Sales data not replicated for materials from ECC

Hello Experts,
When creating a meterial in ECC, the same gets replicated to CRM 7, but the data maintained in the sales tabs of ECC is not getting replicated to the CRM material master Sales & Distribution tab.
I have already maintained the corresponding ECC sales org in CRM sales org, in Tx PPOMA_CRM, and also other attributes.
Thanks in advance,
Vicky

Hi Vicky,
Before trying to download Material from ECC, one has to transfer customizing objects (e.g., Basis Components, Organizational Management (for example, transferred the sales offices), Sales and Distribution (for example, transferred the product groups))
Then one has to map the ECC sales office data with CRM org structure.
Please recheck if you have done all the prerequisite steps to download material in the following help link:
http://help.sap.com/saphelp_crm50/helpdata/en/91/d8fc377cb5be5ae10000009b38f842/frameset.htm
Hope this helps!
Regards,
Chethan

Similar Messages

  • One new vendor created not replicated in SRM from ECC .why

    Hi all
    once in a moon vendor replication wont happen for certain new  vendor so we edit xk02 and next vendor sync job it will be available in SRM but this time i hammered a vendor many times  still not pulled into SRM . other new vendors created fine.
    any restriction stopped you any clue is appreciated.
    I can pull it in different way.but i want why some times sync job failED TO TRANSFER long name vendor more than 38
    Muthu

    HI Deva,
    I am also facing similar kind of issue. where Vendor get updated in the BUT000 but not get updated in BBPM_BUT_FRG0061.
    When i am running the MDS_LOD_COCKPIt. It is showing me Error Message as BP number Already Exist.
    Kindly Suggest me Process, how to update the Table BBPM_BUT_FRG0061.
    Qucihk reply will be highly appreciated.
    Thanks
    KHATRGA2

  • Replication of materials from ECC 6.0 to SRM

    Hi ,
    1 )  Please tell me the steps for replicating the Materials from ECC6.0 to SRM.
    2) if we are trying to push the  P.R from ECC 6.0 to SRM  (PDP Scenario) whether the material should be
    there in SRM  already?
    Regards
    G.Ganesh Kumar

    Hi Andrea,
    I write to pull the master data from ECC as per the guide line given in the link. But there some problem. No master data is being transferred to SRM server from the ECC.
    I am stuck in the process R3AS. When I am running the transaction and seeing the status in R3AM1, the indicator shows, the program is running.
    But when I see the report through SMQ1, the staus is SYS Failure. on further drill down, The error is " The current application triggered a termination "
    Can you help me in sorting out the problem and when I have gone wrong. If you have any documents for step by step procedure for the same, can you forward to my id, darpan2k6 in gmail.
    Regards
    Edited by: imdarpan on Mar 12, 2010 5:53 PM

  • Unable to load Materials from ECC to Cloud due to UoM errors

    Dear experts,
    We are working to set up the ECC integration with C4C through HCI, we maintained all necessary settings in ECC and HCI.
    When we are trying to send Material data from ECC to C4C they are failing in Cloud with error "Solve Configuration Issue in Code List Mapping for field MeasureUnitCode with value PCE", but we maintained all the Material specific UoM in cloud and mapped them with ECC values in Code List mapping.
    Can someone give your input in which scenario this error comes and how UoM Conversions gets updated in Cloud, like ECC Material master.
    Thanks & Regards
    Naren..

    Hi Naren,
    we have experienced a similar problem when loading materials from ECC to C4C.
    What we have seen is that you have to:
    - maintain the basic UoM of the material in C4C
    - maintain all the UoM mentioned in the conversions for the material
    - maintain the Code Mapping for these UoM if the codes are different from ECC and C4C
    Nevertheless we had a problem for materials that in ECC in the UoM conversions section of master data have conversions like: 1 MTR = 1000 MMT (1 meter = 1000 millimeter).
    In C4C we have activated UoM MTR and MMT, and MMT is defined as 0.001 MTR. So the conversion rate is defined in C4C.
    If ECC sends this conversion for the material to C4C we have an error.
    We have solved it modifying the mapping in HCI for the iflow *.erp2cod.material.*: in the mapping, the conversion element is not transferred if the basic UoM is MMT and the conversion UoM is MTR.
    This is an example and a simple workaround that allows us to load these materials.
    Maybe could be useful.
    Regards
    Piero

