Sales Dashboard, the customer is looking to change the 'Opportunities

In the Sales Dashboard, the customer is looking to change the ‘Opportunities’ title label to ‘Acquisitions’.
I am having the same difficulty personalizing the "Opportunities" as well as the "Leads" title labels on my internal test environment. The other labels seems to personalize ok.
Please reference the following screenshots help illustrate the specific personalization which the customer is looking to perform:
Filename = https://gtcr.oracle.com/gtcr-dir/gtcr_763354697/6224385.992/Sales_User.doc
Again, in this case, it is "Opportunities" label that is circled in the screenshot and outlined in Point #1.
I am hoping there is something simple that I am missing here, or whether anyone encountered anything similar.
Thanks in advance.
Message was edited by:
omitchel

All your changes are feasible and as you hoped, really simple :)
1.     Change ‘Opportunities’ label to ‘Acquisitions’ : You can check the page xml and find the source of heading text. You can either use personalization or the extension to change it in a static or dynamic manner.
2.     Change ‘My Open Opportunities(Owner)’ to ‘My Open Acquisitions(Owner)’: Again check the page xml and find the VO attached to the dropdown list. This will provide you the data source. You can make the changes there.
3.     Change ‘Sales Dashboard’ to ‘Sales’. Change the prompt field for the function entry "Sales Dashboard" in the menu "Sales User"
--Shiv

Similar Messages

My IMac has stopped seeing the keyboard. I have changed the batteries and the green light comes on saying it is looking to pair with the IMac but without success. I am left with the IMac switched on and I am unable to enter a password.

I have been using my IMac without a problem when I left it and went back to enter the password the IMac did not see the keyboard. I have changed the batteries and the green light comes up on the keyboard and then starts to flash indicating it is looking for the IMac but nothing happens. I have tried another set of new batteries with the same result. Is there any known problems in this area. The IMac is 5 months old.
Thank you for any help

What operating system does your iMac have? (please always post your operating system to prevent confustion).
If it's pre-Lion you will have to set Mail up manually:
Entering iCloud email settings manually in Snow Leopard or Leopard
Entering iCloud email settings manually in Tiger

APP-FND-01926 The Custom Event WHEN-LOGON-CHANGED...

Hi,
After compiling and placing a 'custom' CUSTOM.pll (and plx) file on the server, when logging into Applications receiving ERROR:
APP-FND-01926 The custom event WHEN-LOGON-CHANGED raising unhandled exception: User Defined exception.
This is for R12.1.3
The code was moved to the original base version of the R12 CUSTOM.pll file...
I read many other Notes on this error, but most refer to an error related to a Program Unit Not found and requiring a regeneration of the JAR files.
Would this be the same situation?
When we place the original back in place the forms login works.
Any ideas?
Thanks,
Lamonte

check ur CLASSPATH environment variable ur Custom.plx library should visible on runtime to Classpath variable.
Baig,
[My Oracle Blog|http://baigsorcl.blogspot.com/]

When login Apps, get APP-FND--01926: The custom event WHEN-LOGON-CHANGED ra

When login Apps, get APP-FND--01926: The custom event WHEN-LOGON-CHANGED raised unhandled exception: ORA-01403: no data found
Applied patch
6241631 11i.ATG_PF.H.delta.7 (RUP 7) and it's pre-requisite patches
Forms can not be launched successfully.
APP-FND--01926: The custom event WHEN-LOGON-CHANGED raised unhandled exception: ORA-01403: no data found
Followed
Note 391243.1: Unable to access forms - getting APP-FND-01926 error (Doc ID 391243.1)
Note 555409.1: Client Gets App-Fnd-01926 Every Time After Bounce Apps 11i Forms Service (Doc ID 555409.1)
these two notes, can not solve the issue.
Executed following action plans:
1. Backup custom.pll file on your issued instance(DEV instance).
2. Copy a custom.pll files from a working environments(i.e. PROD instance) to this issued instance(DEV instance).
3. Compile the new copied Library CUSTOM.pll manually by running the command:
f60gen module=CUSTOM.pll userid=APPS/APPS output_file=$AU_TOP/resource/CUSTOM.plx module_type=library batch=no compile_all=special4. The $FORMS60_PATH needs to be in sync with the the Context.xml specifically the s_f60path variable
i.e >/oracle/apps/test10appl/au/11.5.0/resource:/oracle/apps/test10appl/au/11.5.0/resource/stub</FORMS60_PATH>
5. Run Autoconfig instantiate the changes.
Issue still exists.
Please HELP~~
Thanks,
Jackie

