Sample Code for CRM enhancement in BADI

hi,
  can anybody please give me sample code for BADI for CRM enhancement.
i have added couple of z field in a extract structure. now i have to write code in BADI to populate those fields.
please do not send code for user exit.
Regards
Subrata

Hi Aviral,
Please consider below thread :
http://scn.sap.com/thread/2069370
Best regards - Christophe

Similar Messages

  • Need sample code for Using BADI ME_PROCESS_REQ_CUST

    Dear all,
    Initially my requirement is to Validate the Document Type of Purchase Request ion as per material.
    I have created a implementation for BADI : ME_PROCESS_REQ_CUST .
    im new to OOPS-ABAP, so pls send *sample code for how to use these methods PROCESS_ITEM,
    like declarations, assignment of data into internal table  for further validation*.
    Regards,
    NIranjan.G

    Hi,
    get the item data ....
         *DATA : lt_item TYPE MEREQ_ITEM,
                       ls_item liek line of it_item*
             CALL METHOD im_item->GET_DATA
               RECEIVING
                 RE_DATA = lt_item .
    you will get the data in lt_item.. table
    Thanks,
    Shailaja Ainala.

  • Routine sample code for reading 2 fields from existing DSO

    Hi Gurus,
                 I am a monkey when it comes to write ABAP code. I have one DSO-A where we store accounting info of purchading (from DS 2lis_02_acc) and one DSO-B getting data from 2lis_02_scl data source.
    We need to write a rountine to read DSO-A for G/L account and populate DSO-B G/L account field.
    Please provide me the sample code for this.
    Warm Regards,
    Anil

    Hi anil,
    Create a local table this is type of you source,
    Data : LV_table  TYPE  XXXX
    use the select statement to read the table of DSO .You have to use th active table for the dso that you want to read data from.
    Select xxxfieldxxx FROM  /BIC/A..........50
    into lv_table where
    filed name of of scheule line probably order no and item no .
    <soruce-fields>-IOBELN = IOBELN
    and <source-fields>-IOBELP = IOBELP.
    Checke the techinal name i am not sure about it. It will be something like that.
    Cheers mate

  • ABAP Sample code for HR_MAINTAIN_MASTERDATA

    Hi folks,
    I want to delimit a record in the HR master Table wi the help of Function Module HR_MAINTAIN_MASTERDATA, but its not updating HR master table correctly so please send me some sample code for that function module.
    usefull points will rewarded.
    Reg,
    Hariharan

    hi
    good
    check with this code
    Call update function module:
          CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
            EXPORTING
              PERNR           = SS300_0001T-PERNR
              ACTIO           = OPERATION
              BEGDA           = VALIDITYBEGIN
              ENDDA           = '99991231'
              SUBTY           = SPACE
              NO_ENQUEUE      = SPACE
            IMPORTING
              RETURN1         = RETURN
            TABLES
              PROPOSED_VALUES = VALUES
            MODIFIED_KEYS   =
            EXCEPTIONS
              OTHERS          = 1.
          IF RETURN IS INITIAL.
            CONCATENATE SS300_0002-VORNA SS300_0002-NACHN
              INTO ENAME SEPARATED BY SPACE.
            CONDENSE ENAME.
            MESSAGE S006 WITH ENAME SPACE.
          ELSE.
            MESSAGE ID     RETURN-ID
                    TYPE   'S'
                    NUMBER RETURN-NUMBER
                    WITH   RETURN-MESSAGE_V1 RETURN-MESSAGE_V2
                           RETURN-MESSAGE_V3 RETURN-MESSAGE_V4.
          ENDIF.
    http://help.sap.com/saphelp_nw04/helpdata/en/f1/0ce464dc8b11d2803800c04f99fbf0/content.htm
    reward point if helpful.
    thanks
    mrutyun^

  • Hi guys please give me sample code for call transaction that handles error

    hi guys, please give me sample code for call transaction that handles error,
    please send me the sample code in which there should be all decleration part and everything, based on the sample code i will develop my code.
    please do help me as it is urgent.
    thanks and regards.
    prasadnn.

