Safari: When i click the MINIMIZE button, the browser shuts down! Help??

I just downloaded Safari for the first time (coz I'm jealous I don't have a Mac!). Whenever I click the minimize button up the top right-hand corner, the web browser closes completely instead of just minimizing.... Anyone got any idea why this might be happening??
I'm running Windows Vista btw....
Thanks!

Cheers J-G
I actually figured it out. I had just downloaded another program for Mac-wannabes who are stuck with Windows called Rocketdock, which provides you with the Mac version of the windows task bar for your desktop. In my Rocketdock options, there is an option that says "Minimize windows to Rocketdock" and I had this option selected. I have now de-selected it and everything is back to normal

Similar Messages

  • When user clicks on "Like Button," the counter increases but nothing shows up showing the user recommends my site to their friends. What did I do wrong?

    When user clicks on "Like Button," the counter increases but nothing shows up showing the user recommends my site to their friends. What did I do wrong?
    I used the iframe code from Facebook's "Like Button" site; and inserted the code in the html widget popup box, then positioned it where I wanted it on my page and published. It looks fine (though I had to add "http" before my url to get it to show up).
    So, when a user clicks on button, a pop-up opens asking for Facebook password. When I (the user) enter a password, nothing happens after that. I thought the idea was that a user would be able to show their friends that they like my website. After I entered my password in pop-up after clicking on "Like" I went to my facebook page (a company page) to see if it showed that I (the user that clicked on "Like" on iweb) recommended the website. But nothing showed up. I thought maybe it was because Facebook associated my password as the admin for the Facebook page so didn't count it. But a friend tried it and same thing happened. I went back and on one page I put in another facebook code for a combo Like/Send button. It shows up but acted the same as the regular Like button.
    Questions:
    1. Is this the way the Like Button is suppose to work? Only benefit of Like button being that it just counts the clicks on the Like button and does NOT let users share their recommendation with their friends?
    2. If it's suppose to let users share their "Likes" with their friends, what did I do wrong? There were three types of code but in reading discussions, they all say to use iframe. (I used the first choice which I think was html for Javascript SDK and put that in my HTML Snippit box and the Like/Share button showed up on my iweb page next to the facebook icon and the words "likes this" but when I click it, I don't see instructions that it's sending my recommendation to my friends.)
    I must have done something wrong, but can't figure out what. Does anyone know? If the only benefit of the Like Button is the counter, it doesn't seem worthwhile.
    Thanks to anyone who can figure this out!  My website is couponsforfun.com

    You want something like this?
    http://home.wyodor.net/demoos/facebook/
    The send button sends the link to their friends in the address field with a message.
    They recieve a message in the inbox.
    There's no post on a page.
    If they want that, then they should share the link themselves.
    Perhaps it's best to study what facebook has to offer and how it works instead of guessing what it is supposed to do and be disappointed.

  • Purchased Lion, installed it - once I log in - i get the curtain and message to hold the power button till it shuts down.  Worked with the disk repair utility - fixed permissions - still can't get past the "black curtain of death"  any suggestions?

    purchased Lion, installed it - once I log in - i get the curtain and message to hold the power button till it shuts down.  Worked with the disk repair utility - fixed permissions  to hold the power button till it shuts down.  Worked with the disk repair utility - fixed permissions - still can't get past the "black curtain of death"  any suggestions?
    My machine was patched to date 10.x.x.  I was lucky to get an internet connection and I selected the option to re-download Lion... its curruently being downloaded.  What if that doesn't work?
    Any thougths would be appreciated.
    Joe

    And you have a workstation? not a notebook. 
    Usually a driver or hardware, nothing that Disk utility will fix.
    You know of course what a Prohititory Sign is?
    prohibitory sign, kernel panic
    Forum devoted to Lion:
    Mac OS X v10.7 Lion Communities
    Tips and FAQs
    FAQ kernelpanic
    Resolving Kernel Panics
    Avoiding eliminating Kernel panics
    Lion App Compatibility Table - RoaringApps
    RoaringApps Mac OS X Lion Application Compatibility
    did you make sure your apps, drivers, and hardware support Lion?

