Safari not showing all the images in my Facebook feed

In the category of “small and annoying problems"…
For the past while (since Mavericks?) I’ve noticed a tendency for the images not to load in Facebook. Not all, just some. and they do come back if I hit refresh…but it is unusual in performance. This, I freely admit, could be a Facebook problem. But I was curious if anyone else out there was having the same problem…
><({(º>

iTunes is indeed using the second feed you list but this immediately redirects to the first feed when you enter the URL in a browser. Presumably you have a redirect in place on the server? There are 115 episodes in the Store, and though I didn't count the ones in the feed they seem to match. So it all seems to be working and you could probably just leave it alone - since you have added episodes to the feed and iTunes has (presumably) picked then all up, the redirect seems to be working there OK. (Next time you add an episode to the feed, make sure it does indeed appear in the Store - after a couple of days - and when subscribing - this latter is immediate).
If you really want to change iTunes to the feed directly you are going to have to go through a bit of a process:
1. Copy the feed at http://construct.wickedbad.net/feed/podcast to the other location at
http://construct.wickedbad.net/archives/category/mixes/jaime-le-dubstep/feed
2. Add the redirect tag to this copy feed as indicated here:
http://www.apple.com/itunes/podcasts/specs.html#changing
3. Remove the server redirect.
4. Leave the copy feed in place until iTunes has swapped over (check this by subscribing from the Store page, clicking the line for your podcast (not an episode) and clicking the 'i' button at the right-hand end.

Similar Messages

  • The library module in 4.3 version does not show all the images

    The library module in the version 4.3 of Lightroom does not show all the images. They are marked with gray boxes instead of images. This is especially true of the images which I tried to import to Lightroom since I downloaded 4.3 a few weeks ago. If I want to seen an image, I have to go to the develop module to see it. What should I do?  Get this fixed now!!!!!!!!

    My bet would be on a corrupt preview folder.
    Your preview folder is located in the same folder as your catalog. It has the same name as your catalog with the word Previews.LRDATA at the end of the name. Rename this folder and let Lightroom rebuild the previews. Go to Library>Previews>Render Standard-sized Previews.  See if that fixes it.
    If it doesn't, you may want to have a look here: http://helpx.adobe.com/lightroom/kb/photos-appear-black-gray-rectangles.html

  • I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address.  How can I re-gain access to those hundreds of purchased songs?

    I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address.  How can I re-gain access to those hundreds of purchased songs?

    You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
    Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

  • BI publisher report is not showing all the data

    Hi All,
    I have created a report using BI Publisher in R12. The report is not showing all the records.
    I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
    what might be the issue.please give me some idea to resolve this issue.
    Thanks in advance.
    Regards,
    P.Kalidoss

    Hi Arun,
    In the following code: public SelectItem[] getAllPrinters() {
    if (allPrinters == null) {           // allPrinters is not defined. what type of object it is
    PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
    allPrinters = new SelectItem[printers.length];
    for (int i = 0; i < printers.length; i++) {
    SelectItem printer =
    new SelectItem(printers.getName(), printers[i].getName());
    allPrinters[i] = printer;
    return allPrinters;;;
    Variable allPrinters is not defined. what type of object it is?
    And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
    value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
    id="soc1"
    autoSubmit="true">
    <f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
    </af:selectOneChoice>.
    Thanks.

  • In solution manager system not showing all the system in SLD

    Dear Gurus,
    During the installation of solution manger sysyem i selected as a Central SLD as solution manager
    Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
    If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
    It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
    But if i login into solution manger not  able to see all the system in SLD.
    Regards

    Thanks for reply
    it is not showing all the systems

  • ALV not showing all the rows! Please help!

    Hi Experts,
         I have webdynpro ALV report and I am using SALV_WD_TABLE as the reusable component. In component controller's WDDOINIT I have written the code for pulling teh data from R/3 table and binding it to ALV table.
    In the view's WDDOMODIFYVIEW event I have written the following code to get subtotal and grand total of Qty column based on product column.
          I have coded like this:
          lr_field_settings ?= l_value.
    lr_field = lr_field_settings->get_field( 'PRODUCT' ).
    lr_field->if_salv_wd_sort~set_group_aggregation_allowed( ABAP_TRUE ).
    lr_field->if_salv_wd_sort~create_sort_rule( ).
    l_sortrule = lr_field->if_salv_wd_sort~GET_SORT_RULE(  ).
    l_sortrule->set_sort_order( if_salv_wd_c_sort=>sort_order_ascending ).
    l_sortrule->set_group_aggregation( ABAP_TRUE ).
    *...Aggregate Field PRODUCT
    lr_field = lr_field_settings->get_field( 'QTY' ).
    lr_field->if_salv_wd_aggr~create_aggr_rule( ).
    lr_aggr_rule = lr_field->if_salv_wd_aggr~get_aggr_rule(  ).
    lr_aggr_rule->set_aggregation_type( if_salv_wd_c_aggregation=>aggrtype_total ).
    It is working now but my ALV table is not showing all the rows. I have 6 products and it is showing from product 2. But it is calculating grand total and subtotal correctly. I am not able to see the first product row and subtotal for that. Even if I click on the ^ icon in the ALV table below it is not showing all the rows.
    What could be the problem?
    Please help
    Thanks
    Gopal

    did you somehow manage to set the "first visible row" property on table object
    to 2.   Only thing I can think of that could cause this effect.
    Cheers
    Phil

