Sales order quantity decrease after delivered and PGIed.

Hi All,
I need all of your's help for the below mentioned requirement ---
--- Customer care can decrease a sales order line after it has already been delivered and PGIed. Customer care receives a warning massage, but can ingore this warning and proceed with the change. The requirement is to make this warning massage as a hard error massage so that it cant be changed.
Please guide me whether there is any settings by which I can make this as error massage so that it cant be changed by the customer care after Delivery and PGI is done.
Kindly guide me with the complete details ASAP.
Thanks,
Som.

Hi Seshu,
Thanks for your kind help, and please help whether there are any other way to do this warning massage as hard core error massage.
And as you said i was trying with that - after entering into SHD0 and putting VA02 its asking for the Variant, so can you please guide me with the required variant name.
Please let me know.
Thanks again,
Som.
Edited by: som1983 on Jul 28, 2011 2:04 PM
Edited by: som1983 on Jul 28, 2011 2:05 PM
Edited by: som1983 on Jul 28, 2011 2:05 PM

Similar Messages

  • Sales order quantity field editable even when billed.

    Hi Gurus,
    Good Day to you all!
    We have this sales order that is already delivered and billed. I was just wondering why the sales order 'order quantity' field can still be changed or is still editable? Is it standard procedure that it would be disabled and uneditable? Is there a configuration behind this?
    We have some sales orders that are directly billed without any need for delivery. These sales orders shows the order quantity as disabled and uneditable unlike the one stated above. Anyone can please help regarding this problem
    Thank you very much!
    Best Regards,
    JV Nunez

    Dear,
    User exits in the program MV45AFZZ - USEREXIT_FIELD_MODIFICATION or USEREXIT_SAVE_DOCUMENT
    SEREXIT_FIELD_MODIFICATION -> you can disable/enable screen fields by using this user exit as you want quantity in VA02.
    screen-name = 'RV45A-KWMENG' OR " Order quantity
    screen-name = 'VBEP-WMENG' OR " Order qty in Schedule Lines
    screen-name = 'RV45A-KMPMG'. " Order quantity in "Structure" tab
    SCREEN-INPUT = 0.
    Please check with ABAPr.
    Regards,
    R.Brahmankar

  • Sales order quantity billed instead of delivered quantities?

    Hello.  I am having an issue with billing delivered quantities.  This is the scenario:
    3rd party, non stock materials, are assigned to a network activity in cj20n.  These items generate a PR which is then converted to a PO and goods receipt is posted to the network activity. A sales order is created and assigned to this wbs.  Delivery from project is then carried out in CNS0 and picking and goods issue is posted in vl02n.  If full quantity received to project is not issued out in vl02n, upon billing in vf01, the total sales order quantity is billed.  How do I alter my configuration such that only delivered quantities are billed?

    Hi
    Its seems that your sales order quantity billing issue has been solved.If it is solved then kindly share with us,how the problem has been solved.As there prices are not picking in the billing document, so please check the pricing type that has been maintained in the VTFL copy control.Secondly also check in VOV7 wheather item category is relevant for pricing has been maintained or not.
    You get the delivery document to determine prices from sales order to delivery through copy controls.
    NOTE:If the issue(Sales order quantity billed instead of delivered quantities) has been solved then kindly close the thread and  post your issue through new thread
    Regards
    Srinath

  • SALE ORDER QUANTITY LESS THAN DELIVERY QUANTITY ? NO CECK IN SAP ??

    Hello friends,
            I created a sales order of quantity  10 , having two material codes each having quantity 4 and 6 . i created delivery for the one by putting delivered quantity 4 and save , then i created delivery for second and put delivered quantity 8 which was greater than the sale order quantity left ,system saved the delivery and didn't popped any error message.  
                                     Does SAP have options to over come this mistake by end users.
    regards

    Dear Joshi,
                      Please get in touch with your abap er as there user exits which can be written to avoid this situation.
                      Let me explain you further one more situation.
    First one, Your query is if for  item A ord qty is 6 the system saved the delivery with 8 qty which is greater than ordered quantity.  I know the gives a warning doing this.
    Second Situation :
    Say item A ordered qty is 5, and i made a delivery for 3 and saved it. Now the open quantity on the order is only 2. (5 -3 =2).  But one of our users reduced the ordered quantity to 2 despite saving a delivery with quantity 3.
    so the situation is ord qty is 2 and delivered is 3 qty. which is again wrong. But while reducing the ordered quantity less than the delivered quantity the system gives a warning message telling "  ORDERED QUANTITY IS LESS THAN DELIVERED QUANTITY ".
    Also just imagine we made delivery for qty 5 and invoiced it.After which you reduced the delivered quantity to say 3. So delivered is 3 but invoiced is 5.
    Hence for these kinds of practical problems we have addressed them through user exits with the help of our ABAP'ers by turning those warning messages into error messages by selecting the suitable message class.
    Hope the explanation helps you. And thanks for all your patient reading.
    Reward points if useful.
    Thanks & Regards
    Sadhu Kishore

