Sales order cost objective vs OKB9 Internal order cost object.

Hi All,
we facing an issue with sales order cost objective vs OKB9 cost object.
For IC PO service material, we assigned account assignment category 4.Reasonis Service material was not showing on G\R account.
The G\L account 7898788, we assigned to Service Item (material type DIEN) , for G\Cost 7898788 cost element is assigned in OKB9. Combination business + order 3478787.
Now conflict with sales order cost objective vs OKB9 internal order cost object.
While posting intercompany IR posting system thronging below error messageu2026
Enter only one true account assignment
Message no. KI249
Diagnosis
You made assignments to several objects in CO (cost center, order, project etc.). 2 of these have been created as true objects.
System Response
You are allowed only one account assignment for each cost-relevant account
How to resolve this issue.. Do I make any config changes in the system to overcome this issue?
Or any sub account to assin in VKOA config for internal orderu2026
Regards,
Adi

Hi Waman,
Thanks for your inputs.
Issue : IR failed to post for wax Sales Order -> ICPO - Error: Enter only one true account assignmentu2019.
Background:
Original setup in Test system & Productionu2013 account determination for servive (DIEN) account assignment category u20184u2019 was linked to G/L Account 34444444, As part of project orange u2019, account determination was linked to account u201889710100u2019.
Account u20188970100u2019 34444444 was replaced with 8970100 ,is not linked to any cost center & always post with reference to IC Sales Order as per config in OKB9 based on company code (US99) + cost element (89701100) + business area (9yyy). This caused a conflict while posting IR, system could not determine exact order for posting financial value.
Conflict: Actual Sales Order 34789343 is linked to PO via account assignment category & IC dummy sales order (8014331) is determine via config setting. Two cost objects cannot be linked to one IR G/L account booking.
Regards,
Adi

Similar Messages

Statistical posting to Cost Center using Statistical Internal Order

We have a delivery transction in SD which used both a statistical order and cost center as account assignment objects. However, in the cost center report, the amount was shown in the statistical portion of the report. Why could have happened? Shouldn't the item be shown as a true posting?

When you post to an internal order and cost center one of these is statistical
When you say the internal order is satistical then you have actual cost on costcenters. When the internal order is not statistical the internal order get the actual cost and the cost center statistical.
In the fieldstatus group from the internal order you can make the field statistical requered. When you want only to have statistical cost on your internal order.
With CO-PA it is an different case, see the other reaction on this. But then it is better to use profit center accounting for reporting.
Note SD is posting sales (sales cost) and there should no reason to post it on a cost center
Paul

Employee cost should hit to Internal order

Dear Friends,
We started new plant and hired employers ,cost center profit center not ready yet( we created one Internal order as over head order ).
Employee Cost through Payroll so HR People has already created a new Organizational Unit and we have tagged it to an Internal Order. We have hired some test employees and have run payroll for this newly hired employees.
So the system is throwing the following errors.
Error 1)*Account assignment objects are incorrect. No substitution is possible.*
*Message no. 3G209*
*Diagnosis*
*The account assignment object check showed that, from the point of view of CO, the specified account assignment is not valid, and cannot be replaced by the employee's master cost center or a substitute cost center. This item cannot be posted.*
Error 2)Internal error: No valid return value for segment found
Message no. 3G330
Diagnosis
No valid value was returned as a result of the segment check. The Customizing settings for the general ledger, however, request a value for the account assignment of the segment.
Error 3)No segment found
Message no. FAGL_ORG_UNITS007
Diagnosis
No segment could be derived for the current line.
However, in the Customizing settings for General Ledger Accounting, you have selected the segment as a mandatory balancing field. This means that a segment must be assigned in each line item.
System Response
The posting is rejected.
Procedure
Edit your segment derivation or make changes to the Customizing settings for document splitting.
Kindly suggest me onthis its very urgent.
Regards,
Sudha.