    Hi Prasad,
    Check this code.
    Source Code for BDC using Call Transaction
    *Code used to create BDC
    *& Report  ZBDC_EXAMPLE                                                *
    *& Example BDC program, which updates net price of item 00010 of a     *
    *& particular Purchase order(EBELN).                                   *
    REPORT  ZBDC_EXAMPLE  NO STANDARD PAGE HEADING
                          LINE-SIZE 132.
    Data declaration
    TABLES: ekko, ekpo.
    TYPES: BEGIN OF t_ekko,
        ebeln TYPE ekko-ebeln,
        waers TYPE ekko-waers,
        netpr TYPE ekpo-netpr,
        err_msg(73) TYPE c,
    END OF t_ekko.
    DATA: it_ekko  TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_ekko  TYPE t_ekko,
          it_error TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_error TYPE t_ekko,
          it_success TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_success TYPE t_ekko.
    DATA: w_textout            LIKE t100-text.
    DATA: gd_update TYPE i,
          gd_lines TYPE i.
    *Used to store BDC data
    DATA: BEGIN OF bdc_tab OCCURS 0.
            INCLUDE STRUCTURE bdcdata.
    DATA: END OF bdc_tab.
    *Used to stores error information from CALL TRANSACTION Function Module
    DATA: BEGIN OF messtab OCCURS 0.
            INCLUDE STRUCTURE bdcmsgcoll.
    DATA: END OF messtab.
    *Screen declaration
    SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME
                                        TITLE text-001. "Purchase order Num
    SELECT-OPTIONS: so_ebeln FOR ekko-ebeln OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK block1.
    SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME
                                        TITLE text-002. "New NETPR value
    PARAMETERS:  p_newpr(14)   TYPE c obligatory.  "LIKE ekpo-netpr.
    SELECTION-SCREEN END OF BLOCK block2.
    *START-OF-SELECTION
    START-OF-SELECTION.
    Retrieve data from Purchase order table(EKKO)
      SELECT ekkoebeln ekkowaers ekpo~netpr
        INTO TABLE it_ekko
        FROM ekko AS ekko INNER JOIN ekpo AS ekpo
          ON ekpoebeln EQ ekkoebeln
       WHERE ekko~ebeln IN so_ebeln AND
             ekpo~ebelp EQ '10'.
    *END-OF-SELECTION
    END-OF-SELECTION.
    Check data has been retrieved ready for processing
      DESCRIBE TABLE it_ekko LINES gd_lines.
      IF gd_lines LE 0.
      Display message if no data has been retrieved
        MESSAGE i003(zp) WITH 'No Records Found'(001).
        LEAVE TO SCREEN 0.
      ELSE.
      Update Customer master data (instalment text)
        LOOP AT it_ekko INTO wa_ekko.
          PERFORM bdc_update.
        ENDLOOP.
      Display message confirming number of records updated
        IF gd_update GT 1.
          MESSAGE i003(zp) WITH gd_update 'Records updated'(002).
        ELSE.
          MESSAGE i003(zp) WITH gd_update 'Record updated'(003).
        ENDIF.
    Display Success Report
      Check Success table
        DESCRIBE TABLE it_success LINES gd_lines.
        IF gd_lines GT 0.
        Display result report column headings
          PERFORM display_column_headings.
        Display result report
          PERFORM display_report.
        ENDIF.
    Display Error Report
      Check errors table
        DESCRIBE TABLE it_error LINES gd_lines.
      If errors exist then display errors report
        IF gd_lines GT 0.
        Display errors report
          PERFORM display_error_headings.
          PERFORM display_error_report.
        ENDIF.
      ENDIF.
    *&      Form  DISPLAY_COLUMN_HEADINGS
          Display column headings
    FORM display_column_headings.
      WRITE:2 ' Success Report '(014) COLOR COL_POSITIVE.
      SKIP.
      WRITE:2 'The following records updated successfully:'(013).
      WRITE:/ sy-uline(42).
      FORMAT COLOR COL_HEADING.
      WRITE:/      sy-vline,
              (10) 'Purchase Order'(004), sy-vline,
              (11) 'Old Netpr'(005), sy-vline,
              (11) 'New Netpr'(006), sy-vline.
      WRITE:/ sy-uline(42).
    ENDFORM.                    " DISPLAY_COLUMN_HEADINGS
    *&      Form  BDC_UPDATE
          Populate BDC table and call transaction ME22
    FORM bdc_update.
      PERFORM dynpro USING:
          'X'   'SAPMM06E'        '0105',
          ' '   'BDC_CURSOR'      'RM06E-BSTNR',
          ' '   'RM06E-BSTNR'     wa_ekko-ebeln,
          ' '   'BDC_OKCODE'      '/00',                      "OK code
          'X'   'SAPMM06E'        '0120',
          ' '   'BDC_CURSOR'      'EKPO-NETPR(01)',
          ' '   'EKPO-NETPR(01)'  p_newpr,
          ' '   'BDC_OKCODE'      '=BU'.                      "OK code
    Call transaction to update customer instalment text
      CALL TRANSACTION 'ME22' USING bdc_tab MODE 'N' UPDATE 'S'
             MESSAGES INTO messtab.
    Check if update was succesful
      IF sy-subrc EQ 0.
        ADD 1 TO gd_update.
        APPEND wa_ekko TO it_success.
      ELSE.
      Retrieve error messages displayed during BDC update
        LOOP AT messtab WHERE msgtyp = 'E'.
        Builds actual message based on info returned from Call transaction
          CALL FUNCTION 'MESSAGE_TEXT_BUILD'
               EXPORTING
                    msgid               = messtab-msgid
                    msgnr               = messtab-msgnr
                    msgv1               = messtab-msgv1
                    msgv2               = messtab-msgv2
                    msgv3               = messtab-msgv3
                    msgv4               = messtab-msgv4
               IMPORTING
                    message_text_output = w_textout.
        ENDLOOP.
      Build error table ready for output
        wa_error = wa_ekko.
        wa_error-err_msg = w_textout.
        APPEND wa_error TO it_error.
        CLEAR: wa_error.
      ENDIF.
    Clear bdc date table
      CLEAR: bdc_tab.
      REFRESH: bdc_tab.
    ENDFORM.                    " BDC_UPDATE
          FORM DYNPRO                                                   *
          stores values to bdc table                                    *
    -->  DYNBEGIN                                                      *
    -->  NAME                                                          *
    -->  VALUE                                                         *
    FORM dynpro USING    dynbegin name value.
      IF dynbegin = 'X'.
        CLEAR bdc_tab.
        MOVE:  name TO bdc_tab-program,
               value TO bdc_tab-dynpro,
               'X'  TO bdc_tab-dynbegin.
        APPEND bdc_tab.
      ELSE.
        CLEAR bdc_tab.
        MOVE:  name TO bdc_tab-fnam,
               value TO bdc_tab-fval.
        APPEND bdc_tab.
      ENDIF.
    ENDFORM.                               " DYNPRO
    *&      Form  DISPLAY_REPORT
          Display Report
    FORM display_report.
      FORMAT COLOR COL_NORMAL.
    Loop at data table
      LOOP AT it_success INTO wa_success.
        WRITE:/      sy-vline,
                (10) wa_success-ebeln, sy-vline,
                (11) wa_success-netpr CURRENCY wa_success-waers, sy-vline,
                (11) p_newpr, sy-vline.
        CLEAR: wa_success.
      ENDLOOP.
      WRITE:/ sy-uline(42).
      REFRESH: it_success.
      FORMAT COLOR COL_BACKGROUND.
    ENDFORM.                    " DISPLAY_REPORT
    *&      Form  DISPLAY_ERROR_REPORT
          Display error report data
    FORM display_error_report.
      LOOP AT it_error INTO wa_error.
        WRITE:/      sy-vline,
                (10) wa_error-ebeln, sy-vline,
                (11) wa_error-netpr CURRENCY wa_error-waers, sy-vline,
                (73) wa_error-err_msg, sy-vline.
      ENDLOOP.
      WRITE:/ sy-uline(104).
      REFRESH: it_error.
    ENDFORM.                    " DISPLAY_ERROR_REPORT
    *&      Form  DISPLAY_ERROR_HEADINGS
          Display error report headings
    FORM display_error_headings.
      SKIP.
      WRITE:2 ' Error Report '(007) COLOR COL_NEGATIVE.
      SKIP.
      WRITE:2 'The following records failed during update:'(008).
      WRITE:/ sy-uline(104).
      FORMAT COLOR COL_HEADING.
      WRITE:/      sy-vline,
              (10) 'Purchase Order'(009), sy-vline,
              (11) 'Netpr'(010), sy-vline,
              (73) 'Error Message'(012), sy-vline.
      WRITE:/ sy-uline(104).
      FORMAT COLOR COL_NORMAL.
    ENDFORM.                    " DISPLAY_ERROR_HEADINGS
    Hope this resolves your query.
    Reward all the helpful answers.
    Regards

  • Need case studies and sample code for all concept of ABAP

    Hello,
           Can anybody provide me the case studies and sample code for learning different concepts in ABAP programming like: module pool, ALV, interactive reports, BDC, Smart Form etc.? As I want to do some practical application by which i can learn more.
    Thanks & Regards,
    Vikram Rawal

