Safari will not load gmail unless I go to my router, power it off and power it on.  Gmail will then load in a flash ... for about an hour and then progressively take longer until it will not load at all.  I've taken it to a "specialist" for a clean-up and he found no problems.  Can anyone help?

Do you get an "-5990 error" ?
I started having this problem after installation of Security update 2006-007 and as long as I know, the only way to fix it is:
1) Go to Library>Receipts and send 'SecUpd2006-007Ti.pkg' to the trash
2) Repair permissions with disk Utility
3) Re install Mac OS X Combo Update 10.4.8
4) Insert the original TIGER CD and go to install Mac OS X. Your computer will restart from the CD.
5) Go to Utilities>Disk utilities (on the Menu Bar) and repair permissions of Macintosh HD. After doing this, verify your HD and if necessary repair it.
6) restart again your computer from the Hard Disk
7) launch Safari and try to enter your gmail account.
Now all must run OK.

Similar Messages

  • My Safari will not load any secure website

    Hello Everyone,
    Recently my Safari will not load any secure webpage that I try to connect to, i.e.: Google, Gmail, YouTube, PayPal, but Safari will load insecure webpages that I have either bookmarked or that I manually type in their URL.  Everytime I try and load one of these secure webpages like Google, i get the error "Safari can't establish a secure connection to the server"  I have searched through these threads and have tried a few of the remedies suggested, all to no avail.  I've reset Safari, I've deleated all plug-ins, I've cleared cashes and history, I've removed all cookies and internet data, I've changed my Mac's dns to Google's //, and still no fix.  The problem even persists in safemode.  Even the webpages I can load take forever to load.  Just getting to this forum took nearly 3 hours as every page loaded took roughly 10-15 minutes.  I am at a loss as to what could be causing this and how to fix it.
    Any help on this would be greatly appreciated.
    Here are the terminal command code results that I was able to get:
    Start time: 20:11:34 06/16/14
    Model Identifier: MacBookPro8,2
    System Version: OS X 10.9.3 (13D65)
    Kernel Version: Darwin 13.2.0
    Boot Mode: Normal
    Time since boot: 3:11
    Diagnostic reports
       2014-06-12 securityd crash
       2014-06-12 securityd crash
       2014-06-13 librariand crash
       2014-06-15 PluginProcess crash
       2014-06-16 Kernel panic
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       2014-06-16 ocspd crash
       Jun 16 20:03:21 disk0s2: I/O error.
       Jun 16 20:03:40 disk0s2: I/O error.
       Jun 16 20:04:00 disk0s2: I/O error.
       Jun 16 20:04:20 disk0s2: I/O error.
       Jun 16 20:04:39 disk0s2: I/O error.
       Jun 16 20:04:59 disk0s2: I/O error.
       Jun 16 20:05:19 disk0s2: I/O error.
       Jun 16 20:05:39 disk0s2: I/O error.
       Jun 16 20:05:59 disk0s2: I/O error.
       Jun 16 20:06:19 disk0s2: I/O error.
       Jun 16 20:06:39 disk0s2: I/O error.
       Jun 16 20:06:59 disk0s2: I/O error.
       Jun 16 20:07:19 disk0s2: I/O error.
       Jun 16 20:07:40 disk0s2: I/O error.
       Jun 16 20:08:00 disk0s2: I/O error.
       Jun 16 20:08:23 disk0s2: I/O error.
       Jun 16 20:08:43 disk0s2: I/O error.
       Jun 16 20:09:02 disk0s2: I/O error.
       Jun 16 20:09:22 disk0s2: I/O error.
       Jun 16 20:09:41 disk0s2: I/O error.
       Jun 16 20:10:02 disk0s2: I/O error.
       Jun 16 20:10:22 disk0s2: I/O error.
       Jun 16 20:10:49 disk0s2: I/O error.
       Jun 16 20:11:15 disk0s2: I/O error.
       Jun 16 20:11:34 disk0s2: I/O error.
    kexts (104) (8.2.4) (4.2.4f1) (1.2.2)
    Startup items
       /Library/Audio/MIDI Drivers/EmagicUSBMIDIDriver.plugin
       /Library/Internet Plug-Ins/Default Browser.plugin
       /Library/Internet Plug-Ins/DivXBrowserPlugin.plugin
       /Library/Internet Plug-Ins/Flash Player.plugin
       /Library/Internet Plug-Ins/Flip4Mac WMV Plugin.plugin
       /Library/Internet Plug-Ins/Flip4Mac WMV Plugin.webplugin
       /Library/Internet Plug-Ins/iPhotoPhotocast.plugin
       /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
       /Library/Internet Plug-Ins/OVSHelper.plugin
       /Library/Internet Plug-Ins/Quartz Composer.webplugin
       /Library/Internet Plug-Ins/QuickTime Plugin.plugin
       /Library/Internet Plug-Ins/Silverlight.plugin
       /Library/Internet Plug-Ins/Unity Web Player.plugin
       /Library/iTunes/iTunes Plug-ins/Quartz Composer Visualizer.bundle
       /Library/PreferencePanes/Fan Control.prefPane
       /Library/PreferencePanes/Flash Player.prefPane
       /Library/Spotlight/Microsoft Office.mdimporter
       Library/Address Book Plug-Ins/SkypeABDialer.bundle
       Library/Address Book Plug-Ins/SkypeABSMS.bundle
    Font issues: 8
    DNS: (static)
       link auth: none
    Restricted files: 56
    Safari extensions
    Elapsed time (s): 1905