  • Table and Field for Open Order Quantity for a Customer and Material

    Hi
    I created two sales orders 3 and 5 quantities, and delivered 1 qty in the second order.
    when I checked the table VBBE or VA05, I am able to see 3 and 4 qantities open.
    but I want to see the total 7 as open order qty, i.e, 3+4=7
    because both the orders are placed by the same customer and same material
    can u please tell me in which table exactly the total open order quantity for a customer and total open order quantity for a material is stored
    Madhu
    Edited by: madhubabu rao on Jul 1, 2008 1:49 PM

    HI,
    U can get the information in VA05 as there are columns like confirmed quantity and order quantty and status. U can use  summation button (add upto values) to get required information.
    Thx,
    Pramod

  • Tracking the actual sale order quantity

    Hi Friends,
    How to track the actual sales order quantity given by the customer.
    Ex: we assume the customer has placed an order of 100 units and stock is only 90 so we create the sales order for 90 units only.
    How to find out the difference of 10 units as a report in standard sap system.
    Thanks
    AJ

    Dear AJ,
    This is how normal sales process works.
    You create Sales Order line item for the quantity that customer has requested. (eg: 100)
    Then you do a ATP for that Line item. Let's say you have only 90 in the stock. In that case system will confirm 90 for the sales order line item. (You can see the confirmed quantity in the Schedule line tab)
    Normally we don't change the LI quantity as per the ATP confirmed quantity (i.e 90). Because then we loose the visibility to the customers original requested quantity (i.e 100).
    Say you don't change your Line Item Order quantity to 90. Then your delivery & billing will be for 90.
    So you can see in VA05, Order quantity as 100 and confirmed quantity as 90.
    Your sales reports will show delivery & billing as 90. So that you have a clear visibility to the original order quantity, delivered quantity & billed quantity.
    Further if remaining (open) quantity 10 is appearing your MRP & creating troubles, please use Line Item Rejection Reason as Completed. So that everything is perfect.
    Coming back to your issue.
    Since your changing LI quantity to 90, you cant see 100 in the VA05 report. It always show the existing sales order line item quantity, which is 90 in this example.
    Only way you can find your original sales order quantity is in the Line Item / Change Log.
    This can be view by selecting below Menu option.
    Environment -> Changes
    If you execute it for the relevant Line Item, you can see the Change log. In that by double clicking relevant quantity change line, you  can see the old value & new value. (In this example 100 & 90)
    But that is not a good practice to do as changes will show all quantity changes that you might do based on  customer request. (Imagine if you customer ask to change it later to 95 not 100).
    In that case change log will display 100 to 95, then 95 to 90. So your loosing the required visibility.
    Hope this is helpful to you !

  • Sales order quantity in MD04

    Hi Gurus,
    This is my problem -
    51 links (Base UoM) = 2.5 feet (Sales & Production UoM)
    Delivery unit = 53 links
    In VA01 -> when I entered Sales order = 12 feet system automatically rounded it to 12.990 feet.
    I also received a pop up showing "Item 10 rounded to 265 lk. Rounding reasons 1,2,8 -> long text"
    In MD04 -> when I look at the Sales order quantity = 264.996 links.
    Ran MRP and the planned order quantity = 265 links
    There is a surplus inventory of  ------------> 0.0004 links
    Settings in CUNI: (due to business reasons - Links can NOT be in Decimals. Feet has to be in decimals)
    CUNI
    Decimal places
    Decimal rounding
    Link
    0
    0
    Feet
    3
    3
    Please help

    Thanks a lot Dave. You are the only guy who really understood my issue in the first place.
    And you asked all the right questions.
    Just for the sake of our discussion - I created a brand new material (material setup is same as production client). MRP settings- Proc type E, PD, EX, no rounding profiles, strategy 40, Collective.
    Material master sales view
    Rounding on Sales order
    MD04 before MRP run
    MD04 after MRP run
    MD04 in Feet
    Production order conversion
    Please let me know if you can not see these images.
    I really appreciate your help.
    Sorry for the delay in reply. I was travelling.
    Thanks

  • Rounding : User flexibility to edit the Sales Order quantity.

