Safari not able to access internet through wifi after updating iphone 3gs with ios6

i have updated my iphone 3GS with ios 6 and initially my wifi worked fine but for some strange reason it stopped connecting to internet even though its connected to my home wifi i have and tried and failed with all the possible solutions given in this forum i am able to use safari with my cellular data network but with wifi its not working please provide me with a solution

well, first check whether you're connected to the blackberry network...
how can I check whether myself connected to blackberry?
Check within the network bars on the phone whether it is showing you 3G, EDGE or GPRS in capital letters...!!
If not give a hard-reset to the phone (remove the battery put it back once)...
And if it shows in caps letters then try requesting for services again... how? on the phone desktop > within the search bar > type "Host Routing Table".... search results shows you as "options"... select that & select host routing table... afterwards, hit the blackberry menu button > select register...
.RoCkInG dUdE.
Trust Your Technolust | Do not PM for any support
If a solution received, please hit on to show your support.

Similar Messages

I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.

I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.

varunsharmaapplefan
http://support.apple.com/kb/ht5209 might help you. An iPhone 4 can airplay content from apps that support airplay and iTunes but it cannot mirror. If your game does not have airplay in the app you cannot mirror it to the apple TV so I don't know if you can play just the music. You should have no problem playing your iTunes over airplay though.
This may also help http://support.apple.com/kb/HT4437
Regards
Jules

I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?

I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?

SMS. Deggie, had them check that. After a lengthy discussion with Senior Tech advisor, it appears it is iMessage/Face Time server (they are the same) issue, which will strong arm those into purchasing Data if they use iMessage over multiple devices, as the server registers the phone number associated with apple ID. Not impressed. I put what I've learned here in a simliar thread
https://discussions.apple.com/message/17416082#17416082
and this is what I've put in apple.com/feedback
"iMessage requires internet. SMS does not. iMessage/FaceTime auto logs phone numbers to the iMessage/Facetime server (it's the same server as I've come to learn), this means that when iMessage/Face Time is turned on anyone sending a message through the server to me will only be sent as an iMessage- not when I'm not connected to internet, meaning I will not receive the message as an SMS by default, when I have another device using iMessage (such as MacBook) logged in.
This feature is a problem for me, bottom line, in that iMessage strong arms the consumer (me) into having to buy a data plan that they either do not want, or do not need."

HT1695 My Wifi is connected however im not able to access internet nor email any help

My Wifi is connected however im not able to access internet nor email any help

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

My MacBook pro will not connect to the Internet through wifi yet all other devices do

My MacBook pro will not connect to the Internet through wifi. I have several other wifi enabled devices and they are all connected to the Internet just fine... What could/would cause this?

Disable your AirPort and enable in a second. Or check, maybe you need to type in correct digits in; Settings/Network/Advanced/Configure...

I'm not able to access my photos album on my iPhone 4

I'm not able to access my photos album on my iPhone 4. Every time I touch the app it closes the app and takes me back to the home screen. Same happens when I try to take a picture, right when I click to take a picture, sends me to the home. Please help

Known bug. Quit the Camera App, double-tap the home key and delete Camera from the recent apps bar. Fire it up again, should be good.

Not able to access DB on VM after getting Reserved IP

Hi,
I have Reserved an Public Virtual IP for my VM 23.102.xxx.xxx The OS WIN server 2012 R2 and and has SQL server 2012 running on it.
Problem:
1. I'm not able to access the DB or connect to the server form outside( from my local machine). I was able to connect when the Public Virtual IP wasn't reserved.
2. As my website is hosted on the same VM, I use the Internal IP address as the Binding IP address, however I recently noticed that the Internal IP address has changed and my website was down.
3. How do I prevent the Internal IP address from changing. So that I don't have to reset my webconfig and binding IP address frequently?