Hello Srini,
app11i@hpfsapp2> ls -ltra CUSTOM
-rwxr-xr-x 1 app11i dba 24576 Aug 29 2001 TMCUSTOM.pll
-rwxr-xr-x 1 app11i dba 20480 Mar 8 2006 CUSTOM.pll.backup
-rwxr-xr-x 1 app11i dba 24576 Feb 22 2007 CUSTOM.pll.20120215
-rwxr-xr-x 1 app11i dba 32768 Oct 4 2007 CHRM_CUSTOM.plx
-rw-r--r-- 1 app11i dba 36864 Oct 8 2007 CHRM_CUSTOM.pll
-rwxr-xr-x 1 app11i dba 20480 Feb 14 15:20 TMCUSTOM.plx
-rw-r--r-- 1 app11i dba 24576 Feb 15 09:22 CUSTOM.pll
-rwxr-xr-x 1 app11i dba 16384 Feb 15 09:23 CUSTOM.plx
I don't quite understand "only one copy of CUSTOM.plx in the PATH directories", what is PATH directories? How to check? You mean environment variable?
EBS version: 11.5.10.2
DB version: 9.2.0.8
OS: Linux x86
Thanks,
Jackie

I have a Windows Server 2008 R2 system. I am using Adobe Acrobat XI Pro. I am looking for the place where I can change the default font from Minion Pro to Calibri? Tools, Content Editing, Formatting

I have a Windows Server 2008 R2 system. I am using Adobe Acrobat XI Pro. I am looking for the place where I can Change the Default font from Miinion Pro to Calibri?
Tools, Content Editing, Formatting

You can't change it.
On Tue, Jan 13, 2015 at 11:22 AM, tonywaidmann <[email protected]>

Show the custom popup window on clicking the people name in sharepoint people search result

Show the custom popup window on clicking the people name in sharepoint people search result
We are doing the below code to open a popup but while clicking on name link its postback the page and not opening the popup in first click but opening in second click.The same issue occurs while navigate to second page using pagination
The below code used to show name in item template
<button id="NameFieldLink" class="temp" style="font-size: 12px;text-decoration:none;color:#0072c6;border:0px solid #fff;background:transparent;margin-left: 1px;height: 15px;padding: 0 10px 17px 0px;text-align: left;cursor:pointer;font-family:
Arial, Helvetica, sans-serif;" title="">_#= DisName =#_</button>
The below jquery code used to open popup in control search template
ctx.OnPostRender = [];
ctx.OnPostRender.push(function () {
$(".temp").on("click", function(event)
event.preventDefault();
$('#fadeout').show();
$('#pop1').find('.tab-content-people').html($(this).closest('.emp-card').find('.pop-content').html());
$('#pop1').show();
return false;

I believe the issue is that you are not actually searching against the result source you made in step #1.
It's not enough to make a result source, you have to tell the search results web part to use it.
Try this:
1. Go to the Pages library of Search Center
2. Create a new Search Results page
3. Edit the page, then edit the search results web part
4. Change the source for the search results web part to your source
5. Add the page to your Search Center navigation
6. Run the search on that page
Scot
Author,
Microsoft SharePoint 2013 App Development
Author,
Professional Business Connectivity Services
Author,
Inside SharePoint 2013
Blog, www.shillier.com
Twitter, @ScotHillier
SharePoint Trainer, Critical Path Training

What is the real ip address to the apple server? Someone changed the host file in windows/system32/drivers/ect, and now I can't do a restore on my iPhone 3gs.

What is the real ip address to the apple server? Someone changed the host file in windows/system32/drivers/ect, and now I can't do a restore on my iPhone 3gs

"You have to change your router's IP address to be able to access it. It will not give you the internet."
I'm not sure what that means Richard, but I did change the router's IP address from 192.168.1.1 to 192.168.5.1- isn't that what you meant in your first post. I know that isn't reflected in my screen capture that I took last night, but I did do that this morning after I read your post.
"Log on to your router and change two settings.
Change the setting in Setup from PPPoE to Automatic Configuration-DHCP and click on save.
Click on Advance Routing and change the setting from Gateway to Router then click on save."
I did this and still same results as far as I can tell. Can't get online through the router.
"Click on MAC address clone under setup tab ... click enable & click clone ...click save settings ... Check the IPaddress under WAN page ....
If getting IP in public range .... try going online ...."
I tried this- at least to the part about checking the IP address under WAN. I assume you mean the WAN page in the modem setup- nothing looked any different after trying what you suggested, and I'm not really sure where I would be "getting IP in public range" or what that means.
I'm about to give up and just buy a new router to see if I can get the same lack of results with a different one. My ISP maintains that everything is set up correctly on their end and really can't do anything more for me. The Modem works and is set up correctly and they can give tech support for a router.
Here's what my basic setup looks like now:
http://i490.photobucket.com/albums/rr270/SukarUDL/BasicSetup.png
Here's what the advanced tab looks like now:
http://i490.photobucket.com/albums/rr270/SukarUDL/AdvancedRouting.png
Modem setup looks the same
Message Edited by Writersbloc on 09-25-2008 07:05 PM

DST: the SQL Cluster did not change the time by itself..