    Hello Gurus,
    We are on 6.0 and have the following requirements.
    1st requirement: To round the Sales Order Quantity to the Alt Unit of Measure (higher or lower). As a solution we could use the Rounding Profile.
    The problem is with 2nd requirement below.
    2nd business requirement: When the system rounds the Sales Order quantity to higher or lower, the user should have the flexibility to edit the Sales Order quantity and decide whether to permit rounding or not, as suggested by the system.
    Currently, with standard config, the system gives the message V1720 saying it has rounded the quantity with a reason. After the rounded quantity is suggested by the system, even if the user edits the Sales Order quantity, the system puts it back to the previously rounded quantity.
    SYSTEM REQUIREMENT : We would like to have the Rounding but we want the user to be able to edit the rounded quantity.
    REASON : Since the products are high value, we want the customer to feel comfortable with the rounded quantity.
    The users do not want to impose the rounded quantity compulsorily on the customer. If the customer is not comfortable with the rounded quantity, the customer should be givne the choice of a non-rounded quantity.
    IMPACT : In these difficult times, every Order is important. If we don't not give this choice to the customer, the customer might decide not to order at all. We do not want to lose the Order just because of the higher rounded quantity. But, at the same time, we would like to give the choice to the customer of the rounded quantity and his non-rounded quantity.
    PLEASE NOTE : In this situation, the Rounded quantity is slightly different from Minimum Order quantity. The Minimum Order quantity is not the solution.
    QUESTION : Is there any standard setting or is User Exit, BADI the only method ?
    Thanks in advance
    Srinivas

    Hi Prakash,
    Thanks for the reply. Actually these customers are created as a Agents and we are using these customers in Commission rebates. So at the time of Rebate partial credit memo, then these agents should be active otherwise system will give the error.
    So what i am thinking is, Standard sales order creation needs to be restricted so that users can not able to create standard order.
    So can you suggest is there any user exit can be used to prevent creation of standard order for these account group and order type xxx?
    Regards,
    SK

  • Sales order quantity is to be changed

    After MRP run, if Sales order quantity is to be changed than what implication will planned order have in next MRP run?

    Hi,
    If we change the sales order quantity, then there will not be any change in planned order unless we take MRP . After MRP the old planned orders will get deleted and new gets created with the new quantity in the sales order.
    Please maintain the run time parameter as "Deleteand Recreate "
    Regards
    Amit Parkhi

  • Open sale order quantity in VA05

    hi all,
    can anyone please tell me the function module or bapi or Table to find out open sales order quantity coming in VA05.
    regards.

    First of all define what is open , is it created but notdelivered , or delivered but not invoiced.
    The table VBUP has flags for statuses eg
    A     Not yet processed
    B     Partially processed
    C     Completely processed
    A for open , B for partial C for complete , so by checking this table you will find which are actually delivered or invoiced completely.
    Tcode V.02 gives u this option.

  • Open Sales Order quantity & value

    Hi,
    We have a requirement here of report to show open sales order quantity & value for any month (monthend). There is a datasource 2LIS_11_V_ITM which gives Open order quantity. I have created an ODS with 2LIS_11_VAITM & 2LIS_11_V_ITM which can give me desired qty & value, but only for date of last data upload and not for date in the past.(and to get that, I have to sumup all open orders quantity without using any date filter)
    I am thinking of creating a Infocube over this ODS to update the Open Order qty & value at the monthend (Snapshot scenario). But to update this, I am not able to get the logic for date to be used in time dimension.
    If anyone can think of the solution or any alternate way to develop this kind of report, your help/suggestions are most welcome.
    Thanks,
    Vikram.

    Hi Vikram,
    Find the link, which solves u r requirement
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/arobustdesignofopensalesorderdataflow
    Thanks & Regards
    Ramakrishna Kamurthy

  • Open Sales Order Quantity

    Hi,
    Does anyone know what table & field is the open sales order quantity stored?
    Thanks.

    Hi Marc,
    U can get the open order quantity like this.
    First go to VBFA table. Give sales order number, item and document category as J(for delivery) in the fields VBELV(Preceding sales and distribution document), POSNV(Preceding item of an SD document), VBTYP_N(Document category of subsequent document) respectively. If an entry exist then that means the order has subsequent document created(Delivery in this case). If not  then that order is open.
    if it is open order then u can get the quantity from
    VBAP-KWMENG.
    Here subsequent document to the order depends on customization of ur system. In general subsequent to order will be delivery. But there is a possibility to have other than delivery as subsequent to order. So contact ur functional for more inputs on this.
    Thanks,
    Vinod.

