Safari prompts me "To view this page you have to login to area "Restricted" on ...website" although I am not trying to access to that website and I have never seen that website before.
Safari keeps prompting me to login to some unknown website that I have never been to, nor am I trying to go to.
E.g. Tabs opened: Google.com, Apple discussions --> Suddenly prompted "To view this page, you must log in to area "Restricted" on staging.examiner.com:80"
It prompts about 5 times before it stops and starts again when I open a new tab.
The website that I am "supposed" to log into changes sometimes too.
hi there, i know this was a long time ago but i am having a similar problem and i'm wondering if you can help me.
i followed the instruction you gave previously and here are the copied and pasted text from my end
utilities>network utility>look up tab>entered google.com
Lookup has started…
Trying "google.com"
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 35420
;; flags: qr rd ra; QUERY: 1, ANSWER: 21, AUTHORITY: 0, ADDITIONAL: 6
;; QUESTION SECTION:
;google.com. IN ANY
;; ANSWER SECTION:
google.com. 244 IN A 74.125.235.5
google.com. 244 IN A 74.125.235.9
google.com. 244 IN A 74.125.235.6
google.com. 109827 IN NS ns1.google.com.
google.com. 348 IN MX 50 alt4.aspmx.l.google.com.
google.com. 348 IN MX 10 aspmx.l.google.com.
google.com. 244 IN A 74.125.235.8
google.com. 244 IN A 74.125.235.14
google.com. 348 IN MX 30 alt2.aspmx.l.google.com.
google.com. 109827 IN NS ns2.google.com.
google.com. 244 IN A 74.125.235.4
google.com. 348 IN MX 40 alt3.aspmx.l.google.com.
google.com. 348 IN MX 20 alt1.aspmx.l.google.com.
google.com. 244 IN A 74.125.235.1
google.com. 244 IN A 74.125.235.7
google.com. 244 IN A 74.125.235.0
google.com. 109827 IN NS ns4.google.com.
google.com. 244 IN A 74.125.235.2
google.com. 168 IN AAAA 2404:6800:4003:800::1000
google.com. 244 IN A 74.125.235.3
google.com. 109827 IN NS ns3.google.com.
;; ADDITIONAL SECTION:
ns3.google.com. 172095 IN A 216.239.36.10
ns2.google.com. 172095 IN A 216.239.34.10
ns4.google.com. 282627 IN A 216.239.38.10
alt1.aspmx.l.google.com. 41 IN A 74.125.133.26
ns1.google.com. 172095 IN A 216.239.32.10
alt2.aspmx.l.google.com. 41 IN A 74.125.134.26
Received 508 bytes from 192.168.2.1#53 in 31 ms
>ping
Ping has started…
PING google.com (74.125.235.3): 56 data bytes
64 bytes from 74.125.235.3: icmp_seq=0 ttl=56 time=4.441 ms
64 bytes from 74.125.235.3: icmp_seq=1 ttl=56 time=6.770 ms
64 bytes from 74.125.235.3: icmp_seq=2 ttl=56 time=6.472 ms
64 bytes from 74.125.235.3: icmp_seq=3 ttl=56 time=7.164 ms
64 bytes from 74.125.235.3: icmp_seq=4 ttl=56 time=5.050 ms
64 bytes from 74.125.235.3: icmp_seq=5 ttl=56 time=6.868 ms
64 bytes from 74.125.235.3: icmp_seq=6 ttl=56 time=6.647 ms
64 bytes from 74.125.235.3: icmp_seq=7 ttl=56 time=6.943 ms
64 bytes from 74.125.235.3: icmp_seq=8 ttl=56 time=6.861 ms
64 bytes from 74.125.235.3: icmp_seq=9 ttl=56 time=7.653 ms
--- google.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 4.441/6.487/7.653/0.931 ms
Similar Messages
-
I have just installed Twonky Server to replace a My Twonky account. Now this Name and password request appears any time I try to access Twonky server settings. By the way The Panasonic viera tv and a Pure Avanti Flow still say No Server found
Help!There's a long discussion going on in the Safari forum about this problem - https://discussions.apple.com/thread/4203636?tstart=0. I haven't seen any definitive solutions posted but I've noted that many users appear to be using SingTel as an ISP.
Try viewing the question in the Safari forum and chiming in with your problem. Are you on SingTel?