  • Downloading Pricing condition records for products from ECC to CRM

    Hi All,
         I have a requirement where i  need to download condition records for products from ECC to CRM. The Inputs available for me are Product Id or the material number and the Sales org data.Kindly let me know the step by step procedure that i should follow to download the condition records for the products.
    Note: 1. The Products are already in the CRM system.
              2. I have downloaded the adapter object "DNL_CUST_CNDALL" already.
    Thanks & Regards,
    Shwetha.

    First of check and ensure that if the records are already downloaded. To do so,
    1) Log to ECC system and go to tcode V/06
    2) From here select the condition type you are looking at. Dbl click on the condition type and note down the access seq.
    3) Go to V/07. seelect the access seq you obtained in previous step and dbl click on "Accesses". Here you will come to know the condition table numbers. Note down the table numbers. (example: 002, 567)
    Understand at this juncture that tables from 1-500 are SAP Standard tables and 501 - 999 are customer specific tables.
    1) Log to CRM system and go to se16
    2) Type CNCCRMPR002 or CNCCRMPR567 and Choose F4 from keyboard.
    3) you should find an entry which looks like CNCCRMPRSAP002 or CNCCRMPRCUS567.
    4) query the table with input parameters like Product or Sales Org. YOu should find the records.
    If you fail in step 3, it means that the table itself has not come to CRM. For this do DNL_CUST_CNDALL with OPEN client (go to SCC4 and there Dbl clik on your client. There "NO CHANGES ALLOWED" should not have been selected. If it is so, consult your basis team and explain that DNL_CUST_CNDALL should be done on open client.(Repeat this even if you have already done that)
    If you fail in step4, try downloading DNL_COND_A*** adapter Objects. *** stands for the ECC condition table captured from ECC (step3)
    If you still are unable to find the record in the database table level, Check for the log in SLG1 tcode in CRM system. This gives you an idea of what's wrong.
    Note: Even if you maintain conditions via Product master, ultimateley it gets stored in A* tables in ECC and CNCCRMPR* tables in CRM. So the above procedure holds good for whatever the case might be.
    Hope this helps
    Regds,
    Raghu

  • Companycode 9650 is not setup for materials management

    Hi all,
    i am loading  data from r/3 to CO cube 0copc_c10 from a custom defined datasource.I am getting error as "Companycode 9650 is not setup for materials management". i have checked in rsa/3.there also its throwing same error while displaying (but its showing 2056 records are selected).Dont know what to do.Any help?
    Regards,
    Murali.

    Hi Roberto,
    here is the message i see :
    No cost estimate found for material item 00016 in itemization
    Message no. CK 375
    Diagnosis
    The system could not find a cost estimate for material item 00016 in the itemization of material 1278.357.233 in plant 0800.
    It is possible that the cost estimate for this material has been deleted.
    Procedure
    You can display the costs for this material referenced to cost component view 01.
    The costs for material item 00016 correspond to the cost component view in the costing type in Customizing for Product Cost Controlling. If the costing type does not contain a cost component view, the system displays the costs for the cost components that are flagged as being relevant to stock valuation.
    And DATA SOURCE WAS BUILT ON FUNCTION MODULE(Custom defined).
    regards,
    Murali.

  • Transfer of non-valuated materials from ECC to SRM

    I kindly request your help with an issue that I am facing.
    The scenario is as follows :
    1. There is a non valuated material X (material type UNBW).
    2. MRP run happens and generates a PR with account assignment U.
    3. Transfer report BBP_EXTREQ_TRANSFER is executed in order to transfer the PR to SRM.
    4. The PR reaches SRM, but the SC is not created instead in SLG1 there is an error thrown, "No account assignment exist. Enter an account assignment".
    5. In the backend now If I try to change the PR i get the error " 6Q204 (Procurement profile 36 cannot be changed).
    Is this scenario supported ?? i,e, transfer of non-valuated materials from ECC to SRM.
    Kindly let me know if you have any idea on this.