Hi,
Thanks for your question.
1. How did you connect to the VM? I recommend you to use DNS name of the cloud service(xxx.cloudapp.net) with the public port for RDP to connect to see if the issue persists.
2. In general, if you shut down an Azure VM to stopped (deallocated) status, the resources for the VM will be released and the internal IP address may be changed.
3. You can assign a static internal IP address to an existing VM if it is in a virtual network. For more detailed information, please refer to the link below:
Configure a Static Internal IP Address for a VM
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

My iPad-2 is getting connected to Wi-Fi(full signal strength),but its not able to access internet.I tried few solutions from this forum,but nothing worked out.I am in India and i am in need of a remedy to it.

Plz someone help me.

It's rather difficult to give you advice since you do not say what you have tried or anything about your networking equipment but your underlying problem may be that you are not really be properly connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet. Other devices on your network may still have a proper IP address and continue to function.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

Am not able to back up through WiFi

Hello apples..
My iPhone was automatically backin up once connected to Wifi, plugged in, and locked. today i checked the last back up done it was 27/3. i tried to back up manually but it keeps sayin (backing up.... estimating time remaining) and keeps like that for ever. i connected my iPhone to iTunes and backed up from there (To iCloud and not to my computer) it worked fine and showed the last back up 5 minutes ago. so i can back up to iCloud throug iTunes and not through WiFi.
Any suggestions ...

Hi shahnawaz56,
If you are having issues backing up your iPad in iTunes, you may find the troubleshooting steps in the following article helpful:
iOS: If you can't back up or restore from a backup in iTunes
http://support.apple.com/kb/ts2529
Regards,
- Brenden

Cannot access internet through itunes after last itunes update. Cannot get to itunes store or itunes help. Everything else works fine.

After last itunes update I cannot get to the internet through itunes. Cannot get to itunes store, itunes help, etc. Also, now when I sync everything syncs properly but I get message at end that tells me that my phone cannot be backed up on the laptop.

Something may be corrupt in your iTunes installation. The backup problem may or may not be related. The first step is reboot your system, disable your antivirus and firewall and try again. The next thing to try is completely removing iTunes and reinstalling: http://support.apple.com/kb/HT1925.
Also, if you used TinyUmbrella or Recboot as unauthorized apps to help with the update they corrupted your network settings on your computer. You will have to edit your hosts file and remove all references to Apple servers.

Safari not able to access myspace

Hi. I'm running OSX 10.4.11 and Safari v4.1.2 on a G5. I am having all kinds of problems trying to access myspace. Sometimes I get the message saying Safari cannot connect to myspace.com and then I'll try again later and everything will be fine. And a bit later I will not be able to connect again. There seems to be no rhyme or reason to this behavior. Often when I try to log in to myspace I will get a message saying that Safari cannot connect to the server (forget the name). And then the next day I can. Sometimes when I am able to log in to my myspace page some of the modules are blank and sometimes they're fine. Sometimes I'm automatically directed to another user's profile (the same user but it may not be a bonafile profile). I am not having problems w/ any other sites, only myspace. Firefox seems to be much more dependable for the most part but even it too is sometimes a little quirky but only w/ myspace. Here's something really weird that happened. You know the Apple - Mac OS X icon on the dock that normally opens to a page displaying info about the latest version of OS X? One time recently it opened to a weird combination of a myspace profile and info about Mac OS X as if Mac OS X was a person. Wish I'd taken a screen shot. Anyone have any idea why this might be happening?

+Also, login to another account on your Mac. See if you can login to MySpace there. If not, it's a system wide problem, not just your user account.+
+You may want to check your startup disk for errors just in case. Follow the instructions here.+
+http://support.apple.com/kb/TS1417+
+Scroll down to where you see: Try Disk Utility.+
Thanks for the apple link. Tried a safe boot and things seem to be better. I had tried logging in w/ another user account and that seemed to be better also, but not always. Just as using a different browser seemed to work better but not always. I also reset my router which seemed to have bettered Safari's performance w/ myspace somewhat. It's an intermittent problem and just seems to pop up w/o rhyme or reason. For the most part myspace loads fine now but sometimes certain elements on the page will not display or sometimes "pages cannot be found" and I'm redirected elsewhere. And then the next day everything will be fine (or almost fine).