    In this link You can find Step by Step Scren Shot document :
    http://www.201interviewquestions.com/docs/User%20exits.ppt
    http://erpgenie.com/abaptips/component/option,com_docman/task,doc_details/gid,27/
    <b>
    Reprots</b>
    http://www.sapgenie.com/abap/reports.htm
    http://www.allsaplinks.com/material.html
    http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
    http://www.sapfans.com/forums/viewtopic.php?t=58286
    http://www.sapfans.com/forums/viewtopic.php?t=76490
    http://www.sapfans.com/forums/viewtopic.php?t=20591
    http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
    <b>Dictionary</b>
    http://sapabap.iespana.es/sapabap/manuales/learnabap/
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb6e446011d189700000e8322d00/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ea31446011d189700000e8322d00/frameset.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCDWBDIC/BCDWBDIC.pdf
    <b>ABAP objects</b>
    Please check this online document (starting page 1291).
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf
    Also check this links as well.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
    http://www.sapgenie.com/abap/OO/
    http://www.futureobjects.de/content/intro_oo_e.html
    http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
    /people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
    <b>
    SAPScripts</b>
    http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
    http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
    http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
    http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
    http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
    http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
    SAP SCRIPT FIELDS
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
    scripts easy material
    http://www.allsaplinks.com/sap_script_made_easy.html
    Check these step-by-step links
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
    https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
    <b>Smartforms material</b>
    http://www.sap-basis-abap.com/sapsf001.htm
    http://www.sap-press.com/downloads/h955_preview.pdf
    http://www.ossincorp.com/Black_Box/Black_Box_2.htm
    http://www.sap-img.com/smartforms/sap-smart-forms.htm
    http://www.sap-img.com/smartforms/smartform-tutorial.htm
    http://www.sapgenie.com/abap/smartforms.htm
    How to trace smartform
    http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
    http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
    http://www.sap-img.com/smartforms/smart-006.htm
    http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
    Re: Need FAQ's
    check most imp link
    http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
    step by step good ex link is....
    http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
    <b>
    BAPI</b>
    http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
    Checkout !!
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
    http://techrepublic.com.com/5100-6329-1051160.html#
    http://www.sap-img.com/bapi.htm
    http://www.sap-img.com/abap/bapi-conventions.htm
    http://www.sappoint.com/abap/bapiintro.pdf
    http://www.sapgenie.com/abap/bapi/example.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
    <b>List of all BAPIs</b>
    http://www.planetsap.com/LIST_ALL_BAPIs.htm
    http://www.sappoint.com/abap/bapiintro.pdf
    http://www.sappoint.com/abap/bapiprg.pdf
    http://www.sappoint.com/abap/bapiactx.pdf
    http://www.sappoint.com/abap/bapilst.pdf
    http://www.sappoint.com/abap/bapiexer.pdf
    http://service.sap.com/ale
    http://service.sap.com/bapi
    http://www.planetsap.com/Bapi_main_page.htm
    http://www.topxml.com/sap/sap_idoc_xml.asp
    http://www.sapdevelopment.co.uk/
    http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
    <b>ALV programs.</b>
    http://www.geocities.com/mpioud/Abap_programs.html
    . How do I program double click in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=11601
    http://www.sapfans.com/forums/viewtopic.php?t=23010
    How can I use ALV for reports that are going to be run in background?
    http://www.sapfans.com/forums/viewtopic.php?t=83243
    http://www.sapfans.com/forums/viewtopic.php?t=19224
    <b>ALV</b>
    http://www.sapfans.com/forums/viewtopic.php?t=58286
    http://www.sapfans.com/forums/viewtopic.php?t=76490
    http://www.sapfans.com/forums/viewtopic.php?t=20591
    http://www.sapfans.com/forums/viewtopic.php?t=66305 - http://www.sapgenie.com/abap/reports.htm
    http://www.allsaplinks.com/material.html
    http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
    <b>Top-of-page in ALV</b>
    selection-screen and top-of-page in ALV
    <b>ALV Group Heading</b>
    http://www.sap-img.com/fu037.htm
    <b>ALV</b>
    http://www.geocities.com/mpioud/Abap_programs.html
    <b>
    RFC Destination</b>
    Re: SM59
    <b>
    ALE/ IDOC</b>http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    <b>Table Control</b>
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/table%20control%20in%20abap.pdf
    <b>
    ABAP transactions</b>
    http://www.easymarketplace.de/transactions-a-e.php?Area=4soi&name=volker&pw=vg&
    Regards,
    Priyanka.

  • Kindly write some sample code for this scenario

    Kindly write some sample code for the below Logic.
    For a set of Deliveries entered on the selection screen get the relevant data from LIKP & LIPS.
    for all the deliveries selected get the sales order data from VBAK & VBAP based on the VGBEL & VGPOS in LIPS.
    The Output internal table should contain only deliveries which are created with reference to a sales order.
    Thanx in Advance.
    Akshitha.

    Hi,
    Select avbeln bposnr bmatnr blfimg bvgbel bvgpos into table ITAB
       from likp as a join lips as b on Avbeln =  bvbeln
       where a~vbeln in s_vbeln..
    if not itab[] is initial.
       select avbeln bposnr b~matnr ... into table itab1 from vbak as a join vbap as b
       on avbeln = bvbeln
       for all entries in itab where avbeln = itab-vgbel and bposnr = itab-vgpos.
    endif.
    loop at itab.
    read table itab1 with key vbeln = itab-vgbel posnr = itab-vgpos.
      if sy-subrc <> 0.
          delete itab index sy-tabix.
       endif.
    endloop.
    Now ITAB will have only deliveries created against Sales orders.
    reward points if useful
    regards,
    Anji

  • Any sample code for an Extractor to read in a flat file?

