Same old error message - 0x80020022

I am trying to find an answer to how I can burn DVD's on my Power Mac G5.
I have tried to follow the threads posted in the past, but they just go on for pages and apages and pages ( literally )
of one after another person chiming in that they have the problem, and isn't it time Apple address it - and no one
offering a solution.
Someone did suggest running a " repair disc permissions " , but when I open it - the CD/DVD drive is grayed out si
I can't even do that.
It will read in CD's and such, but I cannot burn to a DVD.
Someone else suggested different media - DVD+R as opposed to DVD-R, which I don't happen to have on hand or
I would try that.
I would replace the drive but am unfamiliar with Macs generally and don't want to go through the ardor of their special
case and special screws and specioal connectors ( all to replace a special drieve that unbelievably doesn't want to work )
Is there an answer to this problem that seems so prevalent ??
Thank you for any help,
Sterne

Hi
You must describe more - What You did do - to get this Error Message
• Material used as Video-Codec, Audio and Phjoto file format, frames per sec
• Video editor used
• How exported to iDVD
• DVD type of project - 4x3 or wide - PAL or NTSC
• Brand of DVD used
• Burn Speed - set or as on DVD
and much much more
My General Trouble shooting guide
When iMovie/iDVD doesn't work as intended this can be due to a lot of reasons
• iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
• Creating a new User-Account and log into this - forces iMovie to create all pref. files new and error free
• Event or Project got corrupted - try to make a copy and repair
• a codec is used that doesn't work
• problem in iMovie Cache folder - trash Cache.mov and Cache.plist
• version miss match of QuickTime Player / iMovie / iDVD
• preferences are wrong - Repair Preferences
• other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
• External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
• USB-flash-memories do not work
• Net-work connected hard disks - do not work
• iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie.
This You do by
_ close iPhoto
_ on start up of iPhoto - Keep {cmd and alt-keys down}
_ now select all five options presented
_ WAIT a long long time
• free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
• external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
• GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
• Screen must be set to million-colors
• Third-party plug-ins doesn't work OK
• Run "Cache Out X", clear out all caches and restarts the Mac
• Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
• Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
• In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

Similar Messages

Optical Drive Error message 0x80020022

I am burning data DVDs and have had 8 out of 14 failures with Error code 0x80020022, and a message about loss of communication with optical drive. Has anyone solved this problem as I see old postings in 2009?

I was able to burn a disk!!! Buy copying my target file to my computer HD instead the auxiliary HD it was on and doing the burn via the MacBook Pro disk utility. It's good to be lucky!!!

Erase old error messages of MacPro RAID Card?

Hi there.
I changed HDDs in my MacPro, they were configured as an RAID 1 using Apples RAID Card.
After mirroring the old System to the new (RAID 5) System, there are several error messages left in RAID Utility - where are they located to delete them?
Maybe I was wrong simply to change the HDDs, but is there a chance to solve that issue?
Thanks in advance.

Get someone on ebay to buy your over priced under supported card.
Or accept the 2.2TB (some people only got the 800GB portion which needs to be set as free space).
Or use 2TB drives.
Or external RAID but watch out for ATTO SAS and their Java program that doesn't work.
WD RED 3TB drives are designed for NAS RAID, firmware to support RAID TLER.
SoftRAID 4 makes a nice software RAID and does a good mirror with three drives in stripe reads (mirror only begins with minimum of two).
NO Apple just won't can't whatever offer a card and firmware. Odd with all their GUID support for large volumes isn't it.
It is designed for smaller SAS drives in today's world. And for RAID5 on 3TB and issues with battery... POS throw it up on ebay!

Unable to reset Firefox: always get the same "embarrassing error" message

Hi. My Firefox keeps on crashing: I continually get the "Firefox not responding message. "
I have tried on umpteen occasions to try and reset Firefox, but cannot. Halfway through the process, everything stops and I get the "well this embarrassing" error message.
How can I fix this?

Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Error message 0X80020022 error code when burning CD.