Not able to access Internet or Internal network via SSL AnyConnect

After connecting succesfully with Cisco AnyConnect version 3.0.05152 I am unable to access internal resources. Below is the configuration of the ASA.
Any input on the below would be appreciated
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.02.04 16:15:58 =~=~=~=~=~=~=~=~=~=~=~=
sh run
: Saved
ASA Version 9.1(4)
hostname ASA
domain-name hb.local
enable password pEuUQweb2zEldXkE encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd pEuUQweb2zEldXkE encrypted
names
ip local pool Remote_VPN_DHCP_Pool 172.16.253.100-172.16.253.150 mask 255.255.255.0
interface Ethernet0/0
description *** Internet ***
nameif publicWAN
security-level 0
ip address X.X.X.X X.X.X.X.
interface Ethernet0/1
description *** Guest Wireless Network ***
nameif guest
security-level 50
ip address 10.0.254.1 255.255.255.0
interface Ethernet0/2
description *** Uplink to Branches ***
nameif Branches
security-level 100
ip address 192.168.254.1 255.255.255.0
interface Ethernet0/3
description *** Uplink to JHA ***
nameif JHA
security-level 0
ip address 10.0.8.1 255.255.255.0
interface Management0/0
description *** Managemnet Interface - NOT USED ***
management-only
shutdown
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
boot system disk0:/asa914-k8.bin
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
dns domain-lookup publicWAN
dns domain-lookup guest
dns domain-lookup Branches
dns domain-lookup JHA
dns server-group DefaultDNS
name-server 172.16.1.2
domain-name hb.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network obj-10.0.0.0
subnet 10.0.0.0 255.255.255.0
object network obj_guest
subnet 10.0.254.0 255.255.255.0
object network obj-172.16.1.0
subnet 172.16.1.0 255.255.255.0
object network obj-172.16.1.5
host 172.16.1.5
object network obj-172.16.1.5-01
host 172.16.1.5
access-list Branches extended permit icmp any4 any4
access-list Branches extended permit ip any4 any4
access-list JHA extended permit ip any4 any4
access-list JHA extended permit icmp any4 any4
access-list guest extended deny ip any4 10.0.1.0 255.255.255.0
access-list guest extended deny ip any4 10.0.2.0 255.255.255.0
access-list guest extended deny ip any4 10.0.3.0 255.255.255.0
access-list guest extended deny ip any4 10.0.4.0 255.255.255.0
access-list guest extended deny ip any4 10.0.5.0 255.255.255.0
access-list guest extended deny ip any4 10.0.6.0 255.255.255.0
access-list guest extended deny ip any4 10.0.7.0 255.255.255.0
access-list guest extended deny ip any4 10.0.8.0 255.255.255.0
access-list guest extended deny ip any4 10.0.9.0 255.255.255.0
access-list guest extended deny ip any4 10.0.10.0 255.255.255.0
access-list guest extended deny ip any4 172.16.0.0 255.255.0.0
access-list guest extended permit ip any4 any4
access-list guest extended permit icmp any4 any4
access-list traffic_send_ips_module extended permit ip any4 any4
access-list outside extended permit tcp any4 host 172.16.1.5 eq https
access-list outside extended permit tcp X.X.X.X 255.255.255.0 host 172.16.1.5 eq smtp
access-list outside extended permit tcp X.X.X.X. 255.255.255.0 host 172.16.1.5 eq smtp
access-list outside extended deny ip any4 any4 log interval 30
pager lines 50
logging enable
logging timestamp
logging monitor warnings
logging buffered informational
logging trap warnings
logging asdm informational
logging queue 2048
logging device-id hostname
logging host Branches 172.16.1.80
flow-export destination Branches 172.16.1.80 2055
flow-export template timeout-rate 15
mtu publicWAN 1500
mtu guest 1500
mtu Branches 1500
mtu JHA 1500
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp deny any publicWAN
asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (any,publicWAN) dynamic interface
object network obj-10.0.0.0
nat (Branches,JHA) static 10.0.0.0
object network obj_guest
nat (guest,publicWAN) dynamic interface
object network obj-172.16.1.0
nat (Branches,JHA) static 172.16.1.0
object network obj-172.16.1.5
