Sales-order-related mass production

Dear all:
Our client has the following bussiness scenarios in PP: sales-order-related mass production .
So in costing configuration , I use the valuated sales order stock, and not let the sales order item carry the revenue and cost .
So I I haven't actived the "sales order" in okkp, and also make the filed "consumptiong posting filed "in account assignment category "blank", and in the "valuation filed" in "requirment class " I maintained "M", and I want to use the sales order item cost estimate value as the standard price , but when in testing , after run MRP and convert the planned order into the production order, the error occurs " You cannot make an assignment to make-to-
stock.", so my question is that, in sales-order-related mass production, can we following in the such process:
1 create sales order
2 run mrp and generate the planned order
3 convert planned order to production order ?
by the way:
The material 's material type is "KMAT", and strategy group is "25", and requirment class is "46"
and I use the "valuated sales stock".
Thanks a lot.

Dear,
Have you  refered OSS  Note 723180?
The MRP generates planned orders to meet the requirements.The KZBWS is copied from the requirement to the planned order which should meet the requirements.During the subsequent conversion planned order -> Production order, the 'Goods receipt, non-valuated' flag is set unrequiredly.If you created an MRP run manually and if the account assignment was carried out to the project, the KZBWS would be set as account valuation filedin "requirment class " if I maintained "M".
You should set Customizing in such a way that both the requirements class of the sales order and the used material same valuation indicator. For the sales order, it is field V_T459K-KZBWS. During the creation of production order it is found that the account assignment on the sales order . Afterwards the order can be saved and a goods receipt can be posted to the sales order stock.
Or other way is Configurable materials that are also made-to-stock must have a configuration valuation in the material master record - therefore they must be maintained as a variant (storage type). In this the material itself can be referenced as a 'configurable material' (variants and 'configurable materials' with BOMs are then one and the same material).
Regards,
R.Brahmankar

Similar Messages

  • Product cost collector for sales order related production

    Hi Friends,
    This is Azam and here i am new to this discussion forum.
    we are in situation that use diffrent variant for configurable material in sales order related production,
    I would like to have some information about use product cost collector for this kind of sales order related production,
    also I want to know difference between prelimanary cost estimate or cost estimate for sales order?
    Please co-operate me.
    I would be highly appriciated if you can respond at the earliest.
    Thanks
    Azam

    Hi,
    Here, for each sales order item, you will have sales order cost estimate. This enables the system to compute the variances once the actual costs are booked against the production.
    In the case of preliminery cost, we get the preliminery cost for production order as a plan cost and is not being used for the computation of variance but only for comparision purpose which is very marginally used.
    Trust this helps much and do encourage our efforts!
    Cheers!

  • How to compare sale order bom and production order bom.

    i would like to provide report with respect to comparation of sale order bom and production order bom, but i am not familiar with SD and PP, can anyone give me some clue? i only know sale order bom is created via 'CS61', afterwards run mrp to get production order, the process appears complicated, i needn't know the process detail, just want to know how to get sale order bom and relative production order bom. please guide me.

    Hi,
    Check Tcode:CS14 to SD/PP BOM's
    Chidambaram

  • Sale Order close - Mass

    Hi! All
         Can anybody say me how to close the sale order in mass.
       I have some 1000 of sale order how to close the sale order in mass.
       if the deliveries relating to the sale order has been closed shall we close the sale order directly.  if so how to do it.
    Thanks and Regards,
    Kv

    Hi KV,
    Close the sales order by using MASS transaction. select the object type: BUS2032(sales orders) and execute. In the tables tab select the sales order header data and in the fields tab select Rejection reason and execute. In the next screen give your sales order( first save in all the orders in an excel file and upload) and execute. select sales order item data and put your order rejection reason and click on " carry on mass change" icon. The data will be changed and if there are any errors they will be reflected in the error log.
    regards
    prasad

  • Generate Sales Orders in mass based on Marketing Campaign (CRM 6.0)

    Hi Support,
    I want to generate sales orders in mass through marketing campaign
    I have done the following customizing :
    - create a new transaction type used for the Template : sales order template ZSOT and assign to it template type "D"
    - assign item categories to this new transaction type ZSOT
    - enter as communication medium for the channel : the sales order ZSOM that I want to be created in mass (based on the Template)
    - copy control between the 2 transactions : ZSOT and ZSOM
    - copy control between the item categories
    - Then I create in the Web Client UI, a sales order template ZSOT with material and quantity
    - Then I create a marketing campaign and choose as communication medium the sales order and assign the sales order template ZSOT previously created
    - I assign a Target Group to the Campaign
    - I release the campaign
    - I start it to execute it
    => I obtain the message : "To generate sales orders products and quantities have to be assigned."
    However the Sales Order Template contains a product and a product quantity
    Any idea how to solve the issue ? Is there any step missing on my customizing
    Thanks for your help !