Does anyone have any idea what this error message is? I was trying to burn a DVD on X8 speed...
If anyone could help I would appreciate it!
Thanks
Kris

I believe it's a hardware issue anthough don't quote me on that as I'm not sure. I would call AppleCare with this error code. They'll know for sure. I would also try burning to a differnet brand media to ensure it's not a media issue. I would suggest you try Verbatim DVD-Rs.

Same Installation Error Message

I have been trying to install the newest Adobe Flash Player for a few hours now. I can download the installation program and start the installation, but it reaches a point where it stops and says the program is already in use. At this point in time, Adobe is not even on the computer anymore. I uninstalled it, to try and get around the error. What can I do? At this point in time, I can't run anything that requires Flash, because it is not on the computer and I can not download it.

What is your operating system & version?
What is your web browser?

Stop the Internal Error Message in Fireworks CS4 or CS3

About 8 hours ago I ran into what is apparently a fairly
common problem for many people using Fireworks - the error message
that wouldn't allow me to save anything. Luckily, I paid attention
in class long enough to at least know to save my work often, so I
didn't lose much - just a basic wireframe that I threw together in
15 minutes or so. Thankfully, I tried saving when I did or this
would probably be a very tearful night for me. Instead, it's just a
long night. I can deal with that.
But, before I pat my iMac on the top of it's screen and say
"goodnight" I wanted to share with you the secret to "fixing" the
error message. Hopefully this will help those poor souls in the
future who need a little guidance from someone who's been there,
done that, and is too tired to design the t-shirt. This method will
also work on Windows machines.
I'm not saying this is guaranteed to work for you, but I'm
telling you it's worth a shot. It only requires a little of your
time to do and will hopefully be the fix you need. If it's not,
please accept my sincerest understanding of your frustration and
try another method. This fix suggests that you have added, removed,
or relocated fonts on your computer since the last time Fireworks
worked properly, however, even if you haven't done any of those
things I'd still recommend giving this a try. Here's what you do:
1. Open your favorite font manager software. I prefer the
pre-installed Font Book on the Mac, but you can use any font
manager that you want. Some good commercial font management
programs for Mac include, MasterJuggler, Suitcase Fusion, FontAgent
Pro, and Font Explorer X. For Windows you might want to try, Font
Fitting Room, X-Fonter, Suitcase for Windows, OT1 Font Manager by J
M Berthier, MainType, FontExplorer for Windows, Printer’s
Apprentice, FontAgent Pro for Windows, Typograf, or FontExpert.
Those are in no particular order, just in case you were wondering.
2. select all of your installed fonts - including your system
fonts. Run your "validate font" command for the font management
program you're using. Sit back and let it work. I had more than
6,000 fonts on my Mac, so it took a few minutes to run through all
of them.
3. Your font management program should let you know which, if
any, of your fonts are corrupt, duplicates, or otherwise
dead-weight. Chances are there will be a few if you're getting the
internal error message at start-up or save with Fireworks. You need
to delete or at least remove these fonts from the fonts folder. I
had, and I'm ashamed of this, 256 duplicates and 135 dead fonts on
my poor computer. But, in my own defense, I did just reinstall many
of the fonts a few days ago and was planning to gradually work
through them to pull out the dead/unwanted ones. I should have done
that before putting them to disc last time, but no... I wasn't
thinking.
4. once you have the fonts removed/deleted that produced
errors or warnings during the scan with your font management
program you might want to run the scan one more time just to be
sure you got everything out. If everything looks good, you can now
quit/exit the font manager.
5. here's where things will seriously divide for Windows
users and Mac users. Therefore, I'm not going to fully explain
where you need to go or how to get there for this step, but I will
provide the basics. On your computer, you need to find the folders
for fireworks that contain your preferences for the program (hint,
look in the user's appdata folders, which is hidden, for Windows or
the user's Library for Mac). Inside the preferences folder you'll
find a file that houses a list of fonts, probably called fontlist
or something very similar. Delete it. You might also wish to delete
the cache for the program preferences. Those need to be regenerated
in order for this to work.
6. Find your computer's font cache while you're looking
through the massive amounts of folders and delete the file there
too for a little added security that this will work.
7. restart your computer.
8. open Fireworks and create a new file. Save that file to
your computer in whatever format you want.
If the program opened, the file saved, and you didn't receive
that same old error message, congratulations, it worked! You may
have to re-establish your preference settings, but you shouldn't
have any other problems.
That is the best I can do this evening... or morning I
suppose it would be. Best of luck to you!
-Skip

