed. Safari on my account does not display images most of the time when you open a picture like (www.example.com/example/example.jpg or any other format). If the image does not display, I can drag from the corner, it displays the image. However, pdf does not work at all. I have to choose open in Preview to view the pdf file. I can even show the example:
    Sometimes the images work like right now.
    2. This is the time when the images do not work.

    Hi all the real problem was this...
    The issue was that the wee rubber eye piece around the viewfinder had slipped out of its seat slightly and was covering the sensor for the LCD. I Just checked the rubber eye piece bit  pushed right down till it clipped into place and now not obstructing the LCD sensor as the picture displays both with the LCD auto off enabled or disabled !! simple thing but a massive trap !

  • Upgraded to 2.0.2 and Safari does not display iphone webpages

    Hi All,
    are you having the same problem? After upgrading to 2.0.2 Safari does not display for iphone formatted webpages in the right format anymore! Any idea what to do to overcome this situation (besides waiting for the next update?)
    Best Regards
    Christoph

    I am not seeing the problem at all.
    All the iPhone specific web pages I have tried work fine.
    Try a reset.

  • Safari does not display pdf's properly...

    MacMini 2010, OS 10.6.8, Safari 5.1.10
    Safari is not displaying pdf's properly that I can see perfectly in Chrome and Firefox...I get this weird pattern of black shapes....
    Works OK on my laptop OS 10.7.5, Safari 6.1.1 (after I allow it to access Adobe Reader...)
    Any ideas? The pdfs are printed/made from MS word docs. The header is a placed image. Also attaching screen shot from FF.
    Thanks

    Try this ...
    Open a Finder window then from the menu bar click Go > Go to Folder
    Type or copy paste the following:
    /Library/Internet Plug-Ins
    Click Go.
    If you see the:  AdobePDFViewer plugin in the Internet Plug-Ins folder, move it to the trash.
    Restart your Mac and try opening a PDF file.

  • Safari does not display PDF files?

    My Safari browser does not display pdf files.  Whenever a site I'm reading links to a pdf file, a new page open in black but without content.

    Try this ...
    Open a Finder window then from the menu bar click Go > Go to Folder
    Type or copy paste the following:
    /Library/Internet Plug-Ins
    Click Go.
    If you see the:  AdobePDFViewer plugin in the Internet Plug-Ins folder, move it to the trash.
    Restart your Mac and try opening a PDF file.

  • PS CC does not display images

    I use (hope to) PS CC in combo with LR and Windows 8. When I select right click in LR and edit in PS CC, PS loads but does not display the image. If I look in PS under recently opened files, the file imported from LR shows. If I initiate the opening of the file from PS, it does not display. If I initiate the opening of any image file from CC, it does not display. What is the problem and how do I work around it??? Thank you.

    Update your video card driver from the GPU maker's website.  If you can't update the driver for some reason, then turn off the GPU features in Photoshop's preferences until you can get a working version of your video card driver.

  • The new version of Adobe Flash Player 11.5.502.110 does not display images in the flash movie.

    In the new version  of Adobe Flash Player 11.5.502.110 the images are not displayed. In previous versions they are displayed. Tested on several computers. This is not a local problem. This is a problem of Adobe. The bad news is that the early versions are very hard to find and reinstall it.
    Many different systems tested. And all browsers.
    Now there is no big image.
    Example:
    http://www.deluxedecor.ru/blog/dvorec_san_susi_letnjaja_rezidencija_fridrikha_velikogo_rok oko/2012-11-01-12
    http://www.deluxedecor.ru/index/kollekcija_lepniny_barokko_ehrmitazh/0-45
    http://www.deluxedecor.ru/index/karnizy/0-12
    and many others.....