    Dear Thomas,
    I have the same problem which you have explained in your thread and i have done the same settings that are mentioned by you.
    Even i have tried all the possibilities to get rid of this error but i am unable to resolve this problem.
    As per your inputs i have inputted the product in a Campaign but there is no option for entering quantity.
    The error i am repeatedly getting is "*To generate sales orders products and quantities have to be assigned* upon executing the campaign.
    I appreciate your earliest reply.
    Many many thanks in advance.
    Rajendra

  • MTO(Diff between complex make to order and sales order based mass prod)

    Hi
    We are using MTO...Can anyone tell me what is the Diff between complex make to order and sales order based mass prod in finance perspective?

    Hi,
    In the case of complex make to order scenario, through MRP, the Project shall be assigned to the sales order. Then there will be milestone billling and all. In the case of mass production MTO, it is only creation of production order for each sales order item and each sales order item shall have sales order cost estimate.
    Trust this helps much and do encourage our efforts!
    Cheers!
    Edited by: Ashok Singh on Oct 28, 2008 6:53 PM

  • Sales order field in production order

    Hi Gurus,
    I see there is a field sales order assigned to production order. In my scenario when we create a sales order production order gets created automatically in background due to the strategy group. So in production order, i see a field sales order and also i can see the sales order number in that field which is fine.
    But when we create a sales order with reference to quote, then in production order i see the quote number displayed in sales order field in the production order.
    My client wanted to have sales order number rather quote.
    Please suggest.
    Thanks,
    Quantum.

    Hi,
    Please note that if sales order stock has already been assigned to a quotation, the stock of the resulting orders is also managed under the quotation number.
    If you require to tag the sale order no to the production order then define the requirement type not as the make to order. This you can control at item category level also. While for sales order make requirement type make to order related.
    While doing so please note that you have to use the special rule to determine the requirement type which will based on the item category and mrp type.
    Hope this will help you.
    Thanks and regards,
    Atul

  • Sales Order Conversion to Production Order

    Dear All,
    I am from SD and have a doubt reg SD - PP ...
    If i have 3 sales orders and each sales order has 3 line items. Now i need to make a production order --- the production order to have 1 line item from each sales order so in all 3 production orders for the 3 sales orders and each production order has 3 line items and each line item is from diffrent sales orders i.e as above 3 sales orders.
    is it possible and how ?
    I am awaiting for a suitable solution ASAP...
    Thnks
    krishna

    Hi,
    In PP always 1 production order is for only 1 product ( if no co-product is added in BOM).
    In your scenario, If the PP settings & master data are maintained perfectly.
    System will create 9 production orders ( this may vary with respect to the lotsizing procedure used).
    Reward points if useful
    Thanks & regards
    Mahesh babu
    Edited by: Mahesh Babu MG on Jan 30, 2008 7:19 PM

  • Sales Order Text to Production Order Text

    Dear Experts,
    When creating a sales order in VA01, I added in some comments in the item level Texts tab.
    How can I configure the system so that when a production order is created from this sales order, the comments entered in the sales order will be automatically populated in the Long Text tab of Production Order header.
    This is because during the creation of sales order, there may be certain comments and/or instructions that need to be passed to the production line. We want the texts to flow through to the production order automatically.
    Any ideas?
    Thanks in advance.

    Hi,
    The problem is solved.
    In SD side, there's a transaction VOTXN. Change the configuration for Sales Order Item.
    Add a Text ID 0006 (Production Memo) in Textprocedure with Access Sequence 21 (Material Sales).
    In Access Sequence 21, map Text Object VBBP (Sales Order Item Text) to ID 0006 (Production Memo).
    Save it.
    When you create your sales order, in the item text level, you'll be able to see an additional text type of Production Memo. Enter your text here and save the sales order. When production order for this Sales Order is created, Production Memo tab will automatically appear (as mentioned by Peter earlier).
    Thanks.

  • Sales orders asignment to Production order

    Hi,
        I need the following requirement,
        I have 4 sales orders which has different delivery date. I want to have a single production order for these 4 sales orders (I am using strategy 40 and collective requirement option in MRP 4 view), My requirement In production order assignment Tab which sales order will be assignment, If not how can I arrive it, Is there any User exit for this?
    Br,
    Muthamil Murugan.G

    Dear Murugan,
    Your strategy 40 will not have sales order reference. But sales order quantity will be considered by strategy 40 and your PIR'S will be reduced. but you cannot have any sales order reference in the production order. If you want sales order reference in production use strategy 20, 50, or other MTO strategy and use t-code CO08 to create production order giving sales order number. And combining of many sales order into one, as per my knowledge it is not possible in standard SAP but you can have a single delivery of many sales order. 
    check the below link:
    Combining Multiple Sales Orders into one Sales Order
    combing multiple sales order into one delivery - help needed!
    Hope it will help. Revert back for more clarification.
    Regards,
    Alok Tiwari

  • Creation of IBase with reference to sales order for Configurable product.