Clinton -
Okay, I keep getting this prompt That says "To view this context, you need to install the Java Runtime Environment...I believe I have clicked on the More Info link days ago..I believe this is malware..what do I do to get rid of this annoying pop-up? https://www.dropbox.com/s/gtm3khm6ngo0d26/Screenshot%202014-12-10%2019.56.56.png ?dl=0
jackallday wrote:
Kappy, got a page when I clicked saying it can't find the page and it looks like THIS https://www.dropbox.com/s/ldjyssatbmy53u0/Screenshot%202014-12-10%2021.28.24.png ?dl=0
Try http://support.apple.com/kb/DL1572
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2 -
How to i get rid of the redirect notice it shows up on my safari whenever i try to go to a different page
it says "the previous page is sending you to: LINK
if you do not want to visit this page, you can return to the previous page"Yeah, this seems to be something to do with Google, not your iPhone. A search on that error found this page:
http://www.google.com/support/forum/p/Web%20Search/thread?tid=56a3c4b71b3dc1d9&h l=en
which shows people using lots of browsers on different platforms suffering from it. No definitive solutions though. -
How do i get past this message?
To view this content, you need the latest version of the Flash Player. Adobe TV uses the Open Source Media Framework (OSMF) to deliver a superior video experience. Please upgrade your Flash Player to version 10.2 to benefit from this technology.
I am running Mac OS X 10.10.3 with the latest Safari version 8.0.5.
I have uninstalled and removed cache and reinstalled the Flash Player 17 many times, but still get this message when i try to view a video in Adobe TV.
I have version 17 of Flash player installed but the Adobe TV is asking me to upgrade to v10.2.Try using a different browser and/or be sure to install and enable the Flash Player plugins for your browser.
Safari
https://helpx.adobe.com/flash-player/kb/enabling-flash-player-safari.html
Chrome
Adobe Flash Player plug-in - Chrome Help
Firefox
Install the Flash plugin to view videos, animations and games | Firefox Help
Nancy O. -
I have recently downloaded the newest version of flash player (version 11.9.900.117) and it is working fine with things like Youtube. However some websites that use flash player are coming up with the error message 'To view this page ensure that Adobe Flash Player version 10.0.0 or greater is installed'? I dont understand why this is happening as the version I have is 11.9.900.117 for Internet Explorer?? Please help this is driving me crazy!!!
Exactly the same problem with me, and (apart from basic fix issues like disabling ActiveX filtering, etc) no-one seems to know a solution.
OS: Win 7 64 bit
Browser: IE 10
Flash v: 11.9.900.117 (but problem continued after reverting to earlier versions with proper clean uninstalls of 11.9).
I do note that at around the time the trouble started, Google Chrome did some (background) updates, including its embedded version of this latest flash. But if the others (above) don't also have Chrome, that is clearly not the issue. Perhaps it's a registry issue? -
Annoying window switch in Mail Using Safari's "Mail Link to This Page..."
Anyone else have the annoying problem where they use Safari's "Mail Link to This Page", and it opens a New Mail Composer Window, but then opens Mail's main window right over it, forcing you to switch back to the Composer window?
Only seems to happen when Mail has NOT been running. The main Mail window seems to be programmed to take centre stage when it's opened. Very annoying bug!!I have Eudora as my default Mailer in Leopard and don't get that, jfyi.
-
Hi, I have this message on almsot all sites ( sites of videos or cam):
To view this page ensure that Adobe Flash Player version 11.1.0 or greater is installed.
I have the last version 11 8 800 94. I have try to uninstall and reinstall but its change nothing.
I have windows 7 and 64 bits exploitation.
Hope somebody can help me to resolve this problem , thanks in advance for your help.I had the same problem on Safari. After the 11.8 update, my browser stopped loading flash content. I solved the problem by completely deinstalling flash, rebooting the system, and then installed the previous version- 11.7. All is back to normal on my system. Perhaps the problem is 11.8? Good luck.
-
How do I remove a url from "Always view this page in IE"
How do I remove a URL from "Always view this page in IE"?
After the new server is added to the cluster and the AG, remove the old one by first
ALTER AVAILABILITY GROUP [YourAG]
REMOVE REPLICA ON N'OldServer';
Remove a Secondary Replica from an Availability Group
Then evict the old server from the cluster with the cluster administrator or
Remove-ClusterNode OldServer
Remember to verify the quorum configuration after adding the new server and removing the old server.
David
David http://blogs.msdn.com/b/dbrowne/ -
I have an iMac model 4,1 running OSX 10.6.8. The CD/DVD drive went bad and I have replaced it. However I can not get disks to eject. I have asked about this before and tried all all the suggestions I have received but I can not eject.
Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem. I still can not eject. When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
How do I solve this problem?Hi again Hal
Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
You have also tried resetting the PRAM as I suggestion in your other thread...?