    hi i have noticed the same problem. also with Chrome and FP ver 11.5.31.2and Firefox and Safari with FP 11.5.502.110
    it seems that MovieClipLoader class not returning onLoadInit event. I use to add a fadein function on loadInit to fade in the loaded images. with the latest Flash PLayer versions this is not activated so you cannot see the loaded images.
    I have tested this on 3 different systems and the problem is the same. I have not updated my FP for IE. There, the older FP still works well.
    test systems
    Mac OS LionSafari and FP 11.5.502.110 --- DOES NOT WORK WELL
    Windows 7 64 bit
    chrome 23.0.1271.95 with FP 11.5.31.2  - DOES NOT WORK WELL
    Firefox 16.02 with FP 11.5.502.110  - DOES NOT WORK WELL
    IE 9 with FP version 11.4.402.287  - WORKS
    Windows XP SP3
    Firefox 16.02 with FP 11.5.502.110 - DOES NOT WORK WELL
    IE 8 wth FP 11.4.402.287  - WORKS
    chrome 23.0.1271.95 with FP 11.5.31.2  - DOES NOT WORK WELL

  • My 8530 does not display images in the browser

    My bb 8530 a few weeks ago suddenly stopped displaying images in the browser. Browser options are set to "display images". I've power cycled many times, even reset and wiped, but still no images in browser. How can I fix this? Thanks.

    hi i have noticed the same problem. also with Chrome and FP ver 11.5.31.2and Firefox and Safari with FP 11.5.502.110
    it seems that MovieClipLoader class not returning onLoadInit event. I use to add a fadein function on loadInit to fade in the loaded images. with the latest Flash PLayer versions this is not activated so you cannot see the loaded images.
    I have tested this on 3 different systems and the problem is the same. I have not updated my FP for IE. There, the older FP still works well.
    test systems
    Mac OS LionSafari and FP 11.5.502.110 --- DOES NOT WORK WELL
    Windows 7 64 bit
    chrome 23.0.1271.95 with FP 11.5.31.2  - DOES NOT WORK WELL
    Firefox 16.02 with FP 11.5.502.110  - DOES NOT WORK WELL
    IE 9 with FP version 11.4.402.287  - WORKS
    Windows XP SP3
    Firefox 16.02 with FP 11.5.502.110 - DOES NOT WORK WELL
    IE 8 wth FP 11.4.402.287  - WORKS
    chrome 23.0.1271.95 with FP 11.5.31.2  - DOES NOT WORK WELL

  • Crystal Reports Image box does not display images.

    Post Author: xbhavesh
    CA Forum: .NET
    i have CR report which has a Imagebox to display images from db table. i am storing the images in a table as path. in my dev machine when i load the .aspx page with the crystal report it shows the image in the box but when i run it from the web server the image does not show.
    even from the .rpt file i get the image and all data.
    anyone know how can i get this working?
    the images are stored in a mapped network drive and the version of cr is XI R2.

    Please post to Business One forum

  • Thunderbird does not display images in messages

    I've done the recommendation for changing mailnews.message_display.disable_remote_image to "user set" "boolean" and "false" but still don't get images. I'm using Thunderbird 24.3.0, and use Firefox 28.0 as my default browser. I can't find anything else in help or options or tools that addresses this. This happened recently, I used to always either get the images or the choice box for downloading remote images, but don't get that anymore either. Should I download and re-install Thunderbird? If so, how do I ensure that my saved messages and address book is saved intact?
    Thank you,
    Jerry Larsen
    [email protected]

    hi i have noticed the same problem. also with Chrome and FP ver 11.5.31.2and Firefox and Safari with FP 11.5.502.110
    it seems that MovieClipLoader class not returning onLoadInit event. I use to add a fadein function on loadInit to fade in the loaded images. with the latest Flash PLayer versions this is not activated so you cannot see the loaded images.
    I have tested this on 3 different systems and the problem is the same. I have not updated my FP for IE. There, the older FP still works well.
    test systems
    Mac OS LionSafari and FP 11.5.502.110 --- DOES NOT WORK WELL
    Windows 7 64 bit
    chrome 23.0.1271.95 with FP 11.5.31.2  - DOES NOT WORK WELL
    Firefox 16.02 with FP 11.5.502.110  - DOES NOT WORK WELL
    IE 9 with FP version 11.4.402.287  - WORKS
    Windows XP SP3
    Firefox 16.02 with FP 11.5.502.110 - DOES NOT WORK WELL
    IE 8 wth FP 11.4.402.287  - WORKS
    chrome 23.0.1271.95 with FP 11.5.31.2  - DOES NOT WORK WELL

