Sales order while MRP run

Hello friends;
My requirement is such that when i run mrp in MD02, system should not consider those sales order that are planned in previous MRP run. System should consider new sales orders that are created after MRP run.
Waiting for reply.
Thanks.

Hi,
One solution is go for individual Sales Order/Line Item MRP run using T.code MD50.
But I can't understand problem with use of MD02.If Receipt element(Plan order)is there which contains the Account Assignment of that Sales Order line Item then I don't think system will replan for same Sales Order Line item.
Regards,
Dhaval

Similar Messages

  • Creation of production order while mrp run

    hi
    ppgurus
    can any body explain how to create a production order by mrp run
    ie
    sysytem should create the production order directly while mrp run not PLANNED ORDERS
    what settings i need to do for  this plz explain
    urgent requirement
    regards
    sasikanth

    HI
    you gave a good way to solve the problem
    if it is a make to stock REM
    i  need not convert planned order to production oreder right
    plz suggest in  that scenario where i need to  do availability check
    in REM for which oder type (say PE IS STANDARD)
    to be assigned for availability  check
    plz suggest because in spro (t -code opjk) at order controll
    i dint see the order type PE
    the order controll (opjk) in discreet  :- avialability checking rule assigns
    in which setting this setting to be done in REM

  • MRP Type V1 does not consider Ext. req. Sales Order after MRP run

    Hi Buddies
    My client wants to use MRP Type V1 which should consider re-order point as well as external requirement (i.e. Sales Order) for net requirement calculation.However when i tried using V1 in material master and ran MD03 it only considered re-order point  and ignored Sales Order.Sales Order didnt even reflect in MD04.Moreover in OMDQ for V1 under additional ext req there is no Sales Order for selection.
    Please reply how i can have ext req sales order for MRP Type V1.
    Regards,
    Sachin Narvekar

    Hi
    MRP Type V1 creats the requirement when the need exceeds the Reorder Point, where as the MRP type VB creats the requirement when the stock qty goes below the reorder point.
    Regards

  • Sales order with MRP run but no need of sales order stock while PGI

    Dear Gurus,
    We have scenario in company that we want to run MRP for sales order & generate requirements. But while doing post goods issue for same sales order, sales order stock need not be present.
    Please tell which planning strategy, strategy group or else should be used here.
    Thanks in Advance !!
    Thanks,
    Vishwas 

    Hi,
    Please configure in the following manner..
    create a strategy group say Z9..in this maintain main strategy as 20  and alternate strategy as 10... Now assign this strategy group to material in material master in MRP3 View..
    Now create sales order say A and run MRP with MD50..after completion of production you will get Sales order stock.. now convert this sales order stock unrestricted use stock..
    Now before you are doing PGI for sales order A... go to sales order change VA02 and change the requirement type to KSL from KE and then system will all you to do PGI with unrestricted use stock...
    Thanks
    Kumar

  • Process order required for each sales order without mrp run

    Hi, it is mto scenario. wants system to create a process order for each sales order without running mrp. please advise is it possible? if possible please guide what settings need to be done. Thabk you.

    HI
    You can create production order with reference  to sales order using t code CO08.
    Check and revert
    Regards
    Anupam Sharma

  • Sales order to MRP Run

    Hi friends
    How to configure MRP run for sales orders.
    Thanks in Advance
    Rheya

    Hi
    In order configure MRP for sales orders, check on Transfer of Reqirments on the net or check for the same in Gylence book for Sales and distribution
    Few settings for the same are as follows
    In t code OVZI
    img-sd-basic functions-availablity check and transfer of requirements-transfer of requirements--determination of requirements types using transaction
    In this img activity we assign requirement type to the combination of item category and MRP type
    I hope this is what you are looking for
    In t code OVZI if you go the details you should give the source as 1
    Then only it will pick up
    This is the pick up strategy
    In t code OVZI requirements types are assigned to item category and mrp types
    In t code OVZH requirements types are assigned to requirement class
    In OVZG we define the controls for requirement class

  • Steps for sales order to MRP Run

    Dear all,
    Could you please explain what are the steps to process after creating sale order to run MRP and delivery?
    Regards
    Rajasekaran

