Same Mac, connecting to two different networks, one by Ethernet, one by Wi-Fi. How to see both networks at the same time?
On this Mac, I have access to the company network (and Internet) via the Ethernet port (gateway 192.168.1.1).
At the same time, I have a second (backup) Internet link via Wi-Fi, to a different ISP (gateway 192.168.3.1)
At the least, I would like to view the company network from the Finder AND access Internet via the Wi-Fi link.
I have minimal knowledge of network stuff, but if I could redirect the browser requests to the Wi-Fi link, maybe it would work?
Thanks for your help!
Oh well... just found the reply...
Changing order of the connections, putting the Wi-Fi first as it gets the HTTP first.
Don't know why, but it would not work yesterday!
Similar Messages
-
Can I connect to 2 different networks at the same time?
Can I connect a Mac Pro to 2 different subnets with either the dual ethernet port or an additional NIC?
I'm trying to create a firewall between 2 networks but still be able to copy large files quickly from one network to the other.yes that is one of the reasons for dual ethernets. If you use DHCP the ports will get necessary data at boot up.
-
My company uses the prefix "Corp" for their Active Directory domain. The domain is Corp.Company1.com, so when I log into the computer I log into it as Corp\Username.
Here is the issue I am facing: I often take my laptop to another company site (Lets call them Company2) which has been acquired by Company1. When I plug my Company1.com computer into Company2's network and try to log in to Corp\Username, I get a username or
bad password error because it is trying to log into Corp.Company2.com instead of Corp.Company1.com.
I have a large number of users who are going to start working at Company2 sites but using Company1 computers. Until these domains are joined (I consider that a separate issue), what workarounds might I be able to use to allow users to log onto their laptops
without having to unplug from the Company2 network?have your users loging using the fqdn of the domain, that will probably work just fine (provided they can access these dc's or you allow cached logons).
[email protected] or corp.company1.com\username
MCP/MCSA/MCTS/MCITP -
I have had MyWebSearch install itself as my primary browser....I have needed to reset Firefox in safe mode but I am not sure that the changes have actually been done! In Options in the Options menu the window displays all the add on's and features that are on Firefox....I have two zipped folders here One allows me to see inside the other does not. How do I access this one that does not give me the option to as I want to know what is inside...as this "MyWebSearch has been an enormous hassle...and needless to say has compromised my PC and the security of all of my passwords.....I want to be sure that the resetting the browser default has actually worked and that MyWebSearch is gone!
Regards
CocoAre you talking about MyWebSearch toolbar (http://help.mywebsearch.com/sbar2.html#q1) which offers apps such as Smiley Central, Cursor Mania???
If yes, uninstallation instructions are here - (http://help.mywebsearch.com/sbar2.html#q4). Could you provide me some details about the ZIP folders. If I get a screenshot, I can help you very well. -
How to use two different network cards on RT?
Hi everyone... I'm currently working on a project where I have to deal with the issue mentioned in the thread's topic: I have a PC with RT LabVIEW that has to be able to establish network connections using two different network cards. One will be used to connect via TCP/IP with a host computer that will show the data transmitted through shared variables; the other will communicate with another PC through Modbus protocol. The key is that each communication is done through a separate network card.
So far I haven't been able to figure out how to configure both things to happen. Does anyone know how to do this? Any tips will help.
For the RT communication I'm using a standard RT project, with the RT PC being given one of the IPs, and for the Modbus part, I created an I/O server with a master and a slave. Separately everything works fine, but when I get them together it simply won't work.
Thanks for your help!
Solved!
Go to Solution.Sorry it took me so long to answer, I've been busy lately....I've found a solution to the problem I mentioned, and just in case anyone has similar problems in the future, I'll shortly describe what happened.
As Caseyw suggested, it was necessary to enable both network cards through the Measurement and Automation Explorer. The cause of the connections malfunction was actually that I wasn't using the "right" protocol for the Modbus communication, which ran on the secondary adapter. The solution was to use the URL protocol with the correct path on the field, addressing the right IP address. To avoid making this post a mixture of topics, I won't elaborate futher, but I got the gist of it, so if anyone is having similar problems whether it is working with several network cards or with Modbus communication protocols, feel free to contact me, I'll be glad to help.