    Hi SAP gurus,
    Are there any sample code for an extractor to read in a flat file?
    Are there any documentation on custom coding an extractor to dump
    information into an info source?
    Are there any documentation on the pit falls and contraints using Solution
    Manager, the BI tools, particularly on the Info Source?
    Thanks,
    Steve

    Thanks Muppet Mark
    I forgot to mention that I had also tried just fileObject.read() as well and it didn't work either.  It was the same run on sentence result I got with the script I showed above.  Seems odd.  However, the \r instead of \n did the trick.  I had some recollection of another line feed character but couldn't remember what it was, so thanks for that.
    Doug

  • Sample code for connect to database

    Hi
    like to know if there is any sample code for me to follow through to connect to database using ODBC.
    I am currently writing a program in visual c++.
    like to know how to connect database to store image in the database
    using visual c++ code.....
    hope that is not too difficult.

    in JSTL pratical guide for JSP programmers by Sue Spielman
    <sql:setDataSource var="datasource"
    driver="org.gjt.mm.mysql.driver"
    url="jdbc:mysql://localhost/db"
    user="guest"
    password="guest" />
    <sql:query datasource="${datasource}...
    <html>
    <head>
    <title>
    Display Results
    </title>
    </head>
    <body>
    <c:catch var="sqlError">
    <sql:query var="bookList" dataSource="${datasource}">
         SELECT * FROM books WHERE title LIKE 'J%' ORDER BY author
    </sql:query>
    </c:catch>
    <c:if test="${not empty sqlError}" >
    Make sure you have already run the databaseinit.jsp file
    </c:if>
    <h2>Listing all books that start with a 'J', ordered by author</h2>
    <br>
    <table>
    <th>Title</th>
    <th>Author</th>
    <c:forEach var="book" items="${bookList.rows}">
         <tr>
              <td><c:out value="${book.title}" /></td>
              <td><c:out value="${book.author}" /></td>
         </tr>
    </c:forEach>
    </table>
    </table>
    <h2>Show using choose/when/otherwise conditional to display results</h2>
    <table>
    <tr><th>Title</th></tr>
    <c:forEach var="book" varStatus="current" items="${bookList.rows}">
    <tr>
    <c:choose>
         <c:when test="${current.first}" >
              <td><font color="#0000FF"><c:out value="${book.title}"/></font></td>
         </c:when>
         <c:when test="${current.count % 2 == 1 }" >
              <td><font color="#FF0000"><c:out value="${book.title}"/></font></td>
         </c:when>
         <c:otherwise>
              <td><c:out value="${book.title}"/></td>
         </c:otherwise>
    </c:choose>
    </tr>
    </c:forEach>
    </table>
    </body>
    </html>

  • Where Can the Sample Code for That Balloon Game Demoed on WWDC for Swift Be Downloaded

    Hi. I can't find the balloon game sample code used in the WWDC in the Sample Code for iOS or OS X (assuming it's available for download). If it is available for download by Apple, where can it be downloaded?
    Thank you in advance.
    God bless, Cor. 13

    The assets are in the .playground file's file package. Select the .playground file in the Finder, right-click, and choose Show Package Contents to browse the file package. The graphics files are in the Resources folder inside the file package.

  • Exception in running the sample code for XA

    Hi,
    I'm trying out sample code for XA with Two-phase commit operation - X4.java provided in "Oracle8i JDBC Developer's Guide and Reference"
    http://technet.oracle.com/docs/products/oracle8i/doc_library/817_doc/java.817/a83724/samapp9.htm#1012235
    I'm getting the following exception.
    java.sql.SQLException: ORA-06550: line 1, column 13:
    PLS-00201: identifier 'JAVA_XA.XA_START' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
         at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
         at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
         at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1405)
         at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:822)
         at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:1446)
         at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1371)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1900)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:363)
         at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:407)
         at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:156)
         at orajta.XA4.main(XA4.java:126)
    oracle.jdbc.xa.OracleXAException
         at oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:498)
         at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:190)
         at orajta.XA4.main(XA4.java:126)
    What's the reason for the above exception and can someone help me with a possible fix for the same? Your help is greatly appreciated.
    Thanks,
    Haja

    Hi,
    I dont have access to a 8i db, but i ran the sample between two oracle9i db and it ran successfully.
    Regards
    Elango.

  • Sample code for Org Management

    Hi,
             I am new to Org Management coding in HR ABAP.
       Can anybody post some simple sample code for Org. Management so that I can understand the flow of coding..
    Thanks and Regards,
    Ram