Dear Raviteja,
Thanks for your Reply ,
Allready i checked the link which you have provided but our case is different.
Actually the Employee Cost should hit to Internal order not to cost center.(that is our requirement)
While creating internal order i didnt maintain any profit center bcoz cost center and profit centers are not ready yet for time being we are planning to move Employee cost to internal order later we will settle to Cost centers once its ready.
Thanks & regards,
Swapna.
Edited by: swapnasudha chowdary on Jan 24, 2012 11:59 AM

Cost center v/s Internal Order

Hi
What is the difference between a cost center & Internal Order
Regards
Samir

Hi Samir,
Cost Center is an Organizational unit within a controlling area that represents a clearly delimited location where costs occur. You can make organizational divisions on the basis of functional, settlement-related, activity-related, spatial, and/or responsibility-related standpoints.
Cost Center is a CO Object maintained on long-term basis to capture costs related to particular type of cost based on functionality, nature of cost etc.
An internal order is used to monitor parts of the costs, and under certain circumstances, the revenues of the organization.
Internal Order is a CO Object maintained to capture the costs of specific purpose (like campaigns, events etc) which is of short-term purpose.
Let us understand the difference with the following example...
If you have a Cost Center "HR Department", whenever some expenditure is incurred for HR Dept, that cost will be booked to HR Dept Cost Center.
Let us assume that your company is about to take up a Recruitment Campaign (like campus placements) for about 3 months all over the country.
So, you can create an Internal Order "Recruitment Campaign". The Internal Order can be "Real" and "Statistical".
If you create the Internal Order as a "Real" object, then, at the time of booking the expenses relating to Recruitment Campaign, all costs will flow to the Internal Order and then, costs will be settled to your "HR Department" Cost Center at the period-end.
If you create the Internal Order as a "Statiscal" object, then, at the time of booking the expenses, you can select your "HR Department" Cost Center as well as your "Recruitment Campaign" Internal Order as CO objects. In this case, real postings will happen to Cost Center and statistical postings will happen to Internal Order. There will not be any requirement to settle the Internal Order to Cost Center. Here, this statiscal internal order will be information purposes only...
Hope this is clear, pls revert back for further explanation...
Srikanth Munnaluri

Cost Break Up of Internal Orders-Overhead

Hi mates,
I have created an internal order with an object class: u2018Over Headsu2019, for which costs were pooled and finally internal orderu2019s balances, are to be settled against the FG material.
I want to see the cost components breakup for the costs incurred in the internal order.
Can anybody help as how and where to link the cost component structure to the internal order, so that I could see the cost break up and also request to give the areas of integration between Project System and Controlling
Thanks in advance
KS

Hi,
Report S_ALR_87012996 will be of help to you. For settlements, you look in the config for Allocation structure & settlement profile that your order/order type is assigned to.
Thanks
Jagdish

Finance and Controlling report in combination with Cost center, GL account, Internal Order

Hi Members,
Finance and Controlling report in combination with Cost center, GL account, Internal Order.
Please provide any slandered report in all 3 dimension.
Thanks
Dileep Kumar

Search this query in FI Controlling forum am sure you will get useful results there.
This kind of reports related to Controlling are usually created using Report Writer tool.
In fact majority of reports in Controlling component is created using Report Writer only.

Compare the cost element of each internal order

Hello All,
How can we compare the cost element of each internal order?
let me know how can we maintain the budget for each cost element for each internal order. so that along the year, we can compare budget and actual for controlling purpose.
Thanks
Naveen

Hi,
I guess you mean comparing plan value by cost element for different IOs.
If you want to compare those (same as actual), you could put internal orders, ranges or groups into the respecitve columns. I also did this once I think for car costs, where the manager wanted to see 10 cars next to each other and compare them (in this case it was actual figures, but same is possible with plan values).
You just need to unselect IO on general data selection and use this as characteristic in the columns then.
hope this helps?
regards
Bjoern

Creation of Z reports for client adding two more column that is Purcahse order and delivery dates with Internal order wise

HI Experts,
Can any one help me to add two more column for standard report that is purchase order and delivery dates for Internal order wise.
But here problem is when i checked with ABAP team they said there is no standard functional module to add two column.
Please note below :
Selection criteria is: 1) controlling area
                              2) Fiscal Year
                              3) From date and To date
                              4) Plan Version
                              5) Order Group.
My client suggested : S_ALR_87012993 this tcode to run, but we suggested with S_ALR_87013019 as in this tcode we can get all the details
That is required output fields, as it is showing all details but on yearly basis, he wants this to be period wise and also Abap team is not able to find standard functional module in the second tcode as well.
Out Put fields to Pop up
1) Orders.
2) Budget
3) Actual
4) commitment
5) Alloted
6) Available
These are two additional column
7)Purchase order
8) Delivery date.
Require your help to know which all tables are included to extract above out put fields please help me.
Thanks in Advance.
Regards,
Sudesh

Hi Preeti,
Thanks for reply, can you please let me know is there any other way to show the output fields.
As my client is very specific to run the report on period wise, i also tried to execute the standard tcode S_ALR_87013019 and were we are getting all the required outputs to pop up but this is on year wise, but we can also check by period basis by clicking on order number and actual period basis where we can see period basis.
Also one more question,what is the commitment table which is popping up in this, please advise.
Thanks in advance.
Regards,
Sudesh