  • Service monitoring is not showing all the services when i create a service monitor under Management pack templates.

    Hi All,
    I am using SCOM 2007 R2 CU4 in my environment. I want to do a service monitoring on specific agents. When i try creating this service monitor which comes under the Management pack template  when i select the service which i want to monitor it does not
    show all the services in the drop down.
    For example - I have Windows audio service which is present on the machine, But it is not showing in the service list. 
    So from the services stating from "W" i see only 5 in SCOM and in services.msc in the Agent i see more than 5.
    Below is the screen shot.
    Can any one please help.
    Gautam.75801

    Hi Yan Li,
    So based on your above suggestion, If the services are already managed  / monitored by a specific
    management pack those services will not appear here in the Wizard while creating this type of a Management pack object alert right ?
    If that is the case why does not the same reflect here in the operations console in the Services monitor
    TAB ?
    Gautam.75801

  • Apple mail not showing all the messages?

    In Apple mail, for my icloud account, I have some mailboxes which show the wrong number of messages, it shows too few.
    As an example, a mailbox contains 150 messages, but apple mail reports there are only 146.
    I rebuilt the mailbox and let apple mail do its thing. In the activity window I can see there are 150 messages. Yet, once apple mail has finished rebuilding the mailbox, it still tells me there are 146 messages. What's going wrong? Why would apple mail not show all the messages while in the activity window it clearly shows it knows there are 150?

    Solved!
    This was too weird to be real. Apple mail does not show messages it believes to be duplicates, and buy, does it make big mistakes in deciding what are duplicate messages and what not! Some of my mailboxes had over 100 "duplicates" not showing according to apple mail.
    I found a solution thanks to this topic:
    https://discussions.apple.com/message/18265121#18265121
    defaults delete com.apple.mail AlwaysShowDuplicates
    does yield an error in 10.8.2 ( Domain (com.apple.mail) not found. Defaults have not been changed. )
    defaults write com.apple.mail AlwaysShowDuplicates -bool true
    Does work brilliantly though!

  • Vertical scrollbar not showing all the records when I scroll down.

    Vertical scrollbar not showing all the records when I scroll down.
    Using Oracle forms 10g , operating system windows
    I have two fields with number of items dispayed = 15.
    I have a vertical scroll bar with them. There are 34 records in the table but the scrollbar only shows 15 records.
    Here are the properties for block / scrollbar.
    WORK_CATEGORY
    - Subclass Information                           
    - Comments                                       
    * Navigation Style                                Same Record
    - Previous Navigation Data Block                 
    - Next Navigation Data Block                     
    - Current Record Visual Attribute Group          
    - Query Array Size                                0
    - Number of Records Buffered                      0
    * Number of Records Displayed                     60
    * Query All Records                               No
    - Record Orientation                              Vertical
    * Single Record                                   No
    - Database Data Block                             Yes
    - Enforce Primary Key                             No
    - Query Allowed                                   Yes
    - Query Data Source Type                          Table
    * Query Data Source Name                          WORK_CATEGORY
    * Query Data Source Columns                      
    * Column Name                                   JOB_TYPE
    * Column Type                                   VARCHAR2
    - Column Type Name                             
    - Parent Column                                
    * Length                                        30
    * Precision                                     0
    * Scale                                         0
    * Mandatory                                     Yes
    * Column Name                                   WORK_CATEGORY
    * Column Type                                   VARCHAR2
    - Column Type Name                             
    - Parent Column                                
    * Length                                        30
    * Precision                                     0
    * Scale                                         0
    * Mandatory                                     Yes
    - Query Data Source Arguments                    
    - Alias                                          
    - Include REF Item                                No
    * WHERE Clause                                   
    * ORDER BY Clause                                 job_type
    - Optimizer Hint                                 
    - Insert Allowed                                  Yes
    - Update Allowed                                  Yes
    - Locking Mode                                    Automatic
    - Delete Allowed                                  Yes
    - Key Mode                                        Automatic
    - Update Changed Columns Only                     No
    - Enforce Column Security                         No
    - Maximum Query Time                              0
    * Maximum Records Fetched                         0
    - DML Data Target Type                            Table
    - DML Data Target Name                           
    - Insert Procedure Name                          
    - Insert Procedure Result Set Columns            
    - Insert Procedure Arguments                     
    - Update Procedure Name                          
    - Update Procedure Result Set Columns            
    - Update Procedure Arguments                     
       Don't know where am I going wrong. I'll really appreciate if you can help me in this.
    Thanks.
    Edited by: 831050 on Sep 14, 2011 8:05 AM

