Sales order item details with condition types

Hi Guys,
I am uploading the sales order details using DIRECT INPUT method in LSMW, one line item having 5 condition types, but in the item level structure BVBAKPOM, I can able to MAP  only four condition types.
Is there any way to map more then 4 condition type in the ITEM level structure? Or do we need to loop the item level structure.
Waiting for your valuable replies
Thanks,
Gourisankar.

Hi Harish,
INOB table key is CUOBJ, At run time the VBAP-CUOBJ is not generated yet. Its value is now "999999999999990001".
I guess once the order is created we will get an entry in INOB.
Do you have any other way with which INOB entry can be selected ?
Thank You.

Similar Messages

  • Sales order item details configuration

    Hello All,
    I have a requirement to get the Sales order item details configuration programmatically in user exit in sales order create and change.
    In sales order change i am using function module "VC_I_GET_CONFIGURATION".
    Input for this function module is instance (VBAP-CUOBJ).
    I am getting the configuration here. But i am not able to get it in create mode (VA01).
    Can any one help me please.
    Thank You,

    Hi Harish,
    INOB table key is CUOBJ, At run time the VBAP-CUOBJ is not generated yet. Its value is now "999999999999990001".
    I guess once the order is created we will get an entry in INOB.
    Do you have any other way with which INOB entry can be selected ?
    Thank You.

  • Sale order showing a discount condition type twice in conditions Tab

    Dear Experts,
    Sale order showing a discount condition type twice in conditions Tab.
    Could you resolve my issue?
    Thanks in advance.
    Regards,
    Ravi

    Hi,
        In the Sales order, go to Conditions and in the Pricing 'Analysis' , check for where the system is determining the two values of this discount condition. It may be possible that it is determining from two condition tables.
    Also in the access sequence of this condition type, please make sure that the 'exclusive' indicator is checked for the condition tables.
    Please check if it helps.
    Thanks,
    Saurabh

  • How to update cost related condition type amount in sales order without disturbing other condition types.

    Hi ,
    How to updae only one item condition  ZYV0 value in sales order. If I can see we have several options from pricing type to update condition types but here My requirement is to update only one condition amount .If I can see other pticing types they will update all condition types .
    -Exclusive option is checked for all the tables maintained in access sequence,
    Below options were not worked for me.
    -In condition type ----> Condition category has been updated with "D"(Tax) pricing type-"G" to update in sales order
    - This option worked for me but  condition category  "F"(frieght) and pricing type -H but in conditions tab when I update two condition amounts are activated for one condition type like below.
    ZYV0--30 % (old condition record value updated in sales order)
    ZYV0- 50% (updated condition record)
    Regards

    Hi Rita,
    Tried with condition category "u" and updated with pricing type "U" . It works as same I used old logic.
    with condition categories "D" and "F" it will update old and new condition record values in sales order.
    ZYV0--30 % (old condition record value updated in sales order)
    ZYV0- 50% (updated condition record)
    I have updated  here existing condition record value from 30 % to 50 % validity periods are not changed.
    Regards

  • Sales Order Items align with Truck quantity

    Hello Gurus,
    We are in the design phase and there is a requirement from the client that
    The Sales Order can be with multiple line items. But every line item weight would be equal to a truck weight/capacity. The rest of the items needs to be rejected.
    Example: If 1st line item weighs 10tons and has 20 pallets, and the truck can load only 19 pallets bcoz of weight, then we should be able to reject the 20th item.
    How do we do this ?
    rgds..Ameet

    Hi
    Before going to any solution  I would like to known some open question below..
    1 Take an example that you have some container  whose size may be big but the weight may be lessu2026.
    2. In the above scenario it looks that you wonu2019t have place to load material in the truck as you have not over loaded.., what will be the action on that case
    Assuming that youu2019re  not considering any the size of the material and concentrating the weight of the material (which may be not much real scenario)
    Create a custom table say named by u201CZ_Truck_ capacityu201D which  you can define by any place in the sales order (may be by some PO type). But I would prefer to say that you maintain the custom table with respective to the Shipping Condition and the Truck capacity.
    So in MV45AFZZ in VBAP section you can write the logic that
    u201CIf the SC is u2019 10u2019  then go and check the table u201CZ_Truck_ capacityu201D to know the capacity of the vehicle .
    If the capacity is >= the total weight of all the item (I think the weight can be get from MVKE or MARA or may be some MM table, please have a look for this) then allow the sales order or give an error or massage as per the business requirement.
    Hope that may help you some how

  • How to know if a Sales order item created with or without reference

    Hi,
    I am working on user exit USEREXIT_MOVE_FIELD_TO_VBAP, and I just wanted to know if there is a way to know if a sales order item is created with or without reference to a contract.
    I need to write the code in USEREXIT_MOVE_FIELD_TO_VBAP, however, when an SO line item is created with reference the userexit is being called twice and when the SO line item is created without reference the user exit is being called only once.
    My aim is to check if a SO line item is created with reference to a valid contract. If the item is without reference to a contract or the referenced contract is not valid, then I will have to determine the contract based on the customer contracts.
    Any help on this would be greatly appreciated.
    Best regards,
    Siva