djbroklee wrote:
> i'm on the struggle still, i've done the uninstall
reinstall thing,bought a
> font manager even though i don't go big on fonts,cleared
cahces,did
> regedits,you name it.
> the fight continues.
> as far as support from adobe they pretty much don't care
they got my thousands
> already this quarter.
> i'm thinking about a system restore now, pretty much
lost out on those last
> two days of pay and now that today is about over i have
nothing to lose if i
> can't get it fixed.
> anyone have any ideas out there?
> it's too bad i committed to adobe before accepting these
adobe type jobs.
> worst case i'll do the work on mirage until i can
finally get the quick
> background drop of fireworks again.
> i didn't pay thousands but it has never even hiccupped
no matter scripts or
> tasks i crammed into it.
> this fireworks issue sort of thing is what put me off
adobe in 2000, no
> support for issues,and wonky worksmanship.
>
> anyone have the answer thow it over to me,i could surely
use the catch up on
> getting paid thing right about now.
An update is being made to address some major problems, if
you hold
tight you might find a solution soon.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html
How To Report A Bug To Adobe
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Error messages when I log on to Firefox.

I get these same two error messages ( below) when I use my FIREFOX. What is the problem? How canI fix it? Thank you.
ERORR MESSAGES:
1. --stanticate interface component!
2. Message
TypeError_EMBARQ_INST_.DTFox is defined

This can happen if you have an incorrect user agent string (identifies the version of Firefox). Some add-ons modify the user agent string causing it to show an old version of Firefox even if you have the latest version installed.
Your user agent string is "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.16) Gecko/20080702 Firefox/2.0.0.16 Mnenhy/0.7.5.666"
It is reporting that you have Firefox 2.0.0.16, but the user agent string may have been locked by the "Mnenhy" add-on
Try resetting the user agent string to see if it resolves the problem. For details of how to do that see https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser

General Error Message Won't Let Me Save

Hello,
I was editing an HD video earlier and I switched my audio/video settings to sequence preset DVCPRO HD - 720p24 - my capture present to DV NTSC 48 Khz (since im not capturing. i pulled files off an external hard drive - my device control preset was on SONY HDV FireWire. My video playback was on apple firewire DVCPRO NSTC 720x480. I opened another project and switched my user settings to regular DV NTSC. when I got back on my HD video, it showed that I needed unexpected rendering. When I rendered it gave the "general error" message. I had to select each clip that needed rendering and move it a little, then re render the selection. when I went to save the project it gave me the same "general error" message. I need to export this project to qucktime ASAP to put on a DVD. what should I do? pleeeease help......
thanks in advance.
and am I royally screwed????

sounds like you have some corruption going on, or perhaps a permissions issue (though I think that's less likely). Here are some things I'd try.
Create a new sequence with the proper settings for your footage. Copy all the clips in your old sequence and paste into the new sequence.
Create a new project with a new sequence. Copy and paste the clips of old sequence into the new sequence of the new project. Save As and give it a new file name.
Check the pathway to your Render folder and your Save folder. Make sure that permissions allow for READ AND WRITE all the way down. In other words, if your render folder is in:
Harddrive/FCP/Render
Then make sure all three have READ WRITE permissions applied. Do this by selecting them one by one and hitting CMD+I for info. Then look at the permissions.
Hopefully one of those options will help.
Andy