  • Does not display image

    I am using the vision software, Labview 2011 windows XP with a USB wbcam. I use the WebCam to test the software, create an installation file, and run it on a different machine. This machine has an IEEE 1394 Basler camera.
    The program seems to work without any problem with the run-time system. On the USB system, the image never displays properly if I have a property node to read information from the camera. If I remove it, it works just like the IEEE 1394 camera.
    The enclosed VI seems to demonstrate the problem. If you run it as is, it will not display the image. If you stop the program and set the property node to false, it will display the image properly.
    Solved!
    Go to Solution.
    Attachments:
    Bare_Design.vi ‏45 KB

    The USB webcam seems to update the VideoMode to value of 4 (0 before). FrameInterval stays 0.
    No errors appear during the run. When you terminate, the following errors appears.
    The firewire camera, Bassler does not have the problem. It is the USB webcam that has this issue.
    Attachments:
    Bard_Design.jpg ‏15 KB

  • Safari does not display text on some sites.

    I am running OSX 10.10.2 and Safari 8.03
    Some sites I visit do not display text at all.
    For example: This site (http://neflin.org/) looks fine in Chrome, Firefox, whatever. But in Safari, it has no text at all. See below.
    Mail is having difficult with some text in html email too.
    I have rebooted, reset the PRAM, deleted preferences and turned off extensions. I checked the Guest account and created a new account and in all cases the problem persists.
    I have validated fonts in Font Book, restored standard fonts and looked for duplicates. Nothing.
    Flash and Java are up to date.
    Any thoughts?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

  • SAFARI DOES NOT DISPLAY PDF DOCS.

    Does anyone know why my Safari browser suddenly does not show PDF docs in the browser window? It used to. I use Version 2.04. A message does appear that says "plug-in cancelled". I don't know why.
    Acrobat opens it in Firefox fine, but nothing happens in Safari. I prefer Safari for viewing PDFs online because it is more convenient than having Acrobat start up and drop files on my hard drive. Any help would be greatly appreciated. Thanks very much.
    Mike

    Hi,
    I prefer Safari for viewing PDFs online because it is more convenient than having Acrobat start up and drop files on my hard drive. Any help would be greatly appreciated. Thanks very much.
    Hmm yes i can relate much better then launching adobe, for my needs.
    Go to System preferences-> Quick time preferences->Advanced tab
    see the -> MIME settings, click the button,
    Images: click to expand the list, make sure PDF is not selected.
    Let me know if this helps any?
    Eme '~[)

  • Oracle Enterprise Manager does not displaying images

    Hi folks, I installed Oracle SOA Suite 10.1.3.0 and after that I did apllied patch 10.1.3.4. The patch was applied successfully, but when I invoke Enterprise Manager all images does not rendered. After analisying I could see that "ascontrol" application has two virtual-path pointing two real-path but it does not exists into file system. Enterprise MAnager console does not load CSS file and images because it.
    I download OC4J 10.1.3.4 standalone version and after configuration I access Enterprise Manager via browser, but OC4J standalone works fine.
    Anyone can help me ???
    Cheers.