    You may have more than one issue, but the most important one is that your internal hard drive is failing, or there is some other hardware fault.
    Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • My safari will not load in normal mode.  I can load in safe mode only.

    My safari will not load in normal mode.  i can only load in safe mode.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 300 25 5120 KiB/s 1024 85 \\b% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'\n",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p ' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' '/(sh|ng|ic)$/p' ' $3~/[0-9]:[0-9]{2}$/ { $4="";gsub("  "," ");gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' '/\.(framew|lproj)/d;/plist:|:.+(M.+exec|scrip)/s/:[^:]+//p' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a)print "CPU: "a;if(b)print "I/O: "b;if(c)print "Net: "c" (KiB/s)";if(d)print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2.+/,"",a[n-1]);b=b"\n"$2" "a[n-1]" "a[n]" "$1;c=c$1;} END { d="sort";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF=int($NF/10240)} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L)f=f"\n\t"$0;} END { F=FILENAME;if(!F)exit;if(!f) f="\n\t[N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n\t...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' '/:/!p' ' /:/{$0="'"${p[28]}"'"};1;' ' $0;END { if(NR<100)print "";} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup );c2=(\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status '-F bsd -k Sender kernel -k Message CReq "Beac|caug|dead[^l]|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN" -k Message Rne "Goog|SMC:" -o -k Sender fseventsd -k Message CReq "SL"' '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files*|sort|uniq' -kl -l );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n 'syscall::'${p[33+j]}':return {@out[execname,uid]=sum(arg0)} tick-10sec {trunc(@out,1);exit(0)}'";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v[0]=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "${v[0]}" ]];};A'$((3+i))'() { v[0]=` while read i;do eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "${v[0]}" ]];};A'$((5+i))'() { v[0]=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "${v[0]}" ]];};';done;A7(){ v[0]=$((`date +%s`-v[3]));};B2(){ v[$1]="${v[0]}";};for i in 0 1;do eval ' B'$i'() { unset v[0];((v['$((i+1))']==0))||{ v[0]=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v[0]=` paste -d: <(echo "${v[$1]}") <(echo "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v[0]=`grep -Fv "${v[$1]}"<<<"${v[0]}"`;};C0(){ test "${v[0]}"&&echo "$_";};C1() { [[ "${v[0]}" ]]&&printf "${f[$1]}" "${l[$2]}" "${v[0]}";};C2() { v[0]=`echo ${v[0]}`;[[ "${v[0]}" != 0 ]]&&C1 0 $1;};C3() { v[0]=`sed -E "${s[0]}"<<<"${v[0]}"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;A1 4 19 11;B4 0 0 44;C3 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&D22 11 17 17 20;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 52 0;B4 0 5 54;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 52 6;B4 0 7 54;B3 4 0 22;A3 14 6 52 0;B4 0 8 54;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 53 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 53 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&D13 21 0 32 19;D23 14 1 48 42;D23 14 2 48 43;D13 14 3 49 5;D22 4 4 50 0;D13 4 5 32 1;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D23 22 9 37 7;B1&&D13 10 42 32 40;D23 20 42 32 41;D13 25 37 32 33;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;B1&&for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;B1&&D22 29 35 46 39;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At or near the top of the results, there will be a line that begins with "System Version." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Will not load gmail or ebay pages in full and the tab to save bookmarks is gone I was going to delete it and re install but I dont want to loose my book marks

    will not load gmail I have to use html but will work in windows exploder and chrome
    and ebay does not load in full looks like it did 10 years ago
    the tab to export my bookmarks is gone so I cannot delete it and re install it
    I have used fire fos for years and feel it is vastly superior please help