    Hi Rajaseshekhar,
    Following will be detailed end-to-end process steps.
                     Create Sales Order Entering Finished Goods Material
                     Master
    Auto Generate Alert(E-mail) to Production Planner
                    Create ‘Order BOM’ by Copying Finished Goods BOM (Sales
                     Order Item). Amend by deleting/adding Items in Order BOM at all levels
    Auto Generate Alert(E-mail) to Product Cost Controller
    Recalculate 'Sales Order Costing' to reflect changes to ‘Order BOM’
    Auto Generate Alert(E-mail) to Production
    Run Sales Order MRP
    Convert Planned Order to Production Order
    Capacity Leveling
    Release Production Order
    Pick Components (Picking List)
    Confirm Assembly Activities
    Post Goods Receipt (Production Order)
    Delivery Processing for Sales Order
    Create Invoice
    Hope ite helps,
    Jatin

  • Acknowledgement of Sales order numbertfor MRP run To PP  from SD

    How PP will come to know about sales order number acknowledgement which created by SD in MTO scenario.
    what is standard solution for it.
    thanks!!!

    Winni,
    My first answer would be to discontinue the use of these dupe orders.  I will assume that you have already explored and rejected this solution.
    MRP gets SD quantity and Date info via 'Transfer of requirements'.  Depending on how your SD system is set up, you transfer requirements at the Item level and/or at the Schedule level (IMG>SD>Basic Functions>Availability check and transfer of requrements>Transfer of requirements).
    It is possible to define your SD Items such that they automatically determine a requirements class that does NOT transfer requirements to MRP.  Likewise you can define a Schedule line category that does not transfer any schedule line requirements to MRP (IMG>SD>Basic Functions>Availability check and transfer of requrements>Transfer of requriements>Define procedure for each Schedule Line category).
    Any changes you make must be consistant with all of the existing SD Doc types, SD Item Categories, and SD Schedule line categories, as well as your existing company policies and procedures.  I couldn't possibly make any recommendation without fully auditing your system, and fully understanding all of your business requirements..
    I suggest you get your local SD functional expert to work with you to configure your system to meet your
    needs.
    Rgds,
    DB49

  • Partial allocation against sale order during allocation run

    Hi Experts..
    How to do allocation run for partial quantity against to the particular AFS sale order while doing allocation run process in J3AT.
    Example :
    I have sale order stock 10 qty. but I want to do allocation run for 5 qty. So that I can make partial delivery for this 5 qty alone. So please suggest me how to do partial allocation run.
    Thanks in advance
    Regds
    Prabakar

    Hi,
    You can try TCode V.00
    This transaction when executed will give you the list of all the sales documents blocked for delivery per sales organization. There are various other criteria which might be useful. This transaction will allow you to edit each sales document.
    If this is not the one that you want, then perhaps you might have to develop one.
    Thanks
    Mukund S

  • No sales orders with MRP-relevant requirements were found MD04

    Hello MM Enthusiast,
    We are in process of EHP upgradation and I need to replicate the following error message,
    No sales orders with MRP-relevant requirements were found
    Error message MF 336
    Please let me know how to get the above message in S environment.
    I have gone through the already discussed thread (http://scn.sap.com/thread/3460655) but couldn't able to get the message MF 336.
    Based on your response I can replicate and apply the causing / resolving note given by SAP AG.
    Looking forward to your valuable input to proceed further on this issue
    Cheers,
    Kumar S

    This issue was solved using a different availability checking rule in MRP3 of the material master.
    the old checking rule  had a requirements summary, while the new was for individual requirements, this setting is defined in OVZ2 customizing transaction.
    Hence you need to enter a checking rule in your material master which has a A as sales requirement in OVZ2.
    then create 2 or more new sales orders for this item for the same delivery date.
    After that you should get the error in MD04

  • How to bring in the Open Sales Orders while performing Sales Order Conv

    Hi,
    Could you give some suggestions on the below:
    How to bring in the Open Sales Orders while performing Sales Order Conversion in R12.
    Thanks
    Pravin

    See http://ramugvs.wordpress.com/2011/08/27/how-to-stage-and-import-an-order-using-order-import-api-apps-wms-ebiz-11i-r12/
    Sandeep Gandhi

  • Change a sales order while delivery

    Hi Gurus,
    I need to change the status of a sales order line item from being complete to incomplete in case it fails some validation during delivery creation.
    I was earlier planning to code this in the copy-control routine ( order to delivery)  and use the standard FM BAPI_SALESORDER_CHANGE in the copy control code to attain this, but however, the sales order cannot be edited when being delivered.
    Is there any other means of attaining this. Backend update of tables can lead to a couple of challenges and undesired behavior that I want to avoid.
    Regards,
    Jasmit