    One of the items is a list item.. here are it's properties:
    * Name                                          JOB_TYPE
    * Item Type                                     List Item
    - Subclass Information                         
    - Comments                                     
    - Help Book Topic                              
    - Enabled                                       Yes
    * Elements in List                             
    * Label                                      
    * List Item Value                             LIST20
    * List Style                                    Combo Box
    - Mapping of Other Values                      
    - Implementation Class                         
    - Case Restriction                              Mixed
    - Popup Menu                                   
    - Keyboard Navigable                            Yes
    - Mouse Navigate                                Yes
    - Previous Navigation Item                     
    - Next Navigation Item                         
    - Data Type                                     Char
    - Data Length Semantics                         Null
    - Maximum Length                                30
    - Initial Value                                
    * Required                                      Yes
    * Copy Value from Item                         
    - Synchronize with Item                        
    - Calculation Mode                              None
    - Formula                                      
    - Summary Function                              None
    - Summarized Block                             
    - Summarized Item                              
    - Current Record Visual Attribute Group        
    - Distance Between Records                      0
    * Number of Items Displayed                     15
    - Database Item                                 Yes
    * Column Name                                   JOB_TYPE
    - Primary Key                                   No
    - Query Only                                    No
    - Query Allowed                                 Yes
    - Insert Allowed                                Yes
    - Update Allowed                                Yes
    - Update Only if NULL                           No
    - Visible                                       Yes
    * Canvas                                        CANVAS2
    - Tab Page                                     
    * X Position                                    47
    * Y Position                                    137
    * Width                                         187
    * Height                                        18
    - Visual Attribute Group                        DEFAULT
    - Prompt Visual Attribute Group                 DEFAULT
    - Foreground Color                             
    * Background Color                              white
    - Fill Pattern                                 
    - Font                                         
    * Font Name                                     Tahoma
    * Font Size                                     10
    * Font Weight                                   Demilight
    * Font Style                                    Plain
    * Font Spacing                                  Normal
    * Prompt                                        Job Type
    - Prompt Display Style                          First Record
    * Prompt Justification                          Start
    * Prompt Attachment Edge                        Top
    - Prompt Alignment                              Start
    * Prompt Attachment Offset                      10
    * Prompt Alignment Offset                       0
    - Prompt Reading Order                          Default
    - Prompt Foreground Color                      
    - Prompt Font                                  
    * Prompt Font Name                              Tahoma
    * Prompt Font Size                              10
    * Prompt Font Weight                            Bold
    * Prompt Font Style                             Plain
    * Prompt Font Spacing                           Normal
    - Hint                                         
    - Display Hint Automatically                    No
    - Tooltip                                      
    - Tooltip Visual Attribute Group               
    - Direction                                     Default
    - Initial Keyboard State                        Default
    - Keyboard State                                Any
        

  • Process Chain got struck and not showing all the variants in the log view

    Hi,
    We have some process chains which are running daily.The problem here is that one of the process chains got struck at some point
    and it is not showing all the variants in the log view but able to see in planning view.
    Could any one please let me know why this is occuring.

    Hi Ramanjaneyulu,
    Thanks for the reply.
    As you said,i clicked on the 'display message' but it is not showing any errors.It is showing
    that the process completed successfully.
    Thanks.

  • Music on my phone does not show all the iTunes artwork, even after doing a backup restore, eliminating all music and restoring

    Music on my phone does not show all the iTunes artwork, even after doing a backup restore, eliminating all music and restoring  I have an iphone5 64 syncing about 8000 songs, so updating all is a time consuming, and now maddening process. Never had a problem before iOS 8. Someone (hello Apple) needs to develop a utility to help manage artwork recovery.

    See earlier post by tt2
    https://discussions.apple.com/message/7217190#7217190

  • BP interaction history does not show all the activities in portal

    Hi Experts,
    We have a problem in application CRMM_ACCOUNT when we go to BP interaction history does not show all the activities in portal as it is thr in activities screen.
    Regards,
    Mark

    Hi Glenn Michaels,
    Thanks for your response , If I look at the activities tab there were more activities than on the interaction history tab .
    In allowed channels for transaction type we have 3 channels.
    Can you guide me what to do next?
    Regards,
    Mark

  • HT1351 My ipod Classic is not showing all the music from iCloud.