    Hi,
    As per your query you have not determind accounts assignment. Please do these activity.
    Please see the below link.
    http://help.sap.com/saphelp_srm30/helpdata/en/a9/cde93a2876a81ae10000000a11402f/content.htm
    Regards,
    Anil

  • Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money  for that

    Hi All
         Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money to SAP for that.

    hi,
    asking or teling ?
    I think you need not as long as you are with official support . However please contact sap official support in you region

  • Is it possible to launch SAP GUI (not webGui for windows) from UWL

    Hi Experts,
    Is it possible to launch a transaction or document in SAP GUI (not WebGUI for windows) from UWL? If yes - how do I achieve that?
    Appreciate your help.
    Giri.

    Hi,
    Yes, you can create an SAP transaction iview and open that iview. Refer  following link for task launch :
    http://help.sap.com/saphelp_nw70/helpdata/EN/59/d516690e854c7090ae15bf492a869f/frameset.htm
    regards,
    Jigar Oza

  • Component Allocation LSMW not working for materials having alternative BOMs

    Hi Experts,
    I have a requirement in Component allocation LSMW.
    Component Allocation LSMW was created using a material which do not have an alternative BOM and the LSMW NOT working for materials having alternative BOMs. Currently iam using Batch Input Recording method in LSMW.Can any one suggest me is it possible by recording method in Lsmw. Because in transaction CA02 when we click the CompAlloc button in application tool bar we get a pop up screen with alternative BOM's, we have to choose any of them. If we choose any of the alternatie BOM in the pop up screen then it will be fixed always, but depending upon my flat file value of alternate BOM i need to pick the value. It is not static.
    Can any one suggest me is there any BAPI for this requirement.
    Your hel will be greatly appreciated.
    Thanks & Regards,
    Venkat.

    Use BDC instead of LSMW, that will solve your problem.

  • Movela netflix queue manager not available for download from blackberry app world

    I got a message for an upgrade available for this app, every time I try to run the upgrade it gives me "movela netflix queue manager not available for download from blackberry app world" message. I deleted appworld reinstalled it twice have the same issue. I had this problem before with another app when I deleted the app to reinstall it I had to pay for it again. I already contacted the vendor and they said the issue is with appworld. Is there any solution for this

    Hello randykico and welcome to the BlackBerry Support Community Forums.
    When you purchase an application in BlackBerry App World, you should be able to delete it and reinstall it without having to repurchase it.
    When you reinstall App World to refresh your purchases:
    Open BlackBerry App World.
    Click the Menu key, and then click
    My World
    Enter in your BlackBerry ID email and password, then click Login
    The application list will refresh automatically
    For each application that needs to be reinstalled, select it under the Uninstalled section and click
    Reinstall.
    Let me know how yo make out
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Sales Orders Not Replicating from CRM 2007 to ECC 6.0

    I have been able to successfully replicate my Customers from ECC to CRM. When attempting to replicate a Sales Order from CRM into ECC, the BDoc shows as "Confirmed (fully processed)" in SMW01. When I look at the list of receivers, it shows my ECC system, with a state of "Processed". However, when I look at the Error Segments on the BDoc, I have two events:
    1. No Upload into R/3
    2. R/3 Adapter is Called
    Any thoughts on what I am missing?
    Thanks!

    MCG,
    Thanks for the quick reply. Yes, I have a publication of "All Business Transactions (MESG)" with a subscription of my ECC system. The BDocs never make it into the Outbound queue. I purposely stopped the outbound queue to see if it would show-up ... it never comes in.
    Thanks!