    Hi
    see the sample code using Orgn management infotypes like HRP1000 etc
    report zporgr0040
           line-size 108
           line-count 60(1)
           no standard page heading
           message-id zndc.
    Database Tables
    tables: hrp1001,     " HR Master Record (Orgn. Assignment)
            pa0002,      " Personal Data
            t528t,       " Position Texts
            t527x,       " Org Unit Text
            t528b,       " Positions
            csks,        " Cost Center
            cskt.        " Cost Center Texts
    Declaration of Internal Tables
    Internal Table for Orgn Object Data  HRP1000
    data: begin of obj_tab occurs 0,
            otype like hrp1000-otype,      " Object Type
            objid like hrp1000-objid,      " Object ID
            plvar like hrp1000-plvar,      " Plan Version
            istat like hrp1000-istat,      " Planning Status
            begda like hrp1000-begda,      " Begin date
            endda like hrp1000-endda,      " End date
          end of obj_tab.
    Internal Table for Active Employees data PA0000
    data: begin of stat_tab occurs 0,
            pernr like pa0000-pernr,       " Object Type
            begda like pa0000-begda,       " Begin date
            endda like pa0000-endda,       " End date
            stat2 like pa0000-stat2,       " Employment Status
          end of stat_tab.
    Internal Table for Actual Orgn Assignment Data PA0001
    data: begin of act_tab occurs 0,
            pernr like pa0001-pernr,       " Object Type
            begda like pa0001-begda,       " Begin date
            endda like pa0001-endda,       " End date
            kostl like pa0001-kostl,       " Cost Center
            orgeh like pa0001-orgeh,       " Org Unit
            plans like pa0001-plans,       " Position
            natio like pa0002-natio,       " Nationality
          end of act_tab.
    Internal Table for Orgn Data HRP1001
    data: begin of org_tab occurs 0,
            otype like hrp1001-otype,      " Object Type
            objid like hrp1001-objid,      " Object ID
            plvar like hrp1001-plvar,      " Plan Version
            istat like hrp1001-istat,      " Planning Status
            begda like hrp1001-begda,      " Begin date
            endda like hrp1001-endda,      " End date
            subty like hrp1001-subty,      " Sub Type
            sclas like hrp1001-sclas,      " Type of Related Object
            sobid like hrp1001-sobid,      " Id of Related Object
            kostl like pa0001-kostl,       " Cost Center
            plstx like t528t-plstx,        " Position Text
            orgtx like t527x-orgtx,        " Org Unit Text
          end of org_tab.
    Internal Table for Position Calculations
    data: begin of org1_tab occurs 0,
            kostl like pa0001-kostl,       " Cost Center
            objid like hrp1001-objid,      " Object ID
          end of org1_tab.
    Internal Table for Position Calculations
    data: begin of org2_tab occurs 0,
            kostl like pa0001-kostl,       " Cost Center
            count type i,                  " No of Positions
          end of org2_tab.
    Internal Table for Actual Manpower Calculations
    data: begin of act1_tab occurs 0,
            kostl like pa0001-kostl,       " Cost Center
            natio like pa0002-natio,       " Nationality
            plans like pa0001-plans,       " Position
          end of act1_tab.
    Internal Table for Actual Manpower Calculations(UAE)
    data: begin of act2_tab occurs 0,
            kostl like pa0001-kostl,       " Cost Center
            natio like pa0002-natio,       " Nationality
          end of act2_tab.
    Internal Table for Actual Manpower Calculations(Others)
    data: begin of act3_tab occurs 0,
            kostl like pa0001-kostl,       " Cost Center
            natio like pa0002-natio,       " Nationality
          end of act3_tab.
    Internal Table for Actual Manpower Calculations(UAE)
    data: begin of act4_tab occurs 0,
            kostl like pa0001-kostl,       " Cost Center
            count1 type i,                 " No of Positions(UAE)
          end of act4_tab.
    Internal Table for Actual Manpower Calculations(OTHERS)
    data: begin of act5_tab occurs 0,
            kostl like pa0001-kostl,       " Cost Center
            count2 type i,                 " No of Positions(Others)
          end of act5_tab.
    Internal Table for Vaccancies Data
    data: begin of vac_tab occurs 0,
            plvar like hrp1007-plvar,      " Plan Version
            otype like hrp1007-otype,      " Object Type
            objid like hrp1007-objid,      " Object ID
            istat like hrp1007-istat,      " Planning Status
            begda like hrp1007-begda,      " Begin date
            endda like hrp1007-endda,      " End date
            vacan like hrp1007-vacan,      " Vacancy Indicator
            status like hrp1007-status,    " Status of Vacancy
          end of vac_tab.
    Internal Table to store the Report Output data
    data : begin of rep_tab occurs 0 ,
             kostl(10) type n,                  " Cost Cente
             plans   like pa0001-plans,         " Position
             vacan   like hrp1007-vacan,        " Vacancy Indicator
             status  like hrp1007-status,       " Status of Vacancy
             plstx   like t528t-plstx,          " Position Text
             orgtx like t527x-orgtx,            " Org Unit Text
           end of rep_tab.
    Internal Table to store the Report Output data
    data : begin of rep1_tab occurs 0 ,
             kostl(10) type n,                  " Cost Cente
             cnt     type i,                    " No of Vacancies
           end of rep1_tab.
    Internal Table to store the Report Output data
    data : begin of rep2_tab occurs 0 ,
             kostl(10) type n,                  " Cost Cente
             app_no    type i,                  " Approved
             nat_no    type i,                  " National
             exp_no    type i,                  " Expatriate
             tot_no    type i,                  " Total
             vac_no    type i,                  " Vacancies
           end of rep2_tab.
    Declaration of Variables
    data: v_sobid  like hrp1001-sobid,   " Object Id
          v_sobid1 like hrp1001-sobid,   " Object Id
          v_sobid2 like hrp1001-sobid,   " Object Id
          v_sclas  like hrp1001-sclas,   " Related Obj Type
          v_subty  like hrp1001-subty,   " Related Object Id
          v_otype  like hrp1007-otype,   " Object Type
         v_str(9)    type c,            " Text
         v_str1(10)  type c,            " Text
          v_cnt    like sy-tabix.        " Table Index
    Declaration of Constants
    constants : c_x         type c value 'X',            " Flag
                c_stat1  like pa0000-stat2  value '3',   " Emp Status
                c_plan   like hrp1001-plvar value '01',  " Plan Version
                c_name   like hrp1000-uname value 'SAP', " Uname
                c_uae    like pa0002-natio  value 'AE',  " Country
                c_type   like hrp1007-otype  value 'O',  " Object Type
                c_otype  like hrp1007-otype  value 'S',  " Object Type
                c_stat   like hrp1007-status value '0',  " Status
                c_pstat  like hrp1007-istat  value '1',  " Plang Status
                c_sclas  like hrp1001-sclas value 'K',    " Rel. Obj Type
                c_subty  like hrp1001-subty value 'A002', " Related ObjId
                c_subty2 like hrp1001-subty value 'A003', " Related ObjId
                c_sclas1 like hrp1001-sclas value 'O',    " Rel.Obj Type
                c_subty1 like hrp1001-subty value 'A011', " Rel.Object Id
                c_kokrs  like coej-kokrs value '1000'. " Controlling Area
    Selection Screen
    selection-screen begin of block b1 with frame title text-001.
    parameters     :
      p_date  like pa0001-begda obligatory default sy-datum. " Date
    select-options :
      s_kostl for csks-kostl,                     " Cost Center
      s_plans for t528b-plans.                    " Position ID
    selection-screen end of block b1.
    At selection-screen
    at selection-screen.
    Validate the Selection Screen fields
      perform validate_screen.
    Start-of-Selection
    start-of-selection.
    Get the Orgn data from database Table HRP1001
      perform get_org_data.
    Get the Actual Manpower from PA0001
      perform get_act_data.
    Get the Vaccancies data from database Table HRP1007
      perform get_vac_data.
    Append the data into final Internal Table
      perform append_data.
    Top-of-page
    top-of-page.
    Write the Report and Column Headings
      perform top_of_page.
    End-of-Page
    end-of-page.
      write /1(108) sy-uline.
    End-of-Selection
    end-of-selection.
    Display the Output Report.
      perform display_report.
    Form-Routines
    *&      Form  validate_screen
    Validation of selection Screen fields
    form validate_screen.
    Validation of Position ID
      clear t528b.
      if not s_plans[] is initial.
        select single plans
          into t528b-plans
          from t528b
