Sales order item gets "Fully delivered" status even if partial qty

Hello,
We have a depot sales configuration in SAP. I found that some sales order lines are getting completed (delivery status "Fully delivered") even if partial quantity is pending for the order line. I checked the status in VBUP table where LFSTA gets the value "C" instead of "B". This is happening for some of the order lines (specially orders with small qty, just an observation).
Can anybody help to know why the delivery status change to "C" inspite of partial delivery.
Thanks,
Rajeev

Thanks for your help but your solution doesn't give any clue/solution to my problem
I checked the customer master for shipping-> Partial delivery tab for fully delivered & partailly delivered cases. All the customer masters have same setting. This is confired by checking in the table KNVV.
As explained earlier we have depot configuration & all Sales orders are created with item category "TAB" & there is no completion rule mentioned in VOV7.
Regards
Rajeev

Similar Messages

  • New pricing on sales order item after partial delivered and billed

    Hi
    I want to change price of sales order item that already delivered partially and
    billed, but I can't search standard function.
    Can any one help me out  in changing the price of sales order item (VA02).....
    Thanks,
    Wizard.

    Hi DongWoo,
    Under what scenario would you want to re-price after billing?  If you change the price how will your customer know?  You will need to contact your customer and let them know not to pay the last invoice, then delete that billing document in SAP and re-issue it.  When you create the billing document in SAP from a delivery or order you can specify how to re-price in copy control.  Whether or not you want to reprice all conditions, taxes or whatever is in the re-pricing type.
    You need to make sure what we send the customer matches what is in SAP, which is why we generally can't re-price after billing.  Make sense?
    If you want to change the price on the still open items you can reject what is open and enter a new line item.  That will pick up whatever new pricing conditions exist, but you may lose your ATP position & allocation status.

  • Sales Order - Returns change the sales order item delivery status

    Hi All,
    we have the following requirement from our users:
    after creating a return, the original sales order should have the
    delivery item status changed.The system should permit that a new
    delivery can be created for sales order item already delivered / billed (a new delivery with the quantity that has being returned) but has a return document,
    without increasing the sales order quantity.
    Does any body got the same requirement ?
    Thanks in advance,
    Marcus

    Hi Marcus,
      After creating return order you have to do the goods receipts.But this doesn't mean that you will be able to create a delivery with the old order itself.
      You have to create the order again and ahve to create a new delivery,goods issue and billing.
      Another option is as Roberto said that you have to reverse the goods issue thru VL09 and then cancel(delete) your delivery and then you can create a new delivery wr.t to your original sales order.
      Reward points if it helps.
    Regards
    Karan

  • Changing the status of the sales order item based on reason for rejection

    Hi All,
    When a Sales order item is rejected then the status at the item level is changed as 'TECO'.When the reason for rejection is removed the status 'Teco' is reset.This status change can be achieved using the user exit 'MV45AFZZ'.But the exit does not allow re-atp calculation whenver a blocked item is release.I have use the exit 'MV45AFZB' ,through this the status change as well as re-atp calculation takes place.But the status changed(Based on reason of rejection) does not appear in the same screen.The change gets reflected only when the sakes order is saved and i open it again.
    I want the status change to appear in the same screen.I am doing my code in the form 'userexit_check_vbap' of the exit 'MV45AFZB'. Please let me know if there are any user exits or BADI's available for the same(Changing the status of the sales order item based on reason for rejection ).
    Regards,
    S.Subasree

    Hi subburamaiah
    If you want the report you can create a separate SIS report . In that take the input field  as a Reason for rejection.. and ask for the output the list of sales orders .Now when you check this user defined report you will give the reason for rejection and check what all orders got rejected on that reason for rejection.
    Regards
    Srinath

  • Status is not updated from delivery to sales order item.

    Dear Folks,
    One user created sales order with 10 line items and he created delivery and later he deleted line item 30 in that delivery document and with remaining 9 line item he done the PGI & Billing.Here what is the problem is the deleted line item in sales order status showing as completed and delivered quatity showing as 10.Status is not updated from delivery to sales order item.Please let me know how to resolve this?
    Thanks & Regards,
    murali.

    Dear Murali,
    Please go to VTLA transaction then select your delivery and order types after that go in to the details of the item level settings here you check field called Update document flow under Control data tab.
    I hope it will help you,
    Regards,
    Murali.

  • Sales order item report based on results analysis key and status

    Hi,
    I am trying to find a a report to generate list of sales order items with following selection
            -invoicing status -invoiced/not invoices (other status)
            -result analysis key assigned to this item (VBAP-ABGRS)
            -system status /released/teco
    Basically i am CO consultant and not so familiar with the SD statuses. I tried VA05 and V.26 but all required selections are not available in these reports.
    If no standard report is available in ERP, i would like to have it in BI. Can some help me with table fields for statuses.
    Thanks in advance.
    Regards
    Raghu

    Hi Raghu
    Go to SE16 and give VBUK table and execute it there you can select the following feilds and then check wheather they are meeting your requirements or not.If they are meeting your requirements then create a new Z report by copying standard VA05 key feilds. and include the other feilds which you need.So you take your ABAP team help
    Billing status     FKSTK
    Posting Status  BUCHK
    Overall status  GBSTK
    Document category VBTYP
    Regards
    Srinath

  • Getting Item Text  from sale order items

    Hi All,
    I am trying to get sale order item text using Include text in smartforms.
    my text object  is VBBP and my text id is 0004.
    What should I pass in Text Name  ?.---Order Number or Item Nunmber or Both.
    If both can you guys explain how to pass both ?.
    will be REVARDED.