    Hi Vindo,
    The Userexit USEREXIT_MOVE_FIELD_TO_VBAP is called twice when the SO line item is created with reference to contract. The first time the user exit is called there will be no value filled in vbap-vgbel and the second time it comes to the userexit then vbap-vgbel will have a value. I think CVBAK-VBELN will contain the reference if the so line item is created with reference and the value of CVBAK-VBELN contrains blank if the item is not referenced. Anyway thanks for your reply.
    Best regards,
    Siva

  • Info req -- in sales order, item detail tab

    hi all,
    In sales order (VA01), Item detail tab,
    1. what is the purpose of business transaction type field?
    2. if click on the field, it will show list. so, where to create the list?

    Hi
    The purpose of that you have to go thro F1 and understand
    The possible entries for that filed is defined in IMG activity T code OVE5
    IMG--->MATERIALS MANAGEMENT->PURCHASING>FOREIGN TRADE AND CUSTOMS>BASIC DATA FOR FOREIGN TRADE-->DEFINE BUSINESS TRANSACTION TYPES AND DEFAULT VALUES
    Regards
    Raja

  • Can we take standard report for all sales orders based on the condition typ

    Hi all,
    Based on the condition type, we need to take a report for sales orders on the particular date.
    Thanks and Regards.....VM

    Hello again.
    Searching for a solution, I found a Logical Database for sales orders, that have all the information that you need.
    Using like reference the post of Bhagavatula, in the same transaction SQVI you can use, instead of the suggested join, you can select a logical database called VAV in Data source.
    This logical database links the tables, VBAK, VBAP, VBUK and KONV that is the central point of the question.
    You can list the information of logical database using the transaction SLDB.
    In 'Logical Database' inform VAV.
    Press F8 to list all the fields.
    More information about logical database in:
    Link: [SAP Logical Database|http://help.sap.com/saphelp_46C/helpdata/EN/9f/db9b5e35c111d1829f0000e829fbfe/content.htm]

  • Purchase Order item value breakup condition type wise

    Dear Sir,
    We are developing a custom report and in this report we need to reflect  for Purchase Order item wise the break-up of values  at the condition type level .
    In Me23n , at at Item Level , when we click on tab <Condition> then all values break-up at condition type level gets displayed .
    But to use in custom program , we need to know the table  where this information is available .
    Kindly guide us pl .
    Regards
    B Mittal

    Hi,
    This suggestion is based on my understanding of your issue.  May not be straight forward SAP solution.
    I would suggest you to make following assessment for your custom program: (going through the condition tab will lead you to structures)
    1. Try to figure out how the pricing condition are maintained.  Normally you have your Base price PBXX or gross price per EA defined that can be found in the PIR of the material + Vendor combination or in the pricing condition you would have defined.
    2. In same way figure out all the other absolute condition types.  I mean any thing that is not % percentage based on PBXX value. (assess ;your pricing Schema to understand this.
    3. Once you know how is your pricing schema  breakup then try to pick the net price of PO and then do a backward calcuation based on PIR condition value.    .
    Hope this helps.
    thx
    MJ

  • BAPIFM to read Sales Order Item Details

    Hello Experts,
    Any idea if there is a BAPI/FM which I can use to retrieve all item details of a Sales Order?
    ~ Vinayak

    Hi
    Kindly check the below  function module
    BAPI_SALESORDER_GETLIST
    Regards
    Damu

  • Sales order Item and bom template type problem..

    hi.
    i have one scenario.
    i am selecting one itme at sales order..
    this item is having bill of material and bill of material type template..
    so, when ever we are selecting the item at sales order.. child nothing but bill of material also comming.
    how to restrict child items..
    i want to select only item... i dont want to copy the bill of material at sales order..
    i dont want to change type of the parent at bom also.
    Any information plz update me...

    Hi,
    This is standard system behavior. If you select template BOM, the child items are displayed in sales order. If you want,you can delete child items in sales order.
    Not sure about your business process. If you use production BOM, the child item will not be displayed in sales order.
    Thanks & Regards,
    Nagarajan

  • Surcharge rate for sales order item condition

    Hi,
    I have a two condition for sales order item.
    First  condition is ZP00-Price. It is using for automatically price with customer and material. It linked with account key in pricing procedure.
    Second condition is ZI00-Index rate. Calculation type is A-Percentage. This condition value is monthly. It will be used for surcharge with percantage . I have a formule this condition.
    It is not linked with account key in pricing procedure.
    Formula for ZI00 - Index rate:
    (Index Rate to delivery date - 1 / Index Rate to contract start date) x 100
    For example;
    Index rate conditions is entrying monthly;
    Index date          Index%
    01.08.2008         1,05
    01.09.2008         1,15
    01.10.2008         1,17
    Contract start date = 03.08.2008
    Delivery date = 02.10.2008
    ZP00 = 500
    ZI00 = Index rate for sales order item = ((1,17-1)/1,05 ) * 100 = 16,19
    Last condition value = 500 + (500 * 16,19)/100 = 500 + 80,95 = 580,95
    What can I do for this pricing?
    Best Regards
    Gulay Celik