          where plans in s_plans.
        if sy-subrc <> 0.
          message e999 with 'Invalid Position ID'(009).
        endif.
      endif.
    Validation of Cost Center
      clear csks.
      if not s_kostl[] is initial.
        select single kostl
          into csks-kostl
          from csks
          where kostl in s_kostl.
        if sy-subrc <> 0.
          message e999 with 'Invalid Cost Center'(008).
        endif.
      endif.
    endform.                  "validate_screen
    *&      Form  get_org_data
    Get the Orgn Data from Database Table HRP1001
    form get_org_data.
    v_str  = 'Developee'(002).
    v_str1 = 'Deployment'(003).
    Select All the Positions from HRP1000
      select otype       " Object Type
             objid       " Object ID
             plvar       " Plan Version
             istat       " Planning Status
             begda       " Begin date
             endda       " End date
         into table obj_tab
         from hrp1000
         where otype = c_otype  and
               plvar = c_plan   and
               istat = c_pstat  and
               begda le p_date  and
               endda ge p_date  and
               objid in s_plans and
               uname ne c_name.
      sort obj_tab by otype objid.
    Get the Orgn and Cost Center for all the above Positions
      if not obj_tab[] is initial.
        select otype       " Object Type
               objid       " Object ID
               plvar       " Plan Version
               istat       " Planning Status
               begda       " Begin date
               endda       " End date
               subty       " Sub Type
               sclas       " Type of Related Object
               sobid       " Id of Related Object
           into table org_tab
           from hrp1001
           for all entries in obj_tab
           where otype = c_otype  and
                 plvar = c_plan   and
                 istat = c_pstat  and
                 begda le p_date  and
                 endda ge p_date  and
                 sclas eq c_sclas1 and
                 subty eq c_subty2 and
                 objid eq obj_tab-objid.
      endif.
      sort org_tab by otype objid.
    Get the Cost Center
      loop at org_tab.
        v_otype = c_otype.       " S
        v_sclas = c_sclas.       " K
        v_subty = c_subty1.                                     " A011
        v_sobid = org_tab-objid.
        perform get_org using v_otype v_sclas v_subty
                        v_sobid.
        if sy-subrc = 0.
          org_tab-kostl = hrp1001-sobid+0(10).
        else.
          v_otype = c_otype.    " S
          v_sclas = c_sclas1.   " O
          v_subty = c_subty2.                                   " A003
          v_sobid = org_tab-objid.
          perform get_org using v_otype v_sclas v_subty
                         v_sobid.
          if sy-subrc = 0.
            v_otype = c_type.     " O
            v_sclas = c_sclas.    " K
            v_subty = c_subty1.                                 " A011
            v_sobid1 = v_sobid.
            perform get_org using v_otype v_sclas v_subty
                                 v_sobid.
            if sy-subrc <> 0.
              v_otype = c_type.    " O
              v_sclas = c_sclas1.  " O
              v_subty = c_subty.                                " A002
              v_sobid = v_sobid1.
              perform get_org using v_otype v_sclas v_subty
                        v_sobid.
              if sy-subrc = 0.
                v_otype = c_type.   " O
                v_sclas = c_sclas.  " K
                v_subty = c_subty1.                             " A011
                v_sobid2 = v_sobid.
                perform get_org using v_otype v_sclas v_subty
                                 v_sobid.
                if sy-subrc <> 0.
                  v_otype = c_type.   " O
                  v_sclas = c_sclas1. " O
                  v_subty = c_subty.                            " A002
                  v_sobid = v_sobid2.
                  perform get_org using v_otype v_sclas v_subty
                          v_sobid.
                else.
                  org_tab-kostl = hrp1001-sobid+0(10).
                endif.
              endif.
            else.
              org_tab-kostl = hrp1001-sobid+0(10).
            endif.
          else.
            v_otype = c_otype.   " S
            v_sclas = c_otype.   " S
            v_subty = c_subty.                                  " A002
            v_sobid = org_tab-objid.
            perform get_org using v_otype v_sclas v_subty
                           v_sobid.
            if sy-subrc = 0.
              v_otype = c_otype.  " S
              v_sclas = c_sclas.  " K
              v_subty = c_subty1.                               " A011
              v_sobid1 = v_sobid.
              perform get_org using v_otype v_sclas v_subty
                                   v_sobid.
              if sy-subrc <> 0.
                v_otype = c_otype.  " S
                v_sclas = c_sclas1. " O
                v_subty = c_subty2.                             " A003
                v_sobid = v_sobid1.
                perform get_org using v_otype v_sclas v_subty
                          v_sobid.
                if sy-subrc = 0.
                  v_otype = c_type.   " O
                  v_sclas = c_sclas.  " K
                  v_subty = c_subty1.                           " A011
                  v_sobid2 = v_sobid.
                  perform get_org using v_otype v_sclas v_subty
                                   v_sobid.
                  if sy-subrc <> 0.
                    v_otype = c_type.    " O
                    v_sclas = c_sclas1.  " O
                    v_subty = c_subty.                          " A002
                    v_sobid = v_sobid2.
                    perform get_org using v_otype v_sclas v_subty
                            v_sobid.
                  else.
                    org_tab-kostl = hrp1001-sobid+0(10).
                  endif.
                endif.
              else.
                org_tab-kostl = hrp1001-sobid+0(10).
              endif.
            endif.
          endif.
        endif.
    Get the Position Text
        clear t528t.
        select single plstx from t528t into t528t-plstx
          where sprsl = sy-langu and
                otype = c_otype  and
                plans = org_tab-objid.
        org_tab-plstx = t528t-plstx.
    Get the Org Unit Text
        clear t527x.
        select single orgtx from t527x into t527x-orgtx
          where sprsl = sy-langu and
                orgeh = org_tab-sobid+0(8).
        org_tab-orgtx = t527x-orgtx.
        modify org_tab index sy-tabix.
        clear v_sobid.
      endloop.
      sort org_tab by otype objid.
    Calculate the Approved No of Positions
      loop at org_tab.
        if org_tab-kostl in s_kostl.
          move-corresponding org_tab to org1_tab.
          append org1_tab.
          clear org1_tab.
        endif.
      endloop.
      sort org1_tab by kostl objid.
      clear v_cnt.
      loop at org1_tab.
        at end of kostl.
          sy-tabix = sy-tabix - v_cnt.
          org2_tab-kostl = org1_tab-kostl.
          org2_tab-count   = sy-tabix.
          v_cnt = v_cnt + sy-tabix.
          append org2_tab.
          clear:org2_tab.
        endat.
      endloop.
      sort org2_tab by kostl.
    endform.              "get_org_data
    *&      Form  get_act_data
    Get the Actual Manpower Data from Database Table PA0001
    form get_act_data.
      clear  : stat_tab, act_tab.
      refresh: stat_tab, act_tab.
    Get all the Active Employees
      select pernr       " Object Type
             begda       " Begin date
             endda       " End date
             stat2       " Emp Status
           into table stat_tab
           from pa0000
           where stat2 eq c_stat1 and
                 begda le p_date  and
                 endda ge p_date.
      sort act_tab by pernr.
      if not stat_tab[] is initial.
        select pernr       " Object Type
               begda       " Begin date
               endda       " End date
               kostl       " Cost Center
               orgeh       " Org Unit
               plans       " Position
           into table act_tab
           from pa0001
           for all entries in stat_tab
           where pernr eq stat_tab-pernr and
                 kostl in s_kostl and
                 plans in s_plans and
                 persg eq '1'     and
                 begda le p_date  and
                 endda ge p_date.
      endif.
      sort act_tab by pernr.
      loop at act_tab.
        move-corresponding act_tab to act1_tab.
        clear pa0002-natio.
        select single natio into pa0002-natio from pa0002
          where pernr = act_tab-pernr.
        if sy-subrc = 0.
          act1_tab-natio = pa0002-natio.
        endif.
        append act1_tab.
        clear act1_tab.
      endloop.
      sort act1_tab by kostl natio.
    Calculate the Local and Expatriate Manpower
      loop at act1_tab.
        if act1_tab-natio = c_uae.
          act2_tab-kostl = act1_tab-kostl.