    Hi,
    When you see the texts in the line item of va03..
    Double click on the text..
    Then in the menu..Goto -> Header..
    There you can find the Text name..
    Generally if it is Item text..Then the text name will be
    order number + line item
    Thanks
    Naren

  • Sales order item ontime delivery status at order level in Cube

    Hi Guys,
      We have a requirement, currently we have sales order item information in cube where we have some thing called OTD status
    this status is based on actual GI date and requested date so we have 3 staus at each sales order item level ontime, early, late
    but now the requirement is to change the order status either to ontime or late and this status should be at order level instead of
    order and item level, if any one item in order is late then the whole status of order should be late and if on time or early then it
    should be ontime, is there any why to achive this except adding new character in cube or creating new object in system???
    or if not by just adding new character in cube like order status by remodeling and populate data with customer exit?? pls note
    that we are not using 2lis_11_VAHDR we are using 2lis_11_Vaitm only.
    thanks,
    chandra.

    hi Chandra,
    We had similar kind of situation. but you need to implement the logic either by remodelling or creation of new object.
    What we did was as under.
    - Created new DSO with just Order no and the status.
    - After VAITM Delta load - by making it datamart we forwarded the data to that DSO and had the Status logic put up there so you dont need to change the existing model and you have the status at order level in other DSO.
    - this DSO was than included in Multiprovider for further reporting puprose.
    -This way you have very less things to manage and no need to further enhance exisiting model. This status logic may change in future and you have flexibility to do so easily in the system.
    Hope this helps.
    Regards
    Raj

  • How to get PO from sales order item in CRM

    Hi,
    I am building a BI extractor which needs PO for a given complaint. I am able to get the sales order/item for a complaint using crm_order_read FM. Is there anyway to get the PO based on this SO-item. Are their tables that link these two.
    Thanks!

    Table CRMD_ORDERADM_I -> Give Item GUID in filed GUID and get the document header guid in field HEADER. Then use function module CRM_ORDER_READ and table ET_SALES to get the Sales Data for the right item. The PO you are interested in can be any of the fields related to PO in this set. Usually it is PO_NUMBER_UC.
    Alternately, if you want to use only the table reads use this.
    1. Table CRMD_LINK --> get the record with GUID = Item GUID and OBJTYPE_SET = 11 (for Sales Set)
    2. Table CRMD_SALES --> get the record with GUID = CRMD_LINK-GUID_SET
    Get your PO information from this Sales set record for your item. But since, PO is usually associated with the header, you can do the same as above but with the GUID = Header GUID in the CRMD_LINK table.

  • How to make a sales order item deleted in ECC while in CRM just status changed?

    Hi expert,
    I have a requirment, that is:
    1. the user will change the USER STATUS in a line item of sales order to "CANCEL".
    2. When the order was replicated to ECC,the item should be deleted totally and the ITEM in CRM should not be affected.
    How can I implement this? Is there any resolution by just make some configuration?
    Thanks in advance.
    Jerry

    Hi Jerry,
    As per standard SAP, the line item is not deleted (in ECC) based on the status changes at the line item (in CRM)
    You need to do the development to achieve this.  Following points to be considered if you are doing any custom enhancement.
    1. What triggers the sales order replication ? Is it status change at header level ?  If yes, then you need to define a program which will first check the line item status in CRM Sales Order.
    2. Wherever a line item status is CANCEL, it may store in some internal table and then it will call an RFC to delete these line items in the replicated ECC Sales Order.  (without deleting the line items in CRM Sales Order)
    3. Mind you that, this will be a complex enhancement and may give lot of challenges in the sales order replication to ECC.
    Drawback of this requirement -
    1. If your client prefer to have this scenario, then it is fine, but I could see the data inconsistency in all such sales orders.  There will be a mismatch between the sales order in ECC and CRM
    Hope this will be useful
    Thanks and Regards
    DJ

  • How to read the Sales Order( Item ) System status?