    Hi
    I think that perhaps it is too late. The application supports cancellation and re-billing as separate transactions. Maybe this is not a 'development' problem.
    Cheers
    Dom

  • How to copy sales order item text in to purchase requisition

    Hi Experts,
    We enter text for the sales order items in the sales order item details.
    we have done settings for the purchase requision to copy text from sales order into purchase requisition and this works for purchase requisitions automatically created from sales order.
    we need to get text from sales order to be copied in purchase requisitions which are created by converting the planned order.
    we have tried SPRO settings SPRO->Materials Management>purchasing--->text for purchase requisition.
    but this settings does not works for Pur Req. created by converting the planned order.
    is this because planned order does not have segment for text like sales order and purchase requisition?
    Please let me know if it is possible through standard SAP or with the lease development, any help will be appreciated.
    Thanks
    Anand

    Hi Rajesha,
    Thanks for your reply, some of the items in sales order are procured externally by us and our customer maintains text related to price and specification in the item details of the sales order, MRP creates planned order for these materials and these planned orders are always converted in pur requisition, we want that text from the sales order item details should be copied in to the purchase requisitions converted from planned orders.
    is there any user exit which can be called at the time of saving a purchase req or user exit for converting planned order in to pur req.?
    if there is any such exit available, then I think I can read the pegged requirement of the planned order where sales order item will be found then read the text in the item then copy this text in pur req then save pur req may work.
    but this will be a bulky development, please let me know if we can shorten the development.
    Thanks again
    Anand

  • How to configure Sales order item text copy to Purchase requisition item

    Hi,
    How to configure sales order item text copy to Purchase requisition text then copy to PO item text.
    Regards
    Jack

    Hi Rajesha,
    Thanks for your reply, some of the items in sales order are procured externally by us and our customer maintains text related to price and specification in the item details of the sales order, MRP creates planned order for these materials and these planned orders are always converted in pur requisition, we want that text from the sales order item details should be copied in to the purchase requisitions converted from planned orders.
    is there any user exit which can be called at the time of saving a purchase req or user exit for converting planned order in to pur req.?
    if there is any such exit available, then I think I can read the pegged requirement of the planned order where sales order item will be found then read the text in the item then copy this text in pur req then save pur req may work.
    but this will be a bulky development, please let me know if we can shorten the development.
    Thanks again
    Anand

  • Sales order item Qty check with sale plan qty

    Dear all
    How its poosible  - While creating sales orer system should  check sales order item qty, delivery date    with sales plan qty  for that period. If total sales order requirement qty greater than sales plan qty then system should give error msg.  System not consider stock & inward / outward mvt . only check plan qty.
    in details
    1>  Create Weekly sales plan   -  w.r.t  Material & Plant   -  ( T code u2013 MC87 )
      Eg .   Material  - FG001   , Plant 1001  ,   Week 11.2011  -  2000 Kg 
    2>  Now creating sales order . system check  sales order item qty  & plan qty as per delivery date or week
    Eg .  i> Sales order  no. 1 -  delivery week  u2013 W 11.2011   , item u2013 FG001 ; Plant u2013 1001 ; Qty u2013 1500 kg 
    Requirement :  System check u2013 delivery week u2013 11  according to that  sales plan qty for that material & plant is  2000 kg ;
    total actual  Sales order qty =  1500 kg . so condition is fulfill  system allow to create sales order.
    Eg. ii> Sales order no. 2 u2013 Delivery week u2013 11.2001 ,  item u2013 FG001 ; Plant u2013 1001 ; Qty u2013 1000 kg 
    Requirement :  System check u2013 delivery week u2013 11  according to that  sales plan qty for that material & plant is  2000 kg ; total actual  Sales order qty =  1500 + 1000kg =2500 kg .  so condition is failed  , ( sales requirement qty > sales plan qty ) system should not allow to create sales order, gives error msg.
    Thanks & Regards
    Pramod

    Hello,
    I have made something like that, to replace the defaut Check by one that check purchase order shipping date.. Here is a exemple code for trapping :
    You must place it in SBO_Application_ItemEvent
    if ((pVal.FormTypeEx == "139") & (pVal.EventType == SAPbouiCOM.BoEventTypes.et_VALIDATE) & (pVal.ItemUID == "38") & (pVal.ColUID == "11") & (pVal.Before_Action == true) & (pVal.InnerEvent == false))
                    CheckAvailability();
    Don't forget to disable the SBO Check Availability in the document's config form.
    Sorry for my poor english and good luck
    Chris.
    Message was edited by:
            Christophe Vuignier

Maybe you are looking for