          act2_tab-natio = act1_tab-natio.
        else.
          act3_tab-kostl = act1_tab-kostl.
          act3_tab-natio = act1_tab-natio.
        endif.
        append: act2_tab, act3_tab.
        clear : act2_tab,act3_tab.
      endloop.
      sort act2_tab by kostl.
      sort act3_tab by kostl.
    Actual UAE Manpower
      clear v_cnt.
      loop at act2_tab.
        at end of kostl.
          sy-tabix = sy-tabix - v_cnt.
          act4_tab-kostl   = act2_tab-kostl.
          act4_tab-count1  = sy-tabix.
          v_cnt = v_cnt + sy-tabix.
          append act4_tab.
          clear:act4_tab.
        endat.
      endloop.
      sort act4_tab by kostl.
    Other Countries
      clear v_cnt.
      loop at act3_tab.
        at end of kostl.
          sy-tabix = sy-tabix - v_cnt.
          act5_tab-kostl   = act3_tab-kostl.
          act5_tab-count2  = sy-tabix.
          v_cnt = v_cnt + sy-tabix.
          append act5_tab.
          clear:act5_tab.
        endat.
      endloop.
      sort act5_tab by kostl.
    endform.              "get_act_data
    *&      Form  get_org
    Get the Cost Center from Parent Org Id
    form get_org using p_v_otype p_v_sclas p_v_subty p_v_sobid.
      clear hrp1001.
      select single * from hrp1001
            where otype = p_v_otype  and
                  plvar = c_plan   and
                  istat = c_pstat  and
                  begda le p_date  and
                  endda ge p_date  and
                  sclas eq p_v_sclas   and
                  subty eq p_v_subty  and
                  objid eq p_v_sobid.
      v_sobid = hrp1001-sobid+0(8).
    endform.                    " get_org
    *&      Form  get_vac_data
    Get the Vaccancies Data from Database Table HRP1007
    form get_vac_data.
      if not org_tab[] is initial.
        select plvar       " Plan Version
               otype       " Object Type
               objid       " Object ID
               istat       " Planning Status
               begda       " Begin date
               endda       " End date
               vacan       " Vacancy Indicator
               status      " Status of Vacancy
           into table vac_tab
           from hrp1007
           for all entries in org_tab
           where plvar = c_plan   and
                 otype = c_otype  and
                 istat eq c_pstat and
                 objid = org_tab-objid and
                 begda le p_date and
                 endda ge p_date and
                 vacan eq c_x  and
                 status eq c_stat.
      endif.
      sort vac_tab by plvar otype objid.
    Get the HR data into the rep_tab Internal Table
      loop at vac_tab.
        rep_tab-plans  = vac_tab-objid.
        rep_tab-vacan  = vac_tab-vacan.
        rep_tab-status = vac_tab-status.
        read table org_tab with key objid = vac_tab-objid.
        if sy-subrc = 0.
          rep_tab-kostl = org_tab-kostl.
          rep_tab-plstx = org_tab-plstx.
          rep_tab-orgtx = org_tab-orgtx.
        endif.
        append rep_tab.
        clear  rep_tab.
      endloop.
      loop at rep_tab.
        if not rep_tab-kostl in s_kostl.
          delete rep_tab index sy-tabix.
        endif.
      endloop.
      sort rep_tab by kostl plans.
    delete rep_tab where plstx cs v_str.
    delete rep_tab where orgtx cs v_str1.
    Calculate the Count of Vacancies in each Division
      clear v_cnt.
      loop at rep_tab.
        at end of kostl.
          sy-tabix = sy-tabix - v_cnt.
          rep1_tab-kostl = rep_tab-kostl.
          rep1_tab-cnt   = sy-tabix.
          v_cnt = v_cnt + sy-tabix.
          append rep1_tab.
          clear:rep1_tab.
        endat.
      endloop.
      sort rep1_tab by kostl.
    endform.                  "get_vac_data
    *&      Form append_data
    Append the data into final Internal Table
    form append_data.
      loop at org2_tab.
        rep2_tab-kostl = org2_tab-kostl.
        rep2_tab-app_no = org2_tab-count.
        read table act4_tab with key kostl = org2_tab-kostl
                                     binary search.
        if sy-subrc = 0.
          rep2_tab-nat_no = act4_tab-count1.
        endif.
        read table act5_tab with key kostl = org2_tab-kostl
                                     binary search.
        if sy-subrc = 0.
          rep2_tab-exp_no = act5_tab-count2.
        endif.
        read table rep1_tab with key kostl = org2_tab-kostl
                                     binary search.
        if sy-subrc = 0.
          rep2_tab-vac_no = rep1_tab-cnt.
        endif.
        rep2_tab-tot_no = rep2_tab-nat_no + rep2_tab-exp_no.
        append rep2_tab.
        clear rep2_tab.
      endloop.
      sort rep2_tab by kostl.
    endform.             "append_data
    *&      Form  top_of_page
    Write the Report and Column Headings
    form top_of_page.
      skip.
      format color col_heading on.
      write: /1(108) 'NATIONAL DRILLING COMPANY'(010) centered,
             /1(108) 'Summary of Manning Level Report'(011) centered.
      format color off.
      skip.
      write: /2 'Key Date        :'(013), p_date,
             75 'Report Run Date:'(041), sy-datum.
      if not s_kostl[] is initial.
        if s_kostl-high is initial.
          write: /2 'Cost Center     :'(023), s_kostl-low,
                 75 'Time           :'(042), sy-uzeit.
        else.
          write: /2 'Cost Center From:'(024), s_kostl-low+7(3),
                                    'To'(022), s_kostl-high,
                 75 'Time           :'(042), sy-uzeit.
        endif.
      else.
        write: /75  'Time           :'(042), sy-uzeit.
      endif.
      if not s_plans[] is initial.
        if s_plans-high is initial.
          write: /2 'Position Id     :'(019), s_plans-low,
                 75 'User           :'(043), sy-uname.
        else.
          write: /2 'Position Id From:'(021), s_plans-low,
                              'To'(022), s_plans-high,
                 75 'User           :'(043), sy-uname.
        endif.
      else.
        write: /75 'User           :'(043), sy-uname.
      endif.
      write: /75 'Page No        :'(044), sy-pagno.
      skip.
      write /1(108) sy-uline.
      format color col_heading.
      write:/1 sy-vline,
            12 sy-vline, 53 sy-vline,
            64 sy-vline, 65(32)  'Actual'(018) centered,
            97 sy-vline,108 sy-vline.
      write:/1 sy-vline,  2(10) 'CostCenter'(014),
            12 sy-vline, 13(40) 'Description'(026) centered,
            53 sy-vline, 54(10) 'Approved'(025) centered,
            64 sy-vline, 65(32)  sy-uline,
            97 sy-vline, 98(10) 'Vacancies'(017),
           108 sy-vline.
      write:/1 sy-vline,
            12 sy-vline, 53 sy-vline,
            64 sy-vline, 65(10) 'National'(015) centered,
            75 sy-vline, 76(10) 'Expatriate'(020) centered,
            86 sy-vline, 87(10) 'Total'(016) centered,
            97 sy-vline,108 sy-vline.
      format color off.
      write /1(108) sy-uline.
    endform.               "top_of_page
    *&      Form  Display_report
    Write the Report Output
    form display_report.
      if rep2_tab[] is initial.
        message i999 with
        'No Data found for the entered Selection'(035).
      else.
        loop at rep2_tab.
    Authorization Check for the Orgn and Cost Centers
          perform auth_check_org.
          if sy-subrc = 0.
            clear cskt.
            select single ltext into cskt-ltext from cskt
                where spras = sy-langu and
                      kokrs = c_kokrs and
                      kostl = rep2_tab-kostl.
            format color col_normal.
            write: /1 sy-vline, 2(10) rep2_tab-kostl+7(3),
                   12 sy-vline, 13(40) cskt-ltext,
                   53 sy-vline, 54(10) rep2_tab-app_no,
                   64 sy-vline, 65(10) rep2_tab-nat_no,
                   75 sy-vline, 76(10) rep2_tab-exp_no,
                   86 sy-vline, 87(10) rep2_tab-tot_no,
                   97 sy-vline, 98(10) rep2_tab-vac_no,
                  108 sy-vline.
            format color off.
            at last.
              sum.
              format color 3.
              write /1(108) sy-uline.
              write: /1 sy-vline, 2(10) 'Total'(027),
                     12 sy-vline,
                     53 sy-vline, 54(10) rep2_tab-app_no,
                     64 sy-vline, 65(10) rep2_tab-nat_no,
                     75 sy-vline, 76(10) rep2_tab-exp_no,
                     86 sy-vline, 87(10) rep2_tab-tot_no,
                     97 sy-vline, 98(10) rep2_tab-vac_no,
                    108 sy-vline.
              format color off.
            endat.
          endif.
        endloop.
      endif.
      write /1(108) sy-uline.
    endform.                    " Display_report
    *&      Form  auth_check_org
    Authorization Check for the Orgn and Cost Center
    form auth_check_org.
      authority-check object 'ZNDCHROM'
            id 'PLVAR' dummy
            id 'OTYPE' dummy
            id 'KOSTL' field rep2_tab-kostl.
    endform.                  "auth_check_org
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Any Sample code for recording+playing streaming live video?