    The listener port may be misconfigured,
    You can reconfigure with
    emca -config dbcontrol db
    Enter the following information:
    Database SID: XXX
    Database Control is already configured for the database XXX
    You have chosen to configure Database Control for managing the database XXX
    This will remove the existing configuration and the default settings and perform a fresh configuration
    Do you wish to continue? [yes(Y)/no(N)]: Y
    Listener port number: 1521
    Password for SYS user:
    Password for DBSNMP user:
    Password for SYSMAN user:
    Email address for notifications (optional):
    Outgoing Mail (SMTP) server for notifications (optional):
    You have specified the following settings
    Database ORACLE_HOME ................ /oracle/product/10.2.0
    Database hostname ................ xxxxx
    Listener port number ................ 1521
    Database SID ................ XXX
    Email address for notifications ...............
    Outgoing Mail (SMTP) server for notifications ...............
    Do you wish to continue? [yes(Y)/no(N)]: y
    24.08.2008 01:58:44 oracle.sysman.emcp.EMConfig perform
    INFO: This operation is being logged at /oracle/product/10.2.0/cfgtoollogs/emca/EPA/emca_2008-08-24_01-58-01-AM.log.
    24.08.2008 01:58:46 oracle.sysman.emcp.util.DBControlUtil stopOMS
    INFO: Stopping Database Control (this may take a while) ...
    24.08.2008 01:58:57 oracle.sysman.emcp.util.DBControlUtil startOMS
    INFO: Starting Database Control (this may take a while) ...
    24.08.2008 02:00:39 oracle.sysman.emcp.EMDBPostConfig performConfiguration
    INFO: Database Control started successfully
    24.08.2008 02:00:39 oracle.sysman.emcp.EMDBPostConfig performConfiguration
    INFO: >>>>>>>>>>> The Database Control URL is http://xxxxx:1158/em <<<<<<<<<<<
    Enterprise Manager configuration completed successfully
    FINISHED EMCA at 24.08.2008 02:00:39

  • Movieclips loader loads png but does not display image in ie

    hello, i have created a static class to deal with the loading
    of images, it works great. yesterday, i found an issue: i try to
    load png files (those pngs are generated with quasimondo's bitmap
    exporter), they do load, but they are not displayed in ie.
    it worked until recently. is there some specification about
    the png that i have to make sure that the png has? or is there an
    issue using the movieclip loader with ie?
    i included the actionscript class (save the code in an .as
    file), so if you want to test, write only this in the first frame
    of your code:
    import com.iCongo.utils.MovieClips;
    this.createEmptyMovieClip ("placeholder",
    this.getNextHighestDepth ());
    MovieClips.loadIMG (this.placeholder, "
    http://somedomain.com/somepng.png");
    that image will load, but in the context of my flash file
    where many many files are loaded at the same time, only the block
    generated by the bitmap exporter will not show.

    OOPS
    cancel that question. i ftp'd the file to the server again, this time setting the transfer type to binary and the png image comes up
    just like it should.
    john

Maybe you are looking for

  • How do I get my Calendar in List view?

    I'm trying to get my calendar back to list view - I did it before but not sure how? I'm using iOS 7.1 - can someone help?

  • Yoga 2 Pro: downgrade to windows 7 ultimate

    Hi there, I recently purchased a Lenovo Yoga 2 pro laptop. (http://www.elgiganten.dk/product/pc-tablets/barbar-computer/LE59386592/lenovo-yoga-2-pro-13-3-multim... Since I'm not that excited for Windows 8, I decided to install Windows 7 ultimate. I f

  • Unexplained server re-starts

    One of my clients has OSX Server (10.4.3) running on a Dual G5 with 2.5Gb RAM. He experiences unexplained re-starts. Sometimes these occur during the night when no-one is logged in and sometimes during the day with users logged-in. When the problem o

  • Giving a phone to another family member who is also a verizon customer

    When  you give a family member your old phone and they activate it under their number does it it wipe out all your contact info, photos, and messages?

  • Time Capsule - can you recover deleted files?

    I've been using my time capsule as a external hard drive to store some files, I have recently purchased a mirrored external hard drive to store them on, and in the transfer some of the files that were stored on the Time Capsule have gotten deleted, p