    Hi All,
    My requirement is to display the  System status of the sales order item*. When we go to the sales order display, if i double click on the line item , ii will lead to the next screen.Click on status tab,here we can see the Sytem staus. I would like to know the logic to read this sytem status ?
    Thanks,
    Suresh.

    read tables VBUK, VBUP for SD document status indicators

  • How to get sales order item information

    Hello All,
       I ahve defined a new, custom condition type and created a routine in alternate condition type.
       While creating a sales order, when the routine is getting executed, i need the sales order item information. i.e. i need to access VABP table. but when i put a break point, in the routine, i cant see the detials of item.
    can some one tell me how to get item data, in the routine.
    (p.s. this is while creating sales order)
    thanks a lot in advance
    Best Regards
    Amarender Reddy B

    Hi
    I suppose you're speaking about pricing condition, if it's so all information u can have are in structure KOMP and KOMK. The condition record data should be in the internal table XKOMV.
    If there informations u need aren't there u should enanche those structure.
    Max

  • CRM Sales Order Item Status Does Not match R/3 Item Status

    The status of the CRM sales order item is being set to 'In Process' when the related R/3 sales order line item status is set to 'Complete' - when, the delivery quantity is zero for the sales order item.  This happens when the warehouse can't find the stock to pick - the delivery quantity is set to zero.  Thus, the CRM order item status does not agree with the R/3 order item status.  We need for the line item status to be set to 'Complete' in CRM.  Anyone have an idea as to how to make this happen?
    Thanks you.

    Hi Peter and Suresh,
      From the information provided I understand that the sales order created in CRM after replication to R/3 has some status change.
    1.  What are the fields which are updated in R/3 for the sales order created in CRM ?
    2. If sales order fields are updated in R/3 are these updates reflected back to CRM?
    3. If they are reflected back in CRM? Is there still flexibility for sales order to be changed in CRM and replicated back to R/3?
    Can you please share you experiences.. Any help is highly appreciated.
    Thanks
    Jothi

  • Extractor for statuses of sales order items

    Hi Experts,
    If I want to report on different statuses of an sales order item which extractor you will use.
    Regards
    nagini

    hi,
    Use the following:
    2LIS_11_VASTH for header status and 2LIS_11_VASTI for item status.
    Cheers..

  • Free goods determined in Delivery over Order Quantity in Sales Order Item

    Hi Gurus,
    I've a problem about using free goods determination.
    First I created free goods master record with following information
    ZG1010012060075 From 100 PC -> Free good ZG1040012060075 2 PC
    Free goods Category = '2' (Exclusive)
    Free goods delivery control = 'E' (Delivery proportional to quantity in main item)
    Then I've created Sales Order with
    Item 10 ZG1010012060075 4,000 PC.
    Item 11 ZG1040012060075(Free good) has been automatically determined for 80 PC
    Then I've splitted Item 10 into 4 deliveries. The result of free goods determine in each delivery are as follow:
    Delivery#1)
    Item10 ZG1010012060075 = 1,176 PC
    Item20 ZG1040012060075 = 24 PC
    Delivery#2)
    Item10 ZG1010012060075 = 1,176 PC
    Item20 ZG1040012060075 = 24 PC
    Delivery#3)
    Item10 ZG1010012060075 = 1,176 PC
    Item20 ZG1040012060075 = 24 PC
    Delivery#4)
    Item10 ZG1010012060075 = 472 PC
    item20 ZG1040012060075 = 9 PC
    *Remark : Total quantity of 'ZG1040012060075'(free goods) = 92424+24 = 81 PC
    (Greater than 80 PC)*
    I think the system determined free goods in Delivery#4 correctly due to rounding up. But It might not be over the order quantity in Sales Order Item 11. Even though I've set the item category in delivery with Check overdelivery = 'B' (Situation rejected with an error message), the free goods are determined over order qty. BUT if I change delivery qty in delivery#4 Item20 from 9 PC -> 8 PC -> 9 PC, the error message occurred.
    My point is to fix the system not determine free goods in delivery items over order quantity in sales order item.
    Has anyone met this situation before? Do you have any idea about this issue?
    Best Regards,
    Prachya Lalitnorasate

    Dear Sai,
    Thank you for your advice, but it didn't solve my problem.
    I would like the system to determine free goods with proportional to main item AND In the last delivery main item delivered completely free goods must be determined equal to remaining open delivery item.
    Do you have any idea about configuration/customization?

Maybe you are looking for

  • Older DV Tapes Will Not Play or Import Into iMovie

    I have a lot of DV tapes shot ten years ago on a JVC camcorder that I want to import into iMovie. I have a new Canon Vixia hv 30 and I'm assuming these older mini DV tapes are compatible because these old tapes play fine in the camcorder itself, and

  • Music and videos start playing fine but randomly stop and the volume bar disappears

    I have an iPhone 4S and run 6.1.3.  I start to play music or videos (youtube, ESPN, Netflix, any) and they start to play fine but then randomly stop.  The volume bar disappears as well.  But then it reappears and I can play it again.  When I do so it

  • Shortcut to Show iTunes when Minimized?

    Hi everyone. Okay, since I updated iTunes (7.0.2) in the past couple months, I can't seem to figure this out. If I minimize or hide iTunes, how can I call it back to show on my screen using my keyboard, without having to use my mouse to open it by cl

  • Warranty for StorE Alu 2 500GB

    Hi Having never needed support for my Toshiba products before I am lost trying to find how I can RMA my Toshiba Store Alu 2 500GB drive which has died on me. By the way, I only have the drive and cable left, as I binned the original box it came in an

  • Best Organization Chart

    I would like to know the best organization chart webpart that I could easily install in my team site. It should be user friendy, with nice theme as well as easily editable. Also it should work with list as well as Active Directory.Thanks