Sales not showing in reports

Hi all.
I have an invoice of 15th Nov that contains 2 materials. The issue is that when i run any system report or self developed report, only the sales of first material is showing. No report is showing sales of 2nd materail. I dont know why this is happening. If the invoice contains 2 materials and both of the materials have been despatched then why system is not showing sales of 2nd material.
Please respond.
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

Hi
Pls debug the report with the help of the technical guy.
1. You could have given a specific material number as input
2. The item line could be hardcoded in the report.
3. There can be some other way by which the 2nd material doesnt pass the selection criteria you have set.
If you sit with an ABAPer, you should be able to solve it in notime.
Hope this helps.
Reward if this helps.

Similar Messages

Date not showed when report is viewed in PDF .

Hi,
We have a text field that shows the date on which the report is running.Date is not showed when report is viewed in PDF.But in HTML we can view them . Can any one help me out?
Totally there are four pages for the report.

I have observed the PDF driver iin EPM 11.1.2.x is not up-to-date and technically the Date (Text) is there just like in HTML. However, when you increase the View (Zoom in), it eventually does show up.
I have chatted with Oracle Support, and they will not address it with a patch for now.

Subreport dropdownlist does not show any report !!

Just finished preparing two reports, rpt1 (Master), rpt2(SubReport), each a separate report works well. after that i added subreport control to rpt1 and went to SubReport properties to add rpt2 ... but ( Use this report as subreport ) did not show
any report in list.

Hi,
What happend if you write in the textbox for subreport path, the path, works? what version of Report Builder do you have?
Raymundo Chapa, MCTS http://www.inavant.mx/blog http://projectaserverzone.blogspot.com/

Records not showing in Report

Hi All,
I'am facing peculair issue, We have an issue where inventory is showing in -ve.
From 2LIS_03_BF we are loading the data to DSO, from DSO again to Cube.
I can see Reocrds in Cube for a certian Plant , Storage Location and Material combinations....when I gave same selection criteria in Report the records are not shown in Report. I have checked Query designer too if there are any condition applies but there are no conditions as such expet Special Process Indicator K is excluded.
so i checked Special process indicator for that material but its not K.......its Blank.
Inorder to recover the issue, I have selectivdely deleted the material, Plant and Storage location combination and reloaded the data to cube and compreessed the request without checking No marker Update.
Please need inputs here.
SujanR

Hi,
Use 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM to 0IC_C03 Cube and design the report.
Use :See the steps how to load the data to 0IC_C03.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
See some importent SAP Notes in Invventory Lods.
Note 747037 - Update of before images in ODS objects
Note 752492 - Non cumulative keyfigures are incorrectly allowed in ODS
Note 581778 - ODS capability of extractors from inventory management
Note 684465 - BWVORG for purchasing data sources
Note 417703 - Missing duplicate record during extraction with 2LIS_03_BF
Note 929378 - 2LIS_03_BF, 2LIS_03_BX, 2LIS_03_UM and BI 2004s
Note 745788 - Non-cumulative mgmnt in BW Verifying and correcting data
Note 352762 - Collective note purchasing extractors and setup
Note 353042 - Howto Activate transaction key (PROCESSKEY)
Note 352344 - Process key + reversals in Inventory Management
Note 586163 - Composite Note on SAP R3 Inventory Management in SAP BW
Thanks
Surendra Kumar Reddy Koduru

0IC_C03 Data Not Showing in Report

Dear Friends,
We are using SAP BW 3.5. I have a problem with 0IC_C03 Cube.
Problem is:
Data is transfered to BW i can see the data from Cube --> Contents.
But when i create a report i am unable to see only that particaluar data which dont
have storage location.
Can anybody help me why its not showing that specific data which dont
have storage location.
and on other hand we can see the data from Cube -->Contents
Regards,
malik

Yes i am taking care of marker.
all data is ok excep 13 records which have no storage location.
and only these 13 records are not showing in the report and thats why
my stock is not tele with R/3.
Any other hint.
regrds,
Malik

DESCRIPTIONS ARE NOT SHOWED IN REPORT PAINTER

Hi, I have a problem with the report painter, because i am run the report but i realize that if the master data(Commitment item ) is not created for the next year example 2008 and I am running the report for the year 2007, when the report is generated the report does not show the description of the commitment item ...
Anyboy has a suggest
THANKS A LOT!!!
Pat

Hello sayujya Patil,
Thanks for your reply, i have created report in Report Painter, after execution the report i tried in all the parameters under setting menu > report and section layout as well> lead column --> and kept the radio button on key and description, still its not showing the description of the GLs under lead column....
Please reply...
Thank You.

Description of GL are not showing in Report Painter

Hello,
Friends I've made the trail balance in report painter but my problem is the GLs description under lead column are not showing. I checked the lead column and kept the radio button on key and description under report layout but sill its not working. Please suggest...
Quick reply will be more appreciated.