PM order creation with refrence to internal order

Hi all
I want to create PM order with the refernce of Internal Order.PM order should also have the same number as that of Internal order. Please guide how it is to be done.
Regards
Anil

Anil,
Internal order and Maintenance order are of two different order category. I dont think you will be able to create maintenance order with ref to internal order.
DP

OKB9-Internal order assignment is not working

Dear Guru
I have an Requirment that whenever Billing document get posted data must flow to xxxxx Internal order.I assign the Internal order to cost element in OKB9.But not when posting billing document I cant see internal order in accounting or general ledger view.

Hi Deepali
If copa is active, revenue will post to copa. Okb9 is just a default and is used when no other cost object found
If you want biling to post only to Int order, assign it in your sales order account assignment tab
Note that in vkoa, you will need to maintain GL acct against Kofi and kofk both in that case
If you want it to post to both IO and copa, enter IO along with Prof segment in sales order
Br. Ajay M

Sales Order value updating in the Internal Order Revenue Planning

Dear All,
We have created an Internal Order and entered the planned value of the Revenue & Costs.When we create the Sales Order ,the Planned Revenue value of the Internal Order is updating by the Sales Order Value,but as per the client requirement ,the planned value of the Internal Order should not get updated by the sales order value.
Please note that we have activated the CO-PA.Is this CO-PA activation is affecting the Internal Order planned values by the Sales Order value?.If so how to come from this issue.
Please help me as how to resolve this issue.
Regards
Subbu

Hi,
Thanks for giving the appropriate SAP Note and I have referred the said note,but in note the SAP has said that
"The attached modification deactivates the update for the order for all order categories (CO internal order, PM order, CS order)."
In our scenario we need to update the planned vales in the CO Internal Order ,PM Order and CS Order except the Sales Order value.Is there any other alternative solution without affecting the CO Internal Order,PM order and CS Order?
Please share as we are in the process of testing.
Thanks
Subbu

Cost and Revenue of Internal Order

Hi
The table for internal order master data is AUFK
but when we assign internal order to sales order and subsequently revenue and cost are booked ,it is accumulated in the same internal order
In which table do we find the actual cost and revenue for the internal order
Thanks and Regards
Sunil

hi..
For internal order level expenses elementwise please use table COEP. Earlier one i mentioned for Material Ledger related cost componant split.
thanks
kkumar

Change cost center in statistic internal order

Hello all,
I have got a problem with the master data of our internal orders. We´ve defined them as statistic objects, and the information of the cost center is an obligatory input within the master data of each internal order. After the first entry has been done the cost center can not be changed anymore. Now we have the necessity to change the cost center in all our internal orders once. Could you help me to find a solution how the cost center remains a changeable input in the master data of a statistic internal order? Or how I may change the cost center just once?
Thanks for your help.
Best regards,
Bettina

Dear Sir,
The field is greyed off if the following is applicable:
-> the order has planned or posted entries
-> you have created a settlement rule on it.
If you want to have the field to be changable, please apply the modification note 198036
regards
Waman

Is there a way to redetermine the cost center for an internal order on a PO

When we create a PO for an asset we enter an internal order number and a cost center is determined from the internal order. Sometimes after the po is created the cost center on the IO changes. The po is not updated automatically on the PO and it results in the wrong cost center being posted to during the Goods Receipt and invoice receipt. Is there a program or batch job that we can run that will redetermine the accounting data on a PO?
Thanks!
Chris Lintner

When we create a PO for an asset we enter an internal order number and a cost center is determined from the internal order. Sometimes after the po is created the cost center on the IO changes. The po is not updated automatically on the PO and it results in the wrong cost center being posted to during the Goods Receipt and invoice receipt. Is there a program or batch job that we can run that will redetermine the accounting data on a PO?
Thanks!
Chris Lintner

To make Cost Center Mandatory on Internal Order

We want to make the Responsible Cost center Mandatory on the Internal Order. Can you pls let me know the config. piece of it.
Thanks in Advance.
Vineet

In SPRO-Controlling-Internal Orders-Order Master Data-Screen Layout-Select Fields. Select your order type. In the area Master data display select Field selection. There you make the fields you want as mandatory, display or hide.
pls assign points if helpful as a way to say thanks.

Sales order cost objective vs OKB9 Internal order cost object.

Similar Messages

Maybe you are looking for