Got a new Mac that has Yosemite and am now getting an internal error message

I went from OS X Mavericks on my old MacBook Pro to Yosemite on my new MacBook Pro - and now Presenter Express 10 is not working. I see myself on camera and start recording but when I try to play back I get an "internal error" message. Someone else posted on 2/15 they were getting this message but it doesn't seem like it's the same issue - ? I don't even get a chance to select different views - just the yellow shows up before the error message.
The resolution is on the default of 1440 x 900, which is what Presenter's Help page says it should be at.
I have Presenter Express installed and am not using it via a subscription. I did encounter problems with Photoshop with Yosemite and had to install Java 6 plus completely uninstall and reinstall Photoshop to make it work. Am wondering if I need to uninstall and reinstall Presenter Express?
****EDIT*** If I DO have to uninstall and reinstall - I just went to my account page and although all my software purchases and serial numbers are listed I can't click to download anything. I don't see a page where I can do this for Presenter Express (although there is one for other apps). All I can find is a purchase page with the free trial option.
****EDIT***** Just tried playing back a video that was still in Presenter from before I moved to new my Mac and it won't play. "application encounter an internal error"

Thank you for your response Rajeev, yet I have a few concerns about it.
As I said, my screen resolution is what the Presenter Help page says it should be for a MacBook Pro: 1440x900.
1. In addition to the Photoshop problem I had when everything was migrated from my old MacBook Pro running Mavericks to my new one running Yosemite, I also had a problem with Dreamweaver and what was a permissions problem. Is that what is going on here with Presenter 10? Adobe techs refused to talk to me since my versions of both programs were a couple years old.
So I called Apple, as it was clear it was a permissions issue that would not allow me to open up my Dreamweaver files.
To address the permissions problem with Dreamweaver, Apple had me create a new user account with admin rights, and in doing so (although the tech PROMISED it wouldn't happen even though I voiced my concerns about it) ALL my stored passwords were wiped out. They ended up having to give me a big Apple store purchase credit because it took me hours to add all my passwords back in manually - and some I didn't have written down. If I create another new one, I bet the same thing is going to happen.
2. The permissions problem in Dreamweaver was solved by creating a new user account with admin rights. I did not have to do a clean re-install. However, the Photoshop problem required the Java 6 Runtime download from Apple, as well as uninstalling and reinstalling Photoshop. Since I have been in the process of moving and my Creative Suite discs were in a box, I first tried downloading it from Adobe. But when I opened it up and clicked on the install icon, an error message came up that said Apple will not allow downloads to be installed unless they are purchased from the Apple store, or are an from an "approved vendor" (or something like that). I was like, WHAT???? But fortunately I found the box my software was in and reinstalled Photoshop from it.
Naturally my concern is if I download Presenter 10 again (I do not have it on disc) I will get the same Apple error message. I had massive problems with the previous version of Presenter and Adobe techs spent hours and hours with me trying to fix the problem - and actually made some things worse. I finally requested a free copy of Presenter 10 Student edition (I am a full time student) as compensation for all my time, and that is the version I have and is registered with Adobe.

Error message the file "itunes.itl" cannot be read because it was created by a newer version of iTunes.

I had to do a system recovery with a prior date. now I get an error message: the file "iTunes.itl" cannot be read because it was created by a newer version of iTunes. Anyone have a solution?

I know this is an old thread, but the information in it solved my current problem (Windows Vista, upgraded to iTunes 11.2 and resulted in this same .itl error message).
So, I'm here to thank turingtest2 for his excellent instructions to fix my problem. One of tt2's many detailed instructional tips). THANK YOU TURINGTEST2!
PS I'm generally reluctant to "mess with files and such, preferring to use Windows Restore, because it just doesn't seem right to me that end users of Apple devices should have to get into the guts of files and such. Sadly, I have finally just accepted that iOS updates never work right and I either have to deal with work-around fixes or never update. Eventually we do need to update or there will be other problems. All I can say is, I'm sure glad there are folks like turingtest2 here who spend so much time helping us.

Error message: "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes."

I uninstalled iTunes, and reinstalled, (most current version of iTunes, of course) per advice given on this forum. I got this error message when I tried to open iTunes: "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes." Resolution of this issue would be great. It seems as if I am having at least as many problems now with iTunes as I have had with Windows products in the past. That really *****!