Hello sayujya Patil,
Thanks for your reply, i have created report in Report Painter, after execution the report i tried in all the parameters under setting menu > report and section layout as well> lead column --> and kept the radio button on key and description, still its not showing the description of the GLs under lead column....
Please reply...
Thank You.

Charts not showing on report

I've had crystal reports running for some time on our dedicated Internet server. This has been working OK for the last 10 months.
I've added a new report which now uses charts however I'm having problems in that the chart does not get displayed. No red cross, just a blank white image with no chart.
I've reviewed many support forums and as a result have doubled checked all entries in my web.config and file permissions on temporary file locations. Everything seems OK...
I would point the blame at either something to do with the handlers surrounding CrystalImageHandler.aspx or file permissions, but what I don't understand is that embedded images within the report are working perfectly OK. It is just the chart which is not showing.
I double checked the image http location and both my embedded image and chart use the CrystalImageHandler.
Embedded Image:
http://mydomain.com/auth/CrystalImageHandler.aspx?dynamicimage=cr_tmp_image_5ba728a0-45a7-4732-938f-9ec0e0f9231a.png
Chart:
http://mydomain.com/auth/CrystalImageHandler.aspx?dynamicimage=cr_tmp_image_d4217261-ff67-48d5-97a8-be1fc6bdbe4e.png
Even tried these in new browser windows. The first address shows, the second just shows a blank image.
I've tried the exact same report from my local host and it works perfectly ok.
I've also tried running procmon on the server to try and identify any ACCESS DENIED messages but none are shown.
Any ideas to what might be wrong?
Im using Crystal Reports 2008 with .Net 3.5 (Visual Studio 2008) on IIS7 Windows 2008 Server.
Thanks in advance.
James

I tried to register the DLL however,
regsvr32.exe "c:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sscsdk80.dll"
generates the following windows error:
The module "c:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sscsdk80.dll" failed to load.
Make sure the binary is stored art the specified path or debug it to check for problems with the binary od dependent .DLL files.
The application has failed to start because its side-by side configuration is incorrect. Please see the application log for more detail.
Appliction log entry
Activation context generation failed for "c:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sscsdk80.dll". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis.
I've run procmon and examined w3wp.exe on just processes and threads and everthing qappears to be OK, everything reports as SUCCESS. I've uploaded the output here:
http://www.fastlanesystems.co.uk/tmp/08122010-crystal-chart-issue-procexplorer.txt
Any other ideas to why this might not be working?
Thanks
James

Material Document no. not showing FBL3N Report

Dear Friends ,
Please note i have an issue, which the Material No. not showing in Referecne Key3 in FBL3n ( GR/IR )report.
Thanks & regards
Joseph

i have get corrected as i have add special field in menu settings BKPF-AWKEY.

Data in infoobject not showing in report

Hi,
I have this situation. I can see cost center number in variable screen but the number is not showing when I run the report.
thanks

Hi,
I would suggest you try to see if the data is being populated in the cube for the particualr infoobject.If it is not populated in the cube itself,then check the filters inthe start routine,transfer & Update Routines. If its populating the data then,try to run the query on the same selection criteria and verfiy.This way you can confirm if its the loading into the dataprovider or on the front end that needs to be fixed.
hope it helps

Custom Groups not showing in Reports

Hello,
Per our reporting requirement, I have created few groups in Authoring pane. However, when I am going to select those groups in reporting, its not showing up.
Env: SCOM 2012 R2.
Any help is appreciated.
Thanks,
Binoy Das

Hi,
It seems like that there is a sync issue/latency between the operational database and the data warehouse in your case. Groups should appear in the data warehouse within just a minute or two in most environments. Check errors and performance on
your management servers and sql servers.
Do you see any error or warning Events in the OperationsManager Windows Event log on one of the management servers which could be related to db issues?
Regards,
Yan Li
Regards, Yan Li

Databases difference tool not showing the report

Hi,
I had an issue with the sqldeveloper "+difference between databases+" tool looking like it was working but at the end of the process would not display any report.
in the logs, I could see the error : mainWindowOpened oracle.dbtools.crest.fcp.DataModelerAddin$1@75e6519f
after digging the web, I found that my issue is similar to the one described at Data Modeler Save and Save As not working and the same solution which is to enable the subversion plugin worked for me.
I have met this issue with sqldeveloper 3.1.06.82
Oracle IDE     3.1.06.82
Plate-forme Java(TM)     1.6.0_11
oracle.jdeveloper.subversion     11.1.1.4.37.59.48
Edited by: user4926541 on 31 janv. 2012 01:42

Same for me, as reported in Re: SQL Developer 3.1 EA - Database Diff Issues
Hope someone from development can help us,
K.
Edited by: -K- on 31/01/2012 13:19:
Oh, and enabling SubVersion worked for me too, but obviously this should be addressed in another manner!