    Hi Experts,
            Can any one tell me How to create Ibase with reference to sales order for Configurable Products. I know we can create this using IB63, but what i need to do in this Transaction code and what settings i need to do in SPRO.
    pls send ur replies to [email protected]
    Thank you..

    Hi
      You can create IBase using T-Code-IB53 and in there you can give Parent and child products.
    A)Define Installed Base Category and Installation Rules-CRM
    B)Define Object Families
    C)Define default settings for equipment replication
    D)Define Serial Number Profiles-ECC
    E)Txn BF31-ECC
    F)Set up attributes for individual objects
    G)Set up set types
    H)Set up category
    I)Set up views
    J)Allow reference product for IO
    I hope it helps
    If you require further help let me know.
    Cheers
    Raj

  • Updating Sales Order no in Production Order

    we have csenario for Sales Order :  Inquery - Quotation - Sales Order .
    In PP we have MTO scenarion . when i run MRP and convert the plan order to Production Order , in place of Sales Order it was updatin Quotation in Production Order .
    we have checked SD config for sales doc Item category =TAC and in Material Master we will used Item Category = NORM
    Please suggest is there any other setting for updating Sales Order no in Production Order .
    Thnx.

    Hi,
    I assume that you are using the strategy 20 (MTO). Go to OVZG here select the class 040 Indiv.cust.w/o cons., keep BLANK for account assignment consumption and rerun the whole cycle and check.
    Thanks
    Hrishi

  • Difference between sale order Costing & Standard Product Costing

    Hi experts
    I wanted to know Importance of Sales Order Costing & standard Product Costing.what are the benefits of these.
    Regards
    Sandeep patil

    Dear Sir,
    we are implementing SAP in packing industry. In packing industry in PP Bill of material is frequently change, for this we are implementing sales order costing.
    We are doing the following things,
    1. we are doing the inquiry at that time we are doing unit costing.
    2. On the basis of inquiry we are preparing the quotation. the unit costing done in inquiry flow to the Quotation because we r preparing the quotation with reference to inquiry.
    3. Similarly we are preparing the sales order based on quoation and unit costing data flows.
    4. Now when we run the MRP it doesnot explode the unit costing material requirement.
    Please tell us how the unit costing material data will flow to MRP run.
    Please reply.
    Regards,
    Bhadresh

  • Deleting Open sales order - in mass

    When i checked VA05 , I found many open sales order over a period of time.I want to know whether any method is there to select some sales orders from that list and delete them in mass ie at one stretch.

    Hello,
    Please use the search option at SDN forum and do not post the repeated question !! Please refer the following link for detail information !!
    [DELETING OPEN SALES ORDER|Re: Mass sales order reject/delete]
    [LINK|http://sap.ittoolbox.com/groups/technical-functional/sap-log-sd/mass-deletion-of-sales-order-1201141]
    Regards,
    Sarthak

  • Copy variant characteristics from Sales Order/Item to Production Order

    Dear All,
    I have a requirement wherein I have to copy variant characteristics fromSales Order/Item to Production Order. In this regard I was looking at Enhancement "CLFM0002". Is it possible to copy the variant characteristics automatically from the Sales Order/Item to Production Order?
    Thanks,
    Pravat.

    Pravant,
    If you are implementing Variant Configuration, or using configurable material in that case you will have to maintain
    Characteristics in CT04
    Classes in CL02
    Configuration Profile CU41
    The material that you are mentioning must have class and charcteristics activated or mentioned in material master. undre classification view. In production you maintain Configurable material BOM  we will be using the same material
    Regards
    Sathya

Maybe you are looking for

  • Project management tools

    hello all. im curious as to what other people are currently using for project management, wire framing, versioning, etc in their development environment. we are a coldfusion mx7 shop w/ ms sql. our applications adhere to the MVC structure and modeled

  • Number of records in a block

    I have to know if a block has records to enable a button to run a process. I tried to use something like this: declare cnt number := 1; begin go_block('my_block'); first_record; while :system.last_record = 'FALSE' loop cnt := cnt + 1; next_record; en

  • Front Row - DVD - Widescreen

    Hi All, I just bought a new Mac Mini (Intel Core Duo) and i am having trouble getting widescreen movies to play in widescreen in Front Row. I have managed (using the Video Zoom function) to get them to play in DVD Player, but even though I have saved

  • Update delivery with material and quantity.

    hai abap gurus,       My requirement is to create a sales order and create a delivery with sales order reference.       I done both.But now i want to  update my delivery with material and quantity.       Is there is any bapi or function module.      

  • Attach files in email

    when I opens my mail account in browser I cant find any attachment options how do I attach my files from there.is it the phone bug??but when I opens the email from hub there is available the attachment option.then why not I see in browser. Solved! Go