  • I have a Mac Book and purchased a Bose system that uses an antenna to play music from the the laptop - it works great, but the computer times out and shuts down - Help

    have a Mac Book and purchased a Bose system that uses an antenna to play music from the the laptop - it works great, but the computer times out and shuts down - Help

    Check in "System Preferences">"Energy Saver" to see if you have the "Computer Sleep" bar set too low.

  • I keep getting an error message that my computer needs to be shut down.  It is like a dark screen comes down and I have to hold the on button until it shuts down.  Why is this happening?

    I keep getting an error message that my cmputer needs to be shut down.  A dark screen comes down and it says to restart.  I have to hold the ON button until the computer shuts down.  Then I can restart and it says it is sending a report to Apple.  This seens to be happening a lot lately.  Has anyone else had this problem?

    Hi Carol...
    error message that my computer needs to be shut down. It is like a dark screen comes down
    That is referred to as a kernel panic.
    Help here >  Tutorial: Avoiding and eliminating Kernel panics | MacFixIt - CNETReviews

  • When i mistype a web address my browser shuts down! Why?

    It not only closes the page: it shuts down the entire browser!

    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Visual webpart disappears when i click edit page button

    I have created a visual webpart for a menu with listpicker, am able to deploy the webpart in a page, select lists using list picker and save the page. But when again when i click edit page button, the webpart disappears. and again if i add the same webpart
    in the same page, the name of webpart comes like "Visualwebpart[1]". 

    Even in wiki Page, you can make sure that it doesn't disappear.
    "When you add a web part to a wiki page, save the page BEFORE configuring the web part. If you need to add several web parts, you can add them all and then save. Once the page is saved with the web parts on it, you should be able to configure the web
    parts without any issue"

  • Issue of data getting wiped out when user clicks on back button..

    Hello Gurus,
    I have a selection program which displays ALV on execution. Now I have programmed the "Back" Button of standard toolbar so that when comeone clicks on it, it should leave to selection screen.
    WHEN 'TBACK'.
          LEAVE TO TRANSACTION SY-TCODE.
    But when I do that, the values entered by user during execution of selection screen wipes out and all the selection fields become empty. How can I make sure that when sure clicks on 'Back' button, the selectiuon screen is presented but with values in which user put during execution.
    Regards,
    Rajesh.

    Hi Rajesh ,
    Leave to transaction sy-tcode is as as good as call transaction...so basically using this statement will start the transaction afresh..and give a new selection screen....
    Better option would be to leave to screen 0 (preferaby used for a report )which will take you back to the previous screen processed or leave to screen XXXX for a particular screen( in case of a module pool )
    Hope it helps
    Regards
    Byju

  • Why does my Macbook Pro keep telling me I have to hold down my power button until it shuts down and then restart?, Why does my Macbook Pro keep telling me I have to hold down my power button until it shuts down and then restart?

    While transferring files from one external hard drive to another, my MacBook Pro routinely would freeze and often render a message to hold down the start button until it shut down and then restart. I have i7 why does it keep locking up?

    You can go back to original hardware; run Apple Hardware Test even.
    Remove 3rd party RAM ( much rarer I think )
    USB printers, cables, devices and drivers.
    What changed?
    Also, this is not MBP forum.
    http://www.apple.com/support/macbookpro
    And if you are running Lion, head over there, or Snow Leopard OS X community.
    FAQ kernelpanic
    Avoiding eliminating Kernel panics
    Mac OS X Kernel Panic FAQ

  • After doing a Google search, I click on a link and go to the searched web page.  When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out".  Any idea what is going on with the browser?

    After doing a Google search, I click on a link and go to the searched web page.  When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out".  Any idea what is going on with the browser?

    Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
    * Preferences that have been modified are shown as '''bold (user set)'''.
    * Preferences can be '''Reset to the default''' or changed via the right-click context menu.
    -> In the '''Filter bar''', type '''browser.sessionhistory.max_entries'''
    * Right click the preference '''browser.sessionhistory.max_entries''' and click '''Modify'''
    * Change value from 0 to whatever you want over 0 (Default value is 50)
    * click OK
    -> Close the '''about:config''' tab and then Restart Firefox.
    See this post:
    * https://support.mozilla.com/en-US/questions/860894#answer-229574
    Check and tell if its working.