PeopleSoft Report Manager does not show up reports

Folks,
Hello. I am using Peopletools 8.49.
The Report Manager has 4 tabs: List, Explorer, Administration, Archives
After I run reports using Process Scheduler, nothing shows up under the above 4 tabs and this message comes up:"Invalide or missing parameter in request" under List tab.
I have followed "Process Scheduler Documentation" - Chapter 5 "Using Report Manager" to configure it, but it's not working out.
The following solution is for PeopleTools 8.44:
http://peoplesoft.ittoolbox.com/groups/technical-functional/peopletools-l/report-manager-nothing-showing-under-list-1011644
Can any folks tell me how to solve this problem in PeopleTools 8.49 ?

Folks,
Hello Thanks a lot for replying.
1) The default local node (PT_LOCAL) has been set a password that is login user password.
2) I think I define the Report node correctly under "PeopleTools>ProcessScheduler>ReportNodes" as follows:
Http Information is selected.
URL: http://127.0.0.1/psp/ps/psreports
(psp is Domain name, ps is Site name while configure Webserver. psreports is a folder in C:\)
URI Host: http://127.0.0.1
URI Port: 80
URI Source: don't need this since Scheduler and Webserver are in the same machine.
Logi ID: PSADMIN
Password:PSADMIN
Under Intergration Broker, I have done the follows:
1) Gateway, Domain, Pub/Sub Server are running.
2) Service Operations: PSRF_FOLDER_CREATE, PSRF_REPORT_CREATE, PSRF_REPORT_DATE_CHANGE AND PSRF_REPORT_DELETE are set "active" and "Asynchronous One Way".
3) Login User PSADMIN are granted Roles "Report Super User" and "Report Dist Administrator".
But Report Manager still cannot display Reports by this point.
The only problem is that under "PeopleTools>IB>Configuration>Service Configuration>UDDI Configuration", when Ping the Inquiry URL and Publish URL, I got such an error message: "External System Contact error."
Inquiry URL: http://PTNTAS28/UDDI/INQUIRY
Publish URL: HTTP://PTNTAS28/UDDI/PUBLISHING
I think the "External System Contact error" cause Report Manager cannot display Reports. This problem is caused by "Gateway" or "UDDI Server" not running correctly.
Thus, I have 3 questions:
First, Do I need to change 4 Service Operations from "Asynchronous One-way" to "Request/Response" ? What is Receiver node for routings ?
Second, do I need to set up UDDI Server and configure it ?
Third,, where to set up single signon for the default local node (PT_LOCAL) ?

Values are not showing in report

Hi,
I have created a report with EVDRE containing several columns. When I use MemberSet: "SELF" for all columns, it shows me the data I have uploaded correctly.
However, if I choose "MEMBERS" for any of the columns, the value field is empty. This is totally incorrect as I get several rows with the "MEMBERS" option, and one of the rows contains exactly the same filtering as when I use "SELF" for all columns. So that row should show a value, but it is empty.
If I choose SUPRESS:Y, it returns 0 rows.
Example ("SELF" chosen):
NAMEID, ADDRESS, TIME, SALARY
A, X1, 2009, 10000
Example ("MEMBERS" chosen for NAMEID):
NAMEID, ADDRESS, TIME, SALARY
A, X1, 2009, (blank)
B, X2, 2009, (blank)
C, X3, 2009, (blank)
Has anyone encountered this before?
Thanks,
Sam

Hey Sam,
I have some additional questions to help me understand what is going on.
What other dimensions exist in the application this report is running in, besides NAMEID, ADDRESS, TIME, SALARY?
What dimensions are in the COLKEYRANGE, besides SALARY?
What are your expansions set as (SELF, MEMBERS, etc) for the other row/column key dimensions?
Are you sure that all the other dimensions are not changing when you go from SELF to MEMBERS? I know this is probably not the case but I thought I would ask anyways.

Why the Image is not showing on Report at runtime?

Post Author: azharrahi
CA Forum: .NET
I am working on a web site which was developed in ASP.Net 1.1. This web site also contains Crystal Reports version 9.
Now I have loaded the web site in Visual Studio.net 2005 and hence in ASP.Net 2.0. Still the Crystal reports version is 9.
Everything is ok and Crystal reports are showing data properly.
But one thing is very strange and annoyable.i.e. When I insert image on Crystal Reports through right click-> Insert->Picture, the image is shown in the design time preview of report, but when I load the Crystal Report on .Net control CrystalReportViewer and run the application, the Image is not displayed. The problem becomes more strange when I Export the Crystal Report to PDF file and MS Excel. Strangely the Image is also exported there and is displayed. Whats the problem? Why Image is not displayed on the CrystalreportViewer of the form on run time and why on exporting to PDF file and MS Excel, it is displayed? Can any body tell me whats the problem behind of not displaying image on runtime?
At least it means that Image is embeded and loaded on runtime. Only now viewing. Only a blank Picture box displayed.

Post Author: Argan
CA Forum: .NET
A couple things can cause this.
Right click on the red x to find out the name of the png file. Search the web server for that png and make sure that the asp worker has access to it.
The other is a image handler issue. Search the kbase for Red X NET 2005 and you will find a kbase or two that addresses this.

Sales not showing in reports

Similar Messages

Maybe you are looking for