    Dear Jasmit ,
    As Regards to the Change a sales order while delivery.
    There will be 2 Approaches for it
    1. Firstly use the User Exit SAPMV45A.
    2. Use the Enhancement V45S0001/V50S0001/V50R0004
    This will definitely help in your requirement .
    Regards,
    Saurabh Goel

  • While MRp run which time is taken into consideration(from PIR or from MM)

    Hi PP gurus,
    When we run MRP which time is taken into consideration for a bought out material :
    From Material Master ( Planned delivery time)
    or
    From Purchase Info record : the delivery time mentioned in the PIR ..
    In my case the MRp run is showing 2 different results in different systems for the same material.
    Also please let me know that if there is any priority that can be set in SPRO for picking up the time while MRP run and what takes priority and when.

    Hi!,
    If you are getting two different values after MRP in two different systems then please check:
    1.  whether any other info record exist for the same material in any of the system.
    2. Have you maintained source list in both the systems for the material. How many sources are defined in the source list and in what sequence. If you have not maintained a quota arrangement then system will take first line item of the source list.
    You can't set the priority for the planned delivery time but you can set whether system should take planned delivery time from info record or not in IMG setting Material Management > Consumption based Planning > Planning > Procurement Proposals > Define External Procurement. To use the planned delivery time from info record you must maintain a source list for that material with same vendor. Also make that source as MRP relevant.
    Regards,
    Uday

  • Production orders in place of planned orders in MRP run

    Hi,
    Please help me with this senario,
    we receive saleorders through CRM interface then these are chnged to redistribute to different plants by changing the plants in saleorders.
    we want to run and create production orders directly for these saleorders without creating planned orders.
    I tried using strategy 82 but it makes the production order online, but we want it to be created after mrp run.
    Is there a way to create production orders instead to planned orders in MRP run.

    Hi You used Right strategy only.Use Strategy '82',  Transfer requirement from CRM and execute MRP run in Background.It will generate Production order.But i didn't understand what you mean by 'Online' 3
    Pl.  Correct me If I am wrong.
    Edited by: Velmurugan S on Mar 4, 2008 10:02 AM

  • Ignore the number of schedule lines in sale order item when run MRP

    Dear All,
    I have a problem when I create production order (discrete manufacturing)
    When I create a sale order with one sale order item and 3 schedule lines for this sale order item.
    After that, I run MRP for this sale order, what I get is 3 planned orders for 3 schedule lines. It means that I will have 3 production orders for 1 sale order item.
    I want  create one production order for one sale order item whatever the number of schedule lines in sale order item.
    I think I have to config in MRP. Please help me.
    Thanks in advance

    Dear
    Check in OPPQ then look in Master data Availability Check & strategy for material also check whether u have maintained strategy for same material and see did u extended sales views for other material
    As u said 3 schedule lines for this sale order item check whether u have extended sales views for next material
    With Regards
    Pushpalas

Maybe you are looking for

  • G4 and ScanMaker 4

    I'm about to inherit a Microtek Scanmaker 4 and will hook it up to my G4 if I can get the scanner fixed. I wondered if anyone knows where I can get a diagram on the scanner that illustrates how to take it apart and a parts list. There doesn't seem to

  • Macbook Pro water damaged, have I lost my purchased apps?

    A drink got spilt onto my Macbook Pro the other night, for enough time to soak into the keyboard and I'm guessing damaging the internal harddrive. Unfortunately nothing was backed up but the good news is I have accidental damage insurance. Is there a

  • User lock

    Hello experts,                        How can we lock all users leaving the standard users like DDIC SAP* EARLYWATCH and SAPCPIC.          without using SU10. regards, kavitha

  • DLL in Installer einbinden funktioniert nicht richtig

    Ich habe in meine LabVIEW 8.6 Anwendung eine externe .NET-DLL eingebunden. Dies funktioniert soweit auch wunderbar. Diese DLL liegt mit in meinem Projekt-Verzeichnis und ich habe sie auch in die Projektstruktur aufgenommen. Wenn ich nun eine Applikat

  • Is it possible to have a multiple FPGA cRIO system?

    I am curios if it's possible to have a single cRIO chassis that can be expanded with additional FPGAs for computations. Meaning, I don't need more I/O but I do have algorithms taking up too much space and need a secondary FPGA to do some parallel pro