    Ok Guys and gals, Here is a CLUE ! I have the same problem as listed above. Here is the clue, but I don't know how it figures into the scheme of things.
    I have 2 users set up for my vista OS. The admin user, Fire fox 6.02 works fine. The second user is my name and its fire fox 6.02 is screwed up. I can load Gmail, yahoo, Boost mobile and others in the second user login. But if I log in as Administrator the Fire fox is fine. Fast, clean and stable.
    So Some how my settings in the user #2 is or has corrupted and or changed ! I didnt do it, Firefox somehow changed the settings or became corrupt in my #2 user login account using Firefox 6.02.
    Now I have tried to use a new user in fire fox and that did not fix firefox for user #2 on Vista.
    I also disabled AD BLOCKER and that didnt help either.
    SO my only observation is that the VISTA user #2 account utilizing FireFox 6.02 has changed some how and won't load web pages properly.
    Vista User account #1 Fire fox works Fine...
    Any idea? how to get user accounts FireFox 6.02 to work properly ?

  • Safari will not load pages

    Safari will not load web pages, any suggestions???

    I've the same problem, Facebook is the only page that load... don't know why !
    I'm on Lion 10.7.3 and I even deleted all folders like /Users/XXX/Library/Safari  or Internet Plug-ins
    I reinitialized Safari too, empty the cache... nothing works !
    This is just outrageous ! Does Apple will respond to that ?!!!!!
    I switch to Firefox and for now it works perfectly ! ....

  • Safari will not load webpages

    Safari will not load web pages. The browser hangs and stops loading completel and will not connect to the internet, even though I am perfectly connected to I know it's not the wifi that's a problem. I have looked through multiple forums for troubleshooting safari to no avail.
    I know for a fact that the problem lies within safari SOMEWHERE, and since the only way for me to connect to the internet is through safari (i'm on a school network that doesn't allow me to connect to any other web browsers), I can't run any updates, reinstall safari, download any programs, etc.
    I'm totally stuck in a rut and I don't know what to!

    Launch the Terminal application and copy or drag -- don't type -- the line below into the window:
    curl -I
    Press return. You should get several lines of output below what you entered, starting with this:
    HTTP/1.1 200 OK
    Is that what you get?
    Safari will not load webpages 
    I figured out a way to drag the link into the terminal application, and I did get lines of output starting with HTTP/1.1 200 OK

  • My firefox works but my safari will not load anything

    my firefox works but my safari will not load any websites

    What OS version are you running?
    Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. Then try Safari/History/Show History and delete all history items.  Quit/reopen Safari and test. You can also try try Safari/Clear History and Web Site Data. The down side is it clears all cookies.Doing this may cause some sites to no longer recognize your computer as one that has visited the web site.
    Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. Then try Safari/History/Show History and delete all history items.  Quit/reopen Safari and test. You can also try try Safari/Reset Safari. The down side is it clears all cookies.Doing this may cause some sites to no longer recognize your computer as one that has visited the web site.

  • Just downloaded 10.7.2 on to my macbook pro and now my safari will not load pages.

    I just upgraded from Snow Leopard to Lion...10.7.2 and not my safari will not load web interent is working fine...the safari acts like it is trying but generally cant load them.  every once in a while it will be able to load a page.  My other web browser is having no problem so this is specific to Safari.  any advise would be greatly appreciated.  thanks

    You supply little pertinent about the MBP and the iPhone.
    First... on the MBP... Click on the Apple icon.. Top left in Finder...
     > About this Mac > Version...what does it say?
    Which iPhone and what is its' iOS Version.

  • Talk Talk wifi connection but safari will not load any web pages?

    I have a new Ipad and it is connected to TalkTalk wifi. But the problem is that Safari will not load a single web page?
    Are there any known issues with this problem. My PC connects to the same wifi network and is running fine.
    The build bar for the web page I try to access turns 3/4 blue but then gives an error message, 'cannot connect to server'
    TalkTalk call centre kept saying that they do not support Ipad? But would not elaborate!
    Apple call centre updated IOS 6.1.2 and reset network settings but no solution as yet.
    Do I need to take this back?
    Has anyone had a similar problem?

    How old is your MBP?
    Do you have APP?
    Does this happen all the time? Does it happen on a specific site? What internet connection do you have?

  • Cannot update software and safari will not load

    I keep geting this - Software Update can’t connect to the update server. Make sure you’re connected to the Internet, and then try again.
    But i am connected to the internet fine. I have tried for days, as Safari will not load the home page, or any other, it just hans so i thought updating would help.
    I have tried moving the plist onto the desktop and tried again but that has not worked.
    Running Snow leopard 10.6.7
    any help appreciated.