See resetting the PRAM > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys. -
My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished but the RESTORE would fail I had an error, could not access Apple server ( some server name I cant remember).
I have plenty of space available on the iphone,
8gb free,
ios version- 6.1.3 ( 10B329)
carrier - Verizon 14.0
Modem Firmware - 3.0.04
Can someone help.
I tried doing my backup restore on the same computer as I once did a year ago. and THis time I cant do the restore on the iphone.
computer osx is 10.5.8
itunes version 10.
I do not wish to go to ios 7 at this time.Settings > General > Reset > Reset Network Settings.
Basic troubleshooting is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, contact the carrier to troubleshoot the network connectivity issues. -
I've been running iTunes on WinXP for years with few problems. I have all my iTunes files on an external USB drive. I just bought a new PC running Win7, 64-bit.
I connected the external USB drive to the new PC and installed 64-bit iTunes on it. When iTunes started up, I pointed it at the iTunes directory in the external drive, using Edit > Preferences > Advanced > iTunes Media Folder Location. It showed a progress bar that it was updating the iTunes Library. I signed in and authorized the new machine. I have one spare authorization.
Then iTunes put up a message "The item you've requested is not currently available in the Hong Kong Store." I had not requested anything from the HK store at that point, and I have never used any store other than the HK one.
When I click OK, the iTunes Store page remains blank, apart from saying "iTunes Store" in the middle of the page.
I went to "View My Account" and pressed the Reset button to "Reset all warnings for buying and downloading items", but that doesn’t fix this particular warning. I also tried Edit > Preferences > Advanced > Reset Warnings and Rest Cache.
But still, every time I click the “App Store” button in the iTunes Store window, the message appears. If I click the Books, Podcasts or iTunesU buttons, these display normally. So I’m stuck with being unable to purchase apps, other than through my iPad and iPhone.
If I move the external drive back to the XP machine, the same thing happens. If I go to another PC - a notebook running Vista - everything is normal.
Any idea how I can clear that message?
Thanks for any help you can offer.Further info on my question above.
I have tried re-validating my credit card, which apparently fixed it for some.
I have also tried uninstalling, re-downloading and installing again.
Neither of these steps fixed the problem. -
Hi, I have a iphone 4 with IOS 5.1.1 baseband 04.12.01 AT&T recently release me but I have presented a problem with the activation of the device, I have restored and updated and I get a message saying WE'RE SORRY, WE ARE UNABLE tO COMPLETE wITH YOUR ACTIVATION AT tHIS MOMENT, PLEASE TRY AGAIN LATER, OR CONTACT CUSTOMER CARE would like to know which means that message and I have to do to activate hopefully help me with this problem and I have 3 months with the phone saying same message ...
thank you very much ...but can not be unlocked
If the phone was NOT unlocked, it can't work or be activated with any other carrier than AT&T. It CAN'T be used with Tigo or Movistar.
Your post makes very little sense. Maybe you can get some help with English. -
I have got a new imac - set up my mail to access my hotmail account and i have logged on today and can't find MY mail ICON any where - this is my first mac !!
Hello
Have you checked the applications folder?
To quickly find it on the top right press the spotlight button it looks like that image
and type in Mail it should appear in the spotlight list, click it to launch mail or alternatively right click it and press open enclosing folder to find out where it has vanished too -
I am trying to access an https site and am getting a "This connection is untrusted" message. I am willing to bypass, but when I click the Add Exception button and then try to click the Confirm Security Exception button, nothing happens.
unfortunately the do_not_trust certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
<br><sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]]
Maybe you are looking for
-
Version tables in Oracle Designer 6i ????????
Hi all, I would like to create some reports out of the version history of my DB. Does somebody know in which tables does the version history of the tables are being stored.??? Thanks in advance, C|
-
Hi all, pls this is a urgent issue.. i am tearing my head .. this is the first report i am developing..pls guys help me out... i am using reports6i ... the report is running properly in the report builder..but it is not running in the application....
-
Hello Can anybody help me out in getting the current weeks dates. I know only know how to get todays date. Thanks Sravanti
-
Impossible d'accéder à l'image disque de sauvegarde « /Volumes/Data-1/MacBook Pro de Olivier (2)old.sparsebundle » (erreur -1). Merci de votre aide
-
Patch 137274-01 will not install
Recommended Solaris 10 patch 137274-01 will not install using either updatemanager or patch by itself. It failed on two V210 hosts (01/2006) and on one V480 host (08/2007). patchadd was run and it said: ERROR: attribute verification of </etc/mnttab>