I know this is an old thread, but the information in it solved my current problem (Windows Vista, upgraded to iTunes 11.2 and resulted in this same .itl error message).
So, I'm here to thank turingtest2 for his excellent instructions to fix my problem. One of tt2's many detailed instructional tips). THANK YOU TURINGTEST2!
PS I'm generally reluctant to "mess with files and such, preferring to use Windows Restore, because it just doesn't seem right to me that end users of Apple devices should have to get into the guts of files and such. Sadly, I have finally just accepted that iOS updates never work right and I either have to deal with work-around fixes or never update. Eventually we do need to update or there will be other problems. All I can say is, I'm sure glad there are folks like turingtest2 here who spend so much time helping us.

Itunes error message "itunes library cannot be read because it was created by a newer version of itunes"

I have an iBook G4 with OS 10.4.11 (Tiger operating system). I keep getting an error message in Itunes: "Itunes library cannot be read because it was created by a newer version of itunes". What do I do? I also cannot access the Itunes store. This is an older laptop (2006) which still works great except for this. Please help.

I know this is an old thread, but the information in it solved my current problem (Windows Vista, upgraded to iTunes 11.2 and resulted in this same .itl error message).
So, I'm here to thank turingtest2 for his excellent instructions to fix my problem. One of tt2's many detailed instructional tips). THANK YOU TURINGTEST2!
PS I'm generally reluctant to "mess with files and such, preferring to use Windows Restore, because it just doesn't seem right to me that end users of Apple devices should have to get into the guts of files and such. Sadly, I have finally just accepted that iOS updates never work right and I either have to deal with work-around fixes or never update. Eventually we do need to update or there will be other problems. All I can say is, I'm sure glad there are folks like turingtest2 here who spend so much time helping us.

Error message "the file "itunes library.it" cannot be read because

it was created by a newer version of itunes."
I upgraded to laters version 7 of itunes. After installation, all the songs in my library were skipping. I uninstalled. I reinstalled vesion 6.0.5.20 and I am getting the error message above. Is there a way to convert my liberary so it can be read by version 6.0.5.20?
Thanks

I know this is an old thread, but the information in it solved my current problem (Windows Vista, upgraded to iTunes 11.2 and resulted in this same .itl error message).
So, I'm here to thank turingtest2 for his excellent instructions to fix my problem. One of tt2's many detailed instructional tips). THANK YOU TURINGTEST2!
PS I'm generally reluctant to "mess with files and such, preferring to use Windows Restore, because it just doesn't seem right to me that end users of Apple devices should have to get into the guts of files and such. Sadly, I have finally just accepted that iOS updates never work right and I either have to deal with work-around fixes or never update. Eventually we do need to update or there will be other problems. All I can say is, I'm sure glad there are folks like turingtest2 here who spend so much time helping us.

Customising Error Messages in JHeadstart

Hi All,
I would like to customise some ADF JSF error message. I've got the error - JBO-25013: Too many objects match the primary key oracle.jbo.Key[ASGARD CBD ]. but would like to replace it with "Row already exists with same Cmp Id,Cmp Tran Type".
I've followed the steps outlined in http://download-west.oracle.com/docs/html/B25947_01/bcadvgen008.htm#sm0462 and after recompilation and reganeration, the old error message still appears. Can you guys please help me with it? Thank you and have a nice day.
Kind Regards,
John

Hi,
Thank you for your reply but I'm a bit confused here.
First, when you say 'open your JHS-Application definition generator' do you actually mean JHS Application Definition Editor (JADE)?
Under the service node? I cannot see any 'service node' anywhere inside JADE. But I can see 'NLS Resource Bundle *' with the value of 'PAM0840_From_Designer.view.ApplicationResources'.
Go to the above path? What above path do you mean?
Uncheck OVERRIDE NLS entries? Do you mean uncheck the 'Override NLS Resource Bundle Entries?*' inside JADE under the 'Internationalization' section?
Thank you for your advice.
Kind Regards,
John

Same old error message - 0x80020022

Similar Messages

Maybe you are looking for