    Install each update separately. I got iTunes and Remote Desktop to update, but still cannot get Safari to update. When my Mac is supposed to restart, I just get logged out. Am searching the boards to find an answer….

  • Safari will not load a home page after dload of Svc. Pack 3 for XP!!

    After an upgrade by Microsoft to Service Pack 3 for Windows XP Pro, Safari will not load a home page of any kind and I get a blank screen where I normally am able to get Yahoo's Web Page instead.
    Please help!!
    pbjsandwichgd in Ga.

    Probably a good idea to uninstall and then reinstall safari. I got service pack 3 and safari just disappeared, I have reinstalled it and had no problems (other than a 'SPELLING AND GRAMMAR ERROR' pop up as per my other post!
    Hope that helps.

  • I have recently upgraded my mac and ipad to IOS7 and find that Safari will not load onto my iPad. It just shuts down the app. Any ideas? I have been onto Mac who took me through a very long iPad robot, but the problem is still the same! Help appreciated

    I have recently upgraded my mac and ipad to IOS7 and find that Safari will not load onto my iPad. It just shuts down the app. Any ideas? I have been onto Mac who took me through a very long iPad robot, but the problem is still the same! Help appreciated

    Do you mean that you did a soft-reset ?
    Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
    If that doesn't fix it then try closing Safari via the iPad's multitaskingbar and see if it works when you re-open it :double-click the home button to open the taskbar and then swipe or drag the Safari app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
    After trying the above you could also do a soft-reset (even if this is what you've already done it might be worth trying after clearing Safari's cache and closing the app via the taskbar) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Safari will not load after installing OSX 10.7.5

    I recently replaced the hard drive and reinstall MAC OSX 10.7.5 and migrated the the data successfully. Did all the software updates. All software and apps work except Safari. Safari will not open. I did a few of the recommended tips on the discussion boards on here but none of them has worked. I went to ~/library/Preferences and put the on my desktop and tried relaunching safari. Same issue. I unistalled Safari from my applications folder using appzaper and then reinstalled it. Still same issue. One tip was to restore the system. Unfortunetly this system does not have a time machine backup so that will not work. What other tips do you all suggest i try? I'm currently running Safari version 6.0.2

    First, delete the Safari application.
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Firefox will not load gmail

    Gmail will not load in Firefox browser. I can get it in IE. I have disabled add-ons, extensions, reset theme to default, renamed extensions.?? files, re-started in safe mode, and a few other options, but it still won't load. Get "The connection was interrupted
    The connection to was interrupted while the page was loading." However, I can go to, but can't get to the login page or gmail link. I can get to other links there.
    I have cleared the cache and cookies several times, ran in safe mode and removed themes....Did not work.
    == URL of affected sites ==,
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; (R1 1.6); .NET CLR 2.0.50727; MS-RTC LM 8; InfoPath.2; .NET CLR 3.0.04506.648)

    So did anyone ever figure out the problem? I am having the exact same issue. About ready to go back to IE cuz no problem there.

  • Safari will not load completely, just the top line

    safari will not open completely, just the top line appears. I have an Imac oper at 10.5.8

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Maybe you are looking for

  • I have a jailbroked iphone,and  it seems that it has some viruses how can I remove them from my iphone?

    I have a jailbroked iphone,and it seems that it has some viruses how can I remove them from my iphone?

  • Displaying more than one column in TreeControl

    Hi, I have three tables ( LaborOperation, LaborIndex, LaborData). In TreeControl, i am displaying the following table columns, LaborOperation ->operationid, LaborIndex -> indexid, LaborData -> date, value. i want to be like this. + Operation Id(Singl

  • How to load plug-in vi in application

    Hello. I have the main project where top vi calls plug-in vi in sub panel. Plug-in vi is in separate project (or library). Plug-in vi is realized by means of object. Class of this object is descendant class of ancestor class in main project. This wor

  • Tracking - ALC-WKS-007-044 Error

    Hi all. I have problem with my process. When I click ok "Tracking" tab in workspace messagebox is presented with text: An error occurred retrieving process instances (process MyApp/Processes/MyProcessWorkflow). (ALC-WKS-007-044); And on server log ex

  • Composite cable not working with iPhone 4

    I just bought a apple composite cable to use with my car DVD players, i'm not getting video or audio to play on the device.  The instructions say to set the video to output.  does anyone know how to do this with IOS 5? I have a iphone4, ipod touch 4t