    Hi all,
    I'm new to FMS3,
    I wanna create a page for webcam live recording and playing,
    is there any sample code for reference (i can only found the code
    for live recording but do not have live record+play)?
    Many thanks.
    I have installed FMS3.0 and FME2.0 on my machine, so is it
    capable to do so?
    Many thanks.

    Thanks for your reply, but I have another question:
    My live file (test.flv) is recorded under this path:
    C:\xxxx\FMS3\applications\path\streams\_definst_\
    But seems FMS3 can only play video under this path:
    C:\xxxx\FMS3\applications\vod\media\
    My only success is on this source path rtmp://ip/vod/test in
    the component FLVPlayBack.
    So is it happen to all free version of FMS3 or I have to type
    sth more?
    Many thanks.

  • How to write the ABAP code for Datasource Enhancment

    Hi Team,
                  Can you please help me how to write the code for the enhancement i have made to the standard datasource
    i have added the fields ZZPayer and ZZPayer_access.
    I just wanted to know how to write the ABAP code to populate the data for these fields.
    Regards,
    Pradeep P.

    Hi
    From a performance point of view would like to suggest a few changes :
    WHEN '<DS name>'.
      select zzfields from <table> into itab
      for all entries in c_t_data where <condition>.
      If sy_subrc = 0.
    loop at c_t_data assiging f_c_t_data.
    read itab into wa_itab where key = f_c_t_data-key.
    f_c_t_data-zzfield = wa-itab-zzfield.
    endloop.
    refresh itab.
    regards,
    aparna
    endif.

  • Programing paradigm for dynpro enhancements via BADI

    Hi Experts,
    do You know programing paradigm in system for dynpro enhancements via BADI ? I must extend a dynpro with a new subscreen tabstrip via BADI. I know BADI's very well but no in relation with dynpros.
    Thank You in advance
    Peter

    Hi,
    CRM_CUSTOMER_H_BADI  / CRM_CUSTOMER_I_BADI -  To change the name of custom-defined tab in lead either in header or item level.
    hope it helps.
    Regards
    Sidd

Maybe you are looking for

  • MacBook Pro Late 2008 (Unibody) doesn't boot

    Hello, my good old MacBook Pro Late 2008 running Mountain Lion won't boot anymore. The sleep light does not light on, the green battery status indicator light is showing that the battery is full. I had this problem two or three times, and usually my

  • P45D3 Platinum Bios 1.72 Beta

    Should we trust this bios version ? http://drivers.softpedia.com/get/BIOS/Msi/MSI-P45D3-Platinum-Bios-172-Beta.shtml My bios version is 1.6 Because i want my memory (OCZ Gold XTC OCZ3G13332G ) running at 1333MHz, only can run it stable at 1066MHz. He

  • Date profile can control the following document's creation?

    when i create a quotation of contract ,i can see the vaild time in date profile.for eg.the vaild time is from 2009.2.1-2009.2.28. then  i create the contract according to the quotation on 2009.3.1.in my opinion,i think sap crm should give me a warnin

  • Www does not work

    I have on my Mountain Lion Server three sites running, since yesterday. the site of my server, called server.mydomain.com.br (where I have a wiki, calendar amongst other things) The site of the my company is mydomain.com.br and also runs on the machi

  • Retrieving dynamic textfield values

    hi all, i have a frame that contains a button.On clicking the button i create a textfield.Since i am creating it dynamically, i cannot get the value entered into it using "txtfieldobj.getText()" method.Is there any other way to get the value in the t