Thanks -
I am unable to connect to two different wi if at different locations having same user name but different password one is at home other at work
I was able to do a full reset on the router (pushing the tiny button near the power input). Then ran through the setup process and it started working on my device.
-
Hello,
I have two different Mac Mini at two different locations. Both systems are running Lion.
One of the Mac Mini systems connected to my iphone G4 as well as Ipad 64-Wifi, work perfect to sunchronise. ( IO5 is present)
I would like to run the changes i made with cloud to the other Mac mini system, but this doesn't work.
Any one to help me?
Tnx HansWinston, CH.
Tnx for the fast reply, but where do i find the setting for iCloud system preferences? -
11g Multiple Rpd on one BI server connecting to two different data marts
Hi
Did anyone tried and successfully implemented multiple rpds on one bi server. I have similar requirement in one of the clients place.
1. Install OBIEE 11g with vertical scaling( reason client doesnt want to spend extra money on additional server licenses) and would like to utilize the powerful existing servers.
2. Install 2 rpds on One BI Server and connect to two different datamarts.
3. Create two PS and provide two links to have two different reporting environments.
Appreciate with any pointers. I am very clear on Vertical Scaling and bumping up the Bi , PS and Java Hosts components. I saw a post with successful implementation of the same functionility in 10g and nothing in 11g. I already reviewed ritmanmeed blogs but did not give a complete picture of successfull implementation.
ThanksHi,
Yes, it is possible to have two different .rpds on one BI Server but then you need to set up two different Presentation Servers.
Refer the below threads for more information.
Re: multiples RPD in one server
Re: Multiple RPD & Multiple Presentation service instance on single BI Server
https://forums.oracle.com/forums/thread.jspa?messageID=9189677�
Can i put two rpd files in nqsconfig init file in BI Admin
Hope this help's
Thanks
satya -
JDBC connection to two different machines from the same program
I want to use JDBC to connect to two different databases that are on two different MySQL installations on two different machines.
One of the installations is MySQL 4.1.12 and the other is 4.1.14-nt
For some reason, all my statements seem to be going only to one machine, even though I am very clearly set it up to go to two different machines.
Does anyone know whether connecting to two different installations from one program presents any unusual problems?
Thanks.Unless there is some horrible defect in the MySQL JDBC driver (which I doubt!), there should be no problem and like the other poster says, please post snippits of your code so we can see what your doing...
-
Connecting to two different SQLServers present on different Locations
Hi,
How can i connect to two different SQL Servers which are at different locations in the same session? IS there any way to do this without disconnecting from the first server?
cheers,
SachinWell,
actually my problem is that im reading Database
e Properties through a file which contains multiple
database entries. And i have only one Connection
Object so if im logged into one ex SQLServer in
London, I have a class which will allow me to loginto
another database SQL Server at New York. Now how do i
keep my connection as well as connect to New York
Database Server with the same Connection Object. If
possible, I need to logoff from the Server at London.
How do i do this? Any Ideas?Redesign. You have a connection object that can only have one connection. Either you have to close that connection and reconnect to the other one, or you need two of them. Those are your choices. -
Is it possible to connect to two different clusters?
Hi,
I was wondering if it was possible to connect to two different clusters from the same process?
What I would like to do is to able to get some cache on the first cluster and others on a second cluster. The cache-config DTD doesn't seem to forbid the definitions of several remote-cache-scheme. So I should be able to map all "c1-*" caches to the first cluster and all "c1-*" caches to a second cluster...
Is it possible?Thanks,
Yes I'm connection via extend.