Hello,
DST: the SQL Cluster did not change the time by itself..
Where should I look for the issue. The time was changed manually to continue processing....
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

Hi,
Thanks for your posting.
For the Sql cluster issue, i think you may ask in:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver&filter=alltypes&sort=lastpostdesc
Regards.
Vivian Wang

My macbook screen is damaged..how much will be the cost if i will change the screen..thanks

my macbook screen is damaged..how much will be the cost if i will change the screen..thanks

I have a 2007 17" MBP and the screen looks as thou it is delaminating and I can only see every other vertical lines, about a week ago it started having red or blue hue to the display. I found a replacement screen on eBay for 85.00 but the level of difficulty scared me off, The screen with the clam shell from apple 500.00+ an I still have to put it in and the level of difficulty was lower but still to high. The apple store offered a service, they would have my MBP for a week to 10 days and would send it out to have the screen replaced at a cost of just over 300.00, I do not have to do the work. I feel 300.00 to replace the display on a MBP that cost me over 2500.00 is worth the investment.

I have multiple devices with the same cerificate, once I have a an exception for one, FF denys access to the others. I cannot change the certificates, I need to stop FF blocking them.

I have multiple devices with the same cerificate, once I have an exception for one, FF denys access to the others. I cannot change the certificates, I need to stop FF blocking them.
== This happened ==
Every time Firefox opened
== I attempt to access a web front end on an IBM SVC device

You can't use the same certificate more than once.
See also [[Certificate contains the same serial number as another certificate]]

In the old Numbers I could change the colour of a checkbox using rules - I cannot seem to do this in new Numbers 2013?

In the old Numbers I could change the colour of a checkbox using rules - I cannot seem to do this in new Numbers 2013?
I have an old Numbers sheet where I could make the checkbox Cell go Green when ticking "Equal to" TRUE. When I open the old sheet it into new iWork it functions correctly. But I am unable to copy or paste the rule - nor recreate it.
Any suggestions on how to create a Conditional checkbox cell that goes green once ticked would be most apprecicated.
Thanks - Steve

Numbers 3.0 is missing the logic-based "equal to TRUE" or "equal to FALSE" conditions for conditional formatting. The replacement is text based: "text is TRUE" or "text is FALSE". You can apply these rules to cells formatted as checkboxes.

How can I create a navigation bar in the template so I can change the down state of a button on a page made from the template in DW3?

We're creating pages from a template in DW3. The template includes a header, footer and a navigation bar. We've made the navigation bar an editable region so that we can change the down state of the buttons on pages where it is required. However, when we make a new page from the template and try to change the behaviors of the buttons in the navigation bar it will not allow us to make those changes.

Have you considered using CSS styled text/list menus instead of image rollovers. It isn't hard really and it's actually a much better choice for web accessibility and for search engines to find and follow your links. Here are some links to several CSS menu systems you can try:
CSS Express Drop-Down Menus (tutorial)
http://www.projectseven.com/tutorials/navigation/auto_hide/
CSS Tab Designer creates 60+ CSS Styled Button and Tab Menus (download)
http://www.highdots.com/css-tab-designer/
List-O-Rama (DW Extension)
http://www.dmxzone.com/go?5618
CSS Menu Maker (On-Line Menu Generator)
http://www.cssmenumaker.com/
Pop-Menu Magic2 by PVII (DW extension purchase)
http://www.projectseven.com/products/menusystems/pmm2/index.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

In Yosemite Mail, there is an issue where the signatures no longer toggle as in the past. If you change the existing signature, it just adds the new one vs replacing it within the body of the message. Thoughts?

In Yosemite Mail, there is an issue where the signatures no longer toggle as in the past. If you change the existing signature, it just adds the new one vs replacing it within the body of the message. Thoughts?

Hi howe.sc,
When I checked for how signatures in Yosemite work, I found this.
Mail (Yosemite): Include signatures in messages
Delete a signature from a message: Select the signature, then press the Delete key.
Replace a signature in a message: Delete the existing signature, then add a different signature.
That sounds similar to what you are describing.
Take care,
Nubz

In MAC, I want to change document size from 8.5X11 to 18X24 to create a poster to print through Staples. I created the doc originally in WORD, changed the size in WORD, converted to PDF doc. But PDF doc is still in 8.5X11. Read ADOBE support help info. Te

In MAC, I want to change document size from 8.5X11 to 18X24 to create a poster to print through Staples. I created the doc originally in WORD, changed the size in WORD, converted to PDF doc. But PDF doc is still in 8.5X11. Read ADOBE support help info. Terls me to change size in application rather than printer. BUT ACROBAT Pro does not give me a page set up option in FILE. I can only find one in the printer dialog box. Help!

from the FAQs on Staples website:
I have a file that I know is a PDF, but the website claims it is not in a PDF format. What should I do?
Check to see that the file has the .PDF extension. Also, check that the filename does not have any special characters such as an ampersand (“&”).
Regarding your measurements set to centimeters rather than inches; is it just in MS Word?
Or does it occur in all other applications.
Check your Work preferences first:
If it is happening in all your applications, check your Mac OS System Preferences.

HT5858 In the control center I can change the mute or the rotation but not both. How do I fix this. In settings I can not uncheck both the mute and rotation lock.

In the control center I can change the mute or the rotation but not both. In the settings area therefore I can't uncheck the mute and rotation settings at the same time.

Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
 Cheers, Tom

Sales Dashboard, the customer is looking to change the 'Opportunities

Similar Messages

Maybe you are looking for