nat (Branches,publicWAN) static interface service tcp smtp smtp
object network obj-172.16.1.5-01
nat (Branches,publicWAN) static interface service tcp https https
access-group outside in interface publicWAN
access-group guest in interface guest
access-group Branches in interface Branches
access-group JHA in interface JHA
route publicWAN 0.0.0.0 0.0.0.0 X.X.X.X. 1
route Branches 10.0.0.0 255.255.0.0 192.168.254.2 1
route Branches 10.0.5.0 255.255.255.0 192.168.254.2 1
route Branches 10.28.11.0 255.255.255.0 192.168.254.2 1
route Branches 10.55.4.0 255.255.255.0 192.168.254.2 1
route Branches 10.55.6.0 255.255.255.0 192.168.254.2 1
route Branches 10.57.4.0 255.255.255.0 192.168.254.2 1
route Branches 10.57.6.0 255.255.255.0 192.168.254.2 1
route Branches 10.71.4.0 255.255.255.0 192.168.254.2 1
route Branches 10.71.6.0 255.255.255.0 192.168.254.2 1
route JHA 10.150.0.0 255.255.0.0 10.0.8.254 1
route JHA 10.251.4.0 255.255.255.0 10.0.8.254 1
route Branches 172.16.0.0 255.255.0.0 192.168.254.2 1
route Branches 172.28.0.0 255.255.0.0 192.168.254.2 1
route Branches 172.28.250.0 255.255.255.0 192.168.254.2 1
route Branches 192.9.200.0 255.255.255.0 192.168.254.2 1
route Branches 192.9.201.0 255.255.255.0 192.168.254.2 1
route Branches 192.9.220.0 255.255.255.0 192.168.254.2 1
route Branches 200.0.0.0 255.255.0.0 192.168.254.2 1
route Branches 200.0.11.0 255.255.255.0 192.168.254.2 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
webvpn
always-on-vpn profile-setting
aaa-server HB_LDAP_Group protocol ldap
aaa-server HB_LDAP_Group (Branches) host 172.16.1.2
server-port 636
ldap-base-dn CN=VPN LDAP,OU=HB Users,DC=hb,DC=local
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn VPN LDAP
ldap-over-ssl enable
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.0.0.0 255.255.0.0 Branches
http 172.16.0.0 255.255.0.0 Branches
snmp-server host Branches 172.16.1.80 community *****
snmp-server location Seagoville
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
snmp-server enable traps syslog
snmp-server enable traps ipsec start stop
snmp-server enable traps entity config-change fru-insert fru-remove
snmp-server enable traps remote-access session-threshold-exceeded
sysopt connection timewait
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh scopy enable
ssh 0.0.0.0 0.0.0.0 publicWAN
ssh 10.0.0.0 255.255.0.0 Branches
ssh 172.16.0.0 255.255.0.0 Branches
ssh 192.168.1.0 255.255.255.0 management
ssh timeout 5
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd domain hb.local
dhcpd address 10.0.254.100-10.0.254.200 guest
dhcpd dns 12.127.17.72 12.127.17.73 interface guest
dhcpd enable guest
threat-detection rate acl-drop rate-interval 600 average-rate 5 burst-rate 10
threat-detection rate acl-drop rate-interval 3600 average-rate 320 burst-rate 640
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 129.6.15.28 source publicWAN
webvpn
port 4443
enable publicWAN
enable Branches
anyconnect image disk0:/anyconnect-win-3.1.05152-k9.pkg 1
anyconnect image disk0:/anyconnect-macosx-i386-3.1.05152-k9.pkg 2
anyconnect enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
wins-server none
dns-server value 172.16.1.2
vpn-tunnel-protocol ikev2 ssl-client
default-domain value hb.local
split-tunnel-all-dns enable
username HBAdmin password azFWMwV/tQh/YjoW encrypted
tunnel-group Remote_VPN_Users type remote-access
tunnel-group Remote_VPN_Users general-attributes
address-pool Remote_VPN_DHCP_Pool
authentication-server-group HB_LDAP_Group LOCAL
default-group-policy GroupPolicy1
dhcp-server 172.16.1.2
tunnel-group Remote_VPN_Users webvpn-attributes
group-alias RemoteVPNUsers enable
class-map inspection_default
match default-inspection-traffic
class-map ips_module_class_map
match access-list traffic_send_ips_module
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect http
inspect icmp
inspect ip-options
class ips_module_class_map
ips inline fail-open
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:1c38a95ce10dab97ac6ad2e99823f5a2
: end
ASA# exit
Logoff

Looks like you are missing the nonat statement. Try adding the following and test (adjust the source subnet to match your needs)
object network VPN_range
range 172.16.253.100 172.16.253
nat (Branches,publicWAN) source static obj-10.0.0.0 obj-10.0.0.0 destination static VPN_range VPN_range
Please remember to rate and select a correct answer

How can I save adobe reader file from gmail into my adobe reader app?? i would like to open one file in place where I'm not able to access internet and for that reason i would like to save it. is that even possible?

How can i save adobe reader file from my gmail into my adobe reader application. or is there any other way i can save it into my phone so I'm able to open in any situation not just from my gmail???

Long hold on the document in mail and it should give you the open in... option, select adobe reader and the file is now saved locally for viewing even while offline.

Not able to access ports through firewall

I'm setting up our new server, and we want to run a Quark license server through port 1028.
In the Server Admin, under Firewall->Services->Settings, I set up a service for the license server on port 1028 using TCP and UDP protocols. It's allowed for any traffic.
under Firewall->Advanced->, I set up a rule to:
Allow all Quark services
Source: any port 1028
Destitnation: any port 1028 interface IN
when I scan the open ports onthe server, I don't get a reponse from this port, or any ports. I've tried turning the firewall off completely, and it still doesn't show in the port scan.
The only major change we're made to this server is that we're running bonded Ethernet on the 2 ports. Could this be stopping the ports from getting through?
I've checked with IT, and they've (supposedly) verified that there aren't any blocked ports on our switch. The old license server runs fine on port 1028, and it's on the same switch.
Mac OS X (10.4.7)

You are running a firewall on a non public server?
Usually source and destination are not the using the same port number.
Source is usually chosen from a range of high port numbers.
Nevertheless if the QLA server isn't running on the server you woun't get an indication when portscanning the server (try portscanning on the server and use either localhost/127.0.0.1 or the "real" bonded interface IP).
To my knowledge a switch can't block portnumbers but for a bonded interface the switch needs LACP capability for the trunk. There could also be different VLANs and routing.

Windows laptop not able to access internet thru apple express network

I run macs all day long but was given a windows machine. I am trying to hook up on the net via a dsl apple network my brother has. I connect to his network but cannot get on the net. I have tried other(motel) wireless networks and they all work. He has had only 4 windows machines say they cannot connect. I am one of them. Have tried numerous settings but still no go. help anyone?
(should have just bought a powerbook!)
G4 desktop Mac OS X (10.3.9) Windows laptop

I am able to connect to his network.
Do you get a valid IP address?
If it is 169.x.x.x or similar then you have failed to authenticate.
What is happening is your PC can see the network, but is in fact not connected.
he is using a
wep password.
One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
Though sometimes not even that works and the HEX key must be used regardless.
AirPort: Joining an encrypted wireless network
http://docs.info.apple.com/article.html?artnum=106424
Choosing a password for networks that use Wired Equivalent Privacy (WEP)
http://docs.info.apple.com/article.html?artnum=108058
Did you look at the guides I linked to in my other post in this thread?
I just cannot go on to the net. no
email or browser.
If you do have a valid IP address then in a browser try
http://17.254.0.91
and report back.
iFelix

Safari not able to access internet through wifi after updating iphone 3gs with ios6

Similar Messages

Maybe you are looking for