  • Sales order not shown in MD04 and product view

    Hi All,
    Sales order is created,but its not showing in MD04 and RRP3,The material type is X0.
    I checked the status of the sales order that is blocked for authorization,Is there any other reason for this.
    Regards,
    Prabhu

    Hi,
    In the sales order, please check the item category in the schedule lines.
    If the item category is CN, then you cannot see the requirements in MD04.
    The item category is determined from the MRP type set in the material master. Since it was ND earlier, the Item category  in the sales order became CN.
    Had the sales order been created after changing the MRP type, the Item category would have been CP and you can see the requirements in MD04.
    You can change the item category in the schedule line to CP and the requirements will be transferred to MD04.
    Once they are in MD04, they would automatically come to RRP3, provided the material exists in the active integration model.
    Regards,

  • Purchase Order quantity must not Exceed Sales Order quantity

    Dear Experts
    My requirement is when i am creating PO in me21n and taking Document type as Domestic PO and giving account assignmnet as "C" Sales Order, must have to enter Material and quantity and must have to Give Sales Order number and item no in account assignmnet tab , the quantity i am entering in PO must not exceed my Sales Order quantity that is my requirement.
    Regards
    Abi

    Hi,
    You do not create a PO with reference to sales order. In PO you enter sales order number for reference. A purchase requsition can be created directly from Sales order or through MRP depending on the system settings. Then this PR can be converted to PO. here you can restrict the quantity. As in order to change the quantity in PR also you will have to change the quantity in sales order.
    Regards
    Raj

  • Sales Order quantity Must not exceed Purchase order quantity

    Dear Experts,
    My requirement is when i am creating a Purchase order giving referenece as Sales Order .. system must not allow the user to enter  more than Sales order quantity.
    Ex : Sales Order 1234
            Material : AAAA
            Quantity : 100
    while creating a Purchase order for Mat AAAA giving  reference of Sales order i.e 1234 and quantity 150 system must not allow user to enter more than sales order quantity . If user wants to create PO for 150 he must have to ammend the sales order from 100 to 150  is it possible.
    Kindly do the needful
    Regards
    abhi

    Dear Abhinav,
    First of all, Purchase Order will get created with reference to Purchase requisition (T. Code: VOV7 --> Item Cat.: TAS --> Tab: Transaction Flow --> Field: Automatic PO Creation), and not with reference to Sales Order.
    This is Purchase requisition, which gets created with reference to Sales Order; based upon settings in:
    T. Code: VOV6 --> Schd. Line Cat.: CS
    Order Type            NB    Purchase Requisition
    Item Category         5     Third-party
    Acct Assgt Cat.       X     All aux.acct.assgts.
    Now, coming to your requirement (based up on my inputs),
    My requirement is when i am creating a Purchase order giving referenece as Sales Order .. system must not allow the user to enter more than Sales order quantity.
    To Restrict Purchase requisition quantity in PO, then in T. Code: OMCQ
    Or, Path: SPRO > img > MM > Purchasing > Environment Data > Define Attributes of System Messages
    Here make following messages as Error;
    06 076 Materials of requisition & item & alr. ordered in full
    06 254 Order quantity greater than requisition quantity
    Now,  in Purchase Requisition, if it is created for 100 qty (with ref. to Sales Order) and if you adopt the same in Purchase Order and try to change the qty to 150, then system will not allow you change and throws the error.
    Best Regards,
    Amit

Maybe you are looking for

  • ABAP HELP in Start routine

    Hello everybody, I have written a code to delete some records in start routine, we are using BI 7.0. here is the code, TYPES: BEGIN OF tys_SC_3, TCTUSERNM TYPE /BI0/OITCTUSERNM, END  OF tys_SC_3. DATA zz_s_SC_3 type sorted table of tys_SC_3 with uniq

  • Cluster with shared domain folder using OCFS2 and the domain /tmp folder

    I've setup a cluster with two machines and one managed server on each machine. One of the machines also hosts the admin server. Initially, both managed servers were running on the same machine. Everything worked well. When I move to having two machin

  • Can't install perl modul DBD::Oracle with XE

    Hello, I have installed oracle 10.2.0.1 XE and want now install the perl modul DBD::Oracle. After running perl Makefile.PL I get the message: Unable to locate an oracle.mk, proc.mk or other suitable *.mkfile in your Oracle installation. (I looked in

  • [SOLVED] missing required signature

    i am not sure this is the right forum but i do'nt find a better one. i had a power failure during kernel update and i can't login. i chrooted from fedora 17 installation disk and tried pacman -Syu and i got this error (40/40) checking package integri

  • Reformatting PC, How to keep the checked files?

    So this is my problem: I'm going to reformat my PC, and I want to keep my itunes library. I know that all I have to do is copy the "itunes" folder in my documents and the itunes will automatically recognize the files. However, i have plenty of unchec