  • Errors while replicating Materials from ECC to SRM

    Hi All,
    I am trying to replicate materials from R/3 to SRM, in SMQ2 of SRM, the status of MATERIAL is still in yellow colour. when i checked in SMW01 tcode, the error is "Category for material group 013 does not exist" where as in R/3 also we dont have any material group as 013.
    All the Prod type & Prod category have been replicated into SRM from R/3.
    And no materials have copied in SRM.
    how to resolve this ?
    regds,
    CB
    Edited by: Channabasappa.K on Feb 17, 2011 10:30 AM

    Hi,
    DNL_CUST_PROD0 & DNL_CUST_PROD1 were in green colour now,
    DNL_CUST_BASIS3 is in yellow colour & i saw in some doc that DNL_CUST_BASIS3 is not reqd from SRM7.0 onwards.
    when i try to replicate MATERIAL, in SMQ2 i am getting status as SYSFAIL & after double clicking on that i got a pop up as "Error in Mapping (Details: transaction SMW01)"
    Upon checking in SMW01 i got the above errors as
    " Category for material group 013 does not exist
    Message no. COM_PRODUCT_API002
    Diagnosis
    If material groups are used in the SAP system, they must exist as categories in CRM/EBP before you import materials. When Customizing object DNL_CUST_PROD1 is imported, the material groups are imported automatically and created in the category hierarchy R3MATCLASS (material group).
    Procedure
    Check whether the material groups have been imported successfully and exist as categories.
    Proceed
    If necessary, import the Customizing object DNL_CUST_PROD1"
    Like this its showing 19 material groups and all these 19 mat groups were not present in ECC.
    Regds,
    CB

  • Customer sales area data not replicated to CRM

    Hello,
    I'm setting up the data replication model for master data based on configuration guide C03.
    We have the following customer master situation:
    existing customers with nr range 500000 - 599999 and account group A are created in ERP and replicated to CRM.
    new customers with nr range 600000 - 699999 and account group B are created in CRM and replicated to ERP.
    PIDE settings are fine.
    The initial download of CUSTOMER_MAIN en CUSTOMER_REL went well. I've set a filter in CUSTOMER_MAIN on field KUNNR: value between 500000 - 699999. Everytime a sold-to business partner is created in CRM or a customer is created in ERP, the data gets replicated to the other system.
    So far so good.
    But here comes the problem: when I assign a sales area to a customer created in CRM (nr range 600000-699999) in ERP, the sales area data is NOT replicated back to CRM. When I assign a sales are to customer created in ERP (nr range 500000-599999) in ERP, the sales area is replicated back to CRM.
    Do I have to run BUPA_MAIN? I don't think so, because sold-to business partner are already replicated to ERP.
    Is the filter in CUSTOMER_MAIN not good? Should I split the nr ranges into 2 rows: 500000-599999 and 600000-699999 instead of 500000-699999
    System environment:
    CRM 7 EnhP2 (CRM RDS)
    ERP 6 EnhP6
    Kind regards,
    Koen

    Hello,
    I found the problem. The PIDE was not set up completely: I only set the account group for ERP customer in the 'R3-->CRM' dialog structure. I've added the account group for CRM customers as well, and now customer data of CRM customers added in ERP, is replicated to CRM.
    Cheers

  • Sales data not getting populated for Material master by LSMW.

    Hi,
      When I am trying to create material manual for sales view material is getting created and the table MVKE(Sales Data for Material) is getting populated with the sales data. But when i Am trying with LSMW METHOD
    Object          :     0020  
    Method          :     0000               
    Program Name    :     RMDATIND           
    Program Type    :     D(Direct Input)
        materials are geeting created but the sales data is not getting populated in the table MVKE(Sales Data for Material) and LSMW program also not showing any error.
    Can any one tell me what is teh problem here.
    Thanks,
    Naren.

    Hi,
    along with VKORG, VTWEG in <b>BMM00</b> are you mapping the below one's also.
    BMM00-XEIV1 = 'X'. "sales 1 view
    BMM00-XEIV2 = 'X'. "sales 2 view
    this will enable the sales(1/2) view.
    Check it once..
    Regards
    vijay

Maybe you are looking for