  • Can I set Safari to open a new window when I click on it in the dock?

    is there a way to set my safari to open a new window when i click on it in the dock i surf multiple websites at once and i dont like how i have to right clik and scroll up to pick open a new window. can i set it to just open a new window instead of opening the page that already opened

    yeah, instead of using multiple windows, you can use multiple tabs inside one window. That way, you can browse multiple websites at once without having to flick back and forth between multiple windows.
    To open tabs of the websites you want to browse, just right-hand click on whatever website you want to visit (For example a site from your bookmarks or a site from a Google search result) and select 'open link in tab'.

  • Loop stop when pressing the minimize button??

    Hi,
    I've made data-acquisition VI, when i run it and press "for example" the
    minimize button of my VI it stops untill i release the minimize button, is
    there anything to avoid this?? So that when i press the minimize button that
    my vi just go's on with it's loops?
    Best Regards,
    Thijs

    > I've made data-acquisition VI, when i run it and press "for example" the
    > minimize button of my VI it stops untill i release the minimize button, is
    > there anything to avoid this?? So that when i press the minimize button that
    > my vi just go's on with it's loops?
    >
    As the other response indicated, we try to keep the loops running, but
    certain things in windows consume the UI thread, meaning that LV can't
    update the UI. You can make a simple VI that charts ten points per
    second and see if when you release the mouse the chart catches up. The
    standard way LV does execution tries to decouple the UI from the
    execution, so that the diagram can continue even while the UI is stopped.
    If this example works and your application doesn't, it is likely that
    y
    our I/O loop is interleaving UI and I/O. If the UI gets blocked for a
    period of time, such as you describe, this is when the UI blocks the
    rest of the loop. If this is the case, and this is important to you,
    you can try to separate the UI from the I/O by moving then to two
    independent loops that communicate via locals, etc.
    Greg McKaskle

  • When i launch Bridge CC and make first click on any button, the program freezes.

    When i launch Bridge CC and make first click on any button, the program freezes. How to solve this problem?

    This error can be caused by the My Web Tattoo extension (application?) that shows as FBSMTWB in your user agent.<br />
    See http://help.fastbrowsersearch.com/
    You may need to reset the user agent after you have removed that program.
    See [[Web sites or add-ons incorrectly report incompatible browser]]

  • When i double click the main button, the open icons come up but no minus sign to shut them off  -- any ideas?  thanks

    when i double click the main button, the open icons come up but no minus

    You have to tap and hold them until they jiggle to see the minus sign.

  • I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the

    I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the motherboard

    The click usually indicates a big problem, but...
    How to reset the SMU/PMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
    http://support.apple.com/kb/HT1436
    Earlier G3, G4, G5 models...
    http://support.apple.com/kb/HT1939
    Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
    See which one your G5 has...
    http://eshop.macsales.com/item/Newer%20Technology/CR2032/ 
    http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/ 

Maybe you are looking for

  • Send button is not enabled in BI Publisher

    Hi all, I have installed BI Enterprise Edition 10.1.3.4, made microsoft word templates (rtf files), and viewed report in BI Publisher. Now i want it to be send through any delivery channels. But in BI Publisher, the 'SEND' button under reports tab is

  • MM Report in SAP  tcode

    Dear All, can anybudy explain where i got these report in sap or any tcode Customization of reports / MIS will help us in keeping a check on the excess inventory, Some of the reports which are immediately required are – •     Summary of the PO’s •   

  • Brand new Mac Pro slowing down

    I have a brand new mac-pro (8 core 2.8ghz,6gb 1x350/2x500gbhd)10.5.5.I have only put about 60gb on start up disk and 200gb on my HD 1.I already get the spinning ball when i open up some app's and to send a email (say 10 words nothing else)takes 10-15

  • We could not complete your iTunes request...message

    Morning folks, I'm sorry if this has been discussed elsewhere, I have looked but can't see it. I need to access the iTunes store from my work laptop, (I have iTunes installed) and when I go to, this message pops up-We could not complete your iTunes r

  • RFC User in CUA locked

    Hello, when i tried to unlock user both globally and locally (in cua) it failed..saying 'still the user is locked''..why ? (refering rfc user here) Thanks Rajesh