Could you give me an example of such configuration? I've made a test from a C++ client with the following client config:
====================================================================
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>c1-*</cache-name>
<scheme-name>extend-1</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>c2-*</cache-name>
<scheme-name>extend-2</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<near-scheme>
<scheme-name>near-c1</scheme-name>
<back-scheme>
<remote-cache-scheme>
<scheme-ref>extend-1</scheme-ref>
</remote-cache-scheme>
</back-scheme>
<invalidation-strategy>auto</invalidation-strategy>
</near-scheme>
<near-scheme>
<scheme-name>near-c2</scheme-name>
<back-scheme>
<remote-cache-scheme>
<scheme-ref>extend-2</scheme-ref>
</remote-cache-scheme>
</back-scheme>
<invalidation-strategy>auto</invalidation-strategy>
</near-scheme>
<remote-cache-scheme>
<scheme-name>extend-dist</scheme-name>
<service-name>ExtendTcpCacheService</service-name>
<initiator-config>
<tcp-initiator>
<remote-addresses>
<socket-address>
<address system-property="tangosol.coherence.proxy.address">ldnpsm020001413</address>
<port system-property="tangosol.coherence.proxy.port">4321</port>
</socket-address>
</remote-addresses>
<connect-timeout>10s</connect-timeout>
</tcp-initiator>
<outgoing-message-handler>
<request-timeout>5s</request-timeout>
</outgoing-message-handler>
<serializer>
<class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
</serializer>
</initiator-config>
</remote-cache-scheme>
<remote-cache-scheme>
<scheme-name>extend-paul</scheme-name>
<service-name>ExtendTcpCacheService</service-name>
<initiator-config>
<tcp-initiator>
<remote-addresses>
<socket-address>
<address system-property="tangosol.coherence.proxy.address">ldnpsm020001412</address>
<port system-property="tangosol.coherence.proxy.port">4131</port>
</socket-address>
</remote-addresses>
<connect-timeout>10s</connect-timeout>
</tcp-initiator>
<outgoing-message-handler>
<request-timeout>5s</request-timeout>
</outgoing-message-handler>
<serializer>
<class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
</serializer>
</initiator-config>
</remote-cache-scheme>
</caching-schemes>
</cache-config>
========================================================================
if I do a CacheFactory::getCache("c1-Test"), the log shows a connection to the 1st cluster
if I then do a CacheFactory::getCache("c2-Test"), the log shows a connection to the 1st cluster and not to the second cluster
What did I do wrong? -
I have a problem with my iPad 1 st. the problem is that I unable to locate even when connected to a WiFi network and the location is activated and restore and same thing happens .. may be I need help!
Thank you ...!Hi there beni_m,
You may find the troubleshooting steps in the articles below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes
Hi Gilly,
I have no proof, but I think it will not work with an adapter, only Mini Display Port or Thunderbolt. -
I have two iPads and one apple ID. How can I FaceTime to/from each iPad without creating a new apple Id. Anyone know a way around this I.e trying to FaceTime 2 IPads that have the same apple id associated with them?
Have a look here...
setting-up-multiple-ios-devices-for-messages-and-facetime.html -
Sorry, I was not given the option of posting to a Maverics community. I have 4 accounts on my Mac Pro running Mavericks. From one account I can scan with my Epson NX420, but the other three accounts do not see the scanner. Can print from all accounts.
Hi there Ira Fletcher,
I would recommend taking a look at the troubleshooting steps found in the article below. Note: While the article was written for printer issues, many of the same troubleshooting steps apply to scanners as well.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
-Griff W.
Maybe you are looking for
-
What's new in version 6? Why not version 5.0.2 or 5.1?
Why all the new versions? 4 was out for a brief time, 5 has been out for just as brief... So what IS new between 5.0.1 and 6? Why should I upgrade? By the way "more awesome" isn't a valid reason.
-
Hi there, I just started a new job for a small company which has a VERY messy BW install. The landscape has 2 boxes BWD and BWP both of which are connected to R/3 production. It seems that my predecessor was a bit lazy with his transports and as such
-
How do I organize a document for users to download from my site?
I need users to be able to download a pdf from my site. I have dragged and dropped a (one page) pdf into a picture frame and I want users to have the ability to download this ... or any other multi-page pdf. Can anyone help with this? Thanks. Andre
-
Where is apps file sharing located on itunes
itunes locate the apps file sharing on itunes
-
Confirmation about status of a file right after closing the file
I would like to know when to open a file such screen shot of file on Desktop and then close it. The file is not activated which means I can not edit the name or delete the file immediately. Please make me the status of closing the file The file is af