    My ipod Classic is not showing all the music from iCloud. I have "show music" enabled.

    Glad 7.7.1 worked for you, I updated itunes on my macbook, and every time i try to sync the music to my ipod classic, it goes for 23 songs and then it freezes and I get "Cannot read or write to this disk", and it ejects it. I tried uninstalling itunes, reinstalling an earlier version (7.6.2) same problem, plus a new issue with itunes. (It was a clean uninstall, btw, I got everything cleaned out, I think, lol). Video's transfer fine. And no good way to get ahold of apple. That's great. If I have no music on my ipod, it's useless. Think they'll give me my money back? (lol)

  • Firefox is not displaying all the images on any of the websites that I access. I upgraded to 4.0 and it worked correctly for about a day and then reverted back to the problem.

    When I open a website using Firefox it displays the text but none of the graphics. I upgarded to 4.0 and it was temporarily corrected. Now it has reverted to no graphics,

    Hi there,
    I have the same issue: FireFox is not showing all images on the page.
    Noticed this in FireFox 5.0. Now I installed FireFox 5.0.1 and still have the same issue.
    The missing images do not even appear in Tools > Page Info > Media.
    The images are usually accessed using DIV tag with a CSS class which contains background-image style. Often, when page opens, the DIV is initially hidden, and JavaScript displays it. Sometimes, jQuery.html() adds such DIV tags, and images rarely appear. Sometimes they do, but more often they do not.
    If I install FireBug and use Inspect Element to find such a DIV, it is there, it contains the CSS class, the definition of the CSS class contains background-image style. If I click the icon to disable this style, and then click it again to enable it, the image immediately shows up.
    Seems to be caused by some optimization which does not detect images like these.
    Hope this helps you reproduce it.

  • Why does it not show all the pictures when i open myspace

    Hello,
    I have apple mac pro desktop. When i open some profile on www.myspace.com, does my computer not show all pictures on that profile site. Can some one tell me if i need to download some software or plugin to see all pictures on the pages. I use safari beta.

    deniz aya wrote:
    Hello,
    I have apple mac pro desktop. When i open some profile on www.myspace.com, does my computer not show all pictures on that profile site. Can some one tell me if i need to download some software or plugin to see all pictures on the pages. I use safari beta.
    Hello deniz aya,
    Welcome to Apple discussions..
    No, you do not need additional software to view the pic, myspace is just not very mac friendly, as they say ( long time coming) they are working on it.
    Myspace pages can be a nightmare, a couple of my friends pages for instance
    have been known to crash my Safari beta & when on version S 2.
    Try using Firefox as well, the "other" browser they recommend other then Safari
    for Mac users, albeit they do not say which version of Safari to use.
    Check pages including the one you have an issue viewing the pics on with the http://validator.w3.org/ to get an idea of how poorly coded they are.
    Eme '~[ ) 
    I just checked my page which has not half the items that other pages use & it Failed validation, 91 Errors, one of my friends pages failed with 490 odd........
    Of course I presume you have flash, as mentioned by QuickTimeKirk.
    To check, in Safari under the Help menu, click on -> Installed plug-ins.
    and check for Flash player.
    Under Safari menu, Safari's preferences, Security tab- Web Content: you have Enable Plug-ins checked correct?
    Message was edited by: Eme

Maybe you are looking for

  • Is it possible to change CONVERSATION_ID in UDF?

    Dear All, I am facing a scenario, which wants to change the CONVERSATION_ID based on one field of the source Message in Message Mapping dynamically, is it possible to change the CONVERSATION_ID in the User Defined Function? If it is possible, could a

  • ITunes crashes upon startup?

    Hello everyone, thanks for taking the time to help! Tonight, my iTunes started crashing everytime I opened it. I haven't done anything new with iTunes recently other than downloading new music. Can anyone help me out? Here are my specifications: Mode

  • BI Intelligence

    Dear All, Hi, It's my privilege to join this site & your company. I am new to forum.  If anybody dear provide mye (BI) 4 manuals of below T.codes SAP NetWeaver 2004s - Business Intelligence (BI 7.0) TBW10 BI - Enterprise Data Warehousing Course versi

  • Required all line item on a single Invoice

    Dear Guru's, My user required all line item (e.g :10)on a single invoice,currently  he is getting 4 line item on a single page,he is getting his invoice on 3 pages instead of 1 page. Pls provide us the solution asap. Thanks In advance. VJ

  • IPhones creating logs on Enterprise 2003 server - cannot connect issues

    A couple of us have iPhones/iPads that we've connected to our work server for email. For the most part, we've been quite successful in retrieving and sending mail. However, about once a week, we